Accossato brake lever EDF022 with black blade and black hub for BMW S1000RR (2009–2019)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC brake lever for the original BMW mounting
Part numberEDF022
FunctionFront brake lever, right hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentBMW S1000RR (2009–2019)
Road approvalNone documented, track use only
DescriptionThe whole story▼

A brake lever is measured in two directions: how far it stands off the grip, and how far it runs along your fingers. On the BMW S1000RR, the Accossato EDF022 lets you decide both. The distance to the grip is adjustable on the lever itself, and the blade is made in a short, a standard and a long version. It is machined from aluminium in Accossato's plant outside Turin and mounts on the original BMW master cylinder of the RR, listed by Accossato for the 2009 to 2019 model years.

Key Features

  • Replaces the original front brake lever and mounts on the BMW master cylinder
  • Distance to the grip adjustable on the lever
  • Three blade lengths: short, standard at about 138 mm, and long
  • Machined from solid aluminium and anodised
  • Black hub with the blade in one of seven colours
  • Fixed blade without a folding joint
  • Delivered in its own Accossato box
  • No German ABE documented, sold for track use

Construction and Material Quality

Accossato cuts the EDF022 from a solid aluminium blank on CNC machines instead of casting it, which is why the edges are crisp and the section stays even from the pivot to the tip. The hub, which carries the pivot bore and the adjuster, is always anodised black. Only the blade takes the colour you choose, so the part sitting next to the master cylinder and the switch housing stays unobtrusive while the colour is out where you see it. There is no hinge in the blade: the EDF022 is a fixed lever, one piece from hub to tip, with no joint that could develop play over the seasons.

Choosing the Length

The three lengths change how the lever works, not only how it looks. A short blade is made for braking with two fingers while the other two stay wrapped around the throttle; because it ends early, it cannot trap the ring and little finger against the grip at full pull. The standard blade is the closest match to the original BMW part and the natural choice for mixed road riding. The long blade leaves room for four fingers and gives more leverage at the tip, which suits riders who make a hard stop with the whole hand. For an S1000RR that spends most of its time on circuits, short is the usual pick; for the road, standard is the safe one. Not every colour is made in every length: black and red exist only as standard levers.

Setting the Reach

The adjuster sits close to the pivot, so the blade can be brought in for smaller hands or moved out for thicker gloves. Set it in your normal riding gloves with the bike upright: the lever should meet your fingers at the first joint without the wrist bending down. After fitting, make sure the brake light comes on as soon as the lever moves and that there is a little free travel before the pads bite, as you would after any lever change.

Fitment and Compatibility

Accossato lists the EDF022 for the S1000RR from 2009 to 2019. That covers the first RR of 2009 to 2014 and the revised version from 2015. The 2019 model year also introduced the completely new RR, so for a 2019 bike compare your original lever and master cylinder with the product photos before ordering. For the clutch side of 2015 to 2019 bikes, the matching Accossato lever is the ESB22H.

Road Approval

No German type approval (ABE) is documented for this lever. We therefore sell it for track use.

Scope of Delivery

One Accossato brake lever in the colour and length you select, packed in its own box.

Specifications

  • Part number: EDF022
  • Type: fixed brake lever for the original BMW mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, green, orange, silver and gold; long in blue, green, orange and gold
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: BMW S1000RR, 2009 to 2019
What's includedEverything in the box▼
  • 1x Accossato CNC brake lever in its own box
FitmentWhich bikes this fits▼
  • BMW S1000RR (2009–2019)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.