Suomy Track-1 Full-Face Helmet Matte Red – Sam Lowes Replica 2025 (K6T10020)
Prices for Namibia exclude tax · Shipping calculated at checkout
Outside the EU — customs duties and import taxes may apply.
Questions? Just reach out — our team will help you right away.
Size chart Suomy Track-1/S1-XR GP/SR-GP Evo/TX-Pro
| Size | Head circumference (cm) | Head circumference (inch) |
|---|---|---|
| XS | 53–54 cm | 20.9–21.3 in |
| S | 55–56 cm | 21.7–22.0 in |
| M | 57–58 cm | 22.4–22.8 in |
| L | 59–60 cm | 23.2–23.6 in |
| XL | 61–62 cm | 24.0–24.4 in |
| XXL | 63–64 cm | 24.8–25.2 in |
How to measure your helmet size correctly: To find the right helmet size, measure your head circumference with a flexible tape measure.
It is important that the tape measure runs around the widest part of the head – only then will you get a correct result.
Place the tape measure at the front, about 1–2 cm above the eyebrows, and run it along the sides above the ears.
At the back, the tape must run over the largest part of the back of the head (not too low on the neck). The tape may run slightly at an angle – what matters is that it sits all the way around the largest points of the head.
Make sure the tape measure sits snugly but does not dig in. Measure 2–3 times for the most accurate result. You can then compare the measured value in centimetres (cm) with our size chart.
Tips for an accurate result
- Keep hair flat (e.g. do not measure over a voluminous hairstyle)
- Keep the tape horizontal, i.e. along the largest circumference
- Do not measure too loosely
- For values between two sizes:
→ usually choose the larger size (depending on helmet model / fit)
Important note on fit
The right helmet should fit firmly without causing uncomfortable pressure points.
A new helmet may feel a little tighter at first, as the inner lining adapts slightly over time.
- Worldwide shipping
- Genuine parts & verified quality
- Personal email support
- 14-day returns — in stock ships within 24h
Shipping & Returns
We ship with DHL and FedEx — express on request. If an item is in stock, express delivery can often go out within 1 business day. Standard delivery takes about 2–5 business days domestically and usually around a week worldwide. Please check the available shipping options and delivery times in your cart, as we offer several carriers depending on the country.
Returns must be registered in advance by email and are possible in line with our cancellation policy (14-day return request + 14-day return window after approval). Please note: unregistered returns are not accepted. You'll find all details on conditions, exceptions and refunds in our cancellation policy.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details and have no access to your credit card information.
Wearing a helmet all day demands more than good looks — it demands a fit that stays comfortable mile after mile. The Suomy Track-1 Sam Lowes Replica 2025 in matte red answers that call with its Hydrocool interior lining, intercom-ready cheek pads and glasses-friendly inner geometry, wrapping you in the same race-derived comfort that Sam Lowes relies on in Moto2. This is the helmet for riders who refuse to choose between genuine performance and genuine style.
Key Features
- Tricarboco shell — a tri-fibre blend of carbon, aramid and fibreglass for exceptional impact resistance at approximately 1,350 g ±50 g in just two shell sizes (M and L)
- Hydrocool interior lining — breathable, moisture-wicking, fully removable and washable, with intercom-compatible cheek pads and an emergency quick-release system
- Panoramic 210° horizontal by 90° vertical visor field in optical class 1, with tool-free quick-change mechanism and lateral visor lock
- Pinlock MaxVision 70 insert included as standard — fog-free vision in all conditions across a wide, frameless viewing area
- Wind-tunnel-refined aerodynamic shell profile: reduced turbulence, high stability in a racing tuck, and minimal neck fatigue at speed
- Double-D-ring closure for race-homologated, millimetre-precise chinstrap adjustment — the choice of every serious circuit rider
All-Day Comfort by Design
The Tricarboco shell is moulded in two sizes to ensure the helmet sits correctly on every head — a detail that directly affects long-ride comfort and safety. Inside, the Hydrocool lining actively draws heat and moisture away from the skin, so the interior stays fresh whether you are threading through summer traffic or setting lap times. The cheek pads are shaped to accept intercom speakers without pressure points, and the inner geometry gives glasses wearers the room they need. When the ride is over, the entire liner pulls out for a machine wash.
