{"title":"Geometry accessories","description":"\u003cp\u003eGeometry hardware from IMA Special Parts, Feel Racing, LighTech and Febur — ride-height plates, offset shims, steering stops and the measured spacers that make chassis changes precise and repeatable.\u003c\/p\u003e\u003cp\u003eThese are the parts that turn setup notes into reality: a two-millimetre plate here, a degree of offset there. Machined to race tolerances, listed per model, and best changed one variable at a time.\u003c\/p\u003e","products":[{"product_id":"lightech-steering-lock-bracket-top-clamp-tcaap003-tcaap004","title":"LighTech Steering Lock Bracket for Top Clamp TCAAP003\/TCAAP004 – Aprilia RSV4\/1100 Factory\/R\/RR\/RF (2009–2026) TCAAP004B","description":"\u003cp\u003eRunning LighTech top clamps on your Aprilia RSV4 and still want to use the bike every day without compromise? The LighTech TCAAP004B steering lock bracket is the one part that bridges race-spec geometry and road-legal practicality, letting you retain the original steering lock assembly in a clean, precisely machined aluminium mount that integrates seamlessly with your LighTech triple clamp.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned exclusively for use with LighTech top clamps TCAAP003 and TCAAP004 — a purpose-built fit, not a universal workaround\u003c\/li\u003e\n\u003cli\u003eMachined aluminium construction delivers a precise, rattle-free location for the OEM steering lock unit\u003c\/li\u003e\n\u003cli\u003eAllows full retention of the original ignition and steering lock on road-registered RSV4 builds\u003c\/li\u003e\n\u003cli\u003eIntegrates cleanly into the existing LighTech triple clamp set-up with no fabrication or modification required\u003c\/li\u003e\n\u003cli\u003eCovers the complete RSV4 family from 2009 through to 2026, including the 1100 Factory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Usability Without Sacrificing Your Track Set-Up\u003c\/h2\u003e\u003cp\u003eUpgrading to a LighTech top clamp is one of the most rewarding geometry changes you can make to an Aprilia RSV4, sharpening steering feel and unlocking precise clip-on positioning. The TCAAP004B exists so that upgrade does not come at the cost of everyday usability. Without a steering lock, a road-registered motorcycle fails roadside checks and is effectively uninsurable in many markets. This bracket mounts the factory steering lock unit exactly where it needs to be — securely and correctly — so your RSV4 transitions between track days and road rides without any swap-out ritual.\u003c\/p\u003e\u003cp\u003eThe bracket itself is machined to the same standards as the rest of the LighTech top clamp family. Aluminium billet construction means it is light and corrosion-resistant, while the precision machining ensures the OEM lock housing sits without play or vibration. There is nothing to adapt, no holes to drill, and no cable ties in sight — it simply bolts in as part of a complete LighTech triple clamp installation.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is designed solely for use alongside LighTech top clamps TCAAP003 and TCAAP004. It is not compatible with the standard Aprilia top clamp or other aftermarket brands.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eCompatible top clamps: LighTech TCAAP003 and TCAAP004 only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: TCAAP004B\u003c\/li\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium\u003c\/li\u003e\n\u003cli\u003eCompatible top clamps: LighTech TCAAP003, TCAAP004\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2020), RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1x steering lock bracket TCAAP004B (steering lock and top clamp not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53169007493386,"sku":"TCAAP004B","price":95.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/TCAAP004B.png?v=1780818893"},{"product_id":"feel-racing-ssp-racing-link-headstock-inserts-kit","title":"Feel Racing SSP Racing Link + Headstock Inserts Kit – Ducati Panigale V2 955 (2020-2024) 69925621A","description":"\u003cp\u003eWhen a standard suspension setup is no longer enough and you are chasing genuine WorldSSP-level geometry, this Ducati Corse SSP Racing Link and Headstock Inserts Kit (69925621A) gives you the precision engineering to make it happen. Manufactured to race-homologated standards, it combines a rear suspension linkage derived from the Panigale 1199 programme with a set of Superbike Headstock Inserts — two components that work together to open up a level of chassis tuning that simply is not available with standard parts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFIM World Supersport approved — a fully regulation-compliant foundation for SSP-class racing builds\u003c\/li\u003e\n\u003cli\u003eRace-derived rear suspension linkage based on the Panigale 1199 concept, supplied with an adjustable Superbike rod for precise rear-end and traction tuning\u003c\/li\u003e\n\u003cli\u003eSuperbike Headstock Inserts deliver steering geometry adjustment across a range of 23.5° (−7.5) to 24.5° (+7.5)\u003c\/li\u003e\n\u003cli\u003eDucati Corse engineering means tolerances, materials and surface finishing are held to the same standards demanded by factory race teams\u003c\/li\u003e\n\u003cli\u003eExpands chassis setup options for turn-in behaviour, mid-corner stability and overall balance — far beyond what spring rate or damping alone can achieve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Engineering\u003c\/h2\u003e\u003cp\u003eThe 69925621A kit is a genuine Ducati Corse racing component, not an aftermarket interpretation. Every element in the kit reflects the exacting production standards of Ducati's factory race department: precision-machined aluminium, tight dimensional tolerances and surface finishing that survives the abuse of endurance track sessions. The adjustable Superbike rod is a particularly telling detail — it speaks to a part designed not just for fitment but for iterative, data-driven setup work. This is hardware made to be adjusted, measured, adjusted again and trusted under race conditions.\u003c\/p\u003e\u003ch2\u003eChassis Geometry and Traction\u003c\/h2\u003e\u003cp\u003eSerious Supersport setup work moves beyond spring and damper adjustments into the realm of geometry. The rear suspension linkage in this kit, derived from the Panigale 1199 concept, gives you a tool for modifying rear-end leverage and balance, directly influencing how the rear tyre loads up under acceleration and how the chassis sits through a corner. The Headstock Inserts take the other end of the equation, allowing the steering head angle to be shifted within a range of 23.5° (−7.5) to 24.5° (+7.5). Smaller angles sharpen turn-in; larger angles add straight-line stability — the correct choice depends on circuit character, tyre compound and rider style. As with all geometry changes, adjustments should be made methodically, with a documented baseline, and confirmed with a proper geometry check after installation.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the Ducati Panigale V2 955 across the following model years:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFitting and alignment must be carried out by a qualified technician or race team. After installation, a full suspension geometry check and calibration is essential before the motorcycle is ridden.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e69925621A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDucati Corse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRear suspension linkage, adjustable Superbike rod, Headstock Inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGeometry Range\u003c\/th\u003e\n\u003ctd\u003e23.5° (−7.5) to 24.5° (+7.5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApproval\u003c\/th\u003e\n\u003ctd\u003eFIM World Supersport approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRacing, trackday, SSP setup tuning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169039016202,"sku":"69925621A","price":1505.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SSPUmlenkungV2.png?v=1780819987"},{"product_id":"feel-racing-steering-head-inserts-set-worldssp","title":"Feel Racing Steering Head Inserts Set WorldSSP – Ducati Panigale V2 955 (2020–2024) 75610401A.KIT","description":"\u003cp\u003eSerious geometry work on the Ducati Panigale V2 955 demands components built to the same standard as the chassis itself. The Feel Racing Steering Head Inserts Set (75610401A.KIT) gives you four discrete headstock angles to choose from, so you can dial in a ride that feels natural and confidence-inspiring all day — whether you are chasing lap times at a trackday or running a full WorldSSP race weekend.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFour setup angles in a single kit — 23.5° (–7.5 \/ –2.5) and 24.5° (+2.5 \/ +7.5) — covering a meaningful range from sharper turn-in to greater high-speed stability\u003c\/li\u003e\n\u003cli\u003eDucati Corse-grade superbike component, engineered specifically for race-oriented geometry work on the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003eAllows targeted adjustment of steering head geometry to suit track layout, tyre compound, riding style and suspension baseline\u003c\/li\u003e\n\u003cli\u003eWorks in conjunction with other chassis and suspension components for a cohesive, measurable setup\u003c\/li\u003e\n\u003cli\u003eDirect OE-style fitment means no modification is required — swap, measure, test and document\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Confidence Through Geometry\u003c\/h2\u003e\u003cp\u003eSpring rates and damping get most of the attention at a paddock garage, but when a rider feels unsettled mid-corner or lacks front-end feedback across a long stint, the answer often lies in the headstock. Altering the steering head angle shifts the balance between agility and stability in a way that no amount of preload adjustment can replicate. The Feel Racing inserts give your Panigale V2 955 a language it can speak clearly — one that translates directly into consistent lap times and reduced fatigue over a full race distance or extended trackday session.\u003c\/p\u003e\u003ch3\u003eRacing and Trackday Application\u003c\/h3\u003e\u003cp\u003eEach insert in this kit corresponds to a specific setup angle, letting you and your technician work methodically through changes rather than guessing. Running a tight, technical circuit that rewards quick direction changes? Move toward the –7.5 offset. Heading to a high-speed venue where the bike needs to settle under braking? The +7.5 position provides the additional stability margin. Always measure the complete geometry after fitting and progress through changes one step at a time, noting the setup configuration at each stage.\u003c\/p\u003e\u003cp\u003eNote: changes to steering geometry have a significant effect on handling and stability. A professional alignment check after installation is strongly recommended, as is a methodical, documented approach to testing each configuration.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 (2020, 2021, 2022, 2023, 2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e75610401A.KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eFeel Racing \/ Ducati Corse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSBK Headstocks Inserts Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup angles\u003c\/td\u003e\n\u003ctd\u003e23.5° (–7.5 \/ –2.5) and 24.5° (+2.5 \/ +7.5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRacing \/ trackday \/ geometry setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169039802634,"sku":"75610401A.KIT","price":536.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HeadstockInserts.png?v=1780820006"},{"product_id":"melotti-racing-steering-limiter-aprilia-rs-660-2021-2026-ls-ap-7211","title":"Melotti Racing Steering Limiter Aprilia RS 660 (2021-2026) – LS.AP.7211","description":"\u003cp\u003eThe Aprilia RS 660, built since 2021, turned a mid-size parallel-twin into a genuine trackday weapon, and once an RS 660 starts doing laps rather than commutes, its steering lock becomes a problem nobody mentions until the first tip-over in the paddock. A fork that swings all the way to its stop under its own weight can crack a fairing panel, pinch a brake hose or chip a radiator fin, and the usual fix on a race grid has long been a loose weight hung off the bars to slow the swing down. Melotti Racing built the LS.AP.7211 steering limiter to remove that improvisation from the RS 660 altogether.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering limiter for the Aprilia RS 660, 2021 onwards\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part LS.AP.7211, central body machined from ergal\u003c\/li\u003e\n\u003cli\u003eStainless M8 stud carries the limiting bushing\u003c\/li\u003e\n\u003cli\u003eBushing in technopolymer with high impact-absorption capacity\u003c\/li\u003e\n\u003cli\u003eSeeger ring lets the bushing be swapped out quickly\u003c\/li\u003e\n\u003cli\u003eRemoves the need for improvised balance weights on the fork\u003c\/li\u003e\n\u003cli\u003eSame part is also listed for the Aprilia RS 457\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe limiter's central body is machined from ergal, the aluminium alloy Melotti uses across its racing hardware, and it is held in place by a stainless steel M8 stud running through the steering head area. The part that actually does the work is the bushing around that stud: moulded from a technopolymer chosen specifically for its capacity to absorb impact, it is the piece that takes the hit when the forks reach the end of their travel, rather than letting that energy reach the fairing, the hose routing or the radiator. A seeger ring retains the bushing, and Melotti designed the fit so that ring can be popped off and the bushing changed in minutes rather than requiring the limiter to be stripped down after every knock. For a bike that spends its weekends being wheeled around a paddock, pushed onto a stand and occasionally dropped at low speed, that is the detail that matters.\u003c\/p\u003e\n\u003ch2\u003eBoxengasse and Paddock Routine\u003c\/h2\u003e\n\u003cp\u003eOn a trackday or a club meeting, the RS 660 rarely falls at speed; it tips over at walking pace, on a stand that was not quite level, or when a marshal waves the bike back and the front end is left to its own devices. Without a limiter, that is exactly the moment the fork turns past where the bodywork or the cables were ever meant to go. With the LS.AP.7211 fitted, the steering simply cannot reach that point, and the technopolymer bushing absorbs the knock instead of the plastic around it. It is a small, unglamorous part, but it is the kind of fitting that experienced trackday riders add before anything else, because it changes nothing about how the RS 660 steers on track and everything about how little a slow-speed mishap in the pits ends up costing.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists the LS.AP.7211 for the Aprilia RS 660 built from 2021 onwards. The same part is also catalogued for the Aprilia RS 457, which shares the steering head dimensions this limiter is designed around; it is not offered for the RS 660 Factory variant, which Melotti's documentation does not cover separately. If you also run Melotti's top yoke (PS.AP.721), steering damper bracket (SA.AP.7212), racing clip-ons (SM.AP.721) or dashboard protection (DC.AP.7211) on the same RS 660, the limiter shares the steering head area without conflicting with any of them.