Accossato brake lever EDF033 with black blade and black hub for Honda CB1000R (2018-2019)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC brake lever for the original mounting
Part numberEDF033
FunctionFront brake lever, right hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentHonda CB1000R (2018–2019)
Road approvalNone documented, track use only
DescriptionThe whole story▼

With the 2018 CB1000R, Honda kept the recipe of a four-cylinder naked with a single-sided swingarm and gave it a new, stripped-back look under the Neo Sports Café label. It is a bike many owners put away for the colder months and bring out again in spring, and the first ride of the season is a good moment to look at the controls. Accossato's EDF033 fits that moment: an aluminium brake lever for the 2018 and 2019 CB1000R that you can set closer to or further from the grip, made in three blade lengths.

Key Features

  • Front brake lever for the Neo Sports Café CB1000R, 2018 and 2019
  • Mounts on the original Honda master cylinder
  • Distance to the grip adjustable near the pivot
  • Blade short, standard (roughly 138 mm) or long
  • Seven anodised blade colours with a black hub
  • One-piece fixed lever, no folding joint
  • Supplied in an Accossato box

Construction and Material Quality

Machined on CNC equipment from aluminium and then anodised, the EDF033 combines a black hub with a coloured blade. The hub contains the pivot and the reach adjuster, and the blade is fixed to it rigidly, with no hinge anywhere along its length. Anodising makes the colour part of the aluminium's surface rather than a layer on top of it, which helps on a CB1000R that may spend a winter in a damp garage: there is no paint to lift at the edges, and a wipe with a soft cloth is usually all the finish needs in spring.

The First Ride After Winter

Months off the bike blunt the reflexes that matter most in an emergency, and braking is one of them. Before the first spring ride on the CB1000R, check the brake fluid level in the reservoir, look at the pads, and make sure the lever feels firm rather than spongy after a winter of standing. Then set the reach for the gloves you will actually wear; a lever adjusted in the autumn for thick gloves can end up too far away for a thinner spring pair. Out on the road, give the tyres a few miles to come up to temperature, then find a quiet, straight stretch and practise several progressively firmer stops, so your hand relearns how much pressure the front brake needs. The short EDF033 suits riders who brake with two fingers; the standard and long blades suit a four-finger technique. None of this takes long, and it means the first unexpected stop of the year does not come as a surprise.

Fitment and Compatibility

The listing for the EDF033 covers the CB1000R of 2018 and 2019, the first two model years of the Neo Sports Café generation, and the lever mounts on the original master cylinder. Later model years are not covered by this listing. On the clutch side, Accossato's ESY688H is listed for a longer run, from 2018 to 2024. Blue, gold, green and orange blades exist in every length; silver in standard and short; black and red only as standard levers.

Road Approval

The EDF033 is sold for circuit use, as there is no documented German ABE for it.

Scope of Delivery

You receive one brake lever, anodised in the colour you selected and made in your chosen length, in Accossato packaging.

Specifications

  • Part number: EDF033
  • Type: fixed brake lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Honda CB1000R, 2018 to 2019
What's includedEverything in the box▼
  • 1x Accossato CNC brake lever in its own box
FitmentWhich bikes this fits▼
  • Honda CB1000R (2018–2019)
  • Honda CB 1000 R RA (2008–2016)
  • Honda CBR 1000 RR (2004–2019)
  • Honda CBR 600 RR (2007–2021)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.