{"title":"Turn signals","description":null,"products":[{"product_id":"lightech-led-turn-signals-aprilia-dorsoduro-1200-2011-2016-fre939ner","title":"LighTech LED Turn Signals Aprilia DORSODURO 1200 (2011-2016) – FRE939NER","description":"\u003cp\u003eStandard indicators stick out where a tail tidy is trying to clean up. LighTech's FRE939NER is a pair of machined aluminium turn signals carrying E8 approval. LighTech intends it to be combined with its own plate holders on the DORSODURO 1200.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the DORSODURO 1200 LighTech recommends a specific relay or resistor in that case. We can tell you before you order whether the DORSODURO 1200 is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech builds the FRE939NER to sit on one of its holders. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the DORSODURO 1200 (2011 to 2016). The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Use the original cable runs where you can; they are already clear of the wheel. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. An approved indicator in the wrong position is still a fault at inspection. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899243159818,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_5c31de12-63d6-4018-ac13-815603e10114.png?v=1791896718"},{"product_id":"lightech-led-turn-signals-aprilia-dorsoduro-900-2017-2020-fre939ner","title":"LighTech LED Turn Signals Aprilia DORSODURO 900 (2017-2020) – FRE939NER","description":"\u003cp\u003eFactory indicators on a DORSODURO 900 are sized for a crash test, not for the eye. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Aprilia DORSODURO 900. Check what the indicator will be mounted to before ordering. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a DORSODURO 900 is visible from behind. The FRE939NER is an E8-approved pair that can go on the front or the rear. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. LighTech states that some motorcycles need a specific relay or resistor. An LED draws too little current for a standard flasher on the DORSODURO 900, which then blinks at double speed. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe E8 mark on the FRE939NER is a component approval granted in the EU. A component approval says nothing about where the part may sit on the motorcycle — that is national law. Ask before you fit it to a registered DORSODURO 900 if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899248009482,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_c68209d7-6b9e-4e71-bfe0-307cd336f23a.png?v=1791896723"},{"product_id":"lightech-led-turn-signals-aprilia-rs-457-2024-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia RS 457 (2024-2026) – FRE939NER","description":"\u003cp\u003eThe rear of an RS 457 is defined by what hangs off it. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. The listing covers the RS 457 across 3 model years (2024 to 2026).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the RS 457. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the RS 457 LighTech recommends a specific relay or resistor in that case. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of an RS 457 is visible from behind. The FRE939NER is an E8-approved pair that can go on the front or the rear. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Aprilia RS 457. Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Use the original cable runs where you can; they are already clear of the wheel. Nothing on the RS 457 is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. No brackets are included — on the RS 457 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. For a road-registered RS 457, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261018378,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_802eed0c-780c-4df3-b76e-a1b9fb100b40.png?v=1791896729"},{"product_id":"lightech-led-turn-signals-aprilia-rs-660-2020-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia RS 660 (2020-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on an RS 660 are sized for a crash test, not for the eye. LighTech's FRE939NER is a pair of machined aluminium turn signals carrying E8 approval. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eListed for the Aprilia RS 660\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eCovers the RS 660 across 7 model years (2020 to 2026)\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of an RS 660 is visible from behind. The FRE939NER is designed around LighTech's own tail tidies. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the RS 660, model years 2020 to 2026. It is the mount, not the model, that determines whether it bolts up. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eOne electrical point before you order the FRE939NER. Some RS 660 wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Resistors or an LED relay are separate part numbers where the RS 660 needs them.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. Component approval and roadworthiness of the finished installation are two different things. If the RS 660 carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261051146,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_4eb172a0-ecd0-4883-859f-40db56364c77.png?v=1791896733"},{"product_id":"lightech-led-turn-signals-aprilia-rsv4-1100-factory-2019-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia RSV4 1100 Factory (2019-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on an RSV4 1100 Factory are sized for a crash test, not for the eye. The FRE939NER is a universal pair — front or rear, 128 g. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eCovers the RSV4 1100 Factory across 8 model years (2019 to 2026)\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the RSV4 1100 Factory\u003c\/li\u003e\n\u003cli\u003eListed for the Aprilia RSV4 1100 Factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of an RSV4 1100 Factory is visible from behind. The FRE939NER is designed around LighTech's own tail tidies. Sold as a pair, so one order covers one end of the RSV4 1100 Factory.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Seal the connections against water rather than relying on the plug alone. Nothing on the RSV4 1100 Factory is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Aprilia RSV4 1100 Factory. Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. The manufacturer's own words: for some motorcycles it may be necessary to use specific relays or resistors. The RSV4 1100 Factory may be one of them. Ask us whether your RSV4 1100 Factory is known to need a resistor; we would rather check than guess.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. No brackets are included — on the RSV4 1100 Factory they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. Mounting positions, minimum distances and visibility angles are not covered by the component approval. Ask before you fit it to a registered RSV4 1100 Factory if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261182218,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_2db1e6d0-c02f-4ca6-9cd4-bb44be70ae46.png?v=1791896737"},{"product_id":"lightech-led-turn-signals-aprilia-rsv4-1100-2021-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia RSV4 1100 (2021-2026) – FRE939NER","description":"\u003cp\u003eNothing dates an RSV4 1100 faster than its original turn signals. The LighTech FRE939NER is a pair of aluminium LED indicators, E8 approved, 128 g. The listing covers the RSV4 1100 across 6 model years (2021 to 2026).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsable at the front and at the rear of the RSV4 1100\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. Some RSV4 1100 wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the RSV4 1100 (2021 to 2026). It is the mount, not the model, that determines whether it bolts up. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of an RSV4 1100. The FRE939NER is an E8-approved pair that can go on the front or the rear. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Resistors or an LED relay are separate part numbers where the RSV4 1100 needs them.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. The mark means the part may be sold and used; it does not pre-approve your installation. We would rather you asked your inspection body than discovered it at the next test.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261247754,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_14a4a054-b2b3-407f-9760-05abb8e35cf5.png?v=1791896741"},{"product_id":"lightech-led-turn-signals-aprilia-rsv4-2009-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia RSV4 (2009-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on an RSV4 are sized for a crash test, not for the eye. The LighTech FRE939NER is a pair of aluminium LED indicators, E8 approved, 128 g. LighTech intends it to be combined with its own plate holders on the RSV4.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of an RSV4. At 128 g the FRE939NER adds almost nothing where the original was bulky. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Route the cables so nothing is pinched when the suspension moves. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Aprilia RSV4, 2009 to 2026. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the RSV4 a load resistor or an LED relay restores normal behaviour. It is a five-minute job for someone who knows the loom of the RSV4, and a long evening for someone who does not.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the LighTech range, the FRE939NER is a type-approved component: E8. The approval travels with the part; whether the fitted position is legal is a separate question. If the RSV4 carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261280522,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_cd65da85-c2c4-4282-b226-be5a2402c60b.png?v=1791896745"},{"product_id":"lightech-led-turn-signals-aprilia-tuono-457-2025-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia TUONO 457 (2025-2026) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a TUONO 457 more than paint does. LighTech's FRE939NER is a pair of machined aluminium turn signals carrying E8 approval. LighTech lists it for the TUONO 457.