{"title":"Suspension service","description":null,"products":[{"product_id":"k-tech-staubkappen-dust-seals-kit-aprilia-rs-660","title":"K-Tech Dust Seals Kit for Aprilia RS 660 (2020-2026) – DSS-005","description":"\u003cp\u003eKeeping your fork legs clean is one of the simplest ways to extend the working life of a front suspension system, and the K-Tech DSS-005 dust seals kit makes it straightforward and affordable for every RS 660 owner. Manufactured by NOK — the same supplier behind OEM KYB-NOK fork seals found on countless production motorcycles — these dust seals are a direct, like-for-like replacement that slot straight in without modification.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured dust seals, the trusted KYB-NOK OEM-grade supplier, for proven durability and dimensional accuracy\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original Aprilia RS 660 dust seals — no adapting, no guesswork\u003c\/li\u003e\n\u003cli\u003ePrecision inner diameter of 41.00 mm ensures a secure, rattle-free fit on each fork leg\u003c\/li\u003e\n\u003cli\u003ePrevents ingress of road grit, trail dust and road debris, protecting the main fork oil seals underneath\u003c\/li\u003e\n\u003cli\u003eStraightforward installation makes routine fork maintenance accessible even in a modest home workshop\u003c\/li\u003e\n\u003cli\u003eKit includes two dust seals, covering both fork legs in one purchase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Long-Term Value\u003c\/h2\u003e\u003cp\u003eThe RS 660 is ridden hard on B-roads, short circuits and commutes alike, and the front forks take the brunt of whatever the road throws at them. Dust and grit that bypass worn dust seals will score the fork stanchions and destroy the main oil seals — a repair that costs considerably more than a timely seal replacement. The DSS-005 kit addresses this at the most practical level: genuine NOK-quality parts at an accessible price point, packaged as a ready-to-fit kit so you can complete a fork service in a single session without hunting for individual components.\u003c\/p\u003e\u003ch3\u003eBuild Quality\u003c\/h3\u003e\u003cp\u003eNOK is a globally recognised manufacturer of precision sealing solutions and supplies components to major suspension manufacturers including KYB. The dust seals in this kit are produced to the same exacting tolerances as the parts fitted at the factory, meaning lip geometry, rubber compound and dimensional accuracy are all equivalent to original specification. The outer diameter of 53.50 mm and the dual-height profile — 4.80 mm and 14.00 mm — correspond exactly to the OEM part geometry for the RS 660 fork assembly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is specifically designed and verified for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation by an authorised K-Tech service centre is recommended to ensure correct fitment and to maintain suspension performance and safety standards.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDSS-005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK (KYB-NOK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e41.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e53.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e4.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003e2x dust seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eAprilia RS 660 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168813244682,"sku":"DSS-005","price":24.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW.png?v=1780816262"},{"product_id":"k-tech-simmerring-oil-seals-kit-aprilia-rs-660","title":"K-Tech Fork Oil Seal Kit for Aprilia RS 660 (2020–2026) – FSS-005","description":"\u003cp\u003ePrecision-engineered by K-Tech and manufactured by NOK — one of the most trusted names in suspension sealing — this fork oil seal kit is the definitive maintenance choice for the Aprilia RS 660. Part number FSS-005 delivers an exact-fit, OEM-grade replacement that restores fork integrity and prevents oil weeping, keeping your suspension performing exactly as the engineers intended across the full 2020–2026 model range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProduced by NOK, the preferred OEM seal supplier for leading Japanese suspension manufacturers — a mark of quality recognised across the industry.\u003c\/li\u003e\n\u003cli\u003eExact-fit replacement for Aprilia RS 660 factory fork seals, eliminating guesswork and fitment concerns.\u003c\/li\u003e\n\u003cli\u003ePrecise dimensions of 41.00 x 53.00 x 8.00\/10.50 mm ensure a flush, leak-free interface with the fork tube.\u003c\/li\u003e\n\u003cli\u003eKit contains two seals, covering both fork legs for a complete, balanced service in a single purchase.\u003c\/li\u003e\n\u003cli\u003eRestores full damping performance and extends fork leg service life by preventing oil contamination of the dust seal and stanchion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Heritage\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has built its reputation on the race circuits of WorldSBK and the British Superbike Championship, and that commitment to precision cascades down to every component in the catalogue — including the consumables. By sourcing fork oil seals from NOK, a manufacturer with decades of OEM supply relationships with the world's foremost suspension builders, K-Tech ensures that FSS-005 meets or exceeds the original Aprilia specification. The dual-lip profile and material compound are selected to resist the thermal cycling and fork oil chemistry found in modern telescopic forks, making these seals equally at home on a track day as on a daily commute.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eA leaking fork seal is more than a cosmetic nuisance — oil migration onto the brake disc and tyre contact patch poses a genuine safety risk. Replacing worn seals with the K-Tech FSS-005 kit returns the RS 660's front end to factory-fresh condition: consistent damping, accurate steering feedback and confidence-inspiring braking. For riders who use their RS 660 on track, where fork loads are significantly higher, the NOK compound's durability provides the assurance that the seal will remain effective throughout a full circuit session.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 – model years 2020, 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify fork tube diameter against the supplied dimensions before installation. If in any doubt, consult an authorised K-Tech service centre prior to fitment.\u003c\/p\u003e\u003cp\u003eInstallation note: fitting fork oil seals requires dedicated seal drivers and a sound understanding of telescopic fork service procedures. K-Tech recommends that this work is carried out by an authorised K-Tech Service Centre to guarantee full performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSS-005\u003c\/li\u003e\n\u003cli\u003eInner diameter: 41.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 53.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight (1): 8.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight (2): 10.50 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eQuantity included: 2 fork oil seals\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168813375754,"sku":"FSS-005","price":22.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS.png?v=1780816264"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-aprilia-rs-660","title":"K-Tech Fork Oil Seal \u0026 Dust Cover Kit – Aprilia RS 660 (2020–2026) FSK-005","description":"\u003cp\u003eWhen lap times matter and fork performance cannot be compromised, the K-Tech FSK-005 fork oil seal and dust cover kit delivers the reliable, precision sealing your Aprilia RS 660 demands on both the track and the road. Manufactured by NOK — the world-leading OEM supplier of fork seals to the major Japanese motorcycle manufacturers — this kit brings factory-grade sealing technology directly to your suspension service.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals: the same supplier trusted by OEM fitment programmes worldwide, chosen for exceptional durability and dimensional accuracy.\u003c\/li\u003e\n\u003cli\u003eComplete sealing solution: two oil seals prevent fork oil loss and maintain consistent damping performance, while two dust covers block dirt, grit and moisture from contaminating the stanchions.\u003c\/li\u003e\n\u003cli\u003ePrecision dimensions of 41.00 mm inner diameter and 53.00 mm outer diameter ensure a correct, leak-free fit in the RS 660 fork legs.\u003c\/li\u003e\n\u003cli\u003eProtects and extends the working life of your fork internals — critical when chasing consistent lap times where damping integrity cannot vary.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Aprilia RS 660 model years 2020 through 2026, covering the full current production run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe difference between a fork that performs at its best and one that feels vague or leaks is almost always traced back to seal condition. NOK's production tolerances are among the tightest in the industry, which is precisely why they supply major motorcycle manufacturers as standard equipment. The oil seals in this kit maintain the hydraulic integrity of the fork, keeping damping curves consistent whether you are braking hard into a chicane or absorbing road imperfections on a canyon run. The dust covers act as the first line of defence, stripping contaminants from the stanchion surface before they can reach the oil seal lip and cause accelerated wear.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eFork seal replacement requires specialist tools and technical knowledge to ensure correct seating depth and assembly torque. K-Tech recommends having this kit installed at an authorised K-Tech Service Centre to guarantee optimum functionality and safety.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the Aprilia RS 660, model years 2020 to 2026.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 41.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 53.00 mm\u003c\/li\u003e\n\u003cli\u003eContents: 2x oil seals, 2x dust covers\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003ePart number: FSK-005\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168813408522,"sku":"FSK-005","price":39.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit.png?v=1780816267"},{"product_id":"k-tech-gleitbuchsen-kit-aprilia-rs-660","title":"K-Tech Fork Slide Bush Kit for Aprilia RS 660 (2020–2026) GBS-014","description":"\u003cp\u003ePrecision-engineered from hardened steel with a copper coating and PTFE-lined contact surfaces, the K-Tech GBS-014 fork slide bush kit is the upgrade your Aprilia RS 660's front end deserves. Manufactured to exact OEM dimensions, these bushes replace the factory items with superior materials that deliver smoother fork action and a meaningful reduction in friction over the life of the component.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper coating for outstanding durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces minimise friction and deliver noticeably smoother fork travel\u003c\/li\u003e\n\u003cli\u003eMachined to exact OEM tolerances — a direct, no-modification replacement for the Aprilia RS 660\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, covering both fork legs in a single purchase\u003c\/li\u003e\n\u003cli\u003ePremium K-Tech quality, trusted by professional suspension technicians worldwide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eWhere standard replacement bushes often rely on plain steel or basic polymer liners, the GBS-014 combines a hardened steel core with a copper intermediate coating before the final PTFE friction surface. This three-layer construction addresses the root causes of fork stiction: metal-to-metal contact, surface corrosion, and lubricant breakdown. The result is a fork that moves with the same consistency on lap fifty as it does on lap one — whether you are threading through mountain roads or pushing hard on a track day.\u003c\/p\u003e\u003cp\u003eEach bush is machined to precise dimensional tolerances, ensuring a correct interference fit in the fork tube without the need for reworking or shimming. The inner diameter of 41.00 mm and outer diameter of 46.00 mm match the original Aprilia specification exactly, while the 12.00 mm height and 2.50 mm wall thickness replicate the OEM geometry in full.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eFitting these bushes requires fork disassembly, specific suspension tooling, and a working knowledge of front suspension systems. K-Tech recommends installation be carried out by an authorised K-Tech service centre to ensure correct fitting and to preserve suspension performance and rider safety.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Tech GBS-014 slide bush kit is designed specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eGBS-014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e41.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e46.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e12.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel with copper coating and PTFE-lined contact surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity supplied\u003c\/td\u003e\n\u003ctd\u003e2 (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 660 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168813441290,"sku":"GBS-014","price":15.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT.png?v=1780816271"},{"product_id":"k-tech-gleitbuchsen-kit-aprilia-rs-660-sbs-009","title":"K-Tech Fork Slide Bushing Kit for Aprilia RS 660 (2020–2026) SBS-009","description":"\u003cp\u003eKeeping your Aprilia RS 660's front fork performing at its best doesn't require a full suspension rebuild. The K-Tech SBS-009 slide bushing kit is a straightforward, cost-effective maintenance solution that restores precise fork action on RS 660 models from 2020 to 2026 — made to exact OEM dimensions so fitment is never in question.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with a copper coating for long service life and reliable corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces minimise friction, restoring the smooth and sensitive fork response the RS 660 is known for\u003c\/li\u003e\n\u003cli\u003eMachined to exact OEM dimensions — inner diameter 39.70 mm, outer diameter 41.70 mm, height 20.00 mm, wall thickness 1.00 mm — ensuring a direct, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eComplete two-bushing set covers a full fork service in a single purchase\u003c\/li\u003e\n\u003cli\u003eA practical, affordable maintenance item that extends fork life and avoids costly premature wear to stanchions and seals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eK-Tech's fork bushings are produced from hardened steel, then copper-coated to add a sacrificial layer that protects against corrosion and micro-scoring during normal use. The PTFE treatment on the sliding contact faces reduces static and dynamic friction, which is the primary cause of that characteristic fork stiction that blunts initial suspension response. The result is a fork that moves freely through its stroke from the very first millimetre of travel — valuable both on the morning commute and on a weekend trackday.\u003c\/p\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eWorn fork bushings rarely announce themselves dramatically; instead you notice a gradual vagueness in front-end feel, increased stiction over small bumps, and eventually oil seal failures caused by the sloppy fit. Replacing bushings at regular service intervals with a quality item like the SBS-009 is far less expensive than replacing fork seals, wipers, or worse, refinishing scored stanchions. With accurate dimensions and a straightforward drop-in design, a competent technician can complete the job efficiently using standard fork service tooling — though K-Tech recommends the work be carried out by an authorised K-Tech service centre where specialist tools and expertise are available.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Tech SBS-009 is designed exclusively for the Aprilia RS 660 (2020–2026). It is not a universal part — do not fit to any other model or year range.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 39.70 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 41.70 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 20.00 mm\u003c\/li\u003e\n\u003cli\u003eWall thickness: 1.00 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: hardened steel with copper coating and PTFE-coated contact surfaces\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 bushings per set\u003c\/li\u003e\n\u003cli\u003ePart number: SBS-009\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168813572362,"sku":"SBS-009","price":19.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT2.png?v=1780816280"},{"product_id":"k-tech-gleitbuchsen-kit-aprilia-rsv4","title":"K-Tech Fork Slider Bushing Kit – Aprilia RSV4 \/ Tuono V4 (2009–2026) GBS-018","description":"\u003cp\u003eSmooth, precise fork action underpins every aspect of a confident ride, and the K-Tech GBS-018 slider bushing kit delivers exactly that for Aprilia RSV4 and Tuono V4 owners. Engineered to OEM dimensions, this kit replaces worn fork guide bushings with components built for long-term durability and low-friction performance — keeping your front-end feeling planted and responsive mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel shell with copper coating resists corrosion and handles the sustained loads of road and track riding without premature wear.\u003c\/li\u003e\n\u003cli\u003ePTFE contact surfaces reduce friction to a minimum, ensuring the fork glides smoothly through its full travel with no stiction or binding.\u003c\/li\u003e\n\u003cli\u003eManufactured to exact OEM specifications for a precise, rattle-free fit that restores factory-standard fork geometry.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair so you can carry out a complete bushing refresh in one service — no partial replacements, no unbalanced feel.\u003c\/li\u003e\n\u003cli\u003eWide fitment coverage spanning Aprilia RSV4 and Tuono V4 models from 2009 through 2026, including APRC, RF, RR, and 1100 Factory variants.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction \u0026amp; Performance\u003c\/h2\u003e\u003cp\u003eThe GBS-018 bushings combine a hardened steel body with a copper intermediate layer that distributes load evenly and protects against fretting corrosion where steel-on-steel contact would otherwise accelerate wear. The inner bearing surface carries a PTFE liner that dramatically lowers the coefficient of friction, translating directly into a more supple fork action. Whether you are chasing lap times at the circuit or covering long distances on the road, the result is a front end that tracks accurately and absorbs bumps without the harshness that tired, worn bushings introduce.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 1000 Factory (2009–2011)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1000 Factory APRC (2011–2015)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1000 RF (2015–2019)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia Tuono 1000 R (2004)\u003c\/li\u003e\n\u003cli\u003eAprilia Tuono 1000 R Factory (2006–2010)\u003c\/li\u003e\n\u003cli\u003eAprilia Tuono V4 1100 Factory (2015–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out exclusively by an authorised K-Tech Service Centre. Professional fitting is critical to ensure correct fork function and rider safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eInner diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e46.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e1.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eGBS-018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168814424330,"sku":"GBS-018","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_99cc4ec2-a692-4ab0-8b11-c03e7f9e49ba.png?v=1780816320"},{"product_id":"k-tech-staubkappen-dust-seals-kit-aprilia-rsv4","title":"K-Tech Dust Seals Kit for Aprilia RSV4\/1100 Factory\/R\/RR\/RF (2009–2026) – DSS-017","description":"\u003cp\u003ePrecision-made from NOK rubber compound, the K-Tech DSS-017 dust seals kit delivers the kind of fork protection that the Aprilia RSV4 platform genuinely deserves. NOK is the Japanese sealing specialist trusted by OEM manufacturers worldwide, and these direct-fit dust seals bring that same exacting standard to your front fork as a replacement or service item — whether you ride road or track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured rubber compound: a globally respected Japanese seal maker whose materials outlast generic alternatives in both heat cycling and abrasion resistance.\u003c\/li\u003e\n\u003cli\u003eDirect OEM-specification replacement: dimensionally identical to the factory fit, so installation is straightforward with no modification required.\u003c\/li\u003e\n\u003cli\u003eFull environmental barrier: seals out road grime, dust, and moisture before they can migrate past the fork oil seals and cause premature wear.\u003c\/li\u003e\n\u003cli\u003eExtended fork service life: keeping contamination away from the inner stanchions and oil seals reduces friction, maintains damping consistency, and delays costly strip-downs.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair: both fork legs covered in one kit, part number DSS-017.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe DSS-017 kit is where material choice makes a meaningful difference. NOK's rubber formulation is engineered to remain flexible across a wide temperature range — from cold early-morning starts to sustained track sessions where fork heat builds quickly. The lip geometry holds a precise, consistent contact pressure against the stanchion surface, wiping contamination cleanly without imposing additional friction that would dull the fork's response. At 43.00 mm inner diameter with a 55.50 mm outer diameter, these seals are machined to exact tolerances that ensure positive seating in the fork slider housing.