Aerodynamics and Visibility
Suomy developed the Track-1 shell profile in a wind tunnel, producing an aggressively tapered form that generates minimal lift and turbulence at motorway and track speeds. Stability in a full racing crouch is a measurable advantage, and the low neck load means less fatigue on a long trackday. Vision matches the ambition: the panoramic polycarbonate visor spans 210° horizontally and 90° vertically, optically clear to class 1 standard, with a variable thickness of 2–3.5 mm for distortion-free optics through every lean angle. Tool-free removal and a side lock mechanism mean visor changes take seconds in the pits.
Ventilation
Three front air intakes feed a channelled EPS ventilation path that drives fresh air across the interior and exhausts warm air through a rear outlet. The result is noticeably lower heat build-up during hard riding — the kind of ventilation that keeps your focus sharp on a hot summer trackday or a sustained motorway run.
Sam Lowes Replica 2025 — Official Design
The K6T10020 is an officially licensed replica of Sam Lowes's 2025 Moto2 lid, finished in his characteristic matte red with all the distinctive Lowes graphic elements. The matte finish resists fingerprints and minor scratches while giving the helmet a purposeful, race-ready appearance that stands apart from standard gloss replica designs.
Size Guide
| Size | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| Head circumference (cm) | 53–54 | 55–56 | 57–58 | 59–60 | 61–62 | 63 |
Sport helmets should fit snugly and evenly all around — if in doubt, size down rather than up and allow a short break-in period for the liner to conform to your head shape.
Fitment & Compatibility
The Suomy Track-1 is a universal full-face helmet suitable for road riding, motorway touring and trackdays. It is not vehicle-specific and fits any rider whose head circumference falls within the size range above. Compatible with Suomy visor accessories and Pinlock 70 MaxVision inserts.
Specifications
- Brand: Suomy
- Model: Track-1 Sam Lowes Replica 2025
- Part number: K6T10020
- Shell construction: Tricarboco (carbon, aramid, fibreglass)
- Weight: approx. 1,350 g ±50 g
- Shell sizes: 2 (M and L)
- Visor field: 210° horizontal, 90° vertical
- Visor optical class: 1
- Visor thickness: 2–3.5 mm (variable)
- Pinlock: MaxVision 70 (included)
- Ventilation: 3 front intakes, channelled EPS, rear exhaust outlet
- Lining: Hydrocool, removable and washable
- Closure: Double-D-ring
- Colour: matte red (Sam Lowes Replica 2025)
- Sizes available: XS, S, M, L, XL, XXL
| Brand | Suomy |
|---|---|
| Model | Track-1 Sam Lowes Replica 2025 |
| Part Number | K6T10020 |
| Shell Construction | Tricarboco (carbon, aramid, fibreglass) |
| Weight | approx. 1,350 g ±50 g |
| Shell Sizes | 2 (M and L) |
| Visor Field | 210° horizontal, 90° vertical |
| Visor Optical Class | 1 |
| Pinlock | MaxVision 70 (included as standard) |
| Closure | Double-D-ring |
Fitment data coming soon.
No reviews yet.
Build your kit
Gear up your Track-1.
Add the parts made for this helmet — your total updates live.
helmet only
Your helmet is always included · one Pinlock comes free · pick your size in the buy box above
// Suomy
Suomy Track-1 Full-Face Helmet Matte Red – Sam Lowes Replica 2025 (K6T10020)
Tech specs
- Brand
- Suomy
- Model
- Track-1 Sam Lowes Replica 2025
- Part Number
- K6T10020
- Shell Construction
- Tricarboco (carbon, aramid, fibreglass)
- Weight
- approx. 1,350 g ±50 g
- Shell Sizes
- 2 (M and L)
- Visor Field
- 210° horizontal, 90° vertical
- Visor Optical Class
- 1
- Pinlock
- MaxVision 70 (included as standard)
- Closure
- Double-D-ring
// Support
Frequently asked questions
Shipping & delivery
Estimate your shipping
Get the real shipping cost for this item to your address — the same rates as checkout.