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThere is no German ABE, no component certificate and no EC type approval for this steering limiter. Melotti builds it for racing and closed-circuit use only; riding an RS 660 fitted with it on public roads in Germany is not permitted without a separate entry, and any race meeting applies its own organiser's rules on top of this.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne LS.AP.7211 steering limiter for the Aprilia RS 660, complete with its stainless M8 stud, the technopolymer bushing and the seeger ring that retains it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.AP.7211\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900497387786,"sku":"LS.AP.7211","price":63.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/35121_00.png?v=1791818988"},{"product_id":"melotti-racing-steering-limiter-aprilia-rs-457-2024-2026-ls-ap-7211","title":"Melotti Racing Steering Limiter Aprilia RS 457 (2024-2026) – LS.AP.7211","description":"\u003cp\u003eThe Aprilia RS 457, on sale since 2024, gave riders stepping up into circuit racing a twin-cylinder machine light enough to be forgiving and cheap enough to crash without ruining a season, which is exactly why so many RS 457s end up on a race grid rather than a showroom floor. A bike that lives on a paddock stand between sessions needs its steering kept away from the fairing and the hose routing when nobody is holding the bars, and the usual answer, a loose weight clipped to the end of a clip-on, is slow to fit and easy to knock off. Melotti Racing's LS.AP.7211 steering limiter does that job properly on the RS 457.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering limiter for the Aprilia RS 457, 2024 onwards\u003c\/li\u003e\n\u003cli\u003eCentral body machined from ergal, Melotti part LS.AP.7211\u003c\/li\u003e\n\u003cli\u003eStainless M8 stud holds the limiting bushing in place\u003c\/li\u003e\n\u003cli\u003eTechnopolymer bushing rated for high impact absorption\u003c\/li\u003e\n\u003cli\u003eSeeger ring allows a fast bushing change\u003c\/li\u003e\n\u003cli\u003eReplaces loose balance weights used on race grids\u003c\/li\u003e\n\u003cli\u003eSame part is also listed for the Aprilia RS 660\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti machines the limiter's central body from ergal and runs it on a stainless M8 stud through the steering head. The bushing fitted around that stud is moulded in a technopolymer chosen for its ability to absorb an impact, so when the fork reaches the end of its permitted travel, the bushing takes the hit rather than the fairing, the dash wiring or anything else packed into the front of a small, tightly built bike like the RS 457. A seeger ring holds the bushing in place, and because that ring comes off without tools, a bushing that has taken a few knocks over a season of racing can be renewed in minutes between races rather than at the end of it.\u003c\/p\u003e\n\u003ch2\u003eStarting Out on the Grid\u003c\/h2\u003e\n\u003cp\u003eA lot of riders meet club racing for the first time on a bike exactly like the RS 457: light, inexpensive to run and forgiving if a corner goes wrong. That also means it gets wheeled, dropped and propped up more casually than a bike nobody can afford to replace, and a steering head left unprotected through all of that eventually shows it in a cracked fairing lug or a pinched cable. Fitting the LS.AP.7211 early, before the first full season rather than after the first slow fall, is the cheaper order to do things in. It changes nothing about how the RS 457 turns in or holds a line, which matters to a rider who is still learning both.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists the LS.AP.7211 for the Aprilia RS 457 built from 2024 onwards, and the identical part is also catalogued for the Aprilia RS 660, which uses the same steering head dimensions. Melotti does not list any other part specifically for the RS 457 alongside this limiter, so riders fitting it should treat it as a standalone addition to the steering head rather than part of a larger kit.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThere is no German ABE, no component certificate and no EC type approval for this steering limiter. Melotti builds it for racing and closed-circuit use only; riding an RS 457 fitted with it on public roads in Germany is not permitted without a separate entry, and any race meeting applies its own organiser's rules on top of this.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne LS.AP.7211 steering limiter for the Aprilia RS 457, supplied with its stainless M8 stud, the technopolymer bushing and the seeger ring that secures it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.AP.7211\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 457 (2024-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900497715466,"sku":"LS.AP.7211","price":63.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/35121_00_4c37c822-1de1-408d-a235-a7ccc8441f58.png?v=1791818995"},{"product_id":"melotti-racing-steering-limiter-kawasaki-ninja-400-2018-2020-ls-ka-4182","title":"Melotti Racing Steering Limiter Kawasaki Ninja 400 (2018-2020) – LS.KA.4182","description":"\u003cp\u003eA Kawasaki Ninja 400 prepared for club racing between 2018 and 2020 does not need the heavy balance weights that keep a road-going front end calm, once the steering lock is handled a different way. Melotti Racing's Steering Limiter replaces that old approach with a single machined part that sets how far the bars can turn, a detail most riders only think about after their first tank-slapper on a stripped-down 400.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering limiter for the Kawasaki Ninja 400, 2018 to 2020\u003c\/li\u003e\n\u003cli\u003eMelotti part LS.KA.4182\u003c\/li\u003e\n\u003cli\u003eMachined from solid aluminium alloy\u003c\/li\u003e\n\u003cli\u003eSets the steering angle for racing use\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights\u003c\/li\u003e\n\u003cli\u003eDrilling template for the steering-stop pin included in the kit\u003c\/li\u003e\n\u003cli\u003eNatural anodised finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti machines the LS.KA.4182 from a solid billet of aluminium alloy rather than casting it, giving the limiter the rigidity it needs at the one job it does: setting a fixed, repeatable steering angle on a Ninja 400 that has had its road-going lock mechanism altered for racing. Where a standard bike relies in part on balance weights in the bars to settle the front end at speed, this limiter takes a more direct approach, physically stopping the steering at a chosen angle instead. The kit includes a drilling template for the steering-stop pin, so the one hole the part needs can be placed accurately rather than measured by eye.\u003c\/p\u003e\n\u003ch2\u003eOne Part, One Less Reason to Carry Spare Weights\u003c\/h2\u003e\n\u003cp\u003eRiders who have raced a 400 with balance weights still fitted know the routine: swap them for a lighter or heavier set depending on track and tyre, and keep a small box of options in the van just in case. Melotti's limiter removes that whole exercise for a Ninja 400 running without the weights, because the steering angle itself, not the mass in the bar ends, is what is being controlled. It is a change most racers make once, early in a build, alongside the AIS valve cover and before anything to do with suspension settings, since it touches how the bike handles the moment the front wheel is turned hard, not just how it rides in a straight line.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists the LS.KA.4182 for the Kawasaki Ninja 400 built between 2018 and 2020 only, and our listing follows that window exactly; it is not listed for later Ninja 400 model years. It is designed to work with the bike's own top yoke and steering stop, not as a direct substitute for the AIS valve cover Melotti also offers for the same Ninja 400, though many riders order both together.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE exists for the LS.KA.4182, and a fixed racing steering limiter of this kind is not something that can be registered for public roads. We supply it for racetrack and closed-circuit use, under the organiser's own rules at any given meeting.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne LS.KA.4182 steering limiter, natural anodised aluminium alloy, with the drilling template for the steering-stop pin.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.KA.4182\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki Ninja 400 (2018-2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900498043146,"sku":"LS.KA.4182","price":39.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/35221_00.png?v=1791819018"},{"product_id":"melotti-racing-steering-limiter-yamaha-yzf-r6-2006-2025-ls-ya-2152","title":"Melotti Racing Steering Limiter Yamaha YZF-R6 (2006-2025) – LS.YA.2152","description":"\u003cp\u003eStock-class rules for the Yamaha YZF-R6, built from 2006 onward, leave the fork and steering head alone, but they do not stop a rider from changing how the steering itself is limited. Melotti Racing's Steering Limiter replaces the classic approach of balance weights in the bars with a single machined stop, a change most YZF-R6 club racers make early in a build once they stop relying on bar-end mass to settle the front end.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering limiter for the Yamaha YZF-R6, 2006 onward\u003c\/li\u003e\n\u003cli\u003eMelotti part LS.YA.2152\u003c\/li\u003e\n\u003cli\u003eMachined from solid aluminium alloy\u003c\/li\u003e\n\u003cli\u003eSets a fixed steering angle for racing use\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights\u003c\/li\u003e\n\u003cli\u003eNatural anodised finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti machines the LS.YA.2152 from a solid billet of aluminium alloy, built to do one job precisely: stop the YZF-R6's steering at a chosen angle rather than letting mass in the handlebar ends do the work of settling the front end. It is a simple part by design, with no moving components of its own, which is also why it needs no maintenance once it is set during the initial build. The natural anodised finish matches the rest of Melotti's chassis hardware for this model.\u003c\/p\u003e\n\u003ch2\u003eWhat the Weights Used to Do\u003c\/h2\u003e\n\u003cp\u003eOn a road-going YZF-R6, bar-end weights damp the kind of oscillation that shows up at speed, a job that in a stock-class racing context is better handled by limiting the steering angle directly rather than adding mass that also affects how quickly the bike can be flicked side to side. Once a rider fits Melotti's limiter, the weights can come off entirely, which on a 600 built for lap time is a welcome, if small, reduction in unsprung-adjacent mass at the extremities of the bars. It is one of the changes a stock-class YZF-R6 goes through before anything to do with suspension settings, because it touches how the bike behaves the moment the front wheel is turned hard rather than how it rides in a straight line.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists the LS.YA.2152 for the Yamaha YZF-R6 from 2006 onward, matching our listing. It pairs with Melotti's own GP or Road top yoke, AIS valve cover set and switch-and-support fittings also offered for the same YZF-R6, and does not depend on which of those top yokes is fitted.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE exists for the LS.YA.2152, and a fixed racing steering limiter of this kind cannot be registered for public roads. We supply it for racetrack and closed-circuit use, under the organiser's own rules at any given meeting.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne LS.YA.2152 steering limiter, natural anodised aluminium alloy, for the Yamaha YZF-R6.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.YA.2152\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 (2006-2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900503384330,"sku":"LS.YA.2152","price":29.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/33314_01.png?v=1791819156"},{"product_id":"melotti-racing-steering-limiter-yamaha-yzf-r7-2021-2026-ls-ya-7212","title":"Melotti Racing Steering Limiter Yamaha YZF-R7 (2021-2026) – LS.YA.7212","description":"\u003cp\u003eThe YZF-R7, built since 2021, has become one of the more common starting points for riders moving up into club racing and national 300\/400-style supersport classes, partly because it is light enough to be forgiving and cheap enough to crash without ending a season. Once a YZF-R7 goes racing, the steering lock stops being a detail: an unlimited steering angle lets the bars flop hard against the tank or fairing in a fall, and race classes commonly require it to be restricted. Melotti Racing's steering limiter for the YZF-R7 is machined from solid aluminium alloy and bolts in to set that limit without the trial-and-error of balance weights.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering limiter machined from solid aluminium alloy for the YZF-R7\u003c\/li\u003e\n\u003cli\u003eSets a fixed, reduced steering angle for racing use\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights used to limit lock\u003c\/li\u003e\n\u003cli\u003eMelotti part LS.YA.7212, a single component\u003c\/li\u003e\n\u003cli\u003eSuited to club racing and entry-level supersport classes on the YZF-R7\u003c\/li\u003e\n\u003cli\u003eFits the YZF-R7 built from 2021 onward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eMelotti Racing machines the LS.YA.7212 from a solid billet of aluminium alloy rather than casting or stamping it, which lets it hold a tighter, more repeatable stop angle than a pressed part would. The idea behind a steering limiter is simple: race regulations frequently cap how far the bars can turn, both to limit the violence of a tank-slapper and to stop the forks and bars thrashing around after a crash. Melotti Racing builds this one specifically to bolt onto the YZF-R7's steering stem area, in place of fiddling with the stacked weights some riders still use to achieve the same restriction.\u003c\/p\u003e\u003ch2\u003eA Starting Point for Race-Class Riders\u003c\/h2\u003e\u003cp\u003eFor riders stepping up from a licence course onto a grid for the first time, the YZF-R7 is often chosen precisely because its parts list, Melotti Racing's included, is short and specific rather than overwhelming. A steering limiter is usually one of the first items on a scrutineering checklist, alongside catch tanks and lockwiring, so fitting a purpose-built part rather than improvising with weights saves an argument with race officials before the first session. It is a small, inexpensive item next to a fairing kit or a set of clip-ons, but it is one most series will not let a YZF-R7 race without.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eMelotti Racing lists the LS.YA.7212 for the YZF-R7 from 2021 onward. The same bike also takes Melotti's quick-change front fender support kit and side-mount steering damper kit, so riders fitting a limiter at the same time as a damper conversion can order all three together.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo type approval or test certificate is on file for this steering limiter. Melotti Racing sells it for racetrack and closed-circuit use, and fitting it to a YZF-R7 ridden on public roads in Germany without separate registration is not permitted; at race meetings the organiser's rules decide what is required.