\u003c\/p\u003e\u003ch2\u003eFork Maintenance and Performance\u003c\/h2\u003e\u003cp\u003eFork dust seals are a maintenance item that is easy to overlook until the damage is already done. Grit that passes a worn dust seal acts as a lapping compound against the hard-chrome or DLC-coated stanchion, scoring the surface and accelerating oil seal failure. Fitting fresh NOK seals at each oil-seal service interval is the simplest insurance policy for an otherwise expensive front-end rebuild. For RSV4 owners who track their machines, the return on this investment is felt immediately in consistent, repeatable damping that does not degrade lap to lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Tech DSS-017 fits the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRSV4 1000 Factory (2009–2011)\u003c\/li\u003e\n\u003cli\u003eRSV4 1000 Factory APRC (2011–2015)\u003c\/li\u003e\n\u003cli\u003eRSV4 1000 RF (2015–2019)\u003c\/li\u003e\n\u003cli\u003eRSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003cli\u003eTuono 1000 R (2004)\u003c\/li\u003e\n\u003cli\u003eTuono 1000 R Factory (2006–2010)\u003c\/li\u003e\n\u003cli\u003eTuono V4 1100 Factory (2015–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech service centre to ensure correct seating and to preserve fork performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eDSS-017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e55.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (1)\u003c\/td\u003e\n\u003ctd\u003e4.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (2)\u003c\/td\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 dust seals (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK (Japan)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168814489866,"sku":"DSS-017","price":25.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS2NEW.png?v=1780816321"},{"product_id":"k-tech-simmerring-oil-seals-kit-aprilia-rsv4-fss-021","title":"K-Tech Fork Oil Seal Kit Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026) FSS-021","description":"\u003cp\u003eSuspension integrity on the Aprilia RSV4 and RSV4 1100 begins with seals that can handle the demands of both road and track. The K-Tech FSS-021 oil seal kit is manufactured by NOK — the supplier of choice for leading Japanese suspension manufacturers worldwide — and brings that same engineering rigour directly to your fork service. When only factory-grade materials will do, this is the kit that delivers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals, chosen by premier Japanese suspension OEMs for their exceptional durability and consistent sealing performance\u003c\/li\u003e\n\u003cli\u003eDirect OEM-equivalent replacement — precise dimensional match ensures no compromise in damping characteristics or seal life\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair so both fork legs are serviced simultaneously, maintaining balanced suspension action\u003c\/li\u003e\n\u003cli\u003ePrecision dimensions of 43.00 x 55.10 x 11.00\/14.00 mm guarantee a factory-correct fit in the RSV4 fork tubes\u003c\/li\u003e\n\u003cli\u003eEffective dual-lip construction keeps fork oil in and road contamination out, preserving smooth, consistent damping over the long term\u003c\/li\u003e\n\u003cli\u003eCovers all RSV4 and RSV4 1100 variants — Factory, R, RR and RF — across the full 2009–2026 production span\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe defining characteristic of the FSS-021 kit is provenance. NOK is not a generic aftermarket supplier; they are the original-equipment seal manufacturer behind many of the world's most respected suspension units. Their production process demands tight dimensional tolerances and compound consistency that cheaper alternatives cannot match. The result is a seal that seats cleanly, resists premature wear and maintains its lip profile across temperature cycles — from cold pre-dawn warm-ups to sustained track sessions where fork temperatures climb significantly.\u003c\/p\u003e\u003cp\u003eFor the Aprilia RSV4 platform — a chassis known for precise, reactive front-end feel — this level of manufacturing quality is not a luxury. A weeping fork seal introduces unwanted variables into suspension behaviour and contaminates the brake disc if left unaddressed. Fitting seals of this calibre during a fork service eliminates those risks and restores the front end to the condition it left the factory in.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation of fork oil seals requires specialised tools and a working knowledge of suspension servicing procedures. K-Tech recommends that fitting is carried out by an authorised K-Tech Service Centre to ensure full performance and safety of the product.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Tech FSS-021 seal kit is designed as a direct replacement for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 R — 2009 to 2015\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory — 2009 to 2015\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2015 to 2020\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF — 2015 to 2020\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 — 2019 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2019 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 55.10 mm\u003c\/li\u003e\n\u003cli\u003eHeight (1): 11.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight (2): 14.00 mm\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 oil seals per kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168814522634,"sku":"FSS-021","price":33.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_76f204c6-dbcf-4249-8709-53acbdf4de79.png?v=1780816321"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-aprilia-rsv4","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit – Aprilia RSV4 \/ 1100 Factory \/ R \/ RR \/ RF (2009–2026) FSK-021","description":"\u003cp\u003eEngineered to the exacting standards that K-Tech's suspension programmes demand, this fork oil seal and dust cap kit delivers a precision-fit, long-service replacement for the Aprilia RSV4 family. The seals are manufactured by NOK — the globally recognised Japanese specialist whose oil seal technology is trusted by every major OEM — ensuring the same standard of sealing integrity you would expect from the factory, with the added reassurance of a part sourced specifically for this application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured oil seals: industry benchmark for fork seal quality, durability and consistent performance across temperature ranges\u003c\/li\u003e\n\u003cli\u003ePrecision inner diameter of 43.00 mm and outer diameter of 55.00 mm for a correct, leak-free press fit\u003c\/li\u003e\n\u003cli\u003eDust caps included to shield the fork internals from road grit, moisture and debris — extending service intervals\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement: no modification required, fits the RSV4 and Tuono fork legs straight from the box\u003c\/li\u003e\n\u003cli\u003eComplete kit — two oil seals and two dust caps — covering both fork legs in a single purchase\u003c\/li\u003e\n\u003cli\u003ePart number FSK-021 for unambiguous cross-referencing and warranty traceability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage, Finish and Design\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has built its reputation across World Superbike and British Superbike paddocks on the principle that every component in the fork assembly matters. The FSK-021 kit reflects that philosophy: NOK's seal compound is chosen not simply because it meets minimum specifications, but because decades of OEM supply to Japanese manufacturers have proven its resistance to oil degradation and its ability to maintain a consistent wipe across a hard-anodised fork leg. The dust caps are profiled to sit flush with the fork leg surface, preserving the clean aesthetic of the RSV4's front end whilst performing the unglamorous but essential job of keeping contamination away from the seal lip.\u003c\/p\u003e\u003ch2\u003ePerformance and Reliability\u003c\/h2\u003e\u003cp\u003eA weeping fork seal is more than a cosmetic problem — oil migration onto the brake disc is a safety-critical failure on a machine as capable as the RSV4. The NOK seal used in this kit uses a precision-ground lip geometry that maintains contact pressure against the fork stanchion throughout the full range of suspension travel, whether the bike is being ridden on a fast road or pressed hard through the braking zones at a circuit. Pairing the oil seal with the matching dust cap is the correct approach: the dust cap acts as the first line of defence, and reducing contamination at that stage directly extends the working life of the seal behind it.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2019–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech Service Centre using the correct fork seal driver and associated tooling. Improper installation can damage the seal lip and compromise fork performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-021\u003c\/li\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 55.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eKit contents: 2x oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eApplication: front fork oil seals and dust caps\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ 1100 Factory \/ R \/ RR \/ RF (2009–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168814588170,"sku":"FSK-021","price":52.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_52503066-c38f-428c-af0a-1da193aa685e.png?v=1780816322"},{"product_id":"k-tech-gleitbuchsen-kit-aprilia-rsv4-1100-gbs-019","title":"K-Tech Fork Slide Bushing Kit – Aprilia RSV4 \/ Tuono V4 (2004–2026) GBS-019","description":"\u003cp\u003eThe K-Tech GBS-019 slide bushing kit is built to a standard the OEM part was never designed to match. Hardened steel construction with a copper undercoat and a PTFE contact surface means each bushing resists wear longer, moves more freely, and keeps your Aprilia's fork action precise through every compression and rebound cycle. If you are rebuilding suspension or chasing a smoother, more responsive front end, this is the component that makes the difference.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel core with copper coating delivers exceptional resistance to wear and corrosion under continuous fork movement\u003c\/li\u003e\n\u003cli\u003ePTFE-lined contact surfaces minimise friction between the inner and outer fork tubes, improving fork sensitivity and overall handling feel\u003c\/li\u003e\n\u003cli\u003eManufactured to OEM dimensions for a direct, like-for-like fitment — no modification or special adaptation required\u003c\/li\u003e\n\u003cli\u003ePrecision tolerances held throughout: 43.00 mm inner diameter, 46.00 mm outer diameter, 15.00 mm height, 2.00 mm wall thickness\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete two-bushing kit so both legs of the fork are rebuilt to the same standard in a single service\u003c\/li\u003e\n\u003cli\u003eCompatible with over 17 years of Aprilia RSV4 and Tuono V4 production — from the original 2009 Factory through the 2026 RSV4 1100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction \u0026amp; Material Quality\u003c\/h2\u003e\u003cp\u003eK-Tech engineered the GBS-019 around hardened steel rather than the softer alloy used in many aftermarket alternatives. The hardened steel substrate provides the structural rigidity needed to maintain dimensional accuracy over thousands of kilometres of road and track use. A copper intermediate layer bonds cleanly to the steel and acts as a sacrificial barrier that absorbs micro-loads before they reach the core material. The outer PTFE surface layer is the detail that most directly affects how your fork feels: it drastically reduces the static and dynamic friction that causes stiction, that frustrating hesitation at the beginning of fork travel that dulls feedback and masks road textures. The result is a fork that tracks, dips, and recovers the way it was designed to.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eStiction in a fork is one of the hardest suspension flaws to diagnose because it mimics poor spring or damper setup. Replacing worn or inferior slide bushings with the GBS-019 set often transforms a fork that feels vague or inconsistent into one that responds crisply to both brake inputs and mid-corner bumps. On track, where the RSV4 and Tuono V4 spend a meaningful portion of their lives, the margin between a fork that tracks and one that deflects is measured in lap time and rider confidence. The PTFE lining maintains its low-friction characteristics even under the heat generated by sustained hard braking and rapid suspension cycling.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is a confirmed direct replacement for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRSV4 1000 Factory (2009–2011)\u003c\/li\u003e\n\u003cli\u003eRSV4 1000 Factory APRC (2011–2015)\u003c\/li\u003e\n\u003cli\u003eRSV4 1000 RF (2015–2019)\u003c\/li\u003e\n\u003cli\u003eRSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003cli\u003eTuono 1000 R (2004)\u003c\/li\u003e\n\u003cli\u003eTuono 1000 R Factory (2006–2010)\u003c\/li\u003e\n\u003cli\u003eTuono V4 1100 Factory (2015–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires specialist tools and suspension knowledge. K-Tech recommend fitting to be carried out at an authorised K-Tech Service Centre to ensure correct assembly and optimal chassis performance.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: GBS-019\u003c\/li\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 46.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15.00 mm\u003c\/li\u003e\n\u003cli\u003eWall thickness: 2.00 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: hardened steel with copper coating and PTFE lining\u003c\/li\u003e\n\u003cli\u003eContents: 2 slide bushings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168814883082,"sku":"GBS-019","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_7a80ffef-ebc6-43ab-8e51-064517b089f6.png?v=1780816341"},{"product_id":"k-tech-federbein-service-kit-aprilia-rsv4","title":"K-Tech Shock Absorber Service Kit – Aprilia RSV4\/RR\/RF\/1100 Factory (2017–2026) 205-200-030","description":"\u003cp\u003eEngineered by K-Tech Suspension — one of the most respected names in precision suspension engineering — this service kit is the definitive rebuild solution for the rear shock absorber fitted to the Aprilia RSV4 family. Every component is manufactured to match or exceed original K-Tech tolerances, restoring the crisp, confidence-inspiring damping that defines these Italian superbikes and keeping them performing exactly as the factory intended, lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete rebuild kit containing every seal, bushing and fastener required for a professional shock absorber overhaul\u003c\/li\u003e\n\u003cli\u003eOil seal provides a precision-tight barrier against fluid loss and pressure drop\u003c\/li\u003e\n\u003cli\u003eDust seal shields the piston rod from road contamination and abrasive particles\u003c\/li\u003e\n\u003cli\u003ePiston rod bushing ensures accurate rod guidance and lateral stability throughout the stroke\u003c\/li\u003e\n\u003cli\u003eComprehensive O-ring set delivers reliable sealing across all internal interfaces\u003c\/li\u003e\n\u003cli\u003eNew piston rod locking nut included for safe, correct reassembly torque retention\u003c\/li\u003e\n\u003cli\u003eAll parts match or surpass OEM K-Tech specification for long-service reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has built its reputation supplying suspension components to World Superbike and BSB teams, and that motorsport heritage flows directly into every service kit bearing the K-Tech name. The internal dimensions — 42.00 mm inner diameter and 14.00 mm outer diameter — are held to exacting tolerances, reflecting the same manufacturing discipline applied to K-Tech's race-homologated components. This is not a generic aftermarket rebuild pack; it is a purpose-designed kit matched precisely to the shock absorber architecture of the RSV4 platform.\u003c\/p\u003e\u003ch2\u003ePerformance and Longevity\u003c\/h2\u003e\u003cp\u003eOver time, shock absorber seals degrade, oil migrates past worn surfaces, and the precise damping characteristics that make the RSV4 so rewarding to ride begin to erode. Rebuilding with this kit — part number 205-200-030 — arrests that deterioration at source. Fresh seals eliminate fluid weepage, a new bushing restores rod geometry, and a correctly torqued locking nut ensures structural integrity. The result is a shock that behaves as it did when new, whether you are threading through traffic or chasing lap times at a circuit day.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis service kit is designed for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 1000 RF (2017–2019)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia Tuono V4 1100 Factory (2019–2020) — original TTX36 42\/14 specification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eShock absorber servicing requires specialist tooling and technical knowledge. For optimum safety and to ensure the shock is rebuilt to the correct performance standard, K-Tech recommends installation and servicing by an authorised K-Tech Service Centre.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 205-200-030\u003c\/li\u003e\n\u003cli\u003eInner diameter: 42.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 14.00 mm\u003c\/li\u003e\n\u003cli\u003eCompatible shock: TTX36 (42\/14 specification)\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 RF, RSV4 RR, RSV4 1100 Factory, Tuono V4 1100 Factory\u003c\/li\u003e\n\u003cli\u003eModel years: 2017–2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168815112458,"sku":"205-200-030","price":31.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVIESET.png?v=1780816345"},{"product_id":"k-tech-simmerring-oil-seals-kit-bmw-k46","title":"K-Tech Fork Oil Seal Kit BMW S1000RR K46 (2009-2018) FSS-024","description":"\u003cp\u003eWhen your BMW S1000RR K46 is being pushed hard on track, fork seal integrity is non-negotiable. The K-Tech FSS-024 oil seals kit pairs NOK-manufactured seals with SACHS engineering expertise to deliver a direct OEM replacement that matches — and in service life often exceeds — the factory specification. Whether you're rebuilding after a season of circuit work or carrying out preventive maintenance before the next race weekend, this kit restores full fork performance and keeps oil where it belongs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals developed in collaboration with SACHS — the same supply chain that underpins OEM fork assembly quality\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the original seals on the BMW S1000RR K46, no modification required\u003c\/li\u003e\n\u003cli\u003ePrecision dimensions (46.00 mm inner diameter, 58.00 mm outer diameter) ensure a leak-free fit within the fork leg\u003c\/li\u003e\n\u003cli\u003eDual-height profile — 8.50 mm and 11.50 mm — replicates the original seal geometry for correct oil retention and dust exclusion\u003c\/li\u003e\n\u003cli\u003eKit includes two oil seals, covering both fork legs in a single purchase\u003c\/li\u003e\n\u003cli\u003eProtects against oil loss and contamination that degrades damping consistency under repeated braking and cornering loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track and Road\u003c\/h2\u003e\u003cp\u003eA weeping fork seal is more than a cosmetic issue — oil migrating onto the brake disc or tyre is a safety hazard at any speed, and it is especially dangerous during the aggressive braking zones and high-speed direction changes that characterise circuit riding. The K-Tech FSS-024 kit uses high-grade NOK compounds selected for their resistance to the thermal cycling that race use imposes on fork internals. The result is consistent damping response lap after lap, with no progressive degradation caused by escaping fork oil.\u003c\/p\u003e\u003cp\u003eOn the road, the same properties translate into predictable front-end feedback and reduced maintenance intervals. Riders who commute or tour on their S1000RR benefit from the peace of mind that comes with a seal specification originally chosen for racing-derived machinery.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the BMW S1000RR K46 manufactured between 2009 and 2018. Verify your model year before fitting. Installation requires specialist tools and fork-service knowledge; K-Tech recommend fitting be carried out by an authorised K-Tech Service Centre.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSS-024\u003c\/li\u003e\n\u003cli\u003eInner diameter: 46.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 58.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight 1: 8.50 mm\u003c\/li\u003e\n\u003cli\u003eHeight 2: 11.50 mm\u003c\/li\u003e\n\u003cli\u003eQuantity: 2x oil seals (one per fork leg)\u003c\/li\u003e\n\u003cli\u003eManufacturer: NOK (developed with SACHS)\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168815702282,"sku":"FSS-024","price":36.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_9f54a68d-6a44-40b6-9635-4cbadf96021d.png?v=1780816368"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-bmw-k46","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit BMW S1000RR K46 (2009–2018) FSK-024","description":"\u003cp\u003ePrevent fork oil loss before it compromises your front suspension. The K-Tech FSK-024 fork oil seal and dust cap kit pairs precision-engineered NOK seals with dedicated dust caps to restore full sealing integrity to the BMW S1000RR K46 (2009–2018) — keeping contamination out and fork oil exactly where it belongs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-sourced oil seals — a brand trusted by leading Japanese suspension manufacturers as original equipment, chosen for their dimensional accuracy and long service life.\u003c\/li\u003e\n\u003cli\u003eComplete paired set: two oil seals and two dust caps cover both fork legs in a single purchase.\u003c\/li\u003e\n\u003cli\u003eInner diameter of 46.00 mm and outer diameter of 58.00 mm are matched precisely to S1000RR K46 fork tube specifications — no trimming, no compromise on fit.\u003c\/li\u003e\n\u003cli\u003eDust caps form the first line of defence against road grit, water, and debris that accelerate seal wear and degrade fork action.\u003c\/li\u003e\n\u003cli\u003eDirect OEM-specification replacement minimises installation time and eliminates guesswork during a fork service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eNOK is one of the world's foremost manufacturers of sealing components for suspension systems. Their oil seals are found on the production lines of many Japanese fork manufacturers because the dimensional tolerances, lip geometry, and compound specification consistently meet or exceed OEM standards. Choosing NOK-derived seals for your S1000RR means you are fitting a component built to the same reliability benchmark as the unit that left the factory — not a generic aftermarket substitute.