Accossato off-road folding clutch lever C7127 with black blade for Kawasaki KLX 125 (2010-2016)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeCNC folding off-road clutch lever for the original clutch mount
Part numberC7127
FunctionClutch lever, left hand
MaterialMachined from solid Ergal 7075 aluminium alloy
Blade coloursBlack, green
Lever designLonger lever for four fingers
FoldingHinged blade tips forward in a fall (anti-break design)
FitmentKawasaki KLX 125 (2010–2016)
Road approvalNone documented, off-road use only
DescriptionThe whole story▼

A 125cc four-stroke has enough pull for most trails, but not much in reserve, and nowhere is that clearer than when you have to set off halfway up a slope. On a Kawasaki KLX 125, a hill start off-road is a small exercise in coordination: rear brake on, revs up, clutch out to the friction point, brake off, all without rolling back or stalling. The C7127 is Accossato's folding clutch lever for the KLX 125 of 2010 to 2016, CNC-machined from Ergal 7075 in Italy, with a long blade for four fingers.

Key Features

  • Folding clutch lever for the Kawasaki KLX 125, 2010 to 2016
  • Takes the place of the stock lever at the original clutch mount
  • Longer blade, four-finger layout
  • Anti-break joint gives the blade a chance to fold forward in a fall
  • Machined from solid Ergal 7075 in Italy
  • Black or green blade with a dark base
  • No German ABE documented; off-road use only

Construction and Material Quality

Accossato cuts the C7127 out of solid Ergal 7075 on CNC machines in Italy. The high-strength aluminium alloy was chosen with three goals in mind: strength, lightness and reliability. The finished lever is in two parts, a dark base that stays on the pivot at the clutch mount and a blade in black or green that is attached to it by a joint. That joint is the reason the blade can fold. Because the C7127 works the clutch, its blade is longer than the brake lever's, designed for four fingers.

Pulling Away on a Slope

The technique is the same whether the hill is a grassy bank or a stony track. Stop with the bike pointing straight up the slope, not across it, and hold it on the rear brake with your right foot while the left foot takes your weight on the ground. Select first, raise the revs a little more than you would on the flat, and let the clutch out until you feel the bike start to pull against the brake. Then release the brake, feed in the rest of the clutch and add throttle as the KLX 125 moves off. If the rear wheel spins, ease the throttle rather than pulling the clutch in.

Most people stall a few times before it works. The bike stops, starts to roll back, and the instinct is to grab the front brake and put a foot down, and on a slope the ground is further away than it looks. Many of those moments end with the KLX 125 lying on its left side, pointing uphill, the clutch lever against the ground. The C7127's joint lets the blade fold forward rather than taking the full weight at its tip, which gives it a good chance of coming through. Pick the bike up, reset, and try again from a slightly gentler part of the slope.

Fitment and Compatibility

The C7127 is listed by Accossato for the Kawasaki KLX 125 built from 2010 to 2016 and replaces the standard lever at the original clutch mount. For the same years there is the B8145 folding brake lever; black and green are available on both.

Road Approval

The C7127 comes without a documented German ABE. On a road-registered KLX 125 it is therefore not approved for public roads and belongs on private off-road ground or in competition.

Scope of Delivery

The C7127 clutch lever, supplied singly, blade in black or green.

Specifications

  • Part number: C7127
  • Type: CNC folding off-road clutch lever for the original clutch mount
  • Material: machined from solid Ergal 7075 aluminium alloy, made in Italy
  • Blade colours: black, green
  • Lever design: longer lever for four fingers
  • Folding: hinged blade that can tip forward in a fall (anti-break design)
  • Road approval: none documented, off-road use only
  • Fitment: Kawasaki KLX 125 (2010–2016)
What's includedEverything in the box▼
  • 1x Accossato CNC off-road clutch lever
FitmentWhich bikes this fits▼
  • Kawasaki KLX 125 (2010–2016)
  • Kawasaki KLX 125 D-TRACKER (2010–2016)
  • Kawasaki KLX 150 D-TRACKER (2016)
  • Kawasaki KLX 250 (2009–2017)
  • Kawasaki KLX 250 D-TRACKER (2008–2016)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.