\u003c\/p\u003e\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eOne LS.YA.7212 steering limiter, machined from solid aluminium alloy, for the Yamaha YZF-R7.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.YA.7212\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R7 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900519145738,"sku":"LS.YA.7212","price":42.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36243_00.png?v=1791819378"},{"product_id":"melotti-racing-steering-limiter-yamaha-yzf-r1-2015-2025-ls-ya-3151","title":"Melotti Racing Steering Limiter Yamaha YZF-R1 (2015-2025) – LS.YA.3151","description":"\u003cp\u003eThe YZF-R1 built from 2015 to 2025 is raced widely enough, from club grids to national superbike classes, that a dedicated steering limiter is one of the more frequently ordered Melotti Racing parts for this bike. Machined from solid aluminium alloy, it sets a fixed, reduced steering lock for racing and removes the need for the stacked balance weights some riders still use to achieve roughly the same restriction by trial and error. It is a plain part with one job, but on a racetrack-prepared YZF-R1 it is also one most series will check for at scrutineering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering limiter machined from solid aluminium alloy for the YZF-R1\u003c\/li\u003e\n\u003cli\u003eSets a fixed, reduced steering angle for racing use\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights used to limit lock\u003c\/li\u003e\n\u003cli\u003eMelotti part LS.YA.3151, a single component\u003c\/li\u003e\n\u003cli\u003eShares its category with the switch and support accessories built for the YZF-R1's top yokes\u003c\/li\u003e\n\u003cli\u003eFits the YZF-R1 built from 2015 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eMelotti Racing machines the LS.YA.3151 from a solid billet of aluminium alloy, which gives it a more repeatable stop angle than a part stamped or cast to the same shape. A steering limiter works by physically capping how far the bars can turn, both to reduce the violence of a tank-slapper at speed and to stop the forks and bars thrashing wildly once a bike is already down. Fitting one is generally more compact and more consistent than the practice of taping or bolting on extra balance weights to achieve a similar, rougher limitation.\u003c\/p\u003e\u003ch2\u003eSteering Angle in the Stock Class\u003c\/h2\u003e\u003cp\u003eMost production-based race categories cap the steering angle on a bike of this kind for safety rather than performance reasons, and scrutineers checking a YZF-R1 before a session will typically look for exactly this kind of purpose-built limiter rather than an improvised fix. Because the LS.YA.3151 is a single, solid-machined component rather than a stack of weights that can shift or loosen, it tends to pass that check without discussion, which matters on a grid morning when there is no time left to argue over a technicality before the warm-up lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis limiter is built for the YZF-R1 from 2015 to 2025. Riders assembling a full front-end conversion for this bike, combining a top yoke, wheel axle sliders, the fender support kit and the RBS brake system, typically order the limiter last, once the rest of the geometry is already locked in, since the final lock angle it sets can depend on which top yoke is fitted.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo type approval or test certificate is on file for this steering limiter. Melotti Racing sells it for racetrack and closed-circuit use, fitting it to a YZF-R1 ridden on public roads in Germany without separate registration is not permitted, and at race meetings the organiser's rules decide what is required.\u003c\/p\u003e\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eOne LS.YA.3151 steering limiter, machined from solid aluminium alloy, for the Yamaha YZF-R1.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.YA.3151\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 (2015-2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900526780682,"sku":"LS.YA.3151","price":63.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/33568_00.png?v=1791819444"},{"product_id":"melotti-racing-steering-limiter-triumph-street-triple-765-rs-2017-2025-ls-tr-223","title":"Melotti Racing Steering Limiter Triumph Street Triple 765 RS (2017-2025) – LS.TR.223","description":"\u003cp\u003eTriumph updated the Street Triple 765 RS partway through its production run, and Melotti Racing's steering limiter for this bike is built with that in mind: a single part machined from solid aluminium alloy, with an adjustment slot that lets it fit either the 2017-2022 or the 2023-2025 version of the 765 RS. Beyond fitting both generations of frame, it does the usual job of a race-spec limiter, setting a fixed steering angle without the stacked balance weights some riders still use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering limiter machined from solid aluminium alloy for the Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eAdjustment slot fits both the 2017-2022 and 2023-2025 versions of the 765 RS\u003c\/li\u003e\n\u003cli\u003eZeroes out the play between the frame and the limiter on installation\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights used to limit lock\u003c\/li\u003e\n\u003cli\u003eSupplied with a drilled hex-head ProBolt screw for safety-wiring through the holes provided\u003c\/li\u003e\n\u003cli\u003eFits the Street Triple 765 RS built from 2017 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eMelotti Racing machines the LS.TR.223 from a solid billet of aluminium alloy, and builds in a slotted adjustment range specifically because Triumph changed the Street Triple 765 RS's frame partway through its production run; rather than sell two separate part numbers, Melotti Racing designed one limiter that takes up any play between the frame and the part across both versions when it is fitted and tightened. The screw supplied is a ProBolt item with a drilled hex head, which lets a rider or mechanic run safety wire through it as most race series require for fasteners that could otherwise work loose.\u003c\/p\u003e\u003ch2\u003eAn Off-Season Fix for the Adjustment Slot\u003c\/h2\u003e\u003cp\u003eRiders who bought a 765 RS before the frame update and are now preparing it for a new season sometimes find their existing steering limiter no longer sits as tightly as it should once other chassis parts have been serviced, and this is the part Melotti Racing built to close that gap again regardless of which frame generation the bike has. Doing this kind of fitment check during winter downtime, before the first test day of the year, is a straightforward way to catch play in the steering limiter before it becomes a scrutineering question on the first grid of the season.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eBecause the adjustment slot in this limiter spans both 765 RS frame generations, it fits every RS built from 2017 to 2025 without a model-year lookup, and the identical part is listed separately for the 765 R. Owners changing the rear suspension linkage or fitting a GP top yoke at the same time usually order this limiter last, as noted above.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo type approval or test certificate is on file for this steering limiter. Melotti Racing sells it for racetrack and closed-circuit use, fitting it to a Street Triple 765 RS ridden on public roads in Germany without separate registration is not permitted, and at race meetings the organiser's rules decide what is required.\u003c\/p\u003e\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eOne LS.TR.223 steering limiter, machined from solid aluminium alloy, supplied with a drilled hex-head ProBolt screw, for the Triumph Street Triple 765 RS.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.TR.223\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph Street Triple 765 RS (2017-2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900538806538,"sku":"LS.TR.223","price":69.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36170_00.png?v=1791819526"},{"product_id":"melotti-racing-steering-limiter-triumph-street-triple-765-r-2017-2025-ls-tr-223","title":"Melotti Racing Steering Limiter Triumph Street Triple 765 R (2017-2025) – LS.TR.223","description":"\u003cp\u003eThe naked Street Triple 765 R also went through the same mid-production frame revision as the RS, and Melotti Racing's steering limiter for it is the identical part: machined from solid aluminium alloy, with an adjustment slot that covers both the 2017-2022 and 2023-2025 versions of the 765 R without needing two separate listings. It sets a fixed, reduced steering angle for racing use and replaces the stacked balance weights some riders still fall back on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering limiter machined from solid aluminium alloy for the Street Triple 765 R\u003c\/li\u003e\n\u003cli\u003eAdjustment slot fits both the 2017-2022 and 2023-2025 versions of the 765 R\u003c\/li\u003e\n\u003cli\u003eZeroes out the play between the frame and the limiter on installation\u003c\/li\u003e\n\u003cli\u003eRemoves the need for the classic balance weights used to limit lock\u003c\/li\u003e\n\u003cli\u003eSupplied with a drilled hex-head ProBolt screw for safety-wiring through the holes provided\u003c\/li\u003e\n\u003cli\u003eFits the Street Triple 765 R built from 2017 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eAs with the RS version, Melotti Racing machines the LS.TR.223 from a solid billet of aluminium alloy and gives it a slotted adjustment range built around Triumph's mid-production frame revision of the Street Triple 765 R, so one part number covers the bike whichever side of that update it was built on. Tightening the limiter down on installation takes up the play between the frame and the part, and the drilled hex-head ProBolt screw supplied lets a mechanic add safety wire where a series requires it.\u003c\/p\u003e\u003ch2\u003eRemoving Play Between Frame and Limiter\u003c\/h2\u003e\u003cp\u003eOver a season of racing, vibration and repeated hard impacts into the steering lock can let a limiter work slightly loose even when it was torqued correctly at fitment, and on a 765 R that has been through a crash or two this is worth checking before it turns into a looser lock angle than the rules allow. Because this limiter's slot is designed to zero out that play against either frame generation, refitting or re-tightening it during a routine workshop check is a quick way to confirm the lock angle is still where it was set, rather than discovering a problem at scrutineering.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis limiter's slotted design covers both frame generations of the naked 765 R, built from 2017 to 2025, and the identical part is listed separately for the 765 RS. It is usually the last item added once a 765 R's suspension linkage has already been changed, since resetting the lock angle makes more sense after the geometry is finalised.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo type approval or test certificate is on file for this steering limiter. Melotti Racing sells it for racetrack and closed-circuit use, fitting it to a Street Triple 765 R ridden on public roads in Germany without separate registration is not permitted, and at race meetings the organiser's rules decide what is required.\u003c\/p\u003e\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eOne LS.TR.223 steering limiter, machined from solid aluminium alloy, supplied with a drilled hex-head ProBolt screw, for the Triumph Street Triple 765 R.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Steering Limiter\u003c\/li\u003e\n\u003cli\u003ePart number: LS.TR.223\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph Street Triple 765 R (2017-2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900541821194,"sku":"LS.TR.223","price":69.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36170_00_a8f66e80-7598-4627-89f5-f10bf5f48c0f.png?v=1791819534"},{"product_id":"ducabike-lowering-rear-reaction-rods-ducati-streetfighter-v4-2020-2024-adr07","title":"Ducabike Lowering Rear Reaction Rods Ducati Streetfighter V4 (2020-2024) – ADR07","description":"\u003cp\u003eInter-Pace offers Ducabike reference ADR07, the Lowering Rear Reaction Rods, for the Ducati Streetfighter V4 from the 2020-2024 production run. Ducabike keeps a compatibility list for each part number, and the Streetfighter V4 appears on the list for ADR07. Ducabike accessories are made to be ordered by number, and for the Ducati Streetfighter V4 this is ADR07.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eLowers the rear by 16 mm compared with stock height\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eReplaces the original rear reaction rods, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Streetfighter V4, 2020-2024\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Part in Use\u003c\/h2\u003e\u003cp\u003eWith ADR07 fitted, the rear sits 16 mm lower than with the original reaction rods. ADR07 replaces the original reaction rods as a plug and play kit with all small parts.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003eCheck the label of any cleaner before using it on aluminium such as that of ADR07. Do not use ADR07 as a step, handle or support unless it is designed for that. Once a season, check ADR07 more closely, including any fixings and contact areas.\u003c\/p\u003e\u003ch2\u003eMounting\u003c\/h2\u003e\u003cp\u003eOnce fitted, ADR07 stands in for the original rear reaction rods on the rear suspension linkage. Taking over the role of the original rear reaction rods, ADR07 is fitted on the rear suspension linkage. ADR07 consists of several parts that Ducabike supplies together as a kit. Check that every affected function works properly before the first ride with ADR07. Test every affected function at standstill first, then carefully at low speed. Brake cleaner or a degreaser on a cloth removes oil from contact faces before ADR07 goes on. Under Downloads you can save the installation PDF for ADR07 to your phone or computer.\u003c\/p\u003e\u003ch2\u003eMade by Ducabike\u003c\/h2\u003e\u003cp\u003eA thin natural oxide layer shields aluminium from corrosion, one reason Ducabike uses it for ADR07. Weight saved on accessories adds up over the whole motorcycle, and an aluminium part like ADR07 contributes to that. Fine edges and clean transitions on ADR07 reflect the way Ducabike processes aluminium.\u003c\/p\u003e\u003ch2\u003eColour at a Glance\u003c\/h2\u003e\u003cp\u003eMatching ADR07 to the wheels or the frame is easy when you choose from black and red.\u003c\/p\u003e\u003ch2\u003eWhich Motorcycle It Fits\u003c\/h2\u003e\u003cp\u003eThe motorcycle named for ADR07 on this page is the Ducati Streetfighter V4 (2020-2024), following Ducabike. Look at the type plate or papers of your Streetfighter V4 if the version is not clear to you. Confirm the exact model name before ordering, because this page serves the Ducati Streetfighter V4 only. ADR07 also appears in the Ducabike fitment for Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S; each motorcycle has a page of its own. When in doubt about ADR07, ask first and order afterwards.