Spark Exhaust Force EVO titanium slip-on silencer with carbon end cap for Kawasaki ZX-10 R/RR 2016-2020
-2.9 k g
02 · Data & docs

The facts.

Technical data
Part NumberGKA8818T
System Type3/4 system (slip-on silencer + cat replacement pipe)
Header MaterialTitanium
Silencer MaterialTitanium
End Cap MaterialCarbon
Weight Saving-2.9 kg (OEM 7.0 kg reduced to 4.1 kg)
Sound Level (without db-killer)approx. 110 dB at 5,500 rpm
Sound Level (with db-killer)approx. 105 dB at 5,500 rpm
FitmentKawasaki ZX-10 R / ZX-10 RR (2016-2020)
OriginMade in Italy
DescriptionThe whole story▼

Engineered for track-focused ZX-10 R and ZX-10 RR riders who demand every advantage, the Spark Exhaust Force EVO 3/4 system pairs a titanium header section with a titanium Force EVO slip-on silencer and carbon end cap to deliver a 2.9 kg weight saving, sharper throttle response, and an unmistakably aggressive exhaust note. Part number GKA8818T — made in Italy to the exacting standards that make Spark a fixture in World Superbike paddocks.

Key Features

  • Full 3/4-system configuration: Force EVO slip-on silencer plus catalytic converter replacement pipe for maximum flow and performance gains over a slip-on-only fitment.
  • Titanium header and silencer construction: exceptional strength-to-weight ratio, outstanding heat resistance, and a corrosion-free finish that holds up to relentless track use.
  • Carbon end cap: race-bred visual identity with added structural rigidity at the silencer tip.
  • Genuine 2.9 kg weight reduction (from 7.0 kg down to 4.1 kg), lowering unsprung and overall mass for improved chassis dynamics and agility through the corners.
  • Removable db-killer included: run at approximately 110 dB at 5,500 rpm on track without it, or approximately 105 dB at 5,500 rpm with it fitted for road compliance.
  • Exhaust springs and full fitting hardware included — compatible with stock fairings and radiators for a straightforward installation.

Race Performance & Sound

The Force EVO's titanium pipework flows exhaust gases more efficiently than the heavy OEM system, freeing up mid-range response and top-end pull exactly where the ZX-10 R/RR's inline-four thrives on track. The catalytic converter replacement pipe removes a significant restriction, working in concert with the silencer to extract the full acoustic character of the engine — a hard, spine-tingling note that is unmistakably race-bred rather than artificially augmented.

The db-killer threads in and out in seconds, giving you a single system that transitions between track day, race circuit, and public road without compromise. To extract the maximum power potential, Spark recommends pairing this exhaust with a dedicated race ECU map or a custom dyno tune.

Build Quality & Italian Craftsmanship

Every Spark system is manufactured in Italy using aerospace-grade titanium and hand-finished carbon fibre. The welds, the fitment tolerances, and the bracket geometry are all optimised for the ZX-10 R/RR chassis — there are no adaptor bodges or poorly aligned mounting points. The result is a component that looks as purposeful as it performs, sitting flush with the stock bodywork without modification.

Fitment & Compatibility

This system is designed exclusively for the following models:

  • Kawasaki ZX-10 R (2016, 2017, 2018, 2019, 2020)
  • Kawasaki ZX-10 RR (2016, 2017, 2018, 2019, 2020)

Compatible with original fairings and radiators. No fairing modification required. A race map or dyno session is strongly recommended to realise full performance gains.

Specifications

Attribute Detail
Part Number GKA8818T
System Type 3/4 system (slip-on silencer + cat replacement pipe)
Header Material Titanium
Silencer Material Titanium
End Cap Material Carbon
Weight Saving -2.9 kg (OEM 7.0 kg reduced to 4.1 kg)
Sound Level (without db-killer) approx. 110 dB at 5,500 rpm
Sound Level (with db-killer) approx. 105 dB at 5,500 rpm
Fitment Kawasaki ZX-10 R / ZX-10 RR (2016-2020)
Origin Made in Italy
What's includedEverything in the box▼
  • 1x Spark Force EVO titanium slip-on silencer with carbon end cap
  • 1x catalytic converter replacement pipe
  • 1x removable db-killer
  • Exhaust springs and full fitting hardware
FitmentWhich bikes this fits▼
  • Kawasaki ZX-10 R
  • Kawasaki ZX-10 RR
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.