Brembo Racing Moto2 20-23 monoblock brake caliper right 108mm XA8D1E1 nickel-plated
02 · Data & docs

The facts.

Technical data
Part NumberXA8D1E1
SideRight only
Piston diameter2x 34 mm and 2x 38 mm
Number of pistons4 (titanium)
Pad track width30 mm
Offset22.5 mm
Minimum pad thickness6.5 mm
Maximum pad thickness9.5 mm
Fork mounting hole spacing108 mm
ConstructionCNC-machined monoblock
DescriptionThe whole story▼

Straight from the Moto2 World Championship, the Brembo Racing Moto2 "20-23" Monoblock Brake Caliper Right 108mm (XA8D1E1) delivers the kind of stopping power, modulation and thermal resilience that separates podium finishers from the pack. This is a purpose-built racing caliper — engineered to perform at the absolute limit, lap after lap.

Key Features

  • CNC-machined monoblock body eliminates flex entirely, producing a direct, consistent brake feel that racing riders depend on at corner entry
  • Four titanium pistons (2x 34 mm and 2x 38 mm) manage heat transfer far more efficiently than steel, maintaining stable braking performance even under repeated hard stops
  • Nickel-plated surface provides corrosion resistance and the unmistakable race-grade finish associated with Moto2-spec hardware
  • 30 mm pad track width maximises braking surface contact, extracting the highest possible deceleration from every brake pad compound
  • Central bridge design adds torsional rigidity, translating lever pressure directly into caliper clamping force without energy loss
  • Offset of 22.5 mm ensures precise fitment geometry on compatible racing fork configurations

Developed and Proven in Moto2 Competition

The XA8D1E1 is not a road caliper adapted for track use — it was conceived, tested and refined exclusively for closed-circuit racing. The monoblock architecture means the caliper is machined from a single billet of aluminium, leaving no two-piece joint to introduce compliance under load. Paired with the titanium piston set, the result is a brake system that responds identically whether it is the first braking zone of a race or the last.

The nickel-plated finish is not merely cosmetic. On a racing motorcycle exposed to carbon brake dust, tyre debris and aggressive cleaning chemicals, corrosion resistance is a practical requirement that directly affects caliper longevity across a full season of competition.

Race-Only Application — Important Notes

This caliper is designed exclusively for motorsport use and is not approved or suitable for road or public highway use. It requires a fork with a 108 mm mounting hole spacing — verify your fork specification before ordering. Brake pads are not included and must be ordered separately.

Available Spare Parts

  • 05281213 — Bleed screw
  • 05150220 — Protective cap with tab for bleed screw

Fitment & Compatibility

This caliper fits forks with a 108 mm mounting hole spacing. Based on the Moto2 "20-23" generation specification, it is compatible with a wide range of racing and track-day builds across platforms including Aprilia (RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457), BMW (S1000RR, HP4, HP4R, M1000RR), Ducati (848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S, V4, V4 S, V4 R), Honda (CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R), Kawasaki (ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400), KTM (RC 390, RC8 1190, 990 RC R), MV Agusta (F3, F4), Suzuki (GSX-R 600, GSX-R 750, GSX-R 1000), Triumph (Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS), Yamaha (R1, R1M, R3, R6, R7, R9) and others. Always confirm fork mounting hole spacing is 108 mm before fitting.

Specifications

Specification Detail
Part Number XA8D1E1
Side Right only
Piston diameter 2x 34 mm and 2x 38 mm
Number of pistons 4 (titanium)
Pad track width 30 mm
Offset 22.5 mm
Minimum pad thickness 6.5 mm
Maximum pad thickness 9.5 mm
Fork mounting hole spacing 108 mm
Construction CNC-machined monoblock
Piston material Titanium
Surface finish Nickel-plated
Intended use Racing only — not road legal
Brake pads Not included — order separately
What's includedEverything in the box▼
  • 1x Brembo Racing Moto2 "20-23" Monoblock Brake Caliper Right
FitmentWhich bikes this fits▼
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.