\u003c\/p\u003e\u003ch2\u003eUsing It on the Road\u003c\/h2\u003e\u003cp\u003eA parts report for ADR07 is not available, and neither is an ABE. When selling the motorcycle later, tell the buyer that ADR07 has been fitted so that they can check the legal position. The rules for using ADR07 on public roads are set by the authorities in your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112344834314,"sku":"ADR07D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112344867082,"sku":"ADR07A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr07d_1.png?v=1794458792"},{"product_id":"ducabike-lowering-rear-reaction-rods-ducati-streetfighter-v4-s-2020-2024-adr07","title":"Ducabike Lowering Rear Reaction Rods Ducati Streetfighter V4 S (2020-2024) – ADR07","description":"\u003cp\u003eYou are looking at reference ADR07 from Ducabike: the Lowering Rear Reaction Rods for the Ducati Streetfighter V4 S (2020-2024). Inter-Pace ships ADR07 for the Streetfighter V4 S as supplied by Ducabike, without modifications. Ducabike supplies ADR07 through specialist dealers such as Inter-Pace, here specifically for the Streetfighter V4 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eLowers the rear by 16 mm compared with stock height\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Streetfighter V4 S, 2020-2024\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eThe installation point on the rear suspension linkage remains, but ADR07 is used there instead of the original rear reaction rods. Fitting position for ADR07: on the rear suspension linkage, replacing the original rear reaction rods. You do not need to order components of ADR07 separately; they come as a set. Have a qualified mechanic inspect ADR07 after fitting if you did the work yourself. Retightening the fixings of ADR07 once the first kilometres are behind you is part of the job. Allow enough time for fitting ADR07; rushing is a common cause of damage. Store a copy of the Downloads file in case ADR07 has to be refitted after other work on the motorcycle.\u003c\/p\u003e\u003ch2\u003eConstruction\u003c\/h2\u003e\u003cp\u003eDepending on the design, ADR07 starts as aluminium bar or plate before it is brought to its final form. With aluminium as its material, ADR07 adds little weight to the motorcycle. Inter-Pace sells ADR07 as Ducabike makes it, with the aluminium and finish chosen by the manufacturer.\u003c\/p\u003e\u003ch2\u003eDoes It Fit?\u003c\/h2\u003e\u003cp\u003eInter-Pace copies the fitment of ADR07 unchanged from Ducabike, whose list includes the Ducati Streetfighter V4 S (2020-2024). Year and model must both match before you order: Ducati Streetfighter V4 S, 2020-2024. We recommend checking once more that your Streetfighter V4 S falls within 2020-2024. Ducabike's application list puts Ducati Streetfighter V4, Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S next to this motorcycle for ADR07. For special editions and limited series, a quick query about ADR07 can save time.\u003c\/p\u003e\u003ch2\u003eUse on the Motorcycle\u003c\/h2\u003e\u003cp\u003eADR07 lowers the rear of the motorcycle by 16 mm compared with the standard height. Ducabike supplies ADR07 with every small part needed, so the original rods can be swapped directly.\u003c\/p\u003e\u003ch2\u003eEveryday Care\u003c\/h2\u003e\u003cp\u003eGentle movements with a soft cloth are enough to keep ADR07 clean. Wax or sealant is optional for ADR07; if you use it, choose one that suits aluminium. Garage dust settles on every part, and a regular wipe keeps ADR07 clean without effort.\u003c\/p\u003e\u003ch2\u003eYour Colour\u003c\/h2\u003e\u003cp\u003eDucabike decides the colour range, and for ADR07 that means black and red.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eCustomers who need an ABE should know that ADR07 is supplied without one. Where questions remain, a testing organisation in your country can assess ADR07. Your country's vehicle regulations are the benchmark for ADR07, not the product description.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112345129226,"sku":"ADR07D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112345161994,"sku":"ADR07A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr07d_1.png?v=1794458792"},{"product_id":"ducabike-lowering-rear-reaction-rods-ducati-panigale-v4-2018-2024-adr07","title":"Ducabike Lowering Rear Reaction Rods Ducati Panigale V4 (2018-2024) – ADR07","description":"\u003cp\u003eThis page is about the Ducabike Lowering Rear Reaction Rods, number ADR07, and the 2018-2024 Ducati Panigale V4. As a rider of the Panigale V4, you will find the key facts about ADR07 grouped by topic below. Inter-Pace describes ADR07 for the Panigale V4 with the information Ducabike publishes, and nothing more.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eLowers the rear by 16 mm compared with stock height\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Panigale V4, 2018-2024\u003c\/li\u003e\n\u003cli\u003ePDF fitting instructions in the Downloads tab\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eFor ADR07, the colour list reads black and red.\u003c\/p\u003e\u003ch2\u003eThe Part in Use\u003c\/h2\u003e\u003cp\u003eWith ADR07 fitted, the rear sits 16 mm lower than with the original reaction rods. ADR07 replaces the original reaction rods as a plug and play kit with all small parts.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eCheck the label of any cleaner before using it on aluminium such as that of ADR07. A charger cable or tie-down strap resting on ADR07 can leave marks over time. Covering the motorcycle loosely allows moisture to escape, which is good for ADR07.\u003c\/p\u003e\u003ch2\u003eWhich Motorcycle It Fits\u003c\/h2\u003e\u003cp\u003eThe Panigale V4 version from 2018-2024 is where Ducabike places ADR07 in its compatibility list. Year and model must both match before you order: Ducati Panigale V4, 2018-2024. Ordering is straightforward once you have confirmed the Panigale V4 and its build year. The compatibility list for ADR07 continues with Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4 R, Ducati Panigale V4 S. Mistakes in ordering are easy to avoid: check model and year in your vehicle documents before ordering ADR07.\u003c\/p\u003e\u003ch2\u003eWhat Goes Into It\u003c\/h2\u003e\u003cp\u003eAluminium was the obvious candidate for ADR07: it is light, strong enough for the task and easy to finish. Ducabike makes ADR07 from aluminium, a metal that combines low weight with good strength. Thanks to Ducabike's handling of aluminium, ADR07 has a finish that matches its technical purpose.\u003c\/p\u003e\u003ch2\u003eInstalling the Part\u003c\/h2\u003e\u003cp\u003eFitting ADR07 on the rear suspension linkage retires the original rear reaction rods from service. Fitting position for ADR07: on the rear suspension linkage, replacing the original rear reaction rods. Several components arrive together when you order ADR07. Before riding off, make sure nothing has been left loose in the area of ADR07. Include ADR07 in your regular checks of the motorcycle, especially after long trips. Never force a screw when fitting ADR07: if a thread runs tight, stop and look for the cause. Reading through the Ducabike PDF under Downloads gives you an idea of the work involved in fitting ADR07.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eThe manufacturer's paperwork for ADR07 does not include an ABE. Before a vehicle inspection, it is worth asking in advance how ADR07 will be judged. A recognised inspector can say whether your papers have to mention ADR07.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 (2018-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112345751818,"sku":"ADR07D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112345784586,"sku":"ADR07A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr07d_1.png?v=1794458792"},{"product_id":"ducabike-lowering-rear-reaction-rods-ducati-panigale-v4-r-2019-2024-adr07","title":"Ducabike Lowering Rear Reaction Rods Ducati Panigale V4 R (2019-2024) – ADR07","description":"\u003cp\u003eAccording to Ducabike, the Ducati Panigale V4 R built 2019-2024 is a match for reference ADR07, called the Lowering Rear Reaction Rods. Ducabike documents ADR07 in its catalogue, and the Panigale V4 R is part of that documentation. Below, Inter-Pace summarises the manufacturer's data on ADR07 without adding claims of its own, with the Panigale V4 R as reference point.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eLowers the rear by 16 mm compared with stock height\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eFits in place of the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Panigale V4 R, 2019-2024\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Tips\u003c\/h2\u003e\u003cp\u003eExchange the original rear reaction rods on the rear suspension linkage for ADR07, following the usual workshop practice. Where the original rear reaction rods sat on the rear suspension linkage, ADR07 now does the job. Inside the package is the full set that makes up ADR07. A specialist workshop has the tools and experience to fit safety-related parts such as ADR07 correctly. Wrong installation of safety-relevant parts can have serious consequences; leave ADR07 to professionals if in doubt. A torque wrench helps you tighten the fixings of ADR07 correctly. Fitting instructions as PDF: see the Downloads tab for ADR07.\u003c\/p\u003e\u003ch2\u003eColour Range\u003c\/h2\u003e\u003cp\u003eDucabike offers ADR07 in black and red; use the selector on this page to choose.\u003c\/p\u003e\u003ch2\u003eCompatibility Notes\u003c\/h2\u003e\u003cp\u003eThe listed application of ADR07 is the Ducati Panigale V4 R, 2019-2024, according to Ducabike. Special editions of the Panigale V4 R may differ, so compare their details with Ducabike's fitment before ordering. Before you order, confirm that the year of your Panigale V4 R lies in 2019-2024. Ducabike's fitment list for ADR07 also includes Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 S, each with its own page here. Ducabike's fitment data for ADR07 are the basis of this page; Inter-Pace can explain them if needed.\u003c\/p\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eADR07 lowers the rear of the motorcycle by 16 mm compared with the standard height. ADR07 replaces the original reaction rods as a plug and play kit with all small parts.\u003c\/p\u003e\u003ch2\u003eCare Notes\u003c\/h2\u003e\u003cp\u003eTreat ADR07 like the paintwork of your motorcycle: gently and with mild products. Inspect ADR07 from time to time, and always after the motorcycle has fallen over or taken a knock. Look at ADR07 during your regular checks of the motorcycle; small issues are easier to deal with early.\u003c\/p\u003e\u003ch2\u003eThe Material\u003c\/h2\u003e\u003cp\u003eFrom small fittings to larger brackets, aluminium is a material Ducabike knows well, and ADR07 is made from it. With aluminium as its material, ADR07 adds little weight to the motorcycle. Years of making motorcycle accessories have shaped how Ducabike handles aluminium, and ADR07 benefits from it.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003ePaperwork for road approval is not available for ADR07 from Ducabike. Changes to a motorcycle can affect its operating licence, depending on national law. The rules for using ADR07 on public roads are set by the authorities in your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 R (2019-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112346112266,"sku":"ADR07D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112346145034,"sku":"ADR07A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr07d_1.png?v=1794458792"},{"product_id":"ducabike-lowering-rear-reaction-rods-ducati-panigale-v4-s-2018-2020-adr07","title":"Ducabike Lowering Rear Reaction Rods Ducati Panigale V4 S (2018-2020) – ADR07","description":"\u003cp\u003eHere you find Ducabike's Lowering Rear Reaction Rods, reference ADR07, assigned to the Ducati Panigale V4 S (2018-2020). In Ducabike's catalogue, ADR07 shows up under the Panigale V4 S as well as under its part number. Questions about ADR07 on the Panigale V4 S are answered in the sections on material, delivery, fitment and approval.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eLowers the rear by 16 mm compared with stock height\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eFits in place of the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale V4 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterials Used\u003c\/h2\u003e\u003cp\u003eLight, workable and resistant to the weather, aluminium is the material Ducabike picked for ADR07. Aluminium allows Ducabike to give ADR07 a slim, precise shape without excess material. Material quality and careful processing go together on ADR07, from the raw aluminium to the finished part.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eOnce fitted, ADR07 stands in for the original rear reaction rods on the rear suspension linkage. The original mounting on the rear suspension linkage is reused when ADR07 replaces the original rear reaction rods. The ADR07 set is delivered complete, as compiled by Ducabike. If you notice play, noises or unusual behaviour after fitting ADR07, stop and have it checked. Retightening the fixings of ADR07 once the first kilometres are behind you is part of the job. Once ADR07 is in place, step back and check that it sits straight and even. The manufacturer's PDF for ADR07 sits in the Downloads tab, ready to open.\u003c\/p\u003e\u003ch2\u003eColour Range\u003c\/h2\u003e\u003cp\u003eChoose ADR07 in black and red according to your own style or to match other parts.\u003c\/p\u003e\u003ch2\u003eCompatibility Notes\u003c\/h2\u003e\u003cp\u003eBased on Ducabike's data, ADR07 is intended for the 2018-2020 Ducati Panigale V4 S. Fitment refers to the Ducati Panigale V4 S as delivered by the factory; earlier modifications can change the situation. Production years outside 2018-2020 have not been confirmed by Ducabike for the Panigale V4 S. Physically identical, ADR07 is also sold for Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 R on their own pages. Keep ADR07 at hand for later orders or questions; it is the unique Ducabike reference.\u003c\/p\u003e\u003ch2\u003eDesigned Purpose\u003c\/h2\u003e\u003cp\u003eWith ADR07 fitted, the rear sits 16 mm lower than with the original reaction rods. Ducabike supplies ADR07 with every small part needed, so the original rods can be swapped directly.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003eFuel and oil splashes should be wiped off ADR07 promptly with a moist cloth. Covering the motorcycle loosely allows moisture to escape, which is good for ADR07. Riding through mud or gravel? Rinse ADR07 afterwards before the dirt hardens.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eAs things stand, Ducabike offers no ABE or test report for ADR07. Before a vehicle inspection, it is worth asking in advance how ADR07 will be judged. Rules for accessories without approval papers can change, so check the current situation for ADR07.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112346669322,"sku":"ADR07D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112346702090,"sku":"ADR07A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr07d_1.png?v=1794458792"},{"product_id":"ducabike-rear-reaction-rods-ducati-streetfighter-v4-2020-2024-adr08","title":"Ducabike Rear Reaction Rods Ducati Streetfighter V4 (2020-2024) – ADR08","description":"\u003cp\u003eFrom Ducabike in Italy: the Rear Reaction Rods ADR08, listed for the Ducati Streetfighter V4 (2020-2024). Choose by number, not by guesswork: for the Streetfighter V4, the Ducabike reference is ADR08. Should you own the Streetfighter V4, you can use the sections below to check ADR08 point by point.