{"product_id":"ohlins-shock-spring-85-n-mm-190-mm-57-mm-01096-26","title":"Öhlins Shock Spring 85 N\/mm \/ 190 mm \/ Ø 57 mm – 01096-26","description":"\u003cp\u003eÖhlins part number 01096-26 is a shock absorber spring rated at 85 N\/mm, 190 mm long with a 57 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e94 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01096-26\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 85 N\/mm\u003c\/li\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eÖhlins publishes recommended sag figures for its springs, so the setup has a reference rather than a feel. Every unit is dyno-tested against the curve held for its part number, not sampled from a batch. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 190 mm and the inner diameter at 57 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eIf the suspension bottoms out or the geometry collapses under load, this is the direction to go. Firm rates trade some small-bump comfort for support — the right trade on a good surface at speed. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eThe damper can only control the spring it is given; the wrong rate makes every setting a compromise. Öhlins supplies most of its shocks without a spring precisely so the rate can be matched to the rider rather than averaged. Static sag at the rear sets the whole chassis attitude — get it wrong and the front geometry goes with it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAny workshop with the fork or shock in front of it can answer whether this spring fits — the three figures above are all it needs. Öhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider? A spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eThe job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level. Check the free length against the old springs before fitting — a sagged original often measures short. Oil level is measured from the top of the tube with the fork compressed and the spring removed.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: no separate certificate. The spring changes the rate, not the construction of the fork, and is treated as a service part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01096-26\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 85 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 94 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645347029258,"sku":"01096-26","price":435000.0,"currency_code":"PYG","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_95303d66-1096-4fe8-878e-558e980753bf.png?v=1788866696","url":"https:\/\/inter-pace.com\/en-py\/products\/ohlins-shock-spring-85-n-mm-190-mm-57-mm-01096-26","provider":"Inter-Pace","version":"1.0","type":"link"}