\u003c\/p\u003e\u003cp\u003eK-Tech has packaged these seals under part number FSK-024 specifically for the K46 chassis, so you can be confident the sealing geometry is correct for the fork tube and outer tube dimensions used across the 2009–2018 model run.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Use\u003c\/h2\u003e\u003cp\u003eWhether the bike sees daily road riding or regular track days, a weeping fork seal is not merely an inconvenience — oil on a brake disc or tyre represents a genuine safety risk. Replacing seals at the first sign of film or weeping restores the hydraulic damping characteristics K-Tech suspension is calibrated around, keeping rebound and compression response consistent lap after lap or mile after mile.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eK-Tech recommends installation by an authorised K-Tech Service Centre. Correct fitting requires specialist tools and technical knowledge to ensure maximum performance and safety. Attempting installation without the appropriate seal driver and fork-specific tooling risks damaging the new seals or scoring the fork tubes.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K46 — model years 2009 to 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-024\u003c\/li\u003e\n\u003cli\u003eInner diameter: 46.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 58.00 mm\u003c\/li\u003e\n\u003cli\u003eContents: 2x fork oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168816161034,"sku":"FSK-024","price":59.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_84f6034b-1add-46b6-915b-807dcb2c9d67.png?v=1780816372"},{"product_id":"k-tech-staubkappen-dust-seals-kit-bmw-k46","title":"K-Tech Dust Seals Kit BMW S1000RR K46 (2009–2018) DSS-027","description":"\u003cp\u003ePrecision-engineered by K-Tech and manufactured from NOK compound, the DSS-027 dust seal kit is the definitive fork protection upgrade for the BMW S1000RR K46. Conceived as a direct OEM replacement, these seals carry the design integrity and material heritage that K-Tech's suspension programme is built upon — clean, purposeful components that keep road grime, moisture and abrasive dust well away from your fork internals for the long haul.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM-specification replacement for the BMW S1000RR K46 (2009–2018), guaranteeing a precise, rattle-free fit without modification\u003c\/li\u003e\n\u003cli\u003eManufactured from NOK compound — a material renowned across the motorsport and OEM sectors for its durability, elasticity and resistance to contamination\u003c\/li\u003e\n\u003cli\u003eDimensioned to 46.00 mm inner diameter and 58.50 mm outer diameter, matching the factory fork tube geometry exactly\u003c\/li\u003e\n\u003cli\u003eDual-height profile (5.00 mm \/ 10.00 mm) creates a layered barrier that actively wipes debris from the fork leg before it can reach the oil seal\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair — both fork legs covered in a single purchase\u003c\/li\u003e\n\u003cli\u003eK-Tech's trusted suspension heritage means consistent quality control from the same brand behind race-proven cartridge and shock technology\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eK-Tech has spent decades refining suspension components for road and track, and even a component as elemental as a dust seal reflects that culture. The DSS-027 is not a generic aftermarket seal dressed up in branded packaging — it is a purpose-profiled part built to K-Tech's own exacting tolerances, using NOK as the compound of choice because its performance characteristics are proven across decades of suspension engineering. The result is a seal that installs cleanly, seats consistently and retains its profile through sustained road and track use. Where lesser substitutes harden, crack or allow ingress under repeat heat cycles, the NOK compound maintains its wiper action to protect the fork oil seal underneath.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eOn the BMW S1000RR K46 — a platform ridden hard both on the street and at circuit days — fork seal integrity is critical. A compromised dust seal allows fine particulate to migrate toward the oil seal, accelerating wear and eventually leading to oil leakage. Fitting the K-Tech DSS-027 kit as a preventative measure or as part of a fork service restores that first line of defence and meaningfully extends the service interval of the oil seals themselves. The investment is modest; the protection it affords your fork internals is substantial.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is specifically engineered for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K46 — model years 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNot suitable for other BMW models or S1000RR generations outside the K46 frame designation. If you are unsure whether this kit applies to your machine, please contact the Inter-Pace team before ordering.\u003c\/p\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech service centre. Specialist tooling and techniques are required to ensure correct fitment, performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDSS-027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal Material\u003c\/th\u003e\n\u003ctd\u003eNOK compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e46.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e58.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e5.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e10.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity Supplied\u003c\/th\u003e\n\u003ctd\u003e2 dust seals (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168816193802,"sku":"DSS-027","price":26.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_675679ba-51e3-4db6-a513-125ab2cc8147.png?v=1780816374"},{"product_id":"k-tech-gleitbuchsen-kit-bmw-s10000rr-k46","title":"K-Tech Fork Slide Bush Kit BMW S1000RR K46 (2009–2018) GBS-027-15","description":"\u003cp\u003ePrecision-engineered from hardened steel with a copper coating and PTFE-lined contact surfaces, the K-Tech GBS-027-15 slide bush kit sets a measurably higher standard than OEM replacements for the BMW S1000RR K46. Every detail of the construction is aimed at smoother fork movement, sharper initial response and longer service life — exactly what serious riders and race-prep technicians demand from a suspension rebuild.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper coating for outstanding durability and corrosion resistance under repeated fork cycling\u003c\/li\u003e\n\u003cli\u003ePTFE-lined contact surfaces reduce friction dramatically, giving the fork a more supple, responsive feel across all road and track conditions\u003c\/li\u003e\n\u003cli\u003eDirect OEM-equivalent dimensions (46.00 mm inner diameter, 50.00 mm outer diameter, 15.00 mm height, 2.00 mm wall thickness) for a precise, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eComplete set of two bushes covers both fork legs in a single service interval\u003c\/li\u003e\n\u003cli\u003ePart number GBS-027-15 manufactured to K-Tech's exacting quality standards, used worldwide by professional suspension technicians\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe choice of hardened steel as the base material is deliberate: it resists deformation under the lateral loads generated during hard braking and cornering, retaining its geometry far longer than softer alloy alternatives. The copper coating acts as a secondary protective layer, guarding against micro-corrosion where fork oil, moisture and road contaminants inevitably find their way. Overlaying both is a PTFE surface treatment on every contact face, bringing the coefficient of friction down to a level that lets the fork respond to even the smallest road inputs without stiction or hesitation.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eWorn or degraded fork slide bushes are one of the most overlooked causes of vague steering feel and inconsistent braking performance. Replacing them with the K-Tech GBS-027-15 kit restores the tight tolerances the S1000RR's suspension geometry relies on, resulting in more predictable turn-in, better mid-corner stability and more confident braking. Whether the bike is used daily on challenging roads or pushed hard on circuit, the PTFE-to-steel interface keeps stiction to a minimum lap after lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe GBS-027-15 is designed exclusively for the BMW S1000RR K46 produced from 2009 to 2018. It is a direct replacement for the original front fork guide bushes on that platform and fits no other model. Installation requires specialist tooling and suspension knowledge; K-Tech recommends fitting by an authorised K-Tech Service Centre to ensure correct seating and to avoid damage to fork tubes or seals.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 46.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 50.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15.00 mm\u003c\/li\u003e\n\u003cli\u003eWall thickness: 2.00 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: hardened steel with copper coating and PTFE contact surfaces\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 slide bushes per kit\u003c\/li\u003e\n\u003cli\u003ePart number: GBS-027-15\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168816226570,"sku":"GBS-027-15","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_345c2284-02f1-45b6-9ce6-7b54a4216385.png?v=1780816375"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-bmw-k67","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit BMW S1000RR K67 (2019-2026) FSK-026","description":"\u003cp\u003eKeeping your front fork in peak condition is one of the most cost-effective maintenance steps you can make, and the K-Tech FSK-026 fork seal and dust cap kit gives the BMW S1000RR K67 (2019–2026) exactly the protection it deserves. Manufactured by NOK — the supplier of choice for leading Japanese suspension manufacturers as original equipment — these seals deliver the kind of fit and longevity that keep your chassis performing consistently mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured oil seals: the same quality standard found in OE suspension from top Japanese manufacturers, offering exceptional durability and sealing reliability.\u003c\/li\u003e\n\u003cli\u003eComplete kit includes two oil seals and two dust caps, covering both fork legs in a single purchase — no hunting for individual components.\u003c\/li\u003e\n\u003cli\u003ePrecise 45 mm inner diameter and 58 mm outer diameter geometry ensures a correct, leak-free fit against the S1000RR K67 fork tubes.\u003c\/li\u003e\n\u003cli\u003eDust caps provide a physical barrier against grit, road debris and moisture, protecting the fork stanchions and extending the service life of the oil seals themselves.\u003c\/li\u003e\n\u003cli\u003ePrevents fork oil weeping that can contaminate the front brake and compromise handling — a straightforward service item with genuine safety implications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Regular Fork Seal Replacement Matters\u003c\/h2\u003e\u003cp\u003eWorn fork seals are one of the most common causes of degraded front-end feel on high-performance machines. Oil seeping past a damaged seal not only reduces damping precision — it can coat the brake disc and pad with oil, creating a serious hazard. Replacing the seals and dust caps as a paired set at the recommended service interval restores the fork's original damping characteristics and gives you confidence in the front end whether you are commuting, touring or pushing on at track days.\u003c\/p\u003e\u003cp\u003eK-Tech has built its reputation on precision suspension components and servicing products used by World Superbike and British Superbike teams. The FSK-026 brings that same engineering standard to a straightforward maintenance kit that every S1000RR owner will need sooner or later.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the BMW S1000RR K67, covering all variants produced from 2019 to 2026. Always confirm your frame designation before ordering to ensure correct fitment.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation requires specialist tools and technical knowledge. K-Tech recommends that this kit is fitted by an authorised K-Tech Service Centre to ensure correct seating of the seals, maximum performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-026\u003c\/li\u003e\n\u003cli\u003eInner diameter: 45.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 58.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eContents: 2x oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168817013002,"sku":"FSK-026","price":59.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVICEKITBMW.png?v=1780816407"},{"product_id":"k-tech-simmerring-oil-seals-kit-bmw-k67","title":"K-Tech Fork Oil Seals Kit BMW S1000RR K67 (2019-2026) FSS-026","description":"\u003cp\u003eManufactured by NOK in collaboration with Marzocchi, the K-Tech FSS-026 fork oil seal kit delivers the exacting material quality and dimensional precision that the BMW S1000RR K67's suspension demands. Every seal in this kit is produced to the same specification chosen by leading Japanese suspension manufacturers, making it a genuine like-for-like replacement rather than a generic aftermarket approximation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals produced in collaboration with Marzocchi — the benchmark choice for premium suspension systems worldwide\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement designed specifically for the BMW S1000RR K67 (2019–2026), ensuring a perfect fit with no modification required\u003c\/li\u003e\n\u003cli\u003ePrecise dimensions (45.00 mm inner diameter, 58.00 mm outer diameter, 11.00 mm height) eliminate the risk of improper sealing or premature wear\u003c\/li\u003e\n\u003cli\u003ePrevents fork oil loss and guards the fork internals against ingress of dirt and contamination\u003c\/li\u003e\n\u003cli\u003eKit contains two seals — everything needed to service both fork legs in a single purchase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eWhere budget seal kits cut corners on compound quality and dimensional tolerance, the K-Tech FSS-026 is built around NOK's high-performance elastomer formulation. NOK supply seals to OEM suspension programmes across the industry precisely because their materials resist heat cycling, oil degradation and UV exposure far longer than generic alternatives. The co-development with Marzocchi means the seal geometry is optimised for the lip-contact pressure and surface finish of the S1000RR K67's fork tubes, maintaining an effective barrier throughout the service interval rather than just at installation.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eA leaking or contaminated fork seal compromises damping consistency, taints brake components and, left unchecked, damages the fork tube surface itself. Fitting the FSS-026 kit restores the precise hydraulic environment the S1000RR K67's fork is calibrated for — whether that means confidence-inspiring feedback on fast B-roads or repeatable damping performance lap after lap on circuit. Keeping OEM-specification seals in place is one of the most cost-effective ways to protect a significant suspension investment.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eThis kit is engineered specifically for the BMW S1000RR K67 (2019–2026) and is not interchangeable with other model-year variants. Installation requires specialist tools and suspension knowledge; K-Tech recommend fitting by an authorised K-Tech Service Centre to ensure correct assembly and to maintain warranty coverage.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR — model code K67, model years 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFSS-026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal manufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK (in collaboration with Marzocchi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e45.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e58.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2x oil seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168817045770,"sku":"FSS-026","price":29.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1199SIMM.png?v=1780816408"},{"product_id":"k-tech-staubkappen-dust-seals-kit-bmw-k67","title":"K-Tech Dust Seals Kit for BMW S1000RR K67 (2019-2026) – DSS-026","description":"\u003cp\u003eEvery ride puts your forks under pressure, and it is the dust seals that stand between your fork legs and the grit, road film and fine debris that degrade suspension feel over time. The K-Tech DSS-026 Dust Seals Kit fits the BMW S1000RR K67 (2019-2026) with an exact OEM-spec profile, letting you maintain smooth, consistent fork action ride after ride without worrying about contamination working its way past the wiper lip.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured by NOK, a globally recognised specialist in fork sealing components, ensuring long-term durability and dimensional precision.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement profile — inner diameter of 45.00 mm mates perfectly with the K67 fork tube for a secure, rattle-free fit.\u003c\/li\u003e\n\u003cli\u003eDual outer-diameter geometry (58.30 mm and 62.30 mm) mirrors the stepped housing of the S1000RR K67 fork leg, eliminating the need for any modification or adapter.\u003c\/li\u003e\n\u003cli\u003ePrecision wiper lip keeps dust, mud and road debris out of the fork oil, preserving suspension sensitivity and extending fork seal service life.\u003c\/li\u003e\n\u003cli\u003eKit contains two dust seals — one per fork leg — so both sides are refreshed in a single service session.\u003c\/li\u003e\n\u003cli\u003eCompatible with both road and track use, making the DSS-026 suitable for riders who commute on weekdays and circuit-ride at weekends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Comfort Through Consistent Fork Performance\u003c\/h2\u003e\u003cp\u003eWorn or contaminated dust seals allow fine particles to migrate past the main oil seal, causing the fork to feel stiff, notchy or unpredictable — sensations that accumulate subtly over hundreds of kilometres until the suspension no longer tracks the road as it should. By fitting fresh K-Tech DSS-026 seals, you restore the precise, supple fork action that makes the S1000RR K67 such a rewarding machine to ride on a long motorway run or a technical B-road. The NOK compound maintains its flexibility across a wide temperature range, so the fork wipes cleanly whether you are setting off on a cold morning or returning from a hot trackday session.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eNOK is one of the world's leading manufacturers of precision sealing solutions, supplying OEM and aftermarket components to suspension manufacturers across the industry. The DSS-026 is produced to the same dimensional and material standards that K-Tech specifies for its own suspension builds, which means the seal profile, lip geometry and compound hardness are all matched to the K67 fork's operating tolerances rather than being a generic fit. The result is a seal that sits flush, wipes efficiently and does not roll or distort during installation or use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR – chassis code K67 – model years 2019, 2020, 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your chassis code before ordering. Installation requires specialist fork tools and correct torque procedures; K-Tech recommends fitting be carried out by an authorised K-Tech service centre to ensure performance and safety are maintained.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eDSS-026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e45.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter 1\u003c\/td\u003e\n\u003ctd\u003e58.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter 2\u003c\/td\u003e\n\u003ctd\u003e62.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 1\u003c\/td\u003e\n\u003ctd\u003e4.60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 2\u003c\/td\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity in Kit\u003c\/td\u003e\n\u003ctd\u003e2 dust seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168817996042,"sku":"DSS-026","price":26.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_faa6f0cd-295c-4b25-bb06-5b87c94f06a5.png?v=1780816413"},{"product_id":"k-tech-staubkappen-dust-seals-kit-bmw-k66","title":"K-Tech Dust Seals Kit for BMW M1000RR K66 (2021-2026) – DSS-026","description":"\u003cp\u003eContaminants entering the fork legs are one of the most insidious causes of suspension degradation — and on a machine as precisely engineered as the BMW M1000RR K66, that is a risk worth eliminating properly. The K-Tech DSS-026 dust seal kit uses NOK-manufactured seals sized to an exact fit for the M1000RR K66 from 2021 to 2026, blocking dirt and grime before they ever reach the oil seals beneath.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured by NOK, one of the most trusted names in fork seal production for motorsport and premium road applications\u003c\/li\u003e\n\u003cli\u003eDirect OEM-replacement fit for the BMW M1000RR K66 (2021-2026) — no modification or adaptation required\u003c\/li\u003e\n\u003cli\u003ePrecision inner diameter of 45.00 mm with dual outer diameters (58.30 mm and 62.30 mm) for correct seating in the fork leg\u003c\/li\u003e\n\u003cli\u003eDual-height profile (4.60 mm and 14.00 mm) replicates the original geometry to maintain fork action and sealing integrity\u003c\/li\u003e\n\u003cli\u003ePrevents ingress of dust and road debris, prolonging the life of the oil seals and the fork internals\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair — both fork legs serviced in a single order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Suspension Protection\u003c\/h2\u003e\u003cp\u003eNOK is a globally respected manufacturer of sealing components for high-performance suspension, and K-Tech has specified their dust seals for this application precisely because the material compound holds its form under the thermal cycling and mechanical stress that track and road riding on the M1000RR demands. A degraded or missing dust seal allows abrasive particles to work against the fork stanchion and eventually compromise the oil seal below — leading to fork oil weeping and a measurable loss of damping consistency. Replacing these seals at regular service intervals is the simplest intervention to protect a far more expensive assembly.