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eRear ride height stays unchanged\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eReplaces the original rear reaction rods, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Streetfighter V4, 2020-2024\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Overview\u003c\/h2\u003e\u003cp\u003eDucabike offers ADR08 in black and red; use the selector on this page to choose.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycles\u003c\/h2\u003e\u003cp\u003eMatching ADR08 to the 2020-2024 Ducati Streetfighter V4 is Ducabike's own specification, not an estimate. Year and model must both match before you order: Ducati Streetfighter V4, 2020-2024. Your Streetfighter V4 should match the listing in both name and year before you order. For riders of Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S, separate ADR08 listings are available in the shop. Ducabike's fitment data for ADR08 are the basis of this page; Inter-Pace can explain them if needed. Ducabike lists ADR08 as an end-of-production item that is available only while stocks last.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eTaking out the original rear reaction rods on the rear suspension linkage makes room for ADR08. The position on the rear suspension linkage stays the same, and ADR08 is fitted instead of the original rear reaction rods. ADR08 is supplied as a set made up of several parts. If you notice play, noises or unusual behaviour after fitting ADR08, stop and have it checked. Every part that is loosened during fitting of ADR08 must be tightened again before the ride. A clean thread runs freely by hand for the first few turns; if not, find out why before continuing. Under Downloads you can save the installation PDF for ADR08 to your phone or computer.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eChange the cloth or rinse it often while cleaning ADR08, so that collected grit does not scratch. A charger cable or tie-down strap resting on ADR08 can leave marks over time. Riding through mud or gravel? Rinse ADR08 afterwards before the dirt hardens.\u003c\/p\u003e\u003ch2\u003eMaterials Used\u003c\/h2\u003e\u003cp\u003eAluminium suits ADR08 because it is light, workable and naturally resistant to corrosion. Aluminium responds well to surface treatments, so the finish of ADR08 can be applied evenly. Ducabike pairs the aluminium of ADR08 with a careful finish, so the part looks tidy from every angle.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003eFitting ADR08 leaves the rear height unchanged, as Ducabike states, while the stock tie rods come out. Ducabike supplies ADR08 as a plug and play kit that includes every small part needed.\u003c\/p\u003e\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\u003cp\u003eDucabike offers ADR08 without German road approval documents. Some authorities accept individual inspections for parts like ADR08; ask a testing body. Depending on where you live, fitting ADR08 may require an inspection or an entry in the papers.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112348438794,"sku":"ADR08D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112348471562,"sku":"ADR08A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr08d_1.png?v=1794458858"},{"product_id":"ducabike-rear-reaction-rods-ducati-streetfighter-v4-s-2020-2024-adr08","title":"Ducabike Rear Reaction Rods Ducati Streetfighter V4 S (2020-2024) – ADR08","description":"\u003cp\u003eThe Ducati Streetfighter V4 S (2020-2024) gets its own Ducabike listing here: the Rear Reaction Rods, number ADR08. Each section that follows looks at ADR08 from a different angle, always for the Streetfighter V4 S. The aim of this page is simple: to show whether ADR08 is the right Ducabike item for your Streetfighter V4 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eRear ride height stays unchanged\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eFits in place of the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003ePDF fitting instructions in the Downloads tab\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColours on Offer\u003c\/h2\u003e\u003cp\u003eThe visual effect of ADR08 depends on the colour you choose from black and red.\u003c\/p\u003e\u003ch2\u003eCare and Storage\u003c\/h2\u003e\u003cp\u003eUse polishes only if they suit the aluminium used in ADR08. If you find marks on the aluminium of ADR08, ask Inter-Pace before trying any repair yourself. Regular cleaning helps the aluminium of ADR08 stay attractive for longer.\u003c\/p\u003e\u003ch2\u003eInstallation Tips\u003c\/h2\u003e\u003cp\u003eWhere the original rear reaction rods sat on the rear suspension linkage, ADR08 now does the job. To change over, remove the original rear reaction rods on the rear suspension linkage and install ADR08. ADR08 consists of several parts that Ducabike supplies together as a kit. Your safety depends on correct fitting, so take no shortcuts with ADR08. If you notice play, noises or unusual behaviour after fitting ADR08, stop and have it checked. Bring the fixings of ADR08 up to tension evenly, in several passes, working crosswise where possible. Downloads tab: Ducabike instructions for ADR08 in PDF format.\u003c\/p\u003e\u003ch2\u003eChecking Fitment\u003c\/h2\u003e\u003cp\u003eThe fitment of ADR08 covers the Ducati Streetfighter V4 S (2020-2024) according to the Italian manufacturer. Have your registration certificate at hand and compare its entries with the Ducati Streetfighter V4 S and 2020-2024. Fitment is specific to the Ducati Streetfighter V4 S; please do not order for a different motorcycle. The Ducabike number ADR08 covers Ducati Streetfighter V4, Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S too, offered as separate products. When in doubt about ADR08, ask first and order afterwards. Ducabike lists ADR08 as an end-of-production item that is available only while stocks last.\u003c\/p\u003e\u003ch2\u003eFrom the Material Up\u003c\/h2\u003e\u003cp\u003eDucabike relies on aluminium for ADR08, a material well proven in motorcycle parts. Metal parts on a motorcycle face rain, road dirt and vibration; the aluminium of ADR08 is suited to those conditions. With aluminium as its basis, ADR08 is made for regular use rather than for display only.\u003c\/p\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eFitting ADR08 leaves the rear height unchanged, as Ducabike states, while the stock tie rods come out. ADR08 comes with all the small parts required, so the swap needs no extra hardware.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003eRegarding approval, ADR08 comes without documents from the manufacturer. Make sure the use of ADR08 complies with your local road traffic regulations. Keep any assessment or entry for ADR08 together with your vehicle documents.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112348930314,"sku":"ADR08D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112348963082,"sku":"ADR08A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr08d_1.png?v=1794458858"},{"product_id":"ducabike-rear-reaction-rods-ducati-panigale-v4-2018-2019-adr08","title":"Ducabike Rear Reaction Rods Ducati Panigale V4 (2018-2019) – ADR08","description":"\u003cp\u003eDucabike gives its Rear Reaction Rods the number ADR08 and assigns that number to the 2018-2019 Ducati Panigale V4. Ducabike develops its accessories in Italy, and the Panigale V4 is one of the motorcycles the company has drawn up ADR08 for. Ducabike's work centres on parts for specific motorcycles, and for the Panigale V4 that includes ADR08.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eRear ride height stays unchanged\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale V4 (2018-2019)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill It Fit Your Bike?\u003c\/h2\u003e\u003cp\u003eThe Ducabike reference ADR08 goes with the Ducati Panigale V4 (2018-2019), as shown in the manufacturer's list. Fitment is only stated for the Ducati Panigale V4 built 2018-2019; earlier or later years are not covered. Ordering is straightforward once you have confirmed the Panigale V4 and its build year. A look at the Ducabike list for ADR08 shows Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4 R, Ducati Panigale V4 S as further applications. Doubts about ADR08? Send Inter-Pace model, version and year, which is usually enough to clear them up. Ducabike lists ADR08 as an end-of-production item that is available only while stocks last.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eThe intended position of ADR08 is on the rear suspension linkage, where it supersedes the original rear reaction rods. The installation point on the rear suspension linkage remains, but ADR08 is used there instead of the original rear reaction rods. The kit ADR08 brings together the pieces Ducabike provides for this application. Follow the motorcycle manufacturer's specifications for all fixings connected with ADR08. Before riding off, make sure nothing has been left loose in the area of ADR08. Fit ADR08 in a dry place, out of wind and dust. A PDF document from Ducabike, found in the Downloads tab, covers the fitting of ADR08.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThink about the colours already on your motorcycle before choosing ADR08 in black and red.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made Of\u003c\/h2\u003e\u003cp\u003eMetal parts on a motorcycle face rain, road dirt and vibration; the aluminium of ADR08 is suited to those conditions. Light alloy construction is a hallmark of Ducabike accessories, and ADR08 follows that approach. Ducabike pairs the aluminium of ADR08 with a careful finish, so the part looks tidy from every angle.\u003c\/p\u003e\u003ch2\u003eUse on the Motorcycle\u003c\/h2\u003e\u003cp\u003eADR08 replaces the original tie rods while the rear ride height stays exactly as before. ADR08 comes with all the small parts required, so the swap needs no extra hardware.\u003c\/p\u003e\u003ch2\u003eCleaning\u003c\/h2\u003e\u003cp\u003eAir drying is fine, but a soft towel avoids water spots on ADR08. Keep fuel, oil and solvents away from ADR08; if contact occurs, clean the area promptly. Condensation can form in cold garages; a dry, ventilated space suits ADR08 better.\u003c\/p\u003e\u003ch2\u003eLegal Notes\u003c\/h2\u003e\u003cp\u003eThe manufacturer's paperwork for ADR08 does not include an ABE. Outside Germany, other inspection bodies and rules apply to ADR08. Some countries require modifications to be recorded; find out whether this applies to ADR08.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 (2018-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112349552906,"sku":"ADR08D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112349585674,"sku":"ADR08A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr08d_1.png?v=1794458858"},{"product_id":"ducabike-rear-reaction-rods-ducati-panigale-v4-r-2019-2024-adr08","title":"Ducabike Rear Reaction Rods Ducati Panigale V4 R (2019-2024) – ADR08","description":"\u003cp\u003eIf you ride the Ducati Panigale V4 R (2019-2024), this page shows the matching Ducabike item: ADR08, the Rear Reaction Rods. Read on for material, delivery contents, fitment and approval notes on ADR08 for the Panigale V4 R. Ducabike documents ADR08 in its catalogue, and the Panigale V4 R is part of that documentation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eRear ride height stays unchanged\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eFits in place of the original rear reaction rods\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Panigale V4 R, 2019-2024\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eDucabike matches ADR08 to the Ducati Panigale V4 R produced 2019-2024. Fitment is specific to the Ducati Panigale V4 R; please do not order for a different motorcycle. A quick look at the registration papers confirms whether you own the 2019-2024 Ducati Panigale V4 R. Ducabike sells the same part under ADR08 for Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 S, and Inter-Pace lists each one separately. ADR08 identifies this exact Ducabike item, which makes any enquiry straightforward. Ducabike lists ADR08 as an end-of-production item that is available only while stocks last.\u003c\/p\u003e\u003ch2\u003eFunction and Details\u003c\/h2\u003e\u003cp\u003eADR08 replaces the original tie rods while the rear ride height stays exactly as before. ADR08 comes with all the small parts required, so the swap needs no extra hardware.\u003c\/p\u003e\u003ch2\u003eDelivery and Installation\u003c\/h2\u003e\u003cp\u003eTo fit ADR08, remove the original rear reaction rods on the rear suspension linkage beforehand. Ducabike sees ADR08 as a like-for-like stand-in for the original rear reaction rods on the rear suspension linkage. Ducabike packs the parts of ADR08 together as one kit. Never ride with loose or missing fixings on ADR08. Uncertain whether ADR08 sits right? Then the motorcycle stays off the road until a mechanic has looked at it. Quality hex bits and a proper ratchet make the work on ADR08 cleaner and safer. Reading the Downloads PDF first helps you judge whether to fit ADR08 yourself.\u003c\/p\u003e\u003ch2\u003eCleaning and Care\u003c\/h2\u003e\u003cp\u003eCleaning ADR08 regularly is easier than removing old, baked-on dirt. Avoid parking where sprinklers or drips from roofs can reach ADR08 again and again. Should ADR08 show signs of wear or damage, contact Inter-Pace about a replacement.\u003c\/p\u003e\u003ch2\u003eConstruction\u003c\/h2\u003e\u003cp\u003eUnlike plastic, the aluminium of ADR08 keeps a metallic look and feel. A light alloy such as the one used for ADR08 is easy to handle during fitting and adds hardly any load to the motorcycle. A well-made part shows its quality in the details, and ADR08 is finished with that in mind.\u003c\/p\u003e\u003ch2\u003eYour Colour\u003c\/h2\u003e\u003cp\u003eAccording to the product data, the colour of ADR08 is listed as black and red.\u003c\/p\u003e\u003ch2\u003eLegal Situation\u003c\/h2\u003e\u003cp\u003eAn ABE, a parts certificate or a comparable document for ADR08 is not provided by Ducabike. Regulations differ between countries, which is why Inter-Pace cannot give a general statement on ADR08. Clarify with the responsible authority whether an entry for ADR08 in the vehicle documents is necessary.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 R (2019-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112349913354,"sku":"ADR08D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112349946122,"sku":"ADR08A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr08d_1.png?v=1794458858"},{"product_id":"ducabike-rear-reaction-rods-ducati-panigale-v4-s-2018-2020-adr08","title":"Ducabike Rear Reaction Rods Ducati Panigale V4 S (2018-2020) – ADR08","description":"\u003cp\u003eIn the Ducabike range, ADR08 stands for the Rear Reaction Rods matched to the Ducati Panigale V4 S (2018-2020). Ducabike accessories are made to be ordered by number, and for the Ducati Panigale V4 S this is ADR08. Owners who like to know the facts first will find the essentials on ADR08 for the Panigale V4 S right here.