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the TUONO 457\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. The FRE939NER is an E8-approved pair that can go on the front or the rear. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Route the cables so nothing is pinched when the suspension moves. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the TUONO 457, model years 2025 to 2026. It is the mount, not the model, that determines whether it bolts up. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Whether the TUONO 457 needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. Ask us whether your TUONO 457 is known to need a resistor; we would rather check than guess.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Resistors or an LED relay are separate part numbers where the TUONO 457 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. The approval travels with the part; whether the fitted position is legal is a separate question. One call to your inspection body settles the position question for the TUONO 457.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261313290,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_d715db00-a46f-40f1-9855-6226df090bae.png?v=1791896749"},{"product_id":"lightech-led-turn-signals-aprilia-tuono-660-2020-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia TUONO 660 (2020-2026) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a TUONO 660 more than paint does. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. The pair carries E8 type approval as a component.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eListed for the Aprilia TUONO 660\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a TUONO 660. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the TUONO 660 (2020 to 2026). It is the mount, not the model, that determines whether it bolts up. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Test all functions with the ignition on before the first ride. Nothing on the TUONO 660 is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. Double-speed flashing after fitting the FRE939NER is not a fault in the part — it is the TUONO 660 reporting a lamp it can no longer measure. The resistor kits are listed separately — tell us your TUONO 660 and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. Ask before you fit it to a registered TUONO 660 if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261346058,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_bdd45c0a-0646-480f-ae16-f07e532c97b1.png?v=1791896754"},{"product_id":"lightech-led-turn-signals-aprilia-tuono-v4-1100-factory-2021-2026-fre939ner","title":"LighTech LED Turn Signals Aprilia TUONO V4 1100 FACTORY (2021-2026) – FRE939NER","description":"\u003cp\u003eOn a TUONO V4 1100 FACTORY the indicators are the cheapest visible thing to change. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. The FRE939NER is designed around LighTech's own tail tidies. Sold as a pair, so one order covers one end of the TUONO V4 1100 FACTORY.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the TUONO V4 1100 FACTORY a load resistor or an LED relay restores normal behaviour. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe listing is the TUONO V4 1100 FACTORY, model years 2021 to 2026. Check what the indicator will be mounted to before ordering. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Resistors or an LED relay are separate part numbers where the TUONO V4 1100 FACTORY needs them.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Test all functions with the ignition on before the first ride. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an E8-approved part, and we say so because it is unusual in this catalogue. The approval travels with the part; whether the fitted position is legal is a separate question. If the TUONO V4 1100 FACTORY carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899261378826,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_fb09b4bf-d346-477d-849d-149b0327fe96.png?v=1791896758"},{"product_id":"lightech-led-turn-signals-bmw-hp4-2013-2018-fre939ner","title":"LighTech LED Turn Signals BMW HP4 (2013-2018) – FRE939NER","description":"\u003cp\u003eThe indicators are the one part of an HP4 that is pure parts-bin. The LighTech FRE939NER is a pair of aluminium LED indicators, E8 approved, 128 g. It is meant to go onto a LighTech holder, not onto the original HP4 bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCovers the HP4 across 6 model years (2013 to 2018)\u003c\/li\u003e\n\u003cli\u003eListed for the BMW HP4\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of an HP4 is visible from behind. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Use the original cable runs where you can; they are already clear of the wheel. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe listing is the HP4, model years 2013 to 2018. Check what the indicator will be mounted to before ordering. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. The FRE939NER needs so little current that the flasher relay of the HP4 may not register it at all. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. No brackets are included — on the HP4 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. A component approval says nothing about where the part may sit on the motorcycle — that is national law. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262591242,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_e4262aa1-5eaa-4a85-b4df-77f4ca8460a7.png?v=1791896762"},{"product_id":"lightech-led-turn-signals-bmw-r-ninet-scrambler-2016-2024-fre939ner","title":"LighTech LED Turn Signals BMW R NINET SCRAMBLER (2016-2024) – FRE939NER","description":"\u003cp\u003eOn an R NINET SCRAMBLER the indicators are the cheapest visible thing to change. As an E8-approved aluminium pair LighTech lists the FRE939NER. LighTech intends it to be combined with its own plate holders on the R NINET SCRAMBLER.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of an R NINET SCRAMBLER. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Sold as a pair, so one order covers one end of the R NINET SCRAMBLER.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the R NINET SCRAMBLER, model years 2016 to 2024. Check what the indicator will be mounted to before ordering. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the R NINET SCRAMBLER. Whether the R NINET SCRAMBLER needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. If you are not comfortable with the wiring on the R NINET SCRAMBLER, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Use the original cable runs where you can; they are already clear of the wheel. The original parts go back on the R NINET SCRAMBLER at any time.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. No brackets are included — on the R NINET SCRAMBLER they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an E8-approved part, and we say so because it is unusual in this catalogue. What is approved is the component. How it is mounted on the R NINET SCRAMBLER is judged on its own. One call to your inspection body settles the position question for the R NINET SCRAMBLER.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262656778,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_0a1f238d-e911-448d-98ce-30a594ac0d8a.png?v=1791896766"},{"product_id":"lightech-led-turn-signals-bmw-s1000r-2014-2026-fre939ner","title":"LighTech LED Turn Signals BMW S1000R (2014-2026) – FRE939NER","description":"\u003cp\u003eThe rear of an S1000R is defined by what hangs off it. The LighTech FRE939NER is a pair of aluminium LED indicators, E8 approved, 128 g. The listing covers the S1000R across 13 model years (2014 to 2026).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the S1000R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. The FRE939NER is designed around LighTech's own tail tidies. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Route the cables so nothing is pinched when the suspension moves. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the S1000R, model years 2014 to 2026. It is the mount, not the model, that determines whether it bolts up. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. Whether the S1000R needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. It is a five-minute job for someone who knows the loom of the S1000R, and a long evening for someone who does not.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the LighTech range, the FRE939NER is a type-approved component: E8. What is approved is the component. How it is mounted on the S1000R is judged on its own. On a track-only machine the question does not arise.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262722314,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_85868178-7fa3-4735-8e89-afd48185660b.png?v=1791896770"},{"product_id":"lightech-led-turn-signals-bmw-s1000rr-2009-2026-fre939ner","title":"LighTech LED Turn Signals BMW S1000RR (2009-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on an S1000RR are sized for a crash test, not for the eye. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech pairs the FRE939NER with its own plate holders on the S1000RR. Sold as a pair, so one order covers one end of the S1000RR.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Test all functions with the ignition on before the first ride. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the S1000RR (2009 to 2026). It is the mount, not the model, that determines whether it bolts up. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eOne electrical point before you order the FRE939NER. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the S1000RR a load resistor or an LED relay restores normal behaviour. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. Component approval and roadworthiness of the finished installation are two different things. If the S1000RR carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262787850,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_ea673df1-4349-4a93-bef7-737b35d9245b.png?v=1791896774"},{"product_id":"lightech-led-turn-signals-cfmoto-nk-450-2023-2026-fre939ner","title":"LighTech LED Turn Signals CFMoto NK 450 (2023-2026) – FRE939NER","description":"\u003cp\u003eThe indicators are the one part of an NK 450 that is pure parts-bin. The FRE939NER is supplied as a pair and is approved under E8. LighTech intends it to be combined with its own plate holders on the NK 450.