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eThese dust seals are designed specifically for the BMW M1000RR K66 (2021-2026) and should not be fitted to other models. Installation requires specialist tools and fork assembly knowledge. K-Tech recommends that fitting is carried out by an authorised K-Tech service centre to ensure performance and safety standards are fully maintained.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is confirmed to fit the following models:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR K66 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDSS-026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e45.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter (1)\u003c\/th\u003e\n\u003ctd\u003e58.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter (2)\u003c\/th\u003e\n\u003ctd\u003e62.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e4.60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 dust seals (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eBMW M1000RR K66 (2021-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818323722,"sku":"DSS-026","price":26.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_af9bf79a-f92b-4a47-9206-6454cc15426f.png?v=1780816430"},{"product_id":"k-tech-simmerring-oil-seals-kit-bmw-k66-fss-026","title":"K-Tech Fork Oil Seal Kit BMW M1000RR K66 (2021–2026) FSS-026","description":"\u003cp\u003eWhen lap times matter and every fork stroke must remain precise, seal integrity is non-negotiable. The K-Tech FSS-026 fork oil seal kit is engineered specifically for the BMW M1000RR K66, delivering race-ready reliability that keeps your suspension performing exactly as intended from the first corner to the final straight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOEM-replacement quality using NOK-manufactured oil seals — the same supplier trusted by leading Japanese suspension manufacturers for their durability and precision fitment\u003c\/li\u003e\n\u003cli\u003eExact 45.00 mm inner diameter and 58.00 mm outer diameter ensure a leak-free, perfect seal on BMW M1000RR K66 forks with no modification required\u003c\/li\u003e\n\u003cli\u003e11.00 mm seal height maintains correct fork fluid retention under the sustained heat and pressure of track use\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, covering both fork legs in a single purchase for straightforward, efficient maintenance\u003c\/li\u003e\n\u003cli\u003ePrevents oil weeping and contamination of the fork stanchions — critical for consistent damping response at race pace\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe M1000RR K66 is a machine that demands absolute consistency from its suspension. Even minor oil seal degradation compromises damping linearity, introduces unpredictable fork behaviour and accelerates wear on stanchions and bushings. The K-Tech FSS-026 kit addresses this directly: NOK seals are formulated to resist the thermal cycling and mechanical stress inherent in high-performance fork operation, maintaining a positive seal lap after lap. Whether you are preparing for a track day, a club race or a full competition season, fitting fresh seals with a kit built to this standard is foundational maintenance, not an afterthought.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension is a respected name in professional and club-level motorsport, and the components in this kit reflect that pedigree. The NOK seals chosen here are not generic aftermarket parts — NOK is the supplier of choice for original equipment suspension manufacturers across the industry, selected precisely because of their consistent dimensional accuracy and long service life. Each seal in this kit is a direct replacement that slots into the original position without adaptation, keeping your service procedure clean and straightforward.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the BMW M1000RR K66 covering model years 2021 to 2026. Always confirm your frame designation before fitting. Installation requires specialist tools and technical knowledge; K-Tech recommends fitment by an authorised K-Tech service centre.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSS-026\u003c\/li\u003e\n\u003cli\u003eBrand: K-Tech Suspension\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eInner diameter: 45.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 58.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 11.00 mm\u003c\/li\u003e\n\u003cli\u003eQuantity: 2x oil seals (one pair)\u003c\/li\u003e\n\u003cli\u003eFitment: BMW M1000RR K66 (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818422026,"sku":"FSS-026","price":29.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1199SIMM_7c3d011f-e142-4900-8aa8-f4c2623968e8.png?v=1780816431"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-bmw-k66","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit BMW M1000RR K66 (2021–2026) FSK-026","description":"\u003cp\u003eEngineered to OEM-exceeding standards, the K-Tech fork oil seal and dust cap kit for the BMW M1000RR K66 brings together NOK-manufactured seals — the global benchmark in suspension sealing technology — with precision-matched dust caps to deliver a complete, confidence-inspiring rebuild in a single kit. When the front end of a 210-horsepower superbike demands absolute reliability, the quality of the seal matters as much as the spring rate.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-produced oil seals: NOK is the world-leading manufacturer of suspension seals, trusted by OEM and aftermarket performance teams alike for consistent quality and longevity.\u003c\/li\u003e\n\u003cli\u003eComplete two-piece sealing system: two oil seals and two dust caps address both oil retention and contamination ingress in a single purchase.\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional fit: 45.00 mm inner diameter and 58.00 mm outer diameter matched exactly to the M1000RR K66 fork specification.\u003c\/li\u003e\n\u003cli\u003eProtection against oil loss: high-integrity lip design prevents fork oil seepage that degrades damping feel and contaminates brake components.\u003c\/li\u003e\n\u003cli\u003eContamination defence: dust caps form a robust barrier against road grit, water and fine debris that accelerates fork stanchion wear.\u003c\/li\u003e\n\u003cli\u003eSuspension performance preservation: replacing worn seals restores the fork's intended damping response and extends overall fork service life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eK-Tech specifies NOK seals throughout its suspension rebuild kits for good reason. NOK holds the largest global market share in precision sealing components and supplies suspension manufacturers across MotoGP, World Superbike and series production. The rubber compound resists degradation from fork oil chemistry across a wide operating temperature range, while the seal lip geometry is optimised for the surface finish tolerances of the M1000RR K66 stanchions. The dust caps complement the oil seals with an equally robust construction, locking out the particulate contamination that is the primary cause of premature oil seal failure on road and track use alike.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Application\u003c\/h2\u003e\u003cp\u003eWhether the M1000RR is used as a high-mileage road machine or a dedicated circuit tool, fork seals are a service item that rewards proactive replacement. Degraded seals allow fork oil to film the stanchion, reducing effective damping and — critically — risking front brake contamination. The FSK-026 kit makes a like-for-like, factory-specification service straightforward, returning the front suspension to the precise character BMW and K-Tech intend.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eCorrect installation requires specialist tooling and suspension knowledge. K-Tech recommends fitting this kit at an authorised K-Tech Service Centre to ensure optimum performance and safety. Incorrect fitting can compromise fork function and rider safety.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and dimensioned specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR K66 (2021, 2022, 2023, 2024, 2025, 2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFSK-026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e45.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e58.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Manufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e2x oil seals, 2x dust caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW M1000RR K66 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818487562,"sku":"FSK-026","price":59.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVICEKITBMW_4b0e3da9-6446-442e-8912-6f8e663a07c9.png?v=1780816441"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-899-fss-015","title":"K-Tech Fork Oil Seal Kit Ducati Panigale 899 (2013–2016) FSS-015","description":"\u003cp\u003eManufactured by NOK — the original equipment seal supplier trusted by the world's leading Japanese suspension manufacturers — the K-Tech Fork Oil Seal Kit FSS-015 brings factory-grade sealing precision to the Ducati Panigale 899. With dimensions engineered specifically for the 899's fork legs, this kit is the direct OE replacement that restores suspension integrity without compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals: the same heritage and quality standard used as original equipment by top-tier Japanese suspension brands, now packaged by K-Tech for direct Ducati fitment.\u003c\/li\u003e\n\u003cli\u003eExact OE dimensions (43.00 x 54.00 x 11.00 mm) guarantee a precise, leak-free fit with no modification or adaptation required.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair — everything needed to service both fork legs in a single kit.\u003c\/li\u003e\n\u003cli\u003ePrevents fork oil weepage and maintains consistent damping performance even under sustained track or road stress.\u003c\/li\u003e\n\u003cli\u003eDrop-in compatibility with all Ducati Panigale 899 models from 2013 to 2016 eliminates guesswork at the workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage, Design and Manufacture\u003c\/h2\u003e\u003cp\u003eNOK has built its reputation over decades as a precision seal manufacturer whose products are specified directly by suspension OEMs. The design philosophy behind every NOK seal prioritises dimensional accuracy, compound durability and long service life — qualities that translate directly into a fork that moves as it should, lap after lap or mile after mile. K-Tech has selected NOK as their seal partner because the standard aligns with their own commitment to suspension components that perform at the highest level. The result is a kit that looks, fits and functions exactly as Ducati intended.\u003c\/p\u003e\u003ch2\u003ePerformance and Reliability\u003c\/h2\u003e\u003cp\u003eA failing fork seal is rarely dramatic at first — a faint oil film on the lower leg, a slight inconsistency in rebound, a fork that no longer tracks with its earlier precision. Replacing worn seals with the FSS-015 kit restores the hydraulic environment the damping circuits were designed to operate within. The 43.00 mm inner diameter mates flush to the Panigale 899's fork tube, while the 54.00 mm outer diameter and 11.00 mm cross-section provide the seating depth and lip geometry needed to contain fork oil under the full range of suspension travel.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 — model years 2013, 2014, 2015 and 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation must be carried out by an authorised K-Tech Service Centre. Specialist tools and technical knowledge are required to ensure full performance and safety after fitting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFSS-015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal Manufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e54.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 oil seals (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 899 (2013–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818848010,"sku":"FSS-015","price":23.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_37b63196-4b27-444e-bf88-5c36fb41f0b3.png?v=1780816456"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-899","title":"K-Tech Dust Seals Kit for Ducati Panigale 899 (2013-2016) – DSS-013","description":"\u003cp\u003eYour Ducati Panigale 899 deserves forks that perform flawlessly every ride — and that starts with keeping contaminants out. The K-Tech Dust Seals Kit DSS-013 is manufactured by NOK, the seal supplier of choice for the world's leading suspension builders, and drops straight into your 899 (2013–2016) as a direct OEM replacement. Day after day, season after season, these seals maintain a consistent, comfortable fork action by stopping dust and grime before they ever reach the oil seals beneath.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM replacement designed specifically for the Ducati Panigale 899 (2013–2016) — no modifications required for a perfect, all-day fit.\u003c\/li\u003e\n\u003cli\u003eManufactured by NOK, the preferred supplier to major Japanese and European suspension manufacturers worldwide.\u003c\/li\u003e\n\u003cli\u003ePrecision dimensions (43.00 mm inner diameter) ensure an airtight seal against dust, road grime and trail debris at every corner.\u003c\/li\u003e\n\u003cli\u003eDual-profile design with two outer diameter measurements accommodates the factory fork tube geometry exactly.\u003c\/li\u003e\n\u003cli\u003eExtends fork oil seal and inner tube service life by preventing abrasive contaminants from migrating past the wiper lip.\u003c\/li\u003e\n\u003cli\u003eKit includes two dust seals — one complete set for both fork legs in a single order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eNOK has supplied precision seals to suspension manufacturers for decades, and their reputation rests on dimensional accuracy and long-term rubber compound integrity. The DSS-013 uses the same compound and geometry as seals fitted during original assembly, which means the wiper lip maintains consistent contact pressure across the full fork stroke without creating excess friction. The result is a fork that feels smooth and responsive whether you are threading through city traffic on a Monday morning or pushing hard on a weekend canyon run.\u003c\/p\u003e\u003ch2\u003eWhy Dust Seals Matter\u003c\/h2\u003e\u003cp\u003eA worn or cracked dust seal is one of the most common causes of premature fork oil seal failure. Once abrasive particles bypass the dust wiper they score the fork tube surface and accelerate wear on the inner oil seal, leading to oil weeping and a loss of damping precision. Replacing dust seals on a routine service schedule — using quality NOK-manufactured parts — is one of the most cost-effective steps you can take to preserve the handling character that makes the Panigale 899 so satisfying to ride.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is engineered exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 — model years 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech service centre to ensure correct seating and to guarantee product performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eDSS-013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter 1\u003c\/td\u003e\n\u003ctd\u003e54.20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter 2\u003c\/td\u003e\n\u003ctd\u003e59.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 1\u003c\/td\u003e\n\u003ctd\u003e6.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 2\u003c\/td\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 dust seals (one per fork leg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818880778,"sku":"DSS-013","price":25.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_e43a8561-2e5b-4e8a-99a3-93ec5b7c478e.png?v=1780816456"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-899","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit – Ducati Panigale 899 (2013–2016) FSK-015","description":"\u003cp\u003eKeeping your forks smooth and leak-free over long days in the saddle starts with the right seals. The K-Tech Fork Oil Seal and Dust Cap Kit for the Ducati Panigale 899 (2013–2016) uses NOK-manufactured seals — the same supplier trusted as original equipment by leading Japanese suspension manufacturers — to deliver all-day confidence in your front end, whether you are threading through morning commuter traffic or pushing hard across an open road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals chosen for exceptional durability and consistent sealing performance under real-world riding conditions\u003c\/li\u003e\n\u003cli\u003ePrecise 43.00 mm inner diameter and 54.00 mm outer diameter engineered for a perfect press fit in the Panigale 899 fork legs\u003c\/li\u003e\n\u003cli\u003eOil seals create a reliable barrier against fork oil loss, preserving damping consistency and suspension feel ride after ride\u003c\/li\u003e\n\u003cli\u003eDust caps actively exclude road grit, moisture and fine debris that accelerate seal wear and degrade fork action\u003c\/li\u003e\n\u003cli\u003eComplete two-seal, two-cap kit covers both fork legs in a single purchase — no hunting for individual components\u003c\/li\u003e\n\u003cli\u003ePart number FSK-015 ensures you are ordering the correct K-Tech service kit first time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Performance\u003c\/h2\u003e\u003cp\u003eNOK is the benchmark name in sealing technology, and its reputation rests on decades of supplying suspension manufacturers who demand zero tolerance for failure. The compound used in these seals resists fork oil degradation and maintains its elasticity across the temperature range a Panigale 899 encounters in normal sport riding. The dust caps match the same dimensional accuracy, sitting flush against the fork slider to deny ingress at the wiper lip — the first point of attack for fine abrasive particles that shorten seal life.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Use\u003c\/h2\u003e\u003cp\u003eThe Panigale 899 fork is sensitive enough that any weeping seal is immediately felt as vague, inconsistent damping — the kind of subtle degradation that erodes rider confidence well before it becomes a visible oil stain on the slider. Renewing both seals and dust caps at the same service interval restores the factory-spec hydraulic environment and gives the fork a consistent, predictable feel across every corner. Installation requires specialist tooling and suspension knowledge; K-Tech recommends fitting at an authorised K-Tech Service Centre to ensure optimum chassis performance and safety.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and confirmed to fit the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 (2013, 2014, 2015, 2016)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-015\u003c\/li\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 54.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eKit contents: 2x oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 899 (2013–2016)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168818913546,"sku":"FSK-015","price":44.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_452ea069-ba92-4353-b706-8bbe4bb26f4a.png?v=1780816457"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-899-13-16-gbs-019","title":"K-Tech Fork Slide Bushing Kit for Ducati Panigale 899 (2013–2016) GBS-019","description":"\u003cp\u003eLong days in the saddle demand a front fork that moves with you, not against you. The K-Tech GBS-019 slide bushing kit replaces the factory fork guide bushings on the Ducati Panigale 899 with precision-engineered components that deliver smooth, consistent travel from the first corner to the last — whether you are threading through a mountain pass or logging laps at the track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper coating for outstanding resistance to corrosion and progressive wear, keeping the fork acting like new deep into the service interval.\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces reduce friction to a minimum, so the fork glides through its travel without stiction — giving the rider confident, precise feedback through the bars at all times.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement: machined to exact original dimensions for a fit that needs no modification and restores factory feel immediately on fitment.\u003c\/li\u003e\n\u003cli\u003eComplete two-bushing set covers both fork legs in a single purchase, leaving nothing unfinished.\u003c\/li\u003e\n\u003cli\u003eTight dimensional tolerances — 43.00 mm inner diameter, 47.00 mm outer diameter, 15.00 mm height, 2.00 mm wall thickness — ensure accurate centring and zero play.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension is respected in MotoGP and World Superbike paddocks for engineering that prioritises real-world feel over headline figures. The GBS-019 reflects that philosophy: the copper interlayer bonds metallurgically to the hardened steel body, preventing galvanic creep and micro-pitting even under the high side-loads the Panigale 899 generates through aggressive cornering. The PTFE surface layer handles the business end of every compression and rebound stroke, virtually eliminating the stick-slip behaviour that makes worn bushings so noticeable as fatigue sets in on a long ride. The result is a fork that responds proportionally, soaks up surface imperfections without drama, and lets the rider concentrate on riding rather than managing chassis vagueness.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the Ducati Panigale 899, model years 2013 to 2016. It replaces the original front fork guide bushings without modification. Installation requires specialist tools and correct torque procedures; K-Tech recommends fitment by an authorised K-Tech service centre to ensure optimal performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 47.