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eRear ride height stays unchanged\u003c\/li\u003e\n\u003cli\u003eSteel screws included\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary small parts\u003c\/li\u003e\n\u003cli\u003ePlug and play kit\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eReplaces the original rear reaction rods, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Panigale V4 S, 2018-2020\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility Check\u003c\/h2\u003e\u003cp\u003eADR08 has the Ducati Panigale V4 S (2018-2020) on its Ducabike fitment list. Please place an order only when you are certain your motorcycle is a 2018-2020 Ducati Panigale V4 S. If your registration shows a different variant than the Ducati Panigale V4 S, choose the corresponding listing instead. Ducabike's fitment list for ADR08 also includes Ducati Streetfighter V4, Ducati Streetfighter V4 S, Ducati Panigale V4, Ducati Panigale V4 R, each with its own page here. Please contact Inter-Pace with ADR08 if the fitting area on your motorcycle looks different from the photos. Ducabike lists ADR08 as an end-of-production item that is available only while stocks last.\u003c\/p\u003e\u003ch2\u003eWhat to Expect\u003c\/h2\u003e\u003cp\u003eADR08 replaces the original tie rods while the rear ride height stays exactly as before. Ducabike supplies ADR08 as a plug and play kit that includes every small part needed.\u003c\/p\u003e\u003ch2\u003eCare at a Glance\u003c\/h2\u003e\u003cp\u003eGentle movements with a soft cloth are enough to keep ADR08 clean. A charger cable or tie-down strap resting on ADR08 can leave marks over time. Transport the motorcycle with straps placed well away from ADR08.\u003c\/p\u003e\u003ch2\u003eHow to Fit\u003c\/h2\u003e\u003cp\u003eTo fit ADR08, remove the original rear reaction rods on the rear suspension linkage beforehand. Mounting ADR08 on the rear suspension linkage means saying goodbye to the original rear reaction rods. You do not need to order components of ADR08 separately; they come as a set. Work on safety-relevant components like ADR08 demands concentration and the right tools. Recheck the tightness of ADR08 after the first ride and again after a few hundred kilometres. Screws that go into aluminium threads should never be overtightened. For the details of fitting ADR08, refer to the PDF under Downloads.\u003c\/p\u003e\u003ch2\u003eQuality of Material\u003c\/h2\u003e\u003cp\u003eIn aluminium, ADR08 can be shaped with precise contours and crisp details. Aluminium alloys are a common choice for motorcycle accessories because they stay light without becoming fragile. Material and workmanship together decide how ADR08 ages, and Ducabike pays attention to both.\u003c\/p\u003e\u003ch2\u003eColours on Offer\u003c\/h2\u003e\u003cp\u003eA colour that matches the frame, wheels or bodywork makes ADR08 look at home; Ducabike offers black and red.\u003c\/p\u003e\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\u003cp\u003eThe manufacturer's paperwork for ADR08 does not include an ABE. What is permitted in one country may not be permitted in another, so check locally for ADR08. Find out before fitting ADR08 what your national regulations require.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e ADR08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112350568714,"sku":"ADR08D","price":143.19,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112350601482,"sku":"ADR08A","price":143.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-adr08d_1.png?v=1794458858"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-panigale-v4-2020-2024-tr100-02","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Panigale V4 (2020-2024) – TR100_02","description":"\u003cp\u003eHere you will find TR100_02 from CNC Racing, described as Lowering Tie Rods for Rear Shock Absorber; the Ducati Panigale V4 (2020-2024) is its listed fitment. You will find all information on TR100_02 for your Panigale V4 in one place on this page. This text helps you decide whether TR100_02 meets your plans for the Panigale V4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 13 mm\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eFits in place of the original tie rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSelecting a Colour\u003c\/h2\u003e\u003cp\u003eThe colour range of TR100_02 covers black and red.\u003c\/p\u003e\u003ch2\u003eMaterial Facts\u003c\/h2\u003e\u003cp\u003eCNC Racing produces TR100_02 in aluminium, a light metal with good strength for its weight. Aluminium gives TR100_02 a low weight compared with steel parts of similar size. From design to finish, TR100_02 is produced with consistency.\u003c\/p\u003e\u003ch2\u003eFitting Information\u003c\/h2\u003e\u003cp\u003eInstead of the original tie rods, TR100_02 is used on the rear suspension linkage. In place of the original tie rods, you mount TR100_02 on the rear suspension linkage. Two components make up the delivery of TR100_02. Leave fitting TR100_02 to a workshop if you are not experienced with motorcycle mechanics. Screws on TR100_02 can settle during the first kilometres; check and retighten them. Clean threads make it easier to fit TR100_02 correctly. Clean the contact surfaces before TR100_02 is mounted.\u003c\/p\u003e\u003ch2\u003eMatching Your Bike\u003c\/h2\u003e\u003cp\u003eAs specified by CNC Racing, TR100_02 fits the Ducati Panigale V4 (2020-2024). The registration certificate of your Panigale V4 lists the details you need for this comparison. Bikes registered later than they were built can confuse matters; what counts for your Panigale V4 is the production date. Additional motorcycles in the TR100_02 fitment: Ducati Panigale V4 S. Quoting TR100_02 in your message speeds up any fitment check. With TR100_02 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eFunction Overview\u003c\/h2\u003e\u003cp\u003eTR100_02 is a pair of tie rods for the rear linkage that lowers the seat height by 13 mm compared with the originals. Assembly of TR100_02 needs no modification, as the screws and nuts are supplied.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eSoft cloths and neutral cleaners are all TR100_02 needs for routine care. After washing, check that no water remains trapped around TR100_02. Keep an eye on TR100_02 after any tip-over in the garage.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eCNC Racing has not issued type approval documents for TR100_02. Check with a testing centre before you ride on the road with TR100_02. Riders outside Germany should check national rules for TR100_02 as well.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR100_02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54155717443850,"sku":"TR100B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54155717476618,"sku":"TR100R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-tr100b-einzel6-v2_701dccfa-c575-4437-9ba3-df4c947086b9.png?v=1795100796"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-brutale-675-2012-2015-psb06","title":"CNC Racing Bottom Yoke MV Agusta Brutale 675 (2012-2015) – PSB06","description":"\u003cp\u003eReference PSB06 stands for the CNC Racing Bottom Yoke that the maker assigns to the MV Agusta Brutale 675 built 2012-2015. The following sections cover material, fitting, care and legal points for PSB06 on the Brutale 675. PSB06 has been assigned to the Brutale 675 by CNC Racing, and the details follow below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the MV Agusta Brutale 675 (2012-2015)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eCNC Racing shapes PSB06 out of aluminium by CNC machining. In PSB06, CNC Racing uses aluminium, a metal that handles everyday loads on a motorcycle well. The quality of PSB06 starts with the aluminium and continues in the details.\u003c\/p\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003eCNC Racing produces PSB06 in black.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eAvoid aggressive solvents near PSB06; they can attack the surface. Protect PSB06 from contact with sharp tools during other work on the motorcycle. Damage to PSB06 after a crash should be assessed by a specialist.\u003c\/p\u003e\u003ch2\u003eFitment at a Glance\u003c\/h2\u003e\u003cp\u003ePSB06 has been made to suit the MV Agusta Brutale 675 (2012-2015), as stated by CNC Racing. Model year and build date of a motorcycle can differ, so check both on your Brutale 675. If you are unsure whether your Brutale 675 is covered, contact us with its registration details. Inter-Pace splits PSB06 into one page per motorcycle, including MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR, MV Agusta F3 675. Should the fitment of PSB06 differ from the information here, please tell us.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003ePSB06 increases front-end rigidity while reducing weight compared with the stock component. PSB06 matches the inclination angle of the original plates, so it is installed directly with no changes to the steering geometry.\u003c\/p\u003e\u003ch2\u003eFitting Safely\u003c\/h2\u003e\u003cp\u003ePSB06 sits on the steering head in place of the original bottom yoke. PSB06 substitutes the original bottom yoke on the steering head. CNC Racing delivers PSB06 as one piece. The function of PSB06 must be checked thoroughly before the first ride. Before riding, check that PSB06 is firmly attached and moves freely where it should. Tightening values for PSB06 should come from the vehicle manufacturer's data. Proper fitting of PSB06 requires clean and undamaged mounting points.\u003c\/p\u003e\u003ch2\u003eHomologation\u003c\/h2\u003e\u003cp\u003eCNC Racing supplies PSB06 without approval paperwork. For road use of PSB06, the laws of the country of registration apply. Riders outside Germany should check national rules for PSB06 as well.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 675 (2012-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313155850,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-brutale-800-2012-2015-psb06","title":"CNC Racing Bottom Yoke MV Agusta Brutale 800 (2012-2015) – PSB06","description":"\u003cp\u003eFor owners of the MV Agusta Brutale 800 (2012-2015), CNC Racing offers the Bottom Yoke under number PSB06. The sections that follow keep to facts: what PSB06 is, how it fits the Brutale 800 and how to look after it. Delivery contents, fitting notes and approval status of PSB06 on the Brutale 800 are covered below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eFits in place of the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eMade to fit the MV Agusta Brutale 800 (2012-2015)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eLight soiling on PSB06 can be removed with a mild detergent solution. A visual check of PSB06 before each ride takes only a moment. Damage to PSB06 after a crash should be assessed by a specialist.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eDepending on stock, PSB06 is available in black.\u003c\/p\u003e\u003ch2\u003eIts Job\u003c\/h2\u003e\u003cp\u003ePSB06 increases front-end rigidity while reducing weight compared with the stock component. PSB06 matches the inclination angle of the original plates, so it is installed directly with no changes to the steering geometry.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003ePSB06 is meant for the MV Agusta Brutale 800 manufactured 2012-2015. Owners should verify that their Brutale 800 is in standard form where PSB06 is mounted. Different markets sometimes received different versions of the Brutale 800; the type code helps to tell them apart. Owners of MV Agusta Brutale 675, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR, MV Agusta F3 675 can use the same PSB06, listed on its own page. Your registration document and the reference PSB06 are all we need to confirm fitment.\u003c\/p\u003e\u003ch2\u003eContents and Fitting\u003c\/h2\u003e\u003cp\u003eAs a replacement part, PSB06 goes on instead of the original bottom yoke on the steering head. PSB06 is fitted on the steering head, taking the role of the original bottom yoke. PSB06 reaches you as one individual part. Set off only when PSB06 has been fitted properly and works correctly. Professional workshops bring the right equipment and routine to fit PSB06 correctly. Some experience with motorcycle mechanics is useful for installing PSB06. Handle PSB06 carefully before fitting to avoid scratches.\u003c\/p\u003e\u003ch2\u003eAbout Construction\u003c\/h2\u003e\u003cp\u003eAluminium forms the body of PSB06 and keeps the weight low. PSB06 is an aluminium part, lighter than a comparable steel component. The way PSB06 is finished matches the quality of its aluminium.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eApproval papers, whether ABE or parts certificate, are not provided by CNC Racing for PSB06. Find out about the requirements for PSB06 in your country before road use. Check with a testing centre before you ride on the road with PSB06.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 800 (2012-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313352458,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-brutale-800-rr-2015-2016-psb06","title":"CNC Racing Bottom Yoke MV Agusta Brutale 800 RR (2015-2016) – PSB06","description":"\u003cp\u003eThis listing covers CNC Racing article PSB06 (Bottom Yoke) in the version for the MV Agusta Brutale 800 RR, 2015-2016. Here we set out the essentials of PSB06 for your Brutale 800 RR in plain terms. CNC Racing builds its range around specific models, the Brutale 800 RR included, and PSB06 is one result.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: MV Agusta Brutale 800 RR (2015-2016)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance Tips\u003c\/h2\u003e\u003cp\u003ePlain water with a drop of neutral cleaner removes everyday dirt from PSB06. Long periods outdoors in sun and rain can age the surface of PSB06. Replace PSB06 if it is bent or cracked rather than straightening it.\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eCompared with the original, PSB06 is lighter and adds rigidity at the front end. Because it keeps the stock inclination angle, PSB06 can be fitted without altering the steering geometry.\u003c\/p\u003e\u003ch2\u003eColour Range\u003c\/h2\u003e\u003cp\u003eThe selector on this page offers PSB06 in black.\u003c\/p\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eCNC Racing chose aluminium for PSB06, combining low weight with sufficient strength. Choosing aluminium for PSB06 allows CNC Racing to keep the part light. Each detail of PSB06 is finished with care.\u003c\/p\u003e\u003ch2\u003eInstalling It\u003c\/h2\u003e\u003cp\u003eInstead of the original bottom yoke, PSB06 is used on the steering head. Your motorcycle receives PSB06 on the steering head in exchange for the original bottom yoke. The scope of delivery of PSB06 is one part. Correct function of PSB06 is essential for safe riding; test it carefully. Ensure that PSB06 does not restrict any movement of controls or chassis. Handle PSB06 carefully before fitting to avoid scratches. A little assembly paste on the threads can make later removal of PSB06 easier.\u003c\/p\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eFitment as stated by the maker: PSB06 on the MV Agusta Brutale 800 RR, 2015-2016. Every detail counts: name, variant and build year of your MV Agusta Brutale 800 RR should all match. If several versions of the Brutale 800 RR exist, the version stated in your papers is the one that counts. Apart from the bike named here, PSB06 is also listed for MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Dragster 800 RR, MV Agusta F3 675. The CNC Racing website lists the applications of PSB06 as well, should you want a second source.