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsable at the front and at the rear of the NK 450\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eListed for the CFMoto NK 450\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. At 128 g the FRE939NER adds almost nothing where the original was bulky. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the CFMoto NK 450, 2023 to 2026. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. LighTech states that some motorcycles need a specific relay or resistor. An LED draws too little current for a standard flasher on the NK 450, which then blinks at double speed. The resistor kits are listed separately — tell us your NK 450 and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Route the cables so nothing is pinched when the suspension moves. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. Resistors or an LED relay are separate part numbers where the NK 450 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eLighTech has the FRE939NER approved under E8. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. Ask before you fit it to a registered NK 450 if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262853386,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_46304051-ddb0-4d0e-a231-7dc505c2a78c.png?v=1791896778"},{"product_id":"lightech-led-turn-signals-cfmoto-450-sr-2023-2026-fre939ner","title":"LighTech LED Turn Signals CFMoto 450 SR (2023-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on a 450 SR are sized for a crash test, not for the eye. The FRE939NER is supplied as a pair and is approved under E8. The listing covers the 450 SR across 4 model years (2023 to 2026).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eListed for the CFMoto 450 SR\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a 450 SR is visible from behind. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Sold as a pair, so one order covers one end of the 450 SR.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThe listing is the 450 SR, model years 2023 to 2026. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eOne electrical point before you order the FRE939NER. Whether the 450 SR needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. It is a five-minute job for someone who knows the loom of the 450 SR, and a long evening for someone who does not.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. The original parts go back on the 450 SR at any time.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Resistors or an LED relay are separate part numbers where the 450 SR needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. The approval travels with the part; whether the fitted position is legal is a separate question. Keep the documentation that comes with the part; an inspector may ask for it.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899262918922,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_05ed5e15-14dc-4b44-8b3b-5439dc441529.png?v=1791896782"},{"product_id":"lightech-led-turn-signals-cfmoto-650nk-2021-2024-fre939ner","title":"LighTech LED Turn Signals CFMoto 650NK (2021-2024) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a 650NK more than paint does. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. It is meant to go onto a LighTech holder, not onto the original 650NK bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsable at the front and at the rear of the 650NK\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eCovers the 650NK across 4 model years (2021 to 2024)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the 650NK (2021 to 2024). Check what the indicator will be mounted to before ordering. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the 650NK. If the 650NK monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. We can tell you before you order whether the 650NK is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech pairs the FRE939NER with its own plate holders on the 650NK. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Route the cables so nothing is pinched when the suspension moves. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. What is approved is the component. How it is mounted on the 650NK is judged on its own. Ask before you fit it to a registered 650NK if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263017226,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_a62deddc-0022-4b5a-b60d-91c9943b8c1b.png?v=1791896787"},{"product_id":"lightech-led-turn-signals-ducati-hypermotard-698-mono-2024-2026-fre939ner","title":"LighTech LED Turn Signals Ducati HYPERMOTARD 698 Mono (2024-2026) – FRE939NER","description":"\u003cp\u003eNothing dates a HYPERMOTARD 698 Mono faster than its original turn signals. As an E8-approved aluminium pair LighTech lists the FRE939NER. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eCovers the HYPERMOTARD 698 Mono across 3 model years (2024 to 2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati HYPERMOTARD 698 Mono. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. At 128 g the FRE939NER adds almost nothing where the original was bulky. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. A standard flasher is a load-dependent device. Fit the FRE939NER without compensating and the HYPERMOTARD 698 Mono will blink fast. If you are not comfortable with the wiring on the HYPERMOTARD 698 Mono, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Test all functions with the ignition on before the first ride. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThe E8 mark on the FRE939NER is a component approval granted in the EU. Component approval and roadworthiness of the finished installation are two different things. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263148298,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_fe01dd50-0d20-4ce3-b29c-c6e99a2e43c1.png?v=1791896793"},{"product_id":"lightech-led-turn-signals-ducati-hypermotard-821-2013-2018-fre939ner","title":"LighTech LED Turn Signals Ducati HYPERMOTARD 821 (2013-2018) – FRE939NER","description":"\u003cp\u003eOn a HYPERMOTARD 821 the indicators are the cheapest visible thing to change. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. The listing covers the HYPERMOTARD 821 across 6 model years (2013 to 2018).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the HYPERMOTARD 821\u003c\/li\u003e\n\u003cli\u003eCovers the HYPERMOTARD 821 across 6 model years (2013 to 2018)\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. The FRE939NER is designed around LighTech's own tail tidies. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. Some HYPERMOTARD 821 wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. It is a five-minute job for someone who knows the loom of the HYPERMOTARD 821, and a long evening for someone who does not.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eFitment is the HYPERMOTARD 821 across 2013 to 2018. Check what the indicator will be mounted to before ordering. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. We would rather you asked your inspection body than discovered it at the next test.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263213834,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_55f6c7a5-e909-4c14-81ce-0a788e4e2a48.png?v=1791896798"},{"product_id":"lightech-led-turn-signals-ducati-hypermotard-939-2016-2019-fre939ner","title":"LighTech LED Turn Signals Ducati HYPERMOTARD 939 (2016-2019) – FRE939NER","description":"\u003cp\u003eOn a HYPERMOTARD 939 the indicators are the cheapest visible thing to change. As an E8-approved aluminium pair LighTech lists the FRE939NER. The listing covers the HYPERMOTARD 939 across 4 model years (2016 to 2019).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eCovers the HYPERMOTARD 939 across 4 model years (2016 to 2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati HYPERMOTARD 939. On the HYPERMOTARD 939 it is intended to go onto a LighTech plate holder or an existing bracket. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a HYPERMOTARD 939 is visible from behind. LighTech pairs the FRE939NER with its own plate holders on the HYPERMOTARD 939. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the HYPERMOTARD 939 a load resistor or an LED relay restores normal behaviour. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Route the cables so nothing is pinched when the suspension moves. The original parts go back on the HYPERMOTARD 939 at any time.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Resistors or an LED relay are separate part numbers where the HYPERMOTARD 939 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. Mounting positions, minimum distances and visibility angles are not covered by the component approval. We would rather you asked your inspection body than discovered it at the next test.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263475978,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_0439ebd9-dcae-44e1-961a-a99cd89ad66c.png?v=1791896802"},{"product_id":"lightech-led-turn-signals-ducati-hypermotard-950-sp-2019-2025-fre939ner","title":"LighTech LED Turn Signals Ducati HYPERMOTARD 950 SP (2019-2025) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a HYPERMOTARD 950 SP more than paint does. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. LighTech intends it to be combined with its own plate holders on the HYPERMOTARD 950 SP.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsable at the front and at the rear of the HYPERMOTARD 950 SP\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. The FRE939NER is an E8-approved pair that can go on the front or the rear. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. If the HYPERMOTARD 950 SP monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati HYPERMOTARD 950 SP. Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Nothing on the HYPERMOTARD 950 SP is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an E8-approved part, and we say so because it is unusual in this catalogue. An approved indicator in the wrong position is still a fault at inspection. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263508746,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_ce587b59-155d-4dc6-92ca-91d15e4e126a.png?v=1791896808"},{"product_id":"lightech-led-turn-signals-ducati-hypermotard-950-2019-2025-fre939ner","title":"LighTech LED Turn Signals Ducati HYPERMOTARD 950 (2019-2025) – FRE939NER","description":"\u003cp\u003eFactory indicators on a HYPERMOTARD 950 are sized for a crash test, not for the eye. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. The listing covers the HYPERMOTARD 950 across 7 model years (2019 to 2025).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eCovers the HYPERMOTARD 950 across 7 model years (2019 to 2025)\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Seal the connections against water rather than relying on the plug alone. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a HYPERMOTARD 950 is visible from behind. LighTech pairs the FRE939NER with its own plate holders on the HYPERMOTARD 950. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThe listing is the HYPERMOTARD 950, model years 2019 to 2025. On the HYPERMOTARD 950 it is intended to go onto a LighTech plate holder or an existing bracket. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. The manufacturer's own words: for some motorcycles it may be necessary to use specific relays or resistors. The HYPERMOTARD 950 may be one of them. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eLighTech has the FRE939NER approved under E8. Component approval and roadworthiness of the finished installation are two different things. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263738122,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_6aa33a59-2766-40fc-bbe5-d77847226227.png?v=1791896812"},{"product_id":"lightech-led-turn-signals-ducati-monster-1200-r-2017-2021-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 1200 R (2017-2021) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a MONSTER 1200 R are big because they are cheap to make. As an E8-approved aluminium pair LighTech lists the FRE939NER. It is the cheapest way to change the look of the MONSTER 1200 R.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eListed for the Ducati MONSTER 1200 R\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MONSTER 1200 R\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MONSTER 1200 R is visible from behind. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Ducati MONSTER 1200 R, 2017 to 2021. Check what the indicator will be mounted to before ordering. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. If the MONSTER 1200 R monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. The resistor kits are listed separately — tell us your MONSTER 1200 R and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Use the original cable runs where you can; they are already clear of the wheel. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. No brackets are included — on the MONSTER 1200 R they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. An approved indicator in the wrong position is still a fault at inspection. For a road-registered MONSTER 1200 R, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263770890,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_1b140e4c-039f-4055-aaca-a9656c2e4a76.png?v=1791896816"},{"product_id":"lightech-led-turn-signals-ducati-monster-1200-s-2017-2021-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 1200 S (2017-2021) – FRE939NER","description":"\u003cp\u003eNothing dates a MONSTER 1200 S faster than its original turn signals. As an E8-approved aluminium pair LighTech lists the FRE939NER. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MONSTER 1200 S\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. The FRE939NER is designed around LighTech's own tail tidies. Sold as a pair, so one order covers one end of the MONSTER 1200 S.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati MONSTER 1200 S. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Some MONSTER 1200 S wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. We can tell you before you order whether the MONSTER 1200 S is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Route the cables so nothing is pinched when the suspension moves. Nothing on the MONSTER 1200 S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the LighTech range, the FRE939NER is a type-approved component: E8. The mark means the part may be sold and used; it does not pre-approve your installation. On a track-only machine the question does not arise.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263836426,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_8b41e92e-0490-4e80-b143-0c631333b9f3.png?v=1791896821"},{"product_id":"lightech-led-turn-signals-ducati-monster-1200-2017-2021-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 1200 (2017-2021) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a MONSTER 1200 more than paint does. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. The pair carries E8 type approval as a component.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati MONSTER 1200\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. A standard flasher is a load-dependent device. Fit the FRE939NER without compensating and the MONSTER 1200 will blink fast. If you are not comfortable with the wiring on the MONSTER 1200, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the MONSTER 1200 (2017 to 2021). It is the mount, not the model, that determines whether it bolts up. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a MONSTER 1200. The FRE939NER is designed around LighTech's own tail tidies. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Route the cables so nothing is pinched when the suspension moves. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the LighTech range, the FRE939NER is a type-approved component: E8. What is approved is the component. How it is mounted on the MONSTER 1200 is judged on its own. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263869194,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_41e3d73d-9a89-4f8d-87a1-257c546f6f4a.png?v=1791896827"},{"product_id":"lightech-led-turn-signals-ducati-monster-797-2017-2021-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 797 (2017-2021) – FRE939NER","description":"\u003cp\u003eOn a MONSTER 797 the indicators are the cheapest visible thing to change. The FRE939NER is supplied as a pair and is approved under E8. The listing covers the MONSTER 797 across 5 model years (2017 to 2021).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MONSTER 797\u003c\/li\u003e\n\u003cli\u003eCovers the MONSTER 797 across 5 model years (2017 to 2021)\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the MONSTER 797 LighTech recommends a specific relay or resistor in that case. It is a five-minute job for someone who knows the loom of the MONSTER 797, and a long evening for someone who does not.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MONSTER 797 is visible from behind. LighTech pairs the FRE939NER with its own plate holders on the MONSTER 797. Sold as a pair, so one order covers one end of the MONSTER 797.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the MONSTER 797, model years 2017 to 2021. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Test all functions with the ignition on before the first ride. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Resistors or an LED relay are separate part numbers where the MONSTER 797 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eLighTech has the FRE939NER approved under E8. The approval travels with the part; whether the fitted position is legal is a separate question. If the MONSTER 797 carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899263967498,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_b56e0ddf-cf59-472f-9ba5-b39682db8033.png?v=1791896833"},{"product_id":"lightech-led-turn-signals-ducati-monster-937-sp-2021-2025-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 937 SP (2021-2025) – FRE939NER","description":"\u003cp\u003eOn a MONSTER 937 SP the indicators are the cheapest visible thing to change. As an E8-approved aluminium pair LighTech lists the FRE939NER. LighTech intends it to be combined with its own plate holders on the MONSTER 937 SP.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MONSTER 937 SP\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati MONSTER 937 SP\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eOne electrical point before you order the FRE939NER. Some MONSTER 937 SP wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. We can tell you before you order whether the MONSTER 937 SP is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MONSTER 937 SP is visible from behind. LighTech pairs the FRE939NER with its own plate holders on the MONSTER 937 SP. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati MONSTER 937 SP. It is the mount, not the model, that determines whether it bolts up. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Seal the connections against water rather than relying on the plug alone. The original parts go back on the MONSTER 937 SP at any time.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. No brackets are included — on the MONSTER 937 SP they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eLighTech has the FRE939NER approved under E8. The mark means the part may be sold and used; it does not pre-approve your installation. For a road-registered MONSTER 937 SP, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264098570,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_35bb093d-5c7c-44fb-a117-f12cd66b4df2.png?v=1791896837"},{"product_id":"lightech-led-turn-signals-ducati-monster-937-2021-2025-fre939ner","title":"LighTech LED Turn Signals Ducati MONSTER 937 (2021-2025) – FRE939NER","description":"\u003cp\u003eOn a MONSTER 937 the indicators are the cheapest visible thing to change. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. LighTech intends it to be combined with its own plate holders on the MONSTER 937.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MONSTER 937\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati MONSTER 937\u003c\/li\u003e\n\u003cli\u003eCovers the MONSTER 937 across 5 model years (2021 to 2025)\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThe listing is the MONSTER 937, model years 2021 to 2025. Check what the indicator will be mounted to before ordering. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MONSTER 937 is visible from behind. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the MONSTER 937 a load resistor or an LED relay restores normal behaviour. We can tell you before you order whether the MONSTER 937 is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Seal the connections against water rather than relying on the plug alone. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. Resistors or an LED relay are separate part numbers where the MONSTER 937 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. An approved indicator in the wrong position is still a fault at inspection. One call to your inspection body settles the position question for the MONSTER 937.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264131338,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_b639b2cf-9307-41ee-9997-2098465edb5e.png?v=1791896841"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-1200-2007-2020-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA 1200 (2007-2020) – FRE939NER","description":"\u003cp\u003eNothing dates a MULTISTRADA 1200 faster than its original turn signals. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. It is the cheapest way to change the look of the MULTISTRADA 1200.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCovers the MULTISTRADA 1200 across 14 model years (2007 to 2020)\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MULTISTRADA 1200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. At 128 g the FRE939NER adds almost nothing where the original was bulky. Sold as a pair, so one order covers one end of the MULTISTRADA 1200.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the MULTISTRADA 1200. If the MULTISTRADA 1200 monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. LighTech's advice is to contact specialised personnel for the assembly of the FRE939NER.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Ducati MULTISTRADA 1200, 2007 to 2020. On the MULTISTRADA 1200 it is intended to go onto a LighTech plate holder or an existing bracket. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. No brackets are included — on the MULTISTRADA 1200 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Use the original cable runs where you can; they are already clear of the wheel. The original parts go back on the MULTISTRADA 1200 at any time.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. What is approved is the component. How it is mounted on the MULTISTRADA 1200 is judged on its own. On a track-only machine the question does not arise.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264524554,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_b78c5793-2ac8-43ec-a2f9-0eb247eec1a4.png?v=1791896846"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-v4-pikes-peak-2021-2026-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA V4 PIKES PEAK (2021-2026) – FRE939NER","description":"\u003cp\u003eThe indicators are the one part of a MULTISTRADA V4 PIKES PEAK that is pure parts-bin. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. It is meant to go onto a LighTech holder, not onto the original MULTISTRADA V4 PIKES PEAK bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MULTISTRADA V4 PIKES PEAK\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati MULTISTRADA V4 PIKES PEAK\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a MULTISTRADA V4 PIKES PEAK. LighTech builds the FRE939NER to sit on one of its holders. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Test all functions with the ignition on before the first ride. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe listing is the MULTISTRADA V4 PIKES PEAK, model years 2021 to 2026. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the MULTISTRADA V4 PIKES PEAK. If the MULTISTRADA V4 PIKES PEAK monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. We can tell you before you order whether the MULTISTRADA V4 PIKES PEAK is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. The approval travels with the part; whether the fitted position is legal is a separate question. We would rather you asked your inspection body than discovered it at the next test.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264557322,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_41528eca-ef61-4919-a912-841f7a333f93.png?v=1791896852"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-v4-rally-2023-2026-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA V4 RALLY (2023-2026) – FRE939NER","description":"\u003cp\u003eThe rear of a MULTISTRADA V4 RALLY is defined by what hangs off it. The FRE939NER is a universal pair — front or rear, 128 g. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati MULTISTRADA V4 RALLY\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MULTISTRADA V4 RALLY\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MULTISTRADA V4 RALLY is visible from behind. LighTech pairs the FRE939NER with its own plate holders on the MULTISTRADA V4 RALLY. Sold as a pair, so one order covers one end of the MULTISTRADA V4 RALLY.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe listing is the MULTISTRADA V4 RALLY, model years 2023 to 2026. Check what the indicator will be mounted to before ordering. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Some MULTISTRADA V4 RALLY wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Resistors or an LED relay are separate part numbers where the MULTISTRADA V4 RALLY needs them.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThe E8 mark on the FRE939NER is a component approval granted in the EU. Component approval and roadworthiness of the finished installation are two different things. One call to your inspection body settles the position question for the MULTISTRADA V4 RALLY.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264622858,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_0e126eb8-f47f-497f-9b45-879a5789dd04.png?v=1791896856"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-v4-rs-2021-2026-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA V4 RS (2021-2026) – FRE939NER","description":"\u003cp\u003eOn a MULTISTRADA V4 RS the indicators are the cheapest visible thing to change. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Route the cables so nothing is pinched when the suspension moves. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a MULTISTRADA V4 RS is visible from behind. The FRE939NER is designed around LighTech's own tail tidies. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Ducati MULTISTRADA V4 RS, 2021 to 2026. It is the mount, not the model, that determines whether it bolts up. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. Double-speed flashing after fitting the FRE939NER is not a fault in the part — it is the MULTISTRADA V4 RS reporting a lamp it can no longer measure. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. No brackets are included — on the MULTISTRADA V4 RS they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the LighTech range, the FRE939NER is a type-approved component: E8. The mark means the part may be sold and used; it does not pre-approve your installation. One call to your inspection body settles the position question for the MULTISTRADA V4 RS.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264655626,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_ff1a4adc-bc5c-4426-8874-64aa217790d9.png?v=1791896860"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-v4s-2021-2026-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA V4S (2021-2026) – FRE939NER","description":"\u003cp\u003eFactory indicators on a MULTISTRADA V4S are sized for a crash test, not for the eye. The FRE939NER is supplied as a pair and is approved under E8. The pair carries E8 type approval as a component.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the MULTISTRADA V4S\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. The manufacturer's own words: for some motorcycles it may be necessary to use specific relays or resistors. The MULTISTRADA V4S may be one of them. The resistor kits are listed separately — tell us your MULTISTRADA V4S and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. LighTech builds the FRE939NER to sit on one of its holders. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Ducati MULTISTRADA V4S, 2021 to 2026. On the MULTISTRADA V4S it is intended to go onto a LighTech plate holder or an existing bracket. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Nothing on the MULTISTRADA V4S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an E8-approved part, and we say so because it is unusual in this catalogue. The mark means the part may be sold and used; it does not pre-approve your installation. Keep the documentation that comes with the part; an inspector may ask for it.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899264786698,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_3b2ea5b6-bc8d-447a-a30c-a1b96ba51caa.png?v=1791896864"},{"product_id":"lightech-led-turn-signals-ducati-multistrada-v4-2021-2026-fre939ner","title":"LighTech LED Turn Signals Ducati MULTISTRADA V4 (2021-2026) – FRE939NER","description":"\u003cp\u003eThe indicators are the one part of a MULTISTRADA V4 that is pure parts-bin. LighTech's FRE939NER is a pair of machined aluminium turn signals carrying E8 approval. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a MULTISTRADA V4. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Whether the MULTISTRADA V4 needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. We can tell you before you order whether the MULTISTRADA V4 is one of the machines that needs compensation.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe listing is the MULTISTRADA V4, model years 2021 to 2026. Check what the indicator will be mounted to before ordering. The part number FRE939NER is the binding reference, not the model name.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. No brackets are included — on the MULTISTRADA V4 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Route the cables so nothing is pinched when the suspension moves. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. Ask before you fit it to a registered MULTISTRADA V4 if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265048842,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_72c86025-3e11-4d41-827d-08eb590c6802.png?v=1791896868"},{"product_id":"lightech-led-turn-signals-ducati-panigale-1199-2012-2017-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale 1199 (2012-2017) – FRE939NER","description":"\u003cp\u003eThe rear of a Panigale 1199 is defined by what hangs off it. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati Panigale 1199\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eCovers the Panigale 1199 across 6 model years (2012 to 2017)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a Panigale 1199. The FRE939NER is designed around LighTech's own tail tidies. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati Panigale 1199. Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the Panigale 1199 a load resistor or an LED relay restores normal behaviour. LighTech's advice is to contact specialised personnel for the assembly of the FRE939NER.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Use the original cable runs where you can; they are already clear of the wheel. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Resistors or an LED relay are separate part numbers where the Panigale 1199 needs them.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. Component approval and roadworthiness of the finished installation are two different things. Keep the documentation that comes with the part; an inspector may ask for it.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265114378,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_c36f749d-625c-4e8f-b99e-638cd4c50eee.png?v=1791896872"},{"product_id":"lightech-led-turn-signals-ducati-panigale-1299-2012-2018-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale 1299 (2012-2018) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a Panigale 1299 are big because they are cheap to make. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. LighTech lists it for the Panigale 1299.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the Panigale 1299\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eCovers the Panigale 1299 across 7 model years (2012 to 2018)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Test all functions with the ignition on before the first ride. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati Panigale 1299. It is the mount, not the model, that determines whether it bolts up. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. LighTech states that some motorcycles need a specific relay or resistor. An LED draws too little current for a standard flasher on the Panigale 1299, which then blinks at double speed. Ask us whether your Panigale 1299 is known to need a resistor; we would rather check than guess.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. An approved indicator in the wrong position is still a fault at inspection. One call to your inspection body settles the position question for the Panigale 1299.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265179914,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_0c602f32-6da4-45b2-adce-473b474efbf9.png?v=1791896876"},{"product_id":"lightech-led-turn-signals-ducati-panigale-899-2012-2017-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale 899 (2012-2017) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a Panigale 899 are big because they are cheap to make. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. The listing covers the Panigale 899 across 6 model years (2012 to 2017).\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati Panigale 899\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the Panigale 899\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Use the original cable runs where you can; they are already clear of the wheel. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech pairs the FRE939NER with its own plate holders on the Panigale 899. Sold as a pair, so one order covers one end of the Panigale 899.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati Panigale 899. It is the mount, not the model, that determines whether it bolts up. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Some Panigale 899 wiring looms expect a bulb-sized load; where that is the case, the FRE939NER needs a resistor or an LED relay alongside it. If you are not comfortable with the wiring on the Panigale 899, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. No brackets are included — on the Panigale 899 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. The mark means the part may be sold and used; it does not pre-approve your installation. One call to your inspection body settles the position question for the Panigale 899.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265376522,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_89a1a542-1ac2-40d4-a8c1-7514ac1afed2.png?v=1791896880"},{"product_id":"lightech-led-turn-signals-ducati-panigale-959-2016-2020-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale 959 (2016-2020) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a Panigale 959 are big because they are cheap to make. LighTech's FRE939NER is a pair of machined aluminium turn signals carrying E8 approval. LighTech lists it for the Panigale 959.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the Panigale 959\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a Panigale 959. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eOne electrical point before you order the FRE939NER. The manufacturer's own words: for some motorcycles it may be necessary to use specific relays or resistors. The Panigale 959 may be one of them. If you are not comfortable with the wiring on the Panigale 959, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the Panigale 959 (2016 to 2020). On the Panigale 959 it is intended to go onto a LighTech plate holder or an existing bracket. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. No brackets are included — on the Panigale 959 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Use the original cable runs where you can; they are already clear of the wheel. Check it again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. Component approval and roadworthiness of the finished installation are two different things. One call to your inspection body settles the position question for the Panigale 959.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265442058,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_aadf088e-b360-4bed-a1f4-633746067caa.png?v=1791896886"},{"product_id":"lightech-led-turn-signals-ducati-panigale-v2-s-890-2025-2026-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale V2 S 890 (2025-2026) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a Panigale V2 S 890 are big because they are cheap to make. The FRE939NER is supplied as a pair and is approved under E8. It is meant to go onto a LighTech holder, not onto the original Panigale V2 S 890 bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati Panigale V2 S 890\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the Panigale V2 S 890. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the Panigale V2 S 890 LighTech recommends a specific relay or resistor in that case. LighTech recommends having the installation done by specialists, and we pass that on rather than play it down.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. LighTech builds the FRE939NER to sit on one of its holders. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the Panigale V2 S 890 (2025 to 2026). On the Panigale V2 S 890 it is intended to go onto a LighTech plate holder or an existing bracket. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Test all functions with the ignition on before the first ride. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. Component approval and roadworthiness of the finished installation are two different things. For a road-registered Panigale V2 S 890, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265507594,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_80a25866-7e4e-4b5a-969e-8ea394f0faa9.png?v=1791896890"},{"product_id":"lightech-led-turn-signals-ducati-panigale-v4-r-2018-2026-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale V4 R (2018-2026) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a Panigale V4 R more than paint does. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. LighTech lists it for the Panigale V4 R.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the Panigale V4 R\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. LighTech states that some motorcycles need a specific relay or resistor. An LED draws too little current for a standard flasher on the Panigale V4 R, which then blinks at double speed. The resistor kits are listed separately — tell us your Panigale V4 R and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eChanging the indicators is the cheapest visible change there is. LighTech pairs the FRE939NER with its own plate holders on the Panigale V4 R. Sold as a pair, so one order covers one end of the Panigale V4 R.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the Panigale V4 R (2018 to 2026). Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Use the original cable runs where you can; they are already clear of the wheel. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. No brackets are included — on the Panigale V4 R they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eE8 approval applies to the FRE939NER itself. The approval travels with the part; whether the fitted position is legal is a separate question. For a road-registered Panigale V4 R, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899265573130,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_50e1bac1-a67d-4f67-8ab8-435234669b2b.png?v=1791896893"},{"product_id":"lightech-led-turn-signals-ducati-panigale-v4-s-2018-2026-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale V4 S (2018-2026) – FRE939NER","description":"\u003cp\u003eThe rear of a Panigale V4 S is defined by what hangs off it. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eCovers the Panigale V4 S across 9 model years (2018 to 2026)\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a Panigale V4 S. LighTech builds the FRE939NER to sit on one of its holders. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the Panigale V4 S (2018 to 2026). The indicator itself is universal; what decides the fit is the bracket or holder it goes on. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Seal the connections against water rather than relying on the plug alone. Nothing on the Panigale V4 S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eThere is a detail to settle before the FRE939NER goes on the Panigale V4 S. LighTech states that some motorcycles need a specific relay or resistor. An LED draws too little current for a standard flasher on the Panigale V4 S, which then blinks at double speed. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. What is approved is the component. How it is mounted on the Panigale V4 S is judged on its own. We would rather you asked your inspection body than discovered it at the next test.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899266064650,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_c57a98db-5b78-40a5-a7bb-f8c967b148d3.png?v=1791896898"},{"product_id":"lightech-led-turn-signals-ducati-panigale-v4-2018-2026-fre939ner","title":"LighTech LED Turn Signals Ducati Panigale V4 (2018-2026) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a Panigale V4 are big because they are cheap to make. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCovers the Panigale V4 across 9 model years (2018 to 2026)\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the Panigale V4\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati Panigale V4\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eLighTech catalogues the FRE939NER for the Panigale V4 (2018 to 2026). It is the mount, not the model, that determines whether it bolts up. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the Panigale V4 LighTech recommends a specific relay or resistor in that case. Ask us whether your Panigale V4 is known to need a resistor; we would rather check than guess.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a Panigale V4. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. A stock item rather than a special order.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Seal the connections against water rather than relying on the plug alone. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. What is approved is the component. How it is mounted on the Panigale V4 is judged on its own. One call to your inspection body settles the position question for the Panigale V4.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899266130186,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_7be19115-ae35-4cd8-822b-2e2e6b474b9a.png?v=1791896902"},{"product_id":"lightech-led-turn-signals-ducati-streetfighter-848-2008-2016-fre939ner","title":"LighTech LED Turn Signals Ducati STREETFIGHTER 848 (2008-2016) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a STREETFIGHTER 848 are big because they are cheap to make. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eMachined aluminium housing\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati STREETFIGHTER 848. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a STREETFIGHTER 848. LighTech pairs the FRE939NER with its own plate holders on the STREETFIGHTER 848. Sold as a pair, so one order covers one end of the STREETFIGHTER 848.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. LEDs draw a fraction of what a bulb does, so the flasher on some bikes speeds up. For the STREETFIGHTER 848 LighTech recommends a specific relay or resistor in that case. The resistor kits are listed separately — tell us your STREETFIGHTER 848 and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Seal the connections against water rather than relying on the plug alone. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. No brackets are included — on the STREETFIGHTER 848 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eE8 is what the FRE939NER is approved under. The mark means the part may be sold and used; it does not pre-approve your installation. On a track-only machine the question does not arise.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899266490634,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_15b97f61-8f4f-4d94-ba72-064268df79e7.png?v=1791896906"},{"product_id":"lightech-led-turn-signals-ducati-streetfighter-v2-s-890-2021-2026-fre939ner","title":"LighTech LED Turn Signals Ducati STREETFIGHTER V2 S 890 (2021-2026) – FRE939NER","description":"\u003cp\u003eA pair of small LED arrows changes the back of a STREETFIGHTER V2 S 890 more than paint does. The FRE939NER is a universal pair — front or rear, 128 g. It is meant to go onto a LighTech holder, not onto the original STREETFIGHTER V2 S 890 bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati STREETFIGHTER V2 S 890\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eCovers the STREETFIGHTER V2 S 890 across 6 model years (2021 to 2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a STREETFIGHTER V2 S 890. LighTech machines the FRE939NER from aluminium and has the pair approved under E8. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Route the cables so nothing is pinched when the suspension moves. Removal takes as long as fitting did.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eThis listing covers the Ducati STREETFIGHTER V2 S 890, 2021 to 2026. Check what the indicator will be mounted to before ordering. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eA word on the electrics of the FRE939NER. Whether the STREETFIGHTER V2 S 890 needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Resistors or an LED relay are separate part numbers where the STREETFIGHTER V2 S 890 needs them.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. Mounting positions, minimum distances and visibility angles are not covered by the component approval. For a road-registered STREETFIGHTER V2 S 890, have the fitted position assessed if you are unsure.\u003c\/p\u003e\n\u003ch2\u003eThe Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899266720010,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_496a5b23-7cb6-4474-be51-e4770a57e539.png?v=1791896910"},{"product_id":"lightech-led-turn-signals-ducati-streetfighter-v4s-2020-2026-fre939ner","title":"LighTech LED Turn Signals Ducati STREETFIGHTER V4S (2020-2026) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a STREETFIGHTER V4S are big because they are cheap to make. LighTech builds the FRE939NER in aluminium and has the pair E8 approved. LighTech designs these arrows around its own tail tidies.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati STREETFIGHTER V4S\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the STREETFIGHTER V4S\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. LighTech pairs the FRE939NER with its own plate holders on the STREETFIGHTER V4S. Sold as a pair, so one order covers one end of the STREETFIGHTER V4S.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. Double-speed flashing after fitting the FRE939NER is not a fault in the part — it is the STREETFIGHTER V4S reporting a lamp it can no longer measure. The resistor kits are listed separately — tell us your STREETFIGHTER V4S and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eFitment is the STREETFIGHTER V4S across 2020 to 2026. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. Have FRE939NER and the model year to hand and the question is settled in one message.\u003c\/p\u003e\n\u003ch2\u003eSupplied As\u003c\/h2\u003e\n\u003cp\u003eLighTech ships the FRE939NER as a pair, not singly. Resistors or an LED relay are separate part numbers where the STREETFIGHTER V4S needs them.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER needs a mounting point and two wires. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Nothing on the STREETFIGHTER V4S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. Mounting positions, minimum distances and visibility angles are not covered by the component approval. One call to your inspection body settles the position question for the STREETFIGHTER V4S.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899267047690,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_1ec1cccb-aec7-4353-9256-e88424724648.png?v=1791896914"},{"product_id":"lightech-led-turn-signals-ducati-streetfighter-v4-2020-2026-fre939ner","title":"LighTech LED Turn Signals Ducati STREETFIGHTER V4 (2020-2026) – FRE939NER","description":"\u003cp\u003eOriginal indicators on a STREETFIGHTER V4 are big because they are cheap to make. The FRE939NER is a universal pair — front or rear, 128 g. It is meant to go onto a LighTech holder, not onto the original STREETFIGHTER V4 bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eCovers the STREETFIGHTER V4 across 7 model years (2020 to 2026)\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the STREETFIGHTER V4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati STREETFIGHTER V4. It is the mount, not the model, that determines whether it bolts up. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a STREETFIGHTER V4 is visible from behind. At 128 g the FRE939NER adds almost nothing where the original was bulky. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order: Resistors\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is an LED unit, and that has a consequence. The FRE939NER needs so little current that the flasher relay of the STREETFIGHTER V4 may not register it at all. The resistor kits are listed separately — tell us your STREETFIGHTER V4 and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Use the original cable runs where you can; they are already clear of the wheel. The original parts go back on the STREETFIGHTER V4 at any time.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. No brackets are included — on the STREETFIGHTER V4 they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. Mounting positions, minimum distances and visibility angles are not covered by the component approval. If the STREETFIGHTER V4 carries a plate, check the mounting position against the national rules.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899267277066,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_7d18bc31-3eed-4485-9043-ce1f6a57addf.png?v=1791896918"},{"product_id":"lightech-led-turn-signals-ducati-supersport-939-s-2017-2020-fre939ner","title":"LighTech LED Turn Signals Ducati SUPERSPORT 939 S (2017-2020) – FRE939NER","description":"\u003cp\u003eThe rear of a SUPERSPORT 939 S is defined by what hangs off it. Enter the FRE939NER: aluminium LED indicators, usable at the front or the rear. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the SUPERSPORT 939 S\u003c\/li\u003e\n\u003cli\u003eA universal pair — the fit depends on the mount, not on the model\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Use the original cable runs where you can; they are already clear of the wheel. Nothing on the SUPERSPORT 939 S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eWhat the Original Costs You\u003c\/h2\u003e\n\u003cp\u003eEverything that hangs off the tail of a SUPERSPORT 939 S is visible from behind. At 128 g the FRE939NER adds almost nothing where the original was bulky. Sold as a pair, so one order covers one end of the SUPERSPORT 939 S.\u003c\/p\u003e\n\u003ch2\u003eWhat It Fits\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati SUPERSPORT 939 S. On the SUPERSPORT 939 S it is intended to go onto a LighTech plate holder or an existing bracket. The data comes from LighTech; the final check happens on the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLighTech says this plainly, and so do we. On many machines the indicator circuit reads the low LED current as a failed bulb and flashes fast. On the SUPERSPORT 939 S a load resistor or an LED relay restores normal behaviour. If you are not comfortable with the wiring on the SUPERSPORT 939 S, have it fitted — LighTech says the same.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. A second pair is needed if you are changing front and rear.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. What is approved is the component. How it is mounted on the SUPERSPORT 939 S is judged on its own. The approval helps you; it does not replace a sensible installation.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899267604746,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_6e42ec30-6cfb-43c1-8db3-82de9d3903c3.png?v=1791896922"},{"product_id":"lightech-led-turn-signals-ducati-supersport-939-2017-2020-fre939ner","title":"LighTech LED Turn Signals Ducati SUPERSPORT 939 (2017-2020) – FRE939NER","description":"\u003cp\u003eOn a SUPERSPORT 939 the indicators are the cheapest visible thing to change. The LighTech FRE939NER is a pair of aluminium LED indicators, E8 approved, 128 g. It is meant to go onto a LighTech holder, not onto the original SUPERSPORT 939 bracket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eLighTech part number FRE939NER\u003c\/li\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe listing is the SUPERSPORT 939, model years 2017 to 2020. The indicator itself is universal; what decides the fit is the bracket or holder it goes on. If in doubt, compare with the part on the bike rather than with the catalogue line.\u003c\/p\u003e\n\u003ch2\u003eWhy Change the Indicators\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a SUPERSPORT 939. LighTech pairs the FRE939NER with its own plate holders on the SUPERSPORT 939. E8 is a component approval; where and how they are fitted is a separate question.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. If the SUPERSPORT 939 monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. Order the FRE939NER together with a resistor kit if you would rather not find out the hard way.\u003c\/p\u003e\n\u003ch2\u003eIn the Workshop\u003c\/h2\u003e\n\u003cp\u003eInstallation is wiring work rather than mechanical work. Seal the connections against water rather than relying on the plug alone. The original parts go back on the SUPERSPORT 939 at any time.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eTwo indicators per box. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eType Approval\u003c\/h2\u003e\n\u003cp\u003eThere is a real approval behind the FRE939NER: E8. Mounting positions, minimum distances and visibility angles are not covered by the component approval. One call to your inspection body settles the position question for the SUPERSPORT 939.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899267834122,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_c175d815-766e-4c82-a96f-8ad9b2870c02.png?v=1791896927"},{"product_id":"lightech-led-turn-signals-ducati-supersport-950-s-2021-2024-fre939ner","title":"LighTech LED Turn Signals Ducati SUPERSPORT 950 S (2021-2024) – FRE939NER","description":"\u003cp\u003eThe indicators are the one part of a SUPERSPORT 950 S that is pure parts-bin. That is what the FRE939NER answers: two E8-approved LED arrows in aluminium. It is a stock LighTech item.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e100 % Made in Italy\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003cli\u003eCovers the SUPERSPORT 950 S across 4 model years (2021 to 2024)\u003c\/li\u003e\n\u003cli\u003eA stock LighTech item\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eMay need a load resistor or an LED flasher relay — see the note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eAn indicator is a legal requirement and a styling decision at the same time. The FRE939NER is designed around LighTech's own tail tidies. Sold as a pair, so one order covers one end of the SUPERSPORT 950 S.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe listing is the SUPERSPORT 950 S, model years 2021 to 2024. On the SUPERSPORT 950 S it is intended to go onto a LighTech plate holder or an existing bracket. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eLEDs and Your Flasher\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. Whether the SUPERSPORT 950 S needs a resistor depends on its indicator circuit, not on the FRE939NER. Many modern machines watch the load. The resistor kits are listed separately — tell us your SUPERSPORT 950 S and we will say whether one is needed.\u003c\/p\u003e\n\u003ch2\u003eWiring and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER goes on with the ignition off and the battery disconnected. Check the polarity before you close everything up — an indicator wired the wrong way round does not light. Nothing on the SUPERSPORT 950 S is altered permanently.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER is supplied as a pair. No brackets are included — on the SUPERSPORT 950 S they go onto an existing mount or a LighTech holder.\u003c\/p\u003e\n\u003ch2\u003eApproval\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. That covers the part, not the installation. Position, spacing and visibility angles are regulated separately and nationally. One call to your inspection body settles the position question for the SUPERSPORT 950 S.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899268129034,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_963de846-5b09-4bc0-98d6-2a3b85f0b14f.png?v=1791896930"},{"product_id":"lightech-led-turn-signals-ducati-supersport-950-2021-2024-fre939ner","title":"LighTech LED Turn Signals Ducati SUPERSPORT 950 (2021-2024) – FRE939NER","description":"\u003cp\u003eOn a SUPERSPORT 950 the indicators are the cheapest visible thing to change. The FRE939NER is a universal pair — front or rear, 128 g. LighTech lists it for the SUPERSPORT 950.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE8 type approval for the indicator pair\u003c\/li\u003e\n\u003cli\u003e128 g\u003c\/li\u003e\n\u003cli\u003eDesigned to be combined with LighTech licence plate holders\u003c\/li\u003e\n\u003cli\u003eListed for the Ducati SUPERSPORT 950\u003c\/li\u003e\n\u003cli\u003eUsable at the front and at the rear of the SUPERSPORT 950\u003c\/li\u003e\n\u003cli\u003eLED technology, so the current draw is a fraction of a bulb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFitting the FRE939NER is a two-wire connection per side. Use the original cable runs where you can; they are already clear of the wheel. Inspect the wiring at every service.\u003c\/p\u003e\n\u003ch2\u003eThe Cheapest Visible Change\u003c\/h2\u003e\n\u003cp\u003eThe original indicators are sized for a crash test, not for the look of a SUPERSPORT 950. LighTech builds the FRE939NER to sit on one of its holders. Made in Italy, like the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the FRE939NER for the Ducati SUPERSPORT 950. On the SUPERSPORT 950 it is intended to go onto a LighTech plate holder or an existing bracket. Ask before ordering if anything is unclear — it is quickly answered.\u003c\/p\u003e\n\u003ch2\u003eOne Electrical Point\u003c\/h2\u003e\n\u003cp\u003eLED indicators bring one complication with them. If the SUPERSPORT 950 monitors its indicator circuit, it will read the FRE939NER as a blown bulb until the load is made up. LighTech's advice is to contact specialised personnel for the assembly of the FRE939NER.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\n\u003cp\u003eOne pair per order. Two indicators and their fixings; nothing electrical beyond that.\u003c\/p\u003e\n\u003ch2\u003eWhat the Approval Covers\u003c\/h2\u003e\n\u003cp\u003eThe FRE939NER carries E8 type approval, which is a European component approval. The approval travels with the part; whether the fitted position is legal is a separate question. Ask before you fit it to a registered SUPERSPORT 950 if the position is unconventional.\u003c\/p\u003e\n\u003ch2\u003eAt a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: FRE939NER\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: LED turn signals, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eApproval\u003c\/em\u003e: E8 component type approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial\u003c\/em\u003e: Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front or rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied as\u003c\/em\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eNote\u003c\/em\u003e: May require a load resistor or LED relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish\u003c\/em\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 128 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53899268423946,"sku":"FRE939NER","price":55.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_FRE939NER_1_d37841_11030384-5a2f-46cd-8b15-a34ad3a4550c.png?v=1791896934"}],"url":"https:\/\/inter-pace.com\/en-np\/collections\/indicators.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}