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15.00 mm\u003c\/li\u003e\n\u003cli\u003eWall thickness: 2.00 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: hardened steel with copper coating and PTFE-coated contact surfaces\u003c\/li\u003e\n\u003cli\u003ePart number: GBS-019\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 bushings (complete set for both fork legs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819142922,"sku":"GBS-019","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_879143ec-797e-4938-857d-c01adcaa3435.png?v=1780816464"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-899","title":"K-Tech Fork Slide Bushing Kit for Ducati Panigale 899 (2013–2016) – SBS-022","description":"\u003cp\u003ePrecision-engineered to restore the Ducati Panigale 899's front fork action to its full potential, the K-Tech SBS-022 slide bushing kit replaces factory bushings with components built to a measurably higher standard. Hardened steel construction with copper coating and PTFE-treated contact surfaces means every millimetre of fork travel is guided with minimal friction and maximum longevity — critical on a machine that demands total suspension fidelity at both road and track pace.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel core with copper anti-corrosion coating for extended service life in all conditions\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces reduce friction to a minimum, delivering smooth and consistent fork response\u003c\/li\u003e\n\u003cli\u003ePrecision-dimensioned as a direct OEM replacement — no modification or adaptation required\u003c\/li\u003e\n\u003cli\u003eComplete set of two bushings supplied, covering a full fork service in a single purchase\u003c\/li\u003e\n\u003cli\u003eK-Tech part number SBS-022, manufactured specifically for the Panigale 899 fork assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Performance\u003c\/h2\u003e\u003cp\u003eThe fork slide bushing is one of the most safety-critical wear items in a motorcycle's front suspension. Worn or inferior bushings allow lateral play in the fork legs, introducing vagueness into steering feel, degrading braking stability and, in severe cases, causing fork binding or uneven damping response. K-Tech's SBS-022 addresses this directly: the hardened steel body provides structural rigidity under the extreme loading generated during hard braking and cornering, while the copper coating protects against the corrosion that accelerates wear on steel-to-steel contact surfaces. The PTFE layer on the bearing face keeps kinetic friction consistently low throughout the fork's range of motion, preserving the precise, predictable steering the Panigale 899 chassis was designed to deliver.\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cp\u003eFitting fork slide bushings requires disassembly of the front fork legs and the use of specialist workshop tooling. K-Tech recommends installation be carried out by an authorised K-Tech service centre or a qualified suspension technician to ensure correct seating, torque settings and post-installation setup. Attempting installation without the proper tools risks damage to the bushing, fork tube or oil seal.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe SBS-022 is manufactured exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 — model years 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis kit is not compatible with any other Ducati model or year range. Always verify your specific model year before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e41.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e44.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e20.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel with copper coating, PTFE-coated bearing face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSBS-022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity in kit\u003c\/td\u003e\n\u003ctd\u003e2 bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819175690,"sku":"SBS-022","price":19.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT2_c0aba7e7-3da6-476f-8e5e-0a6bc2d3f5ef.png?v=1780816472"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-959","title":"K-Tech Dust Seals Kit for Ducati Panigale 959 (2016–2019) – DSS-013","description":"\u003cp\u003ePrecision-engineered by NOK — the supplier of choice for the world's most respected suspension manufacturers — this K-Tech dust seals kit brings OEM-grade fork protection to the Ducati Panigale 959. Crafted to the exacting tolerances that SHOWA and other leading Japanese suspension brands specify as standard fitment, the DSS-013 represents the kind of uncompromising quality that defines K-Tech's suspension heritage.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement manufactured by NOK, the preferred seal supplier for premium suspension brands worldwide\u003c\/li\u003e\n\u003cli\u003eLocks out dust, road grime and contaminants before they reach the fork internals, extending the service life of the whole suspension assembly\u003c\/li\u003e\n\u003cli\u003eSHOWA-specification seal compound delivers outstanding resilience across a wide temperature range — equally at home on track days and road riding\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional tolerances (43.00 mm inner diameter) ensure a confident press fit with no leakage pathway\u003c\/li\u003e\n\u003cli\u003eKit supplies both fork legs in a single purchase — no need to source seals separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Heritage\u003c\/h2\u003e\u003cp\u003eNOK has been manufacturing precision sealing solutions for the global motorsport and automotive industries for decades. Their rubber compounds and dimensional consistency are trusted by original equipment manufacturers precisely because the seals perform reliably from the first ride and maintain that performance over thousands of kilometres. Fitting the DSS-013 means your Panigale 959's forks are protected by the same calibre of seal found on factory-fresh machines.\u003c\/p\u003e\u003cp\u003eK-Tech Suspension has built its reputation on supplying components that meet or exceed OEM standards for discerning riders who refuse to compromise on chassis performance. The DSS-013 dust seal kit is a straightforward, high-confidence maintenance item that reflects that philosophy: correct materials, correct dimensions, correct fitment — nothing more, nothing less.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eContamination is the primary cause of premature fork seal failure and inconsistent damping. Once grit bypasses a worn dust seal it abrades the oil seal lip and scores the stanchion surface, leading to oil weeping and a noticeably degraded ride quality. Replacing ageing dust seals with NOK-manufactured items as part of a routine fork service restores the crisp, precise front-end feel the Panigale 959 was designed to deliver — whether you are threading through mountain passes or chasing lap times.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Tech DSS-013 dust seals kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018 and 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech Service Centre to ensure correct seating and to guarantee the performance and safety of the product.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eDSS-013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter (1)\u003c\/td\u003e\n\u003ctd\u003e54.20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter (2)\u003c\/td\u003e\n\u003ctd\u003e59.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (1)\u003c\/td\u003e\n\u003ctd\u003e6.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (2)\u003c\/td\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity Supplied\u003c\/td\u003e\n\u003ctd\u003e2 dust seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819470602,"sku":"DSS-013","price":25.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_066e9bc6-c99c-4e01-aa7d-e7ef0d896546.png?v=1780816483"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-959","title":"K-Tech Fork Oil Seal Kit Ducati Panigale 959 (2016-2019) FSS-015","description":"\u003cp\u003eMaintaining precise fork action is non-negotiable at the limit, and the K-Tech FSS-015 fork oil seal kit gives your Ducati Panigale 959 exactly that. Manufactured by NOK — the OEM seal supplier of choice for leading Japanese suspension manufacturers — these oil seals deliver the sealing integrity and service life that serious track riders demand, keeping fork oil exactly where it belongs and your suspension geometry consistent lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals: the same supplier trusted by top-tier OEM suspension brands for uncompromising quality and longevity.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement: engineered to the exact dimensions of the Ducati Panigale 959 fork tubes — zero modification required.\u003c\/li\u003e\n\u003cli\u003eComplete kit: supplied as a pair (2x seals), covering both fork legs in a single service.\u003c\/li\u003e\n\u003cli\u003eLeak-free performance: prevents oil migration that causes inconsistent damping, fade, and contaminated brake rotors on track.\u003c\/li\u003e\n\u003cli\u003eDrop-in fitment: precise dimensional tolerances mean straightforward installation by a qualified technician with the correct tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Fork Maintenance\u003c\/h2\u003e\u003cp\u003eOn track, fork seals are a consumable that too many riders neglect until they see oil streaking down the slider. The K-Tech FSS-015 kit is designed for proactive maintenance — replace the seals as part of a scheduled fork service and you eliminate a common cause of variable front-end feel. Consistent damping response from corner entry through to the apex is the result, which translates directly into confidence and faster lap times on the Panigale 959.\u003c\/p\u003e\u003ch3\u003eNOK Quality\u003c\/h3\u003e\u003cp\u003eNOK is the benchmark for precision oil seals in the motorsport and performance motorcycle sector. Their seals are produced to tight dimensional and material tolerances, resisting the heat cycles, fork oil chemistry, and mechanical stress that come with sustained track use. Fitting NOK seals via the K-Tech kit means you are restoring your forks to the performance standard Ducati intended, not accepting a compromise.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation requires specialist tools and technical knowledge. Fitting should be carried out exclusively by an authorised K-Tech Service Centre to ensure full performance and safety. The seals are intended solely for the Ducati Panigale 959 (2016–2019) as specified.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 (2016, 2017, 2018, 2019)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFSS-015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e54.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 oil seals (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819667210,"sku":"FSS-015","price":23.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_f90de3a8-d4f9-487d-93af-8784647246ad.png?v=1780816488"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-panigale-959","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit for Ducati Panigale 959 (2016–2019) FSK-015","description":"\u003cp\u003eEngineered to maintain the precise suspension performance your Ducati Panigale 959 demands, the K-Tech FSK-015 fork oil seal and dust cap kit delivers OEM-grade sealing integrity backed by NOK manufacture — the global benchmark in sealing components and the original equipment choice of every major Japanese suspension manufacturer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSeals produced by NOK, the world-leading OEM seal manufacturer trusted by all major Japanese suspension OEMs — outstanding reliability and service life.\u003c\/li\u003e\n\u003cli\u003eOil seals provide a positive, leak-free barrier against fork oil loss, maintaining correct damping characteristics and rider safety.\u003c\/li\u003e\n\u003cli\u003eDust caps shield the fork internals from contamination by dirt, grit, and moisture — critical for preserving seal life and suspension precision.\u003c\/li\u003e\n\u003cli\u003ePrecise 43.00 mm inner diameter and 54.00 mm outer diameter dimensions ensure a correct, interference-fit installation.\u003c\/li\u003e\n\u003cli\u003eComplete two-piece kit covers both fork legs in a single purchase — no part-ordering required.\u003c\/li\u003e\n\u003cli\u003eK-Tech recommends installation by an authorised K-Tech Service Centre using specialist tooling to ensure correct fitment and sustained performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Seal Quality Matters\u003c\/h2\u003e\u003cp\u003eA compromised fork seal does far more than leave an oily smear on the fork leg. Oil loss directly reduces damping force, causing unpredictable handling, extended braking distances, and increased wear on the fork internals. Fitting NOK-manufactured seals — the same supplier specified by the suspension industry's most demanding OEM programmes — means the safety-critical interface between your fork oil and the outside world is held to the highest possible standard. The accompanying dust caps extend that protection further, blocking the fine abrasive particles that accelerate seal wear and score the fork surface over time.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 54.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eKit contents: 2x fork oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003ePart number: FSK-015\u003c\/li\u003e\n\u003cli\u003eBrand: K-Tech\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819699978,"sku":"FSK-015","price":44.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_4c757e75-9811-46f7-871b-8055b23127d6.png?v=1780816490"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-959-gbs-019","title":"K-Tech Fork Slide Bush Kit – Ducati Panigale 959 (2016–2019) GBS-019","description":"\u003cp\u003ePrecision front fork performance is the foundation of every fast lap, and the K-Tech Slide Bush Kit GBS-019 is engineered to deliver exactly that for the Ducati Panigale 959. Developed specifically for the 2016–2019 model years, these hardened-steel guide bushes with PTFE-coated contact surfaces eliminate the friction and stick-slip behaviour that blunts corner-entry feedback and upsets suspension consistency under hard braking.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper coating for corrosion resistance and extended service life, even under the thermal and load demands of track use\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces minimise sliding friction, delivering smoother, more linear fork action and sharper front-end response on turn-in\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement geometry — inner diameter 43.00 mm, outer diameter 47.00 mm, height 15.00 mm, wall thickness 2.00 mm — no modification required\u003c\/li\u003e\n\u003cli\u003eComplete two-bush set for a full fork service in a single purchase\u003c\/li\u003e\n\u003cli\u003eExact fitment for Ducati Panigale 959 (2016–2019), part number GBS-019\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track and Road\u003c\/h2\u003e\u003cp\u003eOn circuit, consistent fork action translates directly into the confidence to brake later and carry more corner speed. The PTFE coating on these K-Tech bushes keeps stiction to a minimum throughout the fork stroke, so the suspension tracks surface irregularities and kerbs faithfully rather than hanging momentarily and then releasing. The result is a fork that communicates grip level accurately, lap after lap.\u003c\/p\u003e\u003cp\u003eOn the road the same low-friction characteristic smooths out the micro-movements that cause vagueness over broken surfaces, giving the Panigale 959 a more planted, communicative feel regardless of pace.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eK-Tech manufactures these slide bushes from hardened steel, then applies a copper base coat that acts as both a corrosion barrier and a bonding layer for the PTFE surface treatment. The combination produces a bush that resists wear at the high contact pressures generated during aggressive braking and rapid direction changes, maintaining dimensional accuracy over a full season of use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is a precise fit for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation requires fork-specific tooling and working knowledge of inverted fork service procedures. K-Tech recommends fitment by an authorised K-Tech Service Centre to ensure correct seating and optimal suspension performance.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eGBS-019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e47.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel with copper coating and PTFE-coated contact surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 slide bushes per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819929354,"sku":"GBS-019","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_e875b4cf-7e0b-4180-9edd-0f212be1b874.png?v=1780816503"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-959-sbs-022","title":"K-Tech Fork Slide Bush Kit Ducati Panigale 959 (2016–2019) SBS-022","description":"\u003cp\u003eEngineered for the demands of track and racing use, the K-Tech SBS-022 fork slide bush kit delivers the precise, low-friction front fork response that the Ducati Panigale 959 needs when pushing hard into late braking zones. This is a direct OEM replacement built to a specification that goes beyond standard, using hardened steel construction with a copper underlay and a PTFE-coated contact surface to eliminate the stick-slip behaviour that undermines confidence at the limit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePTFE-coated contact surfaces drastically reduce friction for sharper, more consistent fork action under race-day conditions\u003c\/li\u003e\n\u003cli\u003eHardened steel core with copper coating provides superior wear resistance over the standard bushes\u003c\/li\u003e\n\u003cli\u003ePrecision-manufactured to exact dimensional tolerances — inner diameter 41.70 mm, outer diameter 44.70 mm, height 20.00 mm, wall thickness 1.50 mm\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement — no modification required, installs in the existing fork lowers\u003c\/li\u003e\n\u003cli\u003eKit includes both fork slide bushes for a complete renewal in a single service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eK-Tech is a name synonymous with serious suspension engineering, trusted by professional teams and privateer racers alike. The SBS-022 kit was developed with the Panigale 959 platform specifically in mind, addressing the wear and friction characteristics identified in sustained track use. The PTFE layer keeps stiction to a minimum across a wide temperature range, so the fork tracks the road or circuit surface accurately whether you are working through the kerbs at a trackday or running full-race pace. The copper interlayer acts as both a bonding surface and an additional wear buffer, extending service intervals considerably compared with uncoated alternatives.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eEvery dimension of the SBS-022 bush is held to tight tolerances to ensure there is no unwanted play in the fork assembly. Sloppy bushes introduce vagueness into steering feel and accelerate seal wear — the K-Tech units eliminate both concerns. The result is a fork that moves with the suppleness of a freshly serviced unit well into its service life, maintaining the feedback loop between tyre and rider that the Panigale 959 chassis is designed to deliver.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech service centre to ensure correct function and maximum safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eSBS-022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e41.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e44.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e20.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003e1.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel with copper coating and PTFE-coated contact surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003e2x fork slide bushes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168819962122,"sku":"SBS-022","price":19.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT2_715ccc32-b611-4718-a79d-898e93eaea72.png?v=1780816504"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-1199-s-r-12-17-dss-017","title":"K-Tech Dust Seals Kit for Ducati Panigale 1199 S\/R (2012–2017) – DSS-017","description":"\u003cp\u003eKeeping your Ducati Panigale 1199 S\/R on the road in peak condition starts with protecting what you cannot see. The K-Tech DSS-017 dust seals kit uses NOK-manufactured dust seals to guard the front fork stanchions against dirt, grit and moisture — preserving fork action and extending service intervals on your 1199 S or R (2012–2017).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-quality dust seals deliver proven durability and consistent sealing performance across daily riding and track use alike.\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional fit — 43.00 mm inner diameter, 55.50 mm outer diameter — ensures the seals seat correctly without modification.\u003c\/li\u003e\n\u003cli\u003eEffective contamination barrier stops dust and debris from migrating past the fork seals, reducing premature wear on stanchions and oil seals.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, covering both fork legs in a single purchase for a straightforward service.\u003c\/li\u003e\n\u003cli\u003eDirect OE-replacement profile makes fitment straightforward for any competent workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Value\u003c\/h2\u003e\u003cp\u003eNOK is one of the most respected names in fork seal manufacture, and the DSS-017 reflects that reputation. The rubber compound resists the temperature cycling and road contamination that a Panigale encounters on a typical commute or weekend blast, maintaining a clean wiper edge far longer than budget alternatives. For owners who want to keep their 1199 in factory condition without continually budgeting for fork rebuilds, this kit represents straightforward, cost-effective preventive maintenance.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the Ducati Panigale 1199 S and 1199 R models produced between 2012 and 2017. It is not suitable for the standard Panigale 1199 base model. If you are unsure which variant you have, check the VIN plate or service documentation before ordering.