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eThere is no approval document for PSB06 from CNC Racing. Ask your inspection centre whether PSB06 needs an individual assessment. In Germany, an inspection by an approved testing body may allow PSB06 to be entered in the vehicle papers.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 800 RR (2015-2016)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313516298,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-dragster-800-rr-2015-2017-psb06","title":"CNC Racing Bottom Yoke MV Agusta Dragster 800 RR (2015-2017) – PSB06","description":"\u003cp\u003eOnce fitted, PSB06 gives the MV Agusta Dragster 800 RR (2015-2017) the Bottom Yoke as CNC Racing supplies it. Further down you can read which material CNC Racing chose for PSB06 and how it goes on the Dragster 800 RR. CNC Racing documents PSB06 per motorcycle, and the following sections apply to the Dragster 800 RR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFits in place of the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: MV Agusta Dragster 800 RR (2015-2017)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eMade from aluminium, PSB06 puts hardly any extra weight on the motorcycle. PSB06 is produced in aluminium, a metal that resists corrosion well when finished properly. Processing of the aluminium in PSB06 is done with care, from raw stock to finished part.\u003c\/p\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003eCNC Racing states that PSB06 suits the MV Agusta Dragster 800 RR (2015-2017). If you are unsure whether your Dragster 800 RR is covered, contact us with its registration details. The production period of the MV Agusta Dragster 800 RR named here is 2015-2017; check that yours falls within it. Inter-Pace splits PSB06 into one page per motorcycle, including MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta F3 675. We are glad to compare PSB06 with the parts currently fitted to your motorcycle.\u003c\/p\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eMounted on the steering head, PSB06 is used in lieu of the original bottom yoke. Your motorcycle receives PSB06 on the steering head in exchange for the original bottom yoke. Delivery of PSB06 consists of one piece. Once you have covered the first kilometres, retighten every fixing of PSB06. We advise a professional installation of PSB06. Handle PSB06 carefully before fitting to avoid scratches. Hand-tighten the fixings of PSB06 first, then tighten to the specified value.\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003ePSB06 increases front-end rigidity while reducing weight compared with the stock component. Because it keeps the stock inclination angle, PSB06 can be fitted without altering the steering geometry.\u003c\/p\u003e\u003ch2\u003eCare Advice\u003c\/h2\u003e\u003cp\u003eHigh-pressure cleaners should not be aimed directly at PSB06. Leaving the motorcycle in direct sun for long periods can fade surfaces, including PSB06. Check PSB06 for firm fit from time to time, especially after long rides.\u003c\/p\u003e\u003ch2\u003eShades on Offer\u003c\/h2\u003e\u003cp\u003eSelect black when ordering PSB06.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eCNC Racing holds no ABE for PSB06. Whether an individual inspection of PSB06 is possible depends on the testing body. Competent authorities in your country can answer questions about PSB06 and road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Dragster 800 RR (2015-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313680138,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-f3-675-2012-2020-psb06","title":"CNC Racing Bottom Yoke MV Agusta F3 675 (2012-2020) – PSB06","description":"\u003cp\u003eCNC Racing has assigned item PSB06 (Bottom Yoke) to its fitment list for the MV Agusta F3 675, produced 2012-2020. A clear overview of PSB06 for the F3 675 follows: construction, scope, fitting and care. Details about how PSB06 is built and how it goes onto the F3 675 are listed further down.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: MV Agusta F3 675, 2012-2020\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGetting It Mounted\u003c\/h2\u003e\u003cp\u003eUnbolt the original bottom yoke on the steering head and fit PSB06 instead. In place of the original bottom yoke, you mount PSB06 on the steering head. Supplied quantity of PSB06: one piece. Leave fitting PSB06 to a workshop if you are not experienced with motorcycle mechanics. Correct function of PSB06 is essential for safe riding; test it carefully. Fit PSB06 with the motorcycle cold, so that you do not burn yourself on hot parts. Where PSB06 has several fixings, tighten them crosswise and in stages.\u003c\/p\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003eThe MV Agusta F3 675 (2012-2020) is the motorcycle this PSB06 listing refers to. Look at the year of manufacture of your F3 675 and check it against 2012-2020. Imported bikes can differ from the European F3 675; compare the type code if in doubt. Look for PSB06 under your model name if your motorcycle is listed here: MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR. If you ride a modified motorcycle, mention it when you ask about PSB06.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003ePSB06 stays presentable with regular, gentle cleaning. Spare a minute for PSB06 during each service interval. Visible damage to the aluminium of PSB06 means the part should be replaced.\u003c\/p\u003e\u003ch2\u003eBehind the Material\u003c\/h2\u003e\u003cp\u003eCNC Racing chose aluminium for PSB06, combining low weight with sufficient strength. Made from aluminium, PSB06 puts hardly any extra weight on the motorcycle. Fine finishing gives PSB06 its final appearance.\u003c\/p\u003e\u003ch2\u003eWorking Principle\u003c\/h2\u003e\u003cp\u003eCompared with the original, PSB06 is lighter and adds rigidity at the front end. PSB06 matches the inclination angle of the original plates, so it is installed directly with no changes to the steering geometry.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eThe version of PSB06 in black can be selected above.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eCNC Racing has no registration papers for PSB06. Track use and road use of PSB06 can be treated differently by law. On closed circuits, road approval rules generally do not apply to PSB06.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta F3 675 (2012-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313712906,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-f3-800-2013-2025-psb06","title":"CNC Racing Bottom Yoke MV Agusta F3 800 (2013-2025) – PSB06","description":"\u003cp\u003eRiding the MV Agusta F3 800 (2013-2025)? Then PSB06, the Bottom Yoke from CNC Racing, is matched to your motorcycle. Fitment details for the F3 800, delivery contents and care advice for PSB06 follow in the sections below. CNC Racing is a maker of motorcycle accessories, and PSB06 is part of its programme for the F3 800.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eFits in place of the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eMade to fit the MV Agusta F3 800 (2013-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003ePSB06 goes on the MV Agusta F3 800 (2013-2025), as confirmed by CNC Racing's application data. We recommend checking the frame number or type code of your F3 800 against the manufacturer data. The year of manufacture matters: PSB06 is assigned to the MV Agusta F3 800 built 2013-2025. CNC Racing's fitment list for PSB06 goes on to name MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR. Fitment information for PSB06 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it.\u003c\/p\u003e\u003ch2\u003eManufacturing\u003c\/h2\u003e\u003cp\u003eAluminium is the material of choice for PSB06 because it is light and dimensionally stable. Aluminium alloy is what PSB06 is made of. Choosing aluminium for PSB06 reflects what the part has to do.\u003c\/p\u003e\u003ch2\u003eCare Advice\u003c\/h2\u003e\u003cp\u003eSoft cloths and neutral cleaners are all PSB06 needs for routine care. Regular inspection of PSB06 is part of responsible motorcycle care. Keep chemicals away from PSB06 when using cleaning products on other parts.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eTo match other parts, PSB06 is offered in black.\u003c\/p\u003e\u003ch2\u003eFitting and Contents\u003c\/h2\u003e\u003cp\u003eAfter removing the original bottom yoke on the steering head, PSB06 is fitted. The job: take off the original bottom yoke on the steering head and put PSB06 on. A single part is included with PSB06. Test every function connected to PSB06 while stationary before setting off. The function of PSB06 must be checked thoroughly before the first ride. Make sure no cables or hoses are trapped when mounting PSB06. Retaining the correct orientation of PSB06 is important; compare it with the photos.\u003c\/p\u003e\u003ch2\u003eFunction Overview\u003c\/h2\u003e\u003cp\u003eCompared with the original, PSB06 is lighter and adds rigidity at the front end. Because it keeps the stock inclination angle, PSB06 can be fitted without altering the steering geometry.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eWith PSB06, CNC Racing supplies the part only, without approval documents. Using PSB06 on public roads is your responsibility, so clarify the legal position first. Your local registration authority can tell you whether PSB06 is allowed on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta F3 800 (2013-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160313876746,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-yoke-mv-agusta-superveloce-800-serie-oro-2020-psb06","title":"CNC Racing Bottom Yoke MV Agusta Superveloce 800 Serie Oro (2020) – PSB06","description":"\u003cp\u003eCNC Racing lists PSB06, its bottom yoke, for the MV Agusta Superveloce 800 Serie Oro (2020). CNC Racing documents PSB06 per motorcycle, and the following sections apply to the Superveloce 800 Serie Oro. CNC Racing works with model-specific data, which is why the Superveloce 800 Serie Oro has its own listing for PSB06.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eMachined from billet lightweight alloy\u003c\/li\u003e\n\u003cli\u003eØ 54 mm, compatible with the original fork tubes\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eSame inclination angle as the stock plates\u003c\/li\u003e\n\u003cli\u003eFor sport road and track use\u003c\/li\u003e\n\u003cli\u003eLightweight stainless steel hardware included\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: MV Agusta Superveloce 800 Serie Oro (2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eOrder PSB06 in black, depending on what suits your bike.\u003c\/p\u003e\u003ch2\u003eIts Job\u003c\/h2\u003e\u003cp\u003ePSB06 increases front-end rigidity while reducing weight compared with the stock component. Because it keeps the stock inclination angle, PSB06 can be fitted without altering the steering geometry.\u003c\/p\u003e\u003ch2\u003eCare Routine\u003c\/h2\u003e\u003cp\u003eBrake cleaner and thinners do not belong on PSB06. A dry, covered parking space protects PSB06 as well as the rest of the motorcycle. A visual check of PSB06 before each ride takes only a moment.\u003c\/p\u003e\u003ch2\u003eWhich Bike It Suits\u003c\/h2\u003e\u003cp\u003eCNC Racing assigns PSB06 to the MV Agusta Superveloce 800 Serie Oro (2020). For motorcycles near the start or end of 2020, a check of the exact Superveloce 800 Serie Oro version is advisable. Please do not rely on appearance alone; the MV Agusta Superveloce 800 Serie Oro must match by model and year. The same part PSB06 is available for MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR, and every one of them has its own page. Unsure? Write to us quoting PSB06 and the model, version and year of your motorcycle.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eThe aluminium of PSB06 is light and stiff, which suits a motorcycle part well. Choosing aluminium for PSB06 allows CNC Racing to keep the part light. Consistent production quality defines PSB06.\u003c\/p\u003e\u003ch2\u003eFitting Information\u003c\/h2\u003e\u003cp\u003eFit PSB06 at the original position of the original bottom yoke on the steering head. PSB06 is mounted on the steering head after removing the original bottom yoke. Per unit, PSB06 is one individual part. Inspect the fitting of PSB06 after the first kilometres on the road. Leave fitting PSB06 to a workshop if you are not experienced with motorcycle mechanics. Allow enough time for PSB06: careful fitting pays off in a clean result. If you lack the tools or experience for PSB06, leave the job to a workshop.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eCNC Racing has no registration papers for PSB06. Using PSB06 on public roads is your responsibility, so clarify the legal position first. Track use and road use of PSB06 can be treated differently by law.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Superveloce 800 Serie Oro (2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160314040586,"sku":"PSB06B","price":393.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb06b.png?v=1794928802"},{"product_id":"cnc-racing-bottom-triple-clamp-ducati-panigale-1199-r-2013-2017-psb11-03","title":"CNC Racing Bottom Triple Clamp Ducati Panigale 1199 R (2013-2017) – PSB11_03","description":"\u003cp\u003eThe Bottom Triple Clamp with code PSB11_03 comes from CNC Racing and is listed for the Ducati Panigale 1199 R (2013-2017). The CNC Racing range covers many motorcycles; this page deals only with PSB11_03 on the Panigale 1199 R. CNC Racing develops parts for specific motorcycles, and PSB11_03 was drawn up with the Panigale 1199 R in mind.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eSame dimensions as the factory part\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eLight alloy, machined from solid, anodised\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eFork leg diameter 58 mm\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom triple clamp, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Panigale 1199 R, 2013-2017\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWorking Principle\u003c\/h2\u003e\u003cp\u003ePSB11_03 has the same geometric dimensions as the factory plate, with an offset of 30 mm and a centre distance of 226 mm. Fixing screws in lightened stainless steel are part of PSB11_03.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eColour variants of PSB11_03 on this page: black.\u003c\/p\u003e\u003ch2\u003eBike and Build Year\u003c\/h2\u003e\u003cp\u003eGoing by the maker's vehicle list, PSB11_03 fits the Ducati Panigale 1199 R (2013-2017). Before ordering, confirm that the version of your Panigale 1199 R is the one named in the fitment above. To be on the safe side, compare model, version and year of your Panigale 1199 R with this page. Additional motorcycles in the PSB11_03 fitment: Ducati Panigale 1299, Ducati Panigale 1299 S, Ducati Panigale 899, Ducati Panigale 959. We are glad to compare PSB11_03 with the parts currently fitted to your motorcycle. PSB11_03 fits only together with the CNC Racing steering tubes.\u003c\/p\u003e\u003ch2\u003eThe Build\u003c\/h2\u003e\u003cp\u003eAluminium is the material of choice for PSB11_03 because it is light and dimensionally stable. Made from aluminium, PSB11_03 puts hardly any extra weight on the motorcycle. For PSB11_03, material selection and manufacturing go hand in hand.