\u003c\/p\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech service centre or qualified workshop to ensure correct seating and to maintain the safety and performance of the fork assembly.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 55.50 mm\u003c\/li\u003e\n\u003cli\u003eHeight 1: 4.70 mm\u003c\/li\u003e\n\u003cli\u003eHeight 2: 14.00 mm\u003c\/li\u003e\n\u003cli\u003eSupplied quantity: 2x dust seals (one pair)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168820584714,"sku":"DSS-017","price":25.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS2NEW_326e12c9-ca8f-4927-89a7-74bf6abc706c.png?v=1780816527"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-1199","title":"K-Tech Dust Seals Kit for Ducati Panigale 1199 (2012–2014) – DSS-038","description":"\u003cp\u003eKeep your Ducati Panigale 1199's forks working as they should, mile after mile. The K-Tech Dust Seals Kit DSS-038 uses NOK-quality sealing material and a precision fit engineered specifically for the 2012–2014 Panigale 1199, locking out road grime, moisture and fine dust before they ever reach the fork internals — so every ride feels as composed as the first.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM-equivalent fitment for the Ducati Panigale 1199 (2012–2014) — no modification required\u003c\/li\u003e\n\u003cli\u003eManufactured from robust NOK material, renowned for durability and long service life in demanding fork applications\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional tolerances (50.00 mm inner diameter, 63.40 mm outer diameter) ensure a consistent, gap-free seal\u003c\/li\u003e\n\u003cli\u003eActively blocks dust, mud and moisture ingress, protecting the fork oil seals and stanchions against premature wear\u003c\/li\u003e\n\u003cli\u003eKit includes two dust seals — a complete replacement for both fork legs in a single order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFork Protection That Goes the Distance\u003c\/h2\u003e\u003cp\u003eThe front fork of the Panigale 1199 is central to both its track capability and its everyday ride quality. Once dust seals begin to degrade, abrasive particles migrate past the wiper lip and accelerate wear on the oil seals beneath, leading to fork oil weeping, inconsistent damping and costly rebuilds. The K-Tech DSS-038 kit addresses this at the source: a tight-fitting dust seal with a 4.60 mm primary seal height and a 14.00 mm overall height works in tandem to strip contamination from the stanchion on every compression stroke, keeping the inner workings clean and the action smooth.\u003c\/p\u003e\u003ch3\u003eAll-Day Comfort Through Consistent Fork Performance\u003c\/h3\u003e\u003cp\u003eWhether you are threading through commuter traffic or pushing hard on a favourite B-road, fork consistency is what translates into rider comfort. Degraded or incorrectly sized dust seals allow micro-contamination to build up gradually, introducing stiction and unpredictable damping that erodes confidence — and comfort — over time. Fitting a correctly dimensioned, high-grade replacement kit like the DSS-038 restores that precise, linear fork response and keeps it there, reducing the fatigue that comes from fighting a front end that no longer feels planted.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and supplied exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1199 — model years 2012, 2013, 2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation requires specialist tools and techniques. Fitting should be carried out by an authorised K-Tech Service Centre or a qualified suspension technician to ensure correct seating and to maintain product performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eDSS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Material\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e63.40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (1)\u003c\/td\u003e\n\u003ctd\u003e4.60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (2)\u003c\/td\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 dust seals (one per fork leg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1199 (2012–2014)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168820650250,"sku":"DSS-038","price":29.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_d8dd09d2-765d-4b89-9624-427d99c4e6b3.png?v=1780816531"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-1199-fss-038","title":"K-Tech Fork Oil Seal Kit Ducati Panigale 1199 (2012–2014) FSS-038","description":"\u003cp\u003eKeeping your Ducati Panigale 1199's Marzocchi forks in top condition need not be complicated or expensive. The K-Tech FSS-038 oil seal kit supplies two NOK-manufactured fork oil seals machined to the exact dimensions of the original components — an honest, cost-effective way to restore leak-free fork performance and maintain the precise handling the Panigale 1199 is known for.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured by NOK, the supplier of choice for leading Japanese suspension OEMs, guaranteeing consistent material quality and dimensional accuracy on every seal.\u003c\/li\u003e\n\u003cli\u003eDirect OEM-equivalent replacement for the Ducati Panigale 1199 Marzocchi fork assembly — no machining, shimming or modification required.\u003c\/li\u003e\n\u003cli\u003ePrecision dimensions of 50.00 mm inner diameter, 63.00 mm outer diameter and 11.00 mm height ensure a perfect housing fit and a secure, oil-tight contact face.\u003c\/li\u003e\n\u003cli\u003eKit contains two seals, covering both fork legs in a single purchase — everything needed for a complete fork service in one box.\u003c\/li\u003e\n\u003cli\u003eSuperior rubber compound resists fork oil degradation and temperature cycling, extending service intervals and reducing the frequency of repeat maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eWhether you use your Panigale 1199 as a weekend canyon carver or take it to track days, a weeping fork seal is one of those small faults that quickly escalates. Oil contaminating the front brake rotor is a safety risk; oil coating the lower leg invites dirt ingestion and accelerates bushing wear. The FSS-038 kit addresses all of that with an off-the-shelf part that arrives ready to fit. Because the seals match the original specification precisely, any competent workshop — or an experienced home mechanic with the correct seal driver — can complete the job in a single session without sourcing additional adapters or shims.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eNOK is one of the world's most respected sealing technology companies and the reason K-Tech specifies their seals is straightforward: dimensional consistency across production batches. Each seal in the FSS-038 kit holds its 50.00 mm bore and 63.00 mm outside diameter to the tolerances the Marzocchi housing demands, so the seal lip loads correctly against the fork stanchion from the first stroke. The 11.00 mm height matches the original groove depth, preventing the seal from rocking or extruding under high-speed compression loads.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1199 — model years 2012, 2013 and 2014 (Marzocchi forks)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eVerify your fork inner tube diameter before fitting. Installation requires specialist fork seal drivers and appropriate suspension knowledge. K-Tech recommends fitting by an authorised K-Tech Service Centre to ensure full performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFSS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal Manufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e63.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity per Kit\u003c\/th\u003e\n\u003ctd\u003e2 oil seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1199 (2012–2014), Marzocchi forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168820715786,"sku":"FSS-038","price":35.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1199SIMM_88590bb5-c895-4dd9-99bb-d44edbf704e4.png?v=1780816535"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-panigale-1199","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit for Ducati Panigale 1199 (2012–2014) FSK-038","description":"\u003cp\u003eKeep your Panigale 1199's front forks sealed and road-ready with this K-Tech fork oil seal and dust cap kit. Designed specifically for the Ducati Panigale 1199 (2012–2014), the FSK-038 kit uses NOK-manufactured seals — a brand trusted as original equipment by major Japanese manufacturers — to deliver consistent, reliable protection without the premium price of a full suspension service.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-sourced oil seals provide a proven, long-lasting barrier against fork oil loss, keeping suspension action smooth and predictable.\u003c\/li\u003e\n\u003cli\u003eMatching dust caps shield inner fork tubes from road grime, moisture and abrasive particles that accelerate seal wear.\u003c\/li\u003e\n\u003cli\u003eExact-fit dimensions (55.00 mm inner diameter, 66.00 mm outer diameter) ensure a correct, leak-free installation on the Panigale 1199 fork legs.\u003c\/li\u003e\n\u003cli\u003eComplete two-seal, two-cap kit covers both fork legs in a single purchase — no need to source components separately.\u003c\/li\u003e\n\u003cli\u003eNOK is a globally recognised suspension seal specialist, supplying OEM lines at major manufacturers worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality You Can Rely On\u003c\/h2\u003e\u003cp\u003eNOK has earned its reputation by manufacturing seals to exacting tolerances, using rubber compounds that resist the heat cycles and hydraulic pressures typical of a high-performance fork. Fitting a quality seal kit at the first sign of weeping oil is one of the most cost-effective maintenance steps you can take — far cheaper than allowing degraded seals to contaminate fork oil or damage the stanchion surface. The FSK-038 gives Panigale 1199 owners that reassurance without compromise.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Use\u003c\/h2\u003e\u003cp\u003eWhether the 1199 sees daily road miles or occasional track days, fork seals are a wear item that benefits from proactive replacement. Contaminated or leaking fork oil directly affects damping consistency, which in turn affects braking stability and corner entry feel. Installing fresh K-Tech seals restores the fork to its intended specification and keeps the suspension responding as Ducati intended.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1199 — model years 2012, 2013, 2014\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eCorrect fitting requires specialist tools and suspension knowledge. K-Tech recommends installation by an authorised K-Tech Service Centre to ensure optimum performance and safety of the suspension system.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-038\u003c\/li\u003e\n\u003cli\u003eInner diameter: 55.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 66.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eKit contents: 2x oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 (2012–2014)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168820814090,"sku":"FSK-038","price":68.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVICEKITBMW_ed3b8aef-ae0c-4237-9ab7-d0412f91be1e.png?v=1780816538"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-1199-s-r","title":"K-Tech Fork Oil Seal Kit Ducati Panigale 1199 S\/R (2012–2017) FSS-021","description":"\u003cp\u003eLeaking fork seals are one of the most common causes of degraded suspension feel on the Ducati Panigale 1199 — and the K-Tech FSS-021 oil seal kit is the most straightforward way to restore your forks to factory-fresh condition. Manufactured by NOK, the global benchmark supplier for OEM suspension seals on leading Japanese and European sport bikes, this pair of seals delivers a direct, no-compromise fit for the 1199 S and R models produced between 2012 and 2017.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals — the same supplier trusted as original equipment by top-tier suspension manufacturers worldwide, guaranteeing consistent quality across every unit.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement: dimensions of 43.00 x 55.10 x 11.00\/14.00 mm match the factory specification exactly, so there is no fitting adjustment required.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, covering a complete fork service in one purchase — no need to source individual seals separately.\u003c\/li\u003e\n\u003cli\u003ePrevents oil weeping and contamination of the fork leg outer surface, keeping brake discs and tyres free from lubricant residue.\u003c\/li\u003e\n\u003cli\u003eRestores consistent damping response and suspension feel that gradually diminishes as factory seals age and harden.\u003c\/li\u003e\n\u003cli\u003ePart number FSS-021 makes reordering straightforward for workshops and regular service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eReplacing fork oil seals is a routine part of any thorough suspension service, yet the quality of the seal itself has a measurable effect on how long you go between services and how reliably the fork performs in between. Cheap aftermarket alternatives can shrink, crack or extrude under load, leading to repeat work and wasted time. Because the FSS-021 uses NOK rubber compound, you get the same longevity you would expect from a fresh set of factory seals — making this kit the cost-effective choice for both one-off home servicing and high-volume workshop use.\u003c\/p\u003e\u003cp\u003eThe 43.00 mm inner diameter is specific to the Öhlins NIX30 and TTX36 units fitted to the Panigale 1199 S and R, and it is important to note that this kit is not suitable for the standard 1199 base model, which uses a different fork diameter. Always confirm your exact variant before ordering.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eFork seal replacement requires fork disassembly, a seal driver of the correct diameter, and a working knowledge of suspension service procedures. K-Tech recommends that installation is carried out by an authorised K-Tech Service Centre or a qualified suspension technician. Correct installation torque and fluid level must be observed to achieve full performance and safety.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 S — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eNot suitable for the Ducati Panigale 1199 base model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFSS-021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e55.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 1\u003c\/td\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight 2\u003c\/td\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 oil seals (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168820977930,"sku":"FSS-021","price":33.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_9264448f-b957-4b7c-a03f-d8fc5727c246.png?v=1780816541"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1199-12-14-gbs-038","title":"K-Tech Fork Slider Bushing Kit for Ducati Panigale 1199 (2012–2014) – GBS-038","description":"\u003cp\u003eOn track, where every millisecond of fork response determines corner entry confidence, the quality of your fork slider bushings is not a detail to overlook. The K-Tech GBS-038 slider bushing kit is precision-engineered specifically for the Ducati Panigale 1199 (2012–2014), delivering a direct OEM replacement with measurably lower friction and longer service life — exactly what a racing or track-day build demands.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper and PTFE coating for maximum wear resistance and corrosion protection\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces reduce friction to a minimum, improving fork response and feel at the front tyre\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement — engineered to the exact dimensions of the Ducati Panigale 1199 factory bushings\u003c\/li\u003e\n\u003cli\u003eComplete renewal kit: two bushings supplied for a full front fork service in a single purchase\u003c\/li\u003e\n\u003cli\u003ePrecision manufacture to K-Tech's exacting tolerances, the same standards used across their professional suspension programme\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance at the Track\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale 1199 is a machine built around razor-sharp handling, and its fork action is central to that character. As slider bushings wear, fork stiction increases and the front end loses the precision that makes this bike so rewarding to push. The K-Tech GBS-038 kit restores — and in many cases improves upon — that factory response by pairing hardened steel with a dual copper and PTFE surface treatment. The result is a fork that moves freely and consistently through its stroke, giving the rider clear, unfiltered feedback whether they are threading through a chicane or braking deep into a hairpin.\u003c\/p\u003e\u003ch2\u003eConstruction \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eEach bushing in this kit is manufactured from hardened steel, providing a rigid, dimensionally stable base that resists deformation under the high lateral loads that occur during hard braking and aggressive cornering. The copper layer bonds to the steel substrate and acts as a sacrificial barrier against corrosion and surface damage, while the outer PTFE coating provides the low-friction interface with the fork inner tube. This layered approach is the same technology found in high-end motorsport applications and ensures that the bushings maintain their performance characteristics across a wide range of operating temperatures and conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1199 — model years 2012, 2013 and 2014\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation should be carried out by an authorised K-Tech Service Centre to ensure optimum functionality and maximum safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e55.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e2.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel with copper and PTFE coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eGBS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e2 fork slider bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1199 (2012–2014)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168821010698,"sku":"GBS-038","price":20.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_8e6ce9be-935c-4cff-95a8-5fa7b12e3ca6.png?v=1780816547"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-panigale-1199-s-r","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit – Ducati Panigale 1199 S\/R (2012–2017) FSK-021","description":"\u003cp\u003eEngineered to keep the Öhlins-spec forks of the Ducati Panigale 1199 S and 1199 R performing exactly as Ducati intended, the K-Tech FSK-021 fork oil seal and dust cap kit pairs NOK-manufactured seals — the original-equipment supplier of choice for the world's leading suspension manufacturers — with precisely dimensioned dust caps. Every component is a direct, drop-in replacement that restores factory sealing performance and defends the stanchions against contamination lap after lap or mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured oil seals: the same supplier trusted by top-tier Japanese suspension brands, ensuring exacting dimensional accuracy and long service life.\u003c\/li\u003e\n\u003cli\u003ePrecision 55.00 mm inner diameter and 63.00 mm outer diameter matching the original specification of the Panigale 1199 S and R fork legs.\u003c\/li\u003e\n\u003cli\u003eDust caps provide a robust secondary barrier against road grit, moisture and track debris, protecting the polished stanchion surface between services.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fit — no modification, drilling or adaptation required for the 1199 S or 1199 R.\u003c\/li\u003e\n\u003cli\u003eEqually at home on road machines undergoing routine maintenance and race bikes receiving pre-event rebuilds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage, Design \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has built its reputation on supplying championship-winning teams with components that hold up under the most demanding conditions. The FSK-021 kit reflects that heritage: seals sourced from NOK, a name synonymous with sealing technology across the global motorsport industry, combined with K-Tech's own quality control standards. The result is a kit that looks as purposeful as it performs — clean, correctly finished components that slot straight into the Panigale's fork legs and restore the crisp, precise feel that made the 1199 S and R so celebrated.\u003c\/p\u003e\u003ch2\u003ePerformance \u0026amp; Protection\u003c\/h2\u003e\u003cp\u003eFork oil seals are a consumable, but choosing the wrong replacement compromises every other suspension setting dialled in to the bike. A degraded seal allows oil to migrate past the lip, starving the fork of damping and contaminating the dust wiper and stanchion. The NOK seals in this kit maintain consistent oil-side pressure across the full range of fork travel, preserving rebound and compression damping characteristics whether the forks are set up for a smooth road tour or a circuit weekend. The accompanying dust caps add a second line of defence, sweeping away particles before they reach the oil seal and extending the interval between full fork rebuilds.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the S and R variants of the Ducati Panigale 1199 — it is not suitable for the standard 1199 model. Verify the variant badge on your machine before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 S — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires specialist tools and suspension knowledge. K-Tech recommends that this kit is fitted by an authorised K-Tech Service Centre to ensure correct assembly, optimum function and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FSK-021\u003c\/li\u003e\n\u003cli\u003eInner diameter: 55.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 63.00 mm\u003c\/li\u003e\n\u003cli\u003eSeal manufacturer: NOK\u003c\/li\u003e\n\u003cli\u003eKit contents: 2x oil seals, 2x dust caps\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 S\/R (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168821076234,"sku":"FSK-021","price":52.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_84afda51-1b74-4033-86a9-021e2643a52c.png?v=1780816548"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1199-s-r","title":"K-Tech Fork Slide Bushing Kit – Ducati Panigale 1199 S\/R (2012–2017) GBS-018","description":"\u003cp\u003eRiding the Ducati Panigale 1199 S or R demands a fork that moves with total consistency, every session, every kilometre. The K-Tech Fork Slide Bushing Kit GBS-018 replaces the OEM guide bushings with precision-engineered components built to restore and maintain that factory-smooth fork action — giving you the confidence to push harder without second-guessing your front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured to OEM specification dimensions for a precise, drop-in fit on the Ducati Panigale 1199 S and R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eHardened steel construction with a copper coating delivers outstanding durability and long-term corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces minimise friction throughout the full range of fork travel, producing a noticeably smoother, more responsive fork action\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair so you can carry out a complete, balanced replacement in a single service\u003c\/li\u003e\n\u003cli\u003ePart number GBS-018 makes reordering or cross-referencing straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Detail\u003c\/h2\u003e\u003cp\u003eThe GBS-018 bushing starts as hardened steel — a foundation chosen for its ability to resist deformation under the sustained loads generated by a high-performance superbike. The copper intermediate layer bonds securely to the steel and provides a sacrificial barrier against corrosion, which is particularly valuable on a machine that sees both track and wet road use. Over that, a PTFE coating on all contact faces brings friction down to the minimum achievable, so the fork legs glide on the bushings rather than dragging against them. The result is a fork that responds faithfully to the road surface and your chassis settings, without the stiction that worn or budget bushings introduce.\u003c\/p\u003e\u003ch2\u003eAll-Day Comfort and Fit\u003c\/h2\u003e\u003cp\u003eProper fork bushings are one of the less glamorous but most rider-perceptible components on any sportsbike. When the guide bushings are fresh and correctly sized, the fork tracks straight, absorbs successive bumps cleanly and transmits accurate feedback to your hands. On a long ride — whether canyon roads or a full track day — that translates directly into reduced arm fatigue and greater confidence through braking zones. The OEM-matched dimensions of the GBS-018 mean installation is straightforward and the fit is immediate, with no bedding-in period required before the fork begins performing as it should.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out exclusively by an authorised K-Tech Service Centre. Specialist tools and techniques are required to seat the bushings correctly and safely. Improper installation can affect fork alignment and handling — always consult a qualified technician.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is compatible with the following models only:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis kit is not suitable for the standard (non-S, non-R) Ducati Panigale 1199.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e46.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e1.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel, copper-coated, PTFE-coated contact surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity supplied\u003c\/td\u003e\n\u003ctd\u003e2 (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eGBS-018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168821272842,"sku":"GBS-018","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_f4c36f83-369b-4b0c-a14b-f73f4b50c25c.png?v=1780816554"},{"product_id":"k-tech-federbein-service-kit-ducati-panigale-1199-s-r","title":"K-Tech Shock Absorber Service Kit – Ducati Panigale 1199 S\/R (2012–2017) 205-200-030","description":"\u003cp\u003ePrecision-engineered for the demanding standards of the Ducati Panigale 1199 S and R, the K-Tech shock absorber service kit 205-200-030 brings genuine K-Tech heritage and craftsmanship to every rebuild. Designed to restore — or surpass — factory suspension performance, this kit reflects K-Tech's long-standing reputation at the highest levels of road and track use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete service solution containing every critical seal, bushing and fastener required for a professional shock absorber overhaul\u003c\/li\u003e\n\u003cli\u003eAll components meet or exceed OEM quality standards, ensuring longevity and consistent damping performance after rebuild\u003c\/li\u003e\n\u003cli\u003ePrecision-machined piston rod bushing provides accurate guidance and eliminates lateral play within the damper body\u003c\/li\u003e\n\u003cli\u003eOil seal prevents fluid loss and maintains correct internal pressure throughout the service life of the unit\u003c\/li\u003e\n\u003cli\u003eDust seal protects internal components from contamination by road debris, grit and moisture\u003c\/li\u003e\n\u003cli\u003eComprehensive O-ring set and a new piston rod lock nut included to guarantee a safe, reliable reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKit Contents \u0026amp; Rebuild Quality\u003c\/h2\u003e\u003cp\u003eEvery component in this service kit has been selected to match the exacting tolerances of K-Tech's own damper manufacturing process. The oil seal and dust seal work in combination to maintain a clean, correctly pressurised damper, while the piston rod bushing — machined to a 42.00 mm inner diameter — ensures the rod travels with the precision the Panigale's chassis demands. The full O-ring set covers all internal sealing points, and the dedicated lock nut eliminates any compromise during reassembly. Nothing is left to chance.\u003c\/p\u003e\u003ch2\u003eHeritage \u0026amp; Design Philosophy\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has built its reputation supplying damping solutions to World Superbike, British Superbike and elite road riders alike. The service kit programme is a direct extension of that philosophy: rather than treating suspension maintenance as an afterthought, K-Tech engineers each kit to the same dimensional and material specification as components found in their race-derived dampers. This 205-200-030 kit carries that lineage directly into Panigale ownership, giving privateers access to the same rebuild standard used by professional K-Tech service centres.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eShock absorber servicing requires specialist tooling and technical knowledge. K-Tech strongly recommends installation and rebuild by an authorised K-Tech Service Centre to ensure optimal performance and safety upon completion.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis service kit is compatible exclusively with the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 S — 2012 to 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R — 2012 to 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis kit is not suitable for the standard (non-S, non-R) Ducati Panigale 1199. Please verify your exact model variant before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 205-200-030\u003c\/li\u003e\n\u003cli\u003eInner Diameter: 42.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: 14.00 mm\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 S\/R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eContents: oil seal, dust seal, piston rod bushing, O-ring set, piston rod lock nut\u003c\/li\u003e\n\u003cli\u003eComponent Quality: OEM-grade or above\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168821305610,"sku":"205-200-030","price":31.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVIESET_bee25c16-7774-4782-a401-ab7e33a69bce.png?v=1780816557"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1199-s-r-gbs-019","title":"K-Tech Fork Slide Bush Kit – Ducati Panigale 1199 S\/R (2012–2017) GBS-019","description":"\u003cp\u003eKeeping your Ducati Panigale 1199 S\/R's fork action smooth and precise starts with quality internals, and the K-Tech GBS-019 slide bush kit delivers exactly that at a sensible price. Machined to OEM dimensions, this two-piece set slots straight in during routine fork servicing to restore slick, friction-free travel and extend the working life of your suspension.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM replacement — engineered to original Ducati Panigale 1199 S\/R specifications for a straightforward, no-compromise swap\u003c\/li\u003e\n\u003cli\u003eHardened steel core with copper coating provides the structural rigidity and corrosion resistance needed for long service intervals\u003c\/li\u003e\n\u003cli\u003ePTFE contact surface dramatically reduces stiction, giving the fork a noticeably smoother and more responsive initial stroke\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair so both legs are renewed in a single service, maintaining balanced damping across the front end\u003c\/li\u003e\n\u003cli\u003ePrecise 43\/47 mm bore and OD keep the inner and outer fork tubes perfectly aligned, preserving steering accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Usability\u003c\/h2\u003e\u003cp\u003eThe GBS-019 is the sort of part that repays its modest cost many times over. By combining a hardened steel body, a copper intermediate layer and a low-friction PTFE running face, K-Tech has produced a slide bush that wears more slowly than many stock items and requires less frequent replacement. On a road-going Panigale 1199 that sees regular use across varying conditions, that translates directly into fewer strip-downs, lower long-term maintenance spend and a fork that continues to feel fluid rather than notchy between services.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eWorn slide bushes are one of the most underdiagnosed causes of vague front-end feel. Even minor play in the bush allows the inner tube to deflect laterally under braking and cornering loads, introducing a subtle imprecision that can erode rider confidence. Fitting fresh GBS-019 bushes restores the tight tolerances the Öhlins-derived fork was designed around, so trail-braking into corners and mid-corner feedback both sharpen up noticeably. Whether the 1199 S or R is used on track days or daily commutes, the improvement is felt immediately.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is compatible exclusively with the S and R variants of the Ducati Panigale 1199 produced between 2012 and 2017. It is not suitable for the base Panigale 1199 or any other model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 S — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R — 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eFork bush replacement requires the fork legs to be removed, disassembled and reassembled with the correct tooling. K-Tech recommends installation by an authorised K-Tech Service Centre to ensure full performance and safety. Specialist tools and techniques are required for correct fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eGBS-019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e47.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Thickness\u003c\/td\u003e\n\u003ctd\u003e2.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHardened steel with copper coating and PTFE contact surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 slide bushes per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1199 S\/R (2012–2017)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168821436682,"sku":"GBS-019","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_5b905064-7c66-4216-aa7a-a712e330de8d.png?v=1780816559"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-1299-s","title":"K-Tech Dust Seals Kit for Ducati Panigale 1299 S (2015–2018) – DSS-017","description":"\u003cp\u003eEngineered by NOK — one of the most respected names in fork seal manufacture — the K-Tech Dust Seals Kit DSS-017 delivers precision-grade protection for the front forks of the Ducati Panigale 1299 S. These are direct-replacement dust seals designed to the exact dimensions of the original equipment, ensuring that contamination from road grime, dust and moisture never compromises your fork action or long-term suspension integrity. Installation by an authorised K-Tech Service Centre is strongly recommended to guarantee both safety and peak performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured dust seals — a globally trusted OEM-specification supplier to leading suspension brands, ensuring consistent quality and longevity.\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement with exact dimensional matching (43.00 mm inner diameter, 55.50 mm outer diameter) for the Panigale 1299 S and R forks.\u003c\/li\u003e\n\u003cli\u003eEffective barrier against dust, dirt and moisture ingress, preserving fork oil integrity and maintaining consistent suspension performance across all riding conditions.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair — both fork legs covered in one kit, with no need to source components separately.\u003c\/li\u003e\n\u003cli\u003eFitment-specific design: verified for S and R variants of the Ducati Panigale 1299 (2015–2018) only — not a universal part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Correct Dust Seals Matter\u003c\/h2\u003e\u003cp\u003eThe dust seal is the first line of defence for your fork's internal components. Once contamination bypasses a worn or incorrectly fitted seal, abrasive particles work against the fork stanchion and oil seal behind it, accelerating wear and leading to oil leaks that degrade damping feel. Replacing dust seals at the correct service interval — or whenever fore-and-aft play or scoring is detected — is a straightforward way to protect a far more costly rebuild. The K-Tech DSS-017 kit uses NOK compounds proven to resist ozone, UV exposure and the thermal cycling inherent to road and track use.\u003c\/p\u003e\u003ch2\u003eInstallation Safety Notice\u003c\/h2\u003e\u003cp\u003eThis kit is compatible exclusively with the S and R variants of the Ducati Panigale 1299 produced between 2015 and 2018. It is not suitable for the base 1299 model. K-Tech specifies that fitting should be carried out by an authorised K-Tech Service Centre to ensure the seals are seated correctly and suspension safety is not compromised.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 S — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 R — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eNot suitable for the standard Ducati Panigale 1299 (non-S\/R)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDSS-017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK (supplied by K-Tech)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e55.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e4.70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2x dust seals (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822124810,"sku":"DSS-017","price":25.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS2NEW_81d253d8-0376-4636-8c41-ce5bf26facb8.png?v=1780816585"},{"product_id":"k-tech-staubkappen-dust-seals-kit-ducati-panigale-1299","title":"K-Tech Dust Seals Kit for Ducati Panigale 1299 (2015-2018) – DSS-038","description":"\u003cp\u003ePrecision-engineered from NOK-grade material, the K-Tech DSS-038 dust seals kit delivers factory-level fork protection for the Ducati Panigale 1299 that outlasts OEM rubber. Where inferior seals crack, harden or allow ingress, these NOK-compound dust seals maintain a consistent barrier against road grime, moisture and fine abrasive particles — keeping the fork stanchions and oil seals in the condition they deserve.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-material construction offers exceptional resistance to abrasion, UV degradation and temperature cycling — a step above budget replacement seals.\u003c\/li\u003e\n\u003cli\u003eDirect OEM-equivalent fitment for the Ducati Panigale 1299 (2015–2018): no modification, no compromised seating, no guesswork.\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional tolerances (50.00 mm inner diameter, 63.40 mm outer diameter) ensure the seals locate and seat correctly, eliminating gap-ingress points.\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair so both fork legs are serviced simultaneously — essential for balanced fork performance.\u003c\/li\u003e\n\u003cli\u003eProtects the underlying oil seals from premature wear, reducing the frequency of full fork seal replacement intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eK-Tech sources these dust seals from NOK, one of the most respected seal manufacturers in motorsport and OEM supply chains worldwide. The compound is formulated to remain pliable across the full operating temperature range of a road and track-ridden Panigale 1299, resisting the brittleness that causes cheaper seals to fail within a single season. The geometry — a 4.60 mm primary lip height and 14.00 mm overall installed height — mirrors the original Ducati specification, so the seal wiper maintains correct contact pressure against the stanchion without creating excess drag or premature lip wear.\u003c\/p\u003e\u003ch2\u003ePerformance \u0026amp; Longevity\u003c\/h2\u003e\u003cp\u003eDust seals are the first line of defence for a fork's oil seals. Once grit bypasses a worn or ill-fitting dust seal, it scores the stanchion surface and accelerates oil seal degradation — a failure sequence that ultimately means a full fork service or, worse, stanchion replacement. Fitting the DSS-038 kit at each service interval is straightforward preventive maintenance that pays dividends in fork performance and cost of ownership over the long term.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1299 — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation requires specialist fork tools and a clean working environment. K-Tech recommends that fitting is carried out by an authorised K-Tech service centre to ensure correct seating and optimal fork performance.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDSS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK-Tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e63.40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e4.60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNOK compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 dust seals (one per fork leg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1299 (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822157578,"sku":"DSS-038","price":29.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSSNEW_3207f532-a086-4ab8-ba02-076fd18c61bd.png?v=1780816585"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-1299","title":"K-Tech Oil Seal Kit for Ducati Panigale 1299 (2015–2018) – FSS-038","description":"\u003cp\u003eKeeping your forks in proper working order is one of the most cost-effective things you can do for a Ducati Panigale 1299 — and the K-Tech FSS-038 oil seal kit makes that routine service genuinely straightforward. Manufactured by NOK, the preferred seal supplier to Japan's leading suspension houses, these oil seals deliver exactly the fit and longevity your Marzocchi forks need without any compromise on performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals — the same supplier trusted by top-tier Japanese suspension manufacturers for consistent, high-performance results.\u003c\/li\u003e\n\u003cli\u003ePrecise direct replacement for Ducati Panigale 1299 (2015–2018) fitted with Marzocchi forks — no modification or adaptation required.\u003c\/li\u003e\n\u003cli\u003eDimensioned to spec at 50.00 mm inner diameter, 63.00 mm outer diameter and 11.00 mm height for an accurate, leak-free fit.\u003c\/li\u003e\n\u003cli\u003eComplete kit of two oil seals covers both fork legs in a single purchase — no need to source parts separately.\u003c\/li\u003e\n\u003cli\u003eRestores proper fork oil retention, eliminating weeping seals and maintaining consistent damping performance across road and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Value\u003c\/h2\u003e\u003cp\u003eNOK has long been the benchmark for fork oil seal materials, and K-Tech's decision to source from them reflects the brand's commitment to supplying parts that actually last. The FSS-038 kit is made from high-grade elastomer compounds that resist degradation from fork oil, road grime and temperature cycling — the everyday enemies of any seal. Rather than a budget replacement that sends you back to the bench after a season, this kit is built to match the service intervals of the original components.\u003c\/p\u003e\u003cp\u003eFor Panigale 1299 owners who use the bike regularly — commuting, touring or weekend track days — reliable fork seals mean one less concern in the service schedule. A properly sealed fork holds oil level and pressure consistently, which translates directly into predictable handling and confident braking. The FSS-038 makes it easy to restore that standard without hunting for OEM parts or paying main dealer prices.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eThese seals are designed exclusively for the Ducati Panigale 1299 (2015–2018) with Marzocchi forks. Installation requires specialist tools and technical knowledge. K-Tech recommends fitting be carried out by an authorised K-Tech service centre to ensure full performance and safety.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eFork type: Marzocchi\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFSS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e63.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2x oil seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Manufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFork Type\u003c\/td\u003e\n\u003ctd\u003eMarzocchi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822321418,"sku":"FSS-038","price":35.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1199SIMM_fc0c8ba0-698e-47af-b716-022c378d010b.png?v=1780816595"},{"product_id":"k-tech-simmerring-oil-seals-kit-ducati-panigale-1299-s","title":"K-Tech Oil Seals Kit (FSS-021) – Ducati Panigale 1299 S\/R 2015–2018 Fork Seal Set","description":"\u003cp\u003eKeeping your forks in perfect health is one of the most direct ways to preserve the ride comfort and composed handling that makes the Ducati Panigale 1299 S so rewarding — and the K-Tech FSS-021 Oil Seals Kit makes that maintenance straightforward and dependable. Manufactured by NOK, the world-recognised seal specialist trusted as original equipment supplier by leading Japanese suspension manufacturers, these seals are a direct, dimension-perfect replacement for the factory parts on the 1299 S and 1299 R.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured seals — the same supplier chosen by premium OEM suspension builders for consistent quality and long service life\u003c\/li\u003e\n\u003cli\u003ePrecise OEM-equivalent dimensions (43.00 x 55.10 x 11.00\/14.00 mm) ensure a leak-free fit without modification\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, covering a complete fork service in a single purchase\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for the Ducati Panigale 1299 S and 1299 R — no adaption, no guesswork\u003c\/li\u003e\n\u003cli\u003ePrevents oil weeping and contamination that compromise fork damping, feel and all-day riding comfort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eComfort Starts With Healthy Seals\u003c\/h2\u003e\u003cp\u003eWorn or leaking fork oil seals do more than leave an oily smear on your stanchions. They rob the fork of consistent damping, introduce vagueness into the front end and, over longer rides, turn what should be a composed, plush chassis into something unpredictable and tiring. The FSS-021 kit restores that factory feel — firm yet supple, precise under braking, compliant over surface imperfections — so every ride, whether a weekend blast on a favourite road or a full track day, remains as comfortable and confidence-inspiring as the Panigale 1299 was designed to be.\u003c\/p\u003e\u003ch3\u003eNOK Quality\u003c\/h3\u003e\u003cp\u003eNOK is globally acknowledged as the benchmark in oil seal technology. Their compounds resist the temperature cycling and hydraulic pressure inherent in high-performance fork cartridges, maintaining an effective seal over a service life that matches or exceeds the original equipment. Sourcing through K-Tech means you receive genuine NOK product backed by K-Tech's exacting quality control.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the S and R variants of the Ducati Panigale 1299. Please confirm your model before ordering — it is not suitable for the standard (non-S, non-R) Panigale 1299.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 S — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 R — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires specialist tools and technical knowledge. Fitting should be carried out by an authorised K-Tech Service Centre to ensure full performance and safety.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFSS-021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK (supplied by K-Tech)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e55.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (1)\u003c\/th\u003e\n\u003ctd\u003e11.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (2)\u003c\/th\u003e\n\u003ctd\u003e14.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 oil seals (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1299 S\/R (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822386954,"sku":"FSS-021","price":33.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FSS_94159566-c708-46ae-8656-f16122885ea0.png?v=1780816603"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-panigale-1299","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit for Ducati Panigale 1299 (2015–2018) FSK-038","description":"\u003cp\u003eEngineered to the exacting standards that define K-Tech's suspension heritage, this fork oil seal and dust cap kit restores the Ducati Panigale 1299's front end to factory-fresh performance. Every seal in this kit is manufactured by NOK — the Japanese precision-sealing specialist chosen as original equipment supplier by numerous leading suspension manufacturers precisely because of their unmatched consistency and longevity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-manufactured oil seals: the same trusted supplier used by OEM suspension builders across Japan, ensuring genuine quality rather than an aftermarket compromise.\u003c\/li\u003e\n\u003cli\u003eComplete front fork sealing solution — two oil seals and two dust caps address both the primary source of fork oil loss and the ingress of road contamination in a single purchase.\u003c\/li\u003e\n\u003cli\u003ePrecision-dimensioned at 55.00 mm inner diameter and 63.00 mm outer diameter, matching the original Panigale 1299 fork specification exactly.\u003c\/li\u003e\n\u003cli\u003eDust caps act as the first line of defence against grit, mud and moisture, protecting the oil seal lips and prolonging fork tube life.\u003c\/li\u003e\n\u003cli\u003ePart number FSK-038 is specific to the 2015–2018 Ducati Panigale 1299, eliminating any compatibility guesswork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eK-Tech Suspension has spent decades supplying suspension components to World Superbike and British Superbike teams, and that competition-bred philosophy carries directly into every road-going product bearing the K-Tech name. The FSK-038 kit reflects that lineage: the seals are not generic off-the-shelf items but purpose-selected NOK units specified to match the geometry and operating pressures of the Panigale 1299 forks. The result is a kit that looks correct at installation, seats cleanly without modification, and maintains that factory-fresh feel ride after ride.\u003c\/p\u003e\u003ch2\u003eWhy Fork Seals Matter\u003c\/h2\u003e\u003cp\u003eA weeping fork seal is more than a cosmetic issue. Once fork oil migrates past a degraded seal it contacts the brake disc and pads, creating a potentially dangerous reduction in braking performance. On a motorcycle as capable as the Ducati Panigale 1299, maintaining the integrity of the front suspension is not optional — it is fundamental to the bike performing as Ducati intended. Replacing seals at the first sign of seepage, or as part of a scheduled fork service, keeps damping characteristics consistent and protects the investment you have made in your machine.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eK-Tech recommends installation exclusively by an authorised K-Tech Service Centre. Correct fitment requires specialist tools and technical knowledge to ensure the safety and full performance of the suspension system.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1299 — model years 2015, 2016, 2017 and 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e55.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e63.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit contents\u003c\/td\u003e\n\u003ctd\u003e2x oil seals, 2x dust caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal manufacturer\u003c\/td\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFSK-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822452490,"sku":"FSK-038","price":68.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SERVICEKITBMW_c05ddd84-adc9-49de-bfbf-375e406353da.png?v=1780816604"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1299-15-18-gbs-038","title":"K-Tech Fork Slide Bush Kit for Ducati Panigale 1299 (2015-2018) GBS-038","description":"\u003cp\u003eSmooth, precise fork action is the foundation of confident braking and all-day riding comfort, and the K-Tech GBS-038 slide bush kit is engineered to deliver exactly that for the Ducati Panigale 1299 (2015–2018). A direct OEM replacement manufactured to K-Tech's exacting standards, this kit restores and improves upon the factory fork feel from the very first ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with a copper finish provides outstanding resistance to wear and corrosion, extending service life well beyond standard bushes.\u003c\/li\u003e\n\u003cli\u003ePTFE-coated contact surfaces dramatically reduce friction on moving fork components, resulting in a noticeably smoother, more responsive fork stroke.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement — engineered to match the Ducati Panigale 1299 factory specification for a precise, rattle-free fit without modification.\u003c\/li\u003e\n\u003cli\u003eComplete kit includes two slide bushes, covering the full fork replacement in one purchase.\u003c\/li\u003e\n\u003cli\u003ePrecise dimensional tolerances (50.00 mm inner diameter, 55.00 mm outer diameter, 15.00 mm height, 2.50 mm wall thickness) ensure consistent performance and correct seating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eK-Tech has built its reputation on suspension components that genuine racing engineers and serious road riders trust. The GBS-038 bushes are manufactured from hardened steel — far more durable than the softer alloys used in budget alternatives — then finished with a copper layer that aids initial bedding and long-term corrosion protection. The PTFE coating on the sliding contact faces reduces static and dynamic friction simultaneously, which translates into a fork that responds earlier and more progressively, whether you are scrubbing off speed before a tight corner on the road or managing trail-braking on a circuit.\u003c\/p\u003e\u003cp\u003eThe result is improved feedback through the bars, reduced stiction on low-speed compressions, and a more consistent damping curve throughout the fork's travel. Over a long day in the saddle, that reduction in harshness adds up to noticeably less fatigue — the Panigale's already capable chassis is freed to work as intended.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eThese bushes are designed exclusively for the Ducati Panigale 1299 (2015–2018). Correct installation requires specialist fork tools and techniques. K-Tech recommends fitting be carried out by an authorised K-Tech Service Centre to ensure proper assembly and maximum safety.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1299 — 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eGBS-038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e50.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e55.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003e2.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel with copper finish and PTFE-coated contact surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2 slide bushes per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1299 (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822518026,"sku":"GBS-038","price":20.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_7a871319-d785-4b78-a0f4-8d146122a309.png?v=1780816607"},{"product_id":"k-tech-gabel-simmerring-staubkappen-kit-ducati-panigale-1299-s","title":"K-Tech Fork Oil Seal \u0026 Dust Cap Kit for Ducati Panigale 1299 S (2015–2018) FSK-021","description":"\u003cp\u003ePrecision-engineered from NOK seals — the benchmark choice of leading Japanese suspension manufacturers — this K-Tech fork oil seal and dust cap kit delivers the kind of long-term reliability that factory-fit components rarely sustain. Designed specifically for the Ducati Panigale 1299 S and 1299 R, it restores your forks to as-new sealing performance whether you demand it road or track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNOK-sourced oil seals: the same premium sealing compound trusted by top-tier Japanese suspension OEMs for lasting, leak-free performance\u003c\/li\u003e\n\u003cli\u003ePrecisely dimensioned to 55.00 mm inner diameter and 66.00 mm outer diameter, ensuring a factory-accurate interference fit\u003c\/li\u003e\n\u003cli\u003eDust caps guard the fork legs against ingress of water, grit and road debris — extending service intervals and protecting the oil seals beneath\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement: no modification required, fits straight into the original seal housings of the Panigale 1299 S and R fork legs\u003c\/li\u003e\n\u003cli\u003eKit part number FSK-021 — a genuine K-Tech service component backed by the brand's suspension expertise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eK-Tech specify NOK as their seal supplier for good reason. NOK manufacture to tolerances that satisfy the exacting demands of Showa, KYB and Öhlins production lines, and that same quality translates directly into your Ducati's forks. The compound resists degradation from fork oil, temperature cycling and UV exposure, so the seals remain supple and effective across thousands of kilometres — not just for one season.\u003c\/p\u003e\u003cp\u003eThe matching dust caps are equally well-specified, forming a tight wiper seal across the fork stanchion surface to keep contaminants away from the oil seals. Together, the two components work as a system rather than an afterthought, which is why K-Tech package them as a single kit rather than selling them separately.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Application\u003c\/h2\u003e\u003cp\u003eThe Panigale 1299 S was built to be ridden hard, and its Öhlins NIX-30 forks operate under considerable load — both on the road and at circuit pace. Worn or weeping fork seals rob you of consistent damping response and can contaminate the brake disc if left unchecked. Replacing both seals and dust caps together at the same service interval is the professional approach, and this K-Tech kit makes it straightforward. Installation at an authorised K-Tech Service Centre is recommended; specialist tools and technical knowledge are required to ensure safety and optimum fork function.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is compatible exclusively with the S and R variants of the Ducati Panigale 1299. It is not suitable for the standard 1299 model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 S — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 R — please verify fork specification matches before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFSK-021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e55.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e63.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal Manufacturer\u003c\/th\u003e\n\u003ctd\u003eNOK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003e2x oil seals, 2x dust caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1299 S \/ R (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822583562,"sku":"FSK-021","price":52.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KappenKit_52f75d34-504e-4516-a87f-8a2e0fc2fb79.png?v=1780816608"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1299-s","title":"K-Tech Fork Slide Bush Kit – Ducati Panigale 1299 S\/R (2015–2018) GBS-018","description":"\u003cp\u003eWhen lap times matter and suspension precision is non-negotiable, the K-Tech GBS-018 fork slide bush kit delivers the consistent, low-friction fork action that the Ducati Panigale 1299 S and R demand on track. Manufactured to exact OEM dimensions in hardened steel with a copper coating and PTFE-lined contact surfaces, this kit restores factory fork feel — or improves on worn originals — with components engineered to the same standards as K-Tech's race-proven suspension programme.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePTFE-coated contact faces reduce sliding friction for smoother, more responsive fork movement under hard braking and high-speed compression\u003c\/li\u003e\n\u003cli\u003eHardened steel construction with copper coating provides long service life and effective corrosion resistance — essential for bikes that see both track and wet-weather road use\u003c\/li\u003e\n\u003cli\u003eManufactured to precise OEM specifications (inner diameter 43.00 mm, outer diameter 46.00 mm) for a direct, fuss-free installation\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair, covering both fork legs in a single purchase\u003c\/li\u003e\n\u003cli\u003eExclusive to the S and R variants of the Ducati Panigale 1299 — engineered for the correct fork internals fitted to those models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe Panigale 1299 S and R are equipped with sophisticated fully adjustable forks that reward precise setup work. Worn or high-friction slide bushes introduce vague feedback, inconsistent damping and unpredictable handling — precisely the conditions that cost time at the apex. The GBS-018 kit eliminates that variable. The PTFE surface treatment keeps stiction to a minimum across the full range of fork travel, allowing the damping cartridge to work as intended whether you are trail-braking into a fast chicane or absorbing kerbs mid-corner.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eK-Tech machines each bush in hardened steel and applies a copper undercoat before the PTFE finish. The copper layer acts as a bonding interface that improves coating adhesion and adds a secondary barrier against moisture ingress — useful when the bike is stored between track days. Dimensional tolerances follow OEM drawings exactly, so the bushes locate correctly without shimming or modification.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation requires specialist fork tooling and technical knowledge. K-Tech strongly recommends fitting by an authorised K-Tech Service Centre to ensure correct assembly and protect the fork components.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models only:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 S — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 R — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot compatible with the standard (non-S\/non-R) Ducati Panigale 1299.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eGBS-018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInner Diameter\u003c\/th\u003e\n\u003ctd\u003e43.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e46.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e15.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003e1.50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel with copper coating and PTFE-lined contact surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied Quantity\u003c\/th\u003e\n\u003ctd\u003e2 slide bushes (one pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822616330,"sku":"GBS-018","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_53eb336b-92a7-4359-938a-ad3a89ae6684.png?v=1780816612"},{"product_id":"k-tech-gleitbuchsen-kit-ducati-panigale-1299-s-gbs-019","title":"K-Tech Slide Bush Kit for Ducati Panigale 1299 S\/R (2015–2018) – GBS-019","description":"\u003cp\u003eRiders who demand all-day composure from their Panigale 1299 S or R know that fork feel starts long before the compression circuit. The K-Tech Slide Bush Kit GBS-019 replaces the OEM fork guide bushes with precision-manufactured items built to tighter tolerances, so the fork tracks accurately and moves freely without the stiction that dulls feedback and fatigues your hands over a long session or a full day in the saddle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction with copper coating delivers long service life under repeated compression and rebound cycles.\u003c\/li\u003e\n\u003cli\u003ePTFE contact surface dramatically reduces friction, giving the fork a smoother, more consistent action from the first millimetre of travel.\u003c\/li\u003e\n\u003cli\u003eOEM-specification dimensions (43.00 mm inner diameter, 47.00 mm outer diameter, 15.00 mm height, 2.00 mm wall thickness) ensure a direct, rattle-free fit.\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair so both fork legs are renewed simultaneously, preserving balanced handling.\u003c\/li\u003e\n\u003cli\u003eCompatible exclusively with the S and R variants of the Ducati Panigale 1299 — engineered to the correct fork tube diameter for those models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Performance\u003c\/h2\u003e\u003cp\u003eK-Tech engineers the GBS-019 from hardened steel rather than the softer alloys found in some aftermarket alternatives. The copper intermediate layer bonds reliably to the steel substrate and acts as a sacrificial bearing surface during the running-in period, while the PTFE outer face provides the low-friction interface that contacts the fork tube day after day. The result is a bush that resists galling and oval wear far longer than a standard replacement, maintaining precise fork alignment and consistent damping response throughout its service life.\u003c\/p\u003e\u003cp\u003eOn the road, the difference is felt as a reduction in that characteristic initial stiction — the momentary resistance at the top of the stroke when the fork is cold or when fine road texture is trying to deflect the front wheel. With the GBS-019 installed, the front end stays more composed under braking into slow corners and tracks more faithfully over mid-corner bumps, translating directly into rider confidence and reduced arm-pump on longer rides.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eInstallation of fork slide bushes requires fork disassembly, specialist pressing tools and the knowledge to set the correct seating depth. K-Tech specifies that fitting must be carried out by an authorised K-Tech Service Centre to guarantee optimal performance and safety. Please contact your nearest centre before ordering if you are unsure of the service availability in your region.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe GBS-019 is designed for the following models only:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 S — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 R — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis kit is not suitable for the standard (non-S, non-R) Ducati Panigale 1299. If you are unsure of your model variant, check the frame identification plate or consult your Ducati dealer before purchasing.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: GBS-019\u003c\/li\u003e\n\u003cli\u003eInner diameter: 43.00 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 47.00 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15.00 mm\u003c\/li\u003e\n\u003cli\u003eWall thickness: 2.00 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: hardened steel with copper coating and PTFE contact surface\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 slide bushes (one pair)\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 S \/ 1299 R (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Tech","offers":[{"title":"Default Title","offer_id":53168822649098,"sku":"GBS-019","price":19.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GBSKIT_e965e5bb-c6d0-418f-b4d3-0c51a8cc25b4.png?v=1780816613"}],"url":"https:\/\/inter-pace.com\/en-pl\/collections\/suspension-service.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}