\u003c\/p\u003e\u003ch2\u003eCare Routine\u003c\/h2\u003e\u003cp\u003eMild soap and water keep PSB11_03 clean without harming the aluminium. Check PSB11_03 again after the first rides to see that it is still firmly in place. A careful look at PSB11_03 after off-road or track use is advisable.\u003c\/p\u003e\u003ch2\u003eMounting Notes\u003c\/h2\u003e\u003cp\u003eUnbolt the original bottom triple clamp on the steering head and fit PSB11_03 instead. Remove the original bottom triple clamp on the steering head, then mount PSB11_03. The scope of delivery of PSB11_03 is one part. Incorrect fitting of PSB11_03 can impair riding safety, so leave it to professionals if in doubt. Tighten the fixings of PSB11_03 according to the vehicle manufacturer and check them again later. Mechanical care during installation protects PSB11_03 and the motorcycle. Check all clearances once PSB11_03 is in place.\u003c\/p\u003e\u003ch2\u003eRegistration Notes\u003c\/h2\u003e\u003cp\u003ePSB11_03 comes without a German ABE; none is available from CNC Racing. Whether an individual inspection of PSB11_03 is possible depends on the testing body. The legal situation for PSB11_03 differs from country to country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 1199 R (2013-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160330096906,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-triple-clamp-ducati-panigale-1299-2015-2017-psb11-03","title":"CNC Racing Bottom Triple Clamp Ducati Panigale 1299 (2015-2017) – PSB11_03","description":"\u003cp\u003eCNC Racing supplies its Bottom Triple Clamp as PSB11_03 for the Ducati Panigale 1299 (2015-2017). Take a moment to read the details on PSB11_03 before planning the work on your Panigale 1299. The headings below lead you through PSB11_03 for the Panigale 1299, from construction to care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black\u003c\/li\u003e\n\u003cli\u003eLight alloy, machined from solid, anodised\u003c\/li\u003e\n\u003cli\u003eSame dimensions as the factory part\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFork leg diameter 58 mm\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom triple clamp, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Panigale 1299 (2015-2017)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003ePick black for PSB11_03 from the variant menu.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eCNC Racing's fitment table pairs PSB11_03 with the Ducati Panigale 1299 (2015-2017). Race-converted examples of the Panigale 1299 may no longer have the parts PSB11_03 is designed around. Not sure which version your Panigale 1299 is? Our team will gladly look it up for you. CNC Racing's fitment list for PSB11_03 goes on to name Ducati Panigale 1199 R, Ducati Panigale 1299 S, Ducati Panigale 899, Ducati Panigale 959. Keep the order number and PSB11_03 at hand if you contact us about fitment. PSB11_03 fits only together with the CNC Racing steering tubes.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eInstallation on the steering head: PSB11_03 replaces the original bottom triple clamp. The replacement of the original bottom triple clamp by PSB11_03 takes place on the steering head. Inside the box there is a single PSB11_03. Once you have covered the first kilometres, retighten every fixing of PSB11_03. Faulty installation of PSB11_03 can be dangerous, so have a workshop do it if unsure. Make sure no cables or hoses are trapped when mounting PSB11_03. Check all clearances once PSB11_03 is in place.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003ePSB11_03 has the same geometric dimensions as the factory plate, with an offset of 30 mm and a centre distance of 226 mm. The kit PSB11_03 includes fixing screws in lightened stainless steel.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003ePlain water with a drop of neutral cleaner removes everyday dirt from PSB11_03. Salt from winter roads should be rinsed off PSB11_03 promptly. Have PSB11_03 checked by a workshop if you notice any damage.\u003c\/p\u003e\u003ch2\u003eThe Build\u003c\/h2\u003e\u003cp\u003eUsing aluminium, CNC Racing gives PSB11_03 low weight and a precise shape. Aluminium forms the body of PSB11_03 and keeps the weight low. Clean workmanship gives PSB11_03 a high-quality appearance.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eWe receive no ABE for PSB11_03 from CNC Racing. Please make sure that riding with PSB11_03 is permitted where you live. Before road use, find out whether PSB11_03 has to be registered in your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 1299 (2015-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160330359050,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-triple-clamp-ducati-panigale-1299-s-2015-2017-psb11-03","title":"CNC Racing Bottom Triple Clamp Ducati Panigale 1299 S (2015-2017) – PSB11_03","description":"\u003cp\u003eFeatured here: PSB11_03, the Bottom Triple Clamp that CNC Racing lists against the Ducati Panigale 1299 S (2015-2017). Our description of PSB11_03 for the Panigale 1299 S is based on the information CNC Racing publishes. The sections that follow keep to facts: what PSB11_03 is, how it fits the Panigale 1299 S and how to look after it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eSame dimensions as the factory part\u003c\/li\u003e\n\u003cli\u003eFork leg diameter 58 mm\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eLight alloy, machined from solid, anodised\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFits in place of the original bottom triple clamp\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Panigale 1299 S, 2015-2017\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eDust and light dirt come off PSB11_03 with a dry microfibre cloth. Inspect PSB11_03 as part of your seasonal check. Protect PSB11_03 from contact with sharp tools during other work on the motorcycle.\u003c\/p\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eCNC Racing designed PSB11_03 as a direct substitute for the original bottom triple clamp on the steering head. PSB11_03 occupies the position of the original bottom triple clamp on the steering head. Delivery of PSB11_03 consists of one piece. Safety-relevant parts like PSB11_03 should only be fitted by people with the right know-how. Before riding, check that PSB11_03 is firmly attached and moves freely where it should. Mechanical care during installation protects PSB11_03 and the motorcycle. Grease or thread locker? Follow the guidance of your workshop manual for PSB11_03.\u003c\/p\u003e\u003ch2\u003eColour Line-Up\u003c\/h2\u003e\u003cp\u003eTo match other parts, PSB11_03 is offered in black.\u003c\/p\u003e\u003ch2\u003eTechnical Function\u003c\/h2\u003e\u003cp\u003ePSB11_03 has the same geometric dimensions as the factory plate, with an offset of 30 mm and a centre distance of 226 mm. The kit PSB11_03 includes fixing screws in lightened stainless steel.\u003c\/p\u003e\u003ch2\u003eProduction and Material\u003c\/h2\u003e\u003cp\u003eAluminium forms the body of PSB11_03 and keeps the weight low. The metal used for PSB11_03 is aluminium, valued in motorsport for its low density. PSB11_03 is the result of careful work with aluminium.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eThis page lists PSB11_03 for one motorcycle only: the Ducati Panigale 1299 S (2015-2017). Different markets sometimes received different versions of the Panigale 1299 S; the type code helps to tell them apart. Please do not rely on appearance alone; the Ducati Panigale 1299 S must match by model and year. Separate listings exist for Ducati Panigale 1199 R, Ducati Panigale 1299, Ducati Panigale 899, Ducati Panigale 959, all with the same reference PSB11_03. Parts with the same name can differ by motorcycle, which is why PSB11_03 is listed per model. PSB11_03 fits only together with the CNC Racing steering tubes.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003ePSB11_03 comes without a German ABE; none is available from CNC Racing. Track use and road use of PSB11_03 can be treated differently by law. For road use of PSB11_03, the laws of the country of registration apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 1299 S (2015-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160330490122,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-triple-clamp-ducati-panigale-899-2013-2015-psb11-03","title":"CNC Racing Bottom Triple Clamp Ducati Panigale 899 (2013-2015) – PSB11_03","description":"\u003cp\u003ePSB11_03 by CNC Racing: the Bottom Triple Clamp, listed for the Ducati Panigale 899 (2013-2015). CNC Racing works with model-specific data, which is why the Panigale 899 has its own listing for PSB11_03. Each section below answers one question about PSB11_03 and the Panigale 899, from material to approval.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFork leg diameter 58 mm\u003c\/li\u003e\n\u003cli\u003eLight alloy, machined from solid, anodised\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eSame dimensions as the factory part\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original bottom triple clamp\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale 899 (2013-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTask on the Bike\u003c\/h2\u003e\u003cp\u003eThe bottom yoke PSB11_03 keeps factory geometry: offset 30 mm, centre distance 226 mm and 58 mm fork legs. Fixing screws in lightened stainless steel are part of PSB11_03.\u003c\/p\u003e\u003ch2\u003eFitment at a Glance\u003c\/h2\u003e\u003cp\u003eOn CNC Racing's model list, the Ducati Panigale 899 (2013-2015) appears as a match for PSB11_03. For the Ducati Panigale 899, CNC Racing's data is specific, so a quick check of your papers is worthwhile. Compare your Panigale 899 with the product photos of PSB11_03 if you want extra certainty. CNC Racing's fitment list for PSB11_03 goes on to name Ducati Panigale 1199 R, Ducati Panigale 1299, Ducati Panigale 1299 S, Ducati Panigale 959. Before ordering PSB11_03, it helps to have the vehicle identification number to hand. PSB11_03 fits only together with the CNC Racing steering tubes.\u003c\/p\u003e\u003ch2\u003eCare Information\u003c\/h2\u003e\u003cp\u003eDust and light dirt come off PSB11_03 with a dry microfibre cloth. Have PSB11_03 checked by a workshop if you notice any damage. Inspect the fixings of PSB11_03 during routine maintenance.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003ePSB11_03 owes its low weight to aluminium as the base material. CNC Racing produces PSB11_03 in aluminium, a light metal with good strength for its weight. PSB11_03 is the result of careful work with aluminium.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eMatching your bike's colour scheme is possible with PSB11_03 in black.\u003c\/p\u003e\u003ch2\u003eInstalling It\u003c\/h2\u003e\u003cp\u003eThe job: take off the original bottom triple clamp on the steering head and put PSB11_03 on. CNC Racing's PSB11_03 is fitted on the steering head in exchange for the original bottom triple clamp. PSB11_03 is sold individually. PSB11_03 belongs to the safety-related parts, so its fitting calls for expertise. Have your workshop confirm that PSB11_03 is correctly fitted. Make sure no cables or hoses are trapped when mounting PSB11_03. Grease or thread locker? Follow the guidance of your workshop manual for PSB11_03.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eCNC Racing provides PSB11_03 with no German approval paperwork. National laws decide whether PSB11_03 may be fitted for road use. Whether PSB11_03 is permitted on public roads is a matter for the rules of your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 899 (2013-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160330785034,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-triple-clamp-ducati-panigale-959-2016-2019-psb11-03","title":"CNC Racing Bottom Triple Clamp Ducati Panigale 959 (2016-2019) – PSB11_03","description":"\u003cp\u003eRiding the Ducati Panigale 959 (2016-2019)? Then PSB11_03, the Bottom Triple Clamp from CNC Racing, is matched to your motorcycle. You will find all information on PSB11_03 for your Panigale 959 in one place on this page. Inter-Pace lists PSB11_03 separately for each motorcycle, and this page is the one for the Panigale 959.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eLight alloy, machined from solid, anodised\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFork leg diameter 58 mm\u003c\/li\u003e\n\u003cli\u003eSame dimensions as the factory part\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom triple clamp, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting Tips\u003c\/h2\u003e\u003cp\u003eFit PSB11_03 at the original position of the original bottom triple clamp on the steering head. PSB11_03 goes on the steering head and replaces the original bottom triple clamp there. The delivery includes exactly one PSB11_03. Incorrect fitting of PSB11_03 can impair riding safety, so leave it to professionals if in doubt. Professional workshops bring the right equipment and routine to fit PSB11_03 correctly. Place the motorcycle securely on a stand before working on PSB11_03. Fit PSB11_03 with the motorcycle cold, so that you do not burn yourself on hot parts.\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eThe bottom yoke PSB11_03 keeps factory geometry: offset 30 mm, centre distance 226 mm and 58 mm fork legs. The kit PSB11_03 includes fixing screws in lightened stainless steel.\u003c\/p\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003eCNC Racing developed PSB11_03 with the Ducati Panigale 959 (2016-2019) among its target models. Please hold the production year of your Panigale 959 against 2016-2019 before you place the order. If several versions of the Panigale 959 exist, the version stated in your papers is the one that counts. The same part PSB11_03 is available for Ducati Panigale 1199 R, Ducati Panigale 1299, Ducati Panigale 1299 S, Ducati Panigale 899, and every one of them has its own page. CNC Racing updates its application lists, and Inter-Pace follows these changes for PSB11_03. PSB11_03 fits only together with the CNC Racing steering tubes.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eA damp microfibre cloth and a little mild soap are enough to keep PSB11_03 clean. Leaving the motorcycle in direct sun for long periods can fade surfaces, including PSB11_03. A dry, covered parking space protects PSB11_03 as well as the rest of the motorcycle.\u003c\/p\u003e\u003ch2\u003eBuild and Material\u003c\/h2\u003e\u003cp\u003ePSB11_03 is an aluminium part, lighter than a comparable steel component. Aluminium gives PSB11_03 a low weight compared with steel parts of similar size. Surfaces and edges of PSB11_03 are finished cleanly.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eOrder PSB11_03 in black, depending on what suits your bike.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eA parts certificate (Teilegutachten) for PSB11_03 is not available from CNC Racing. Insurance cover can be affected if PSB11_03 is not permitted where you ride. Modifications such as PSB11_03 may need to be reported, depending on the country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160330883338,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-yoke-ducati-panigale-v4-2018-2024-psb11-01","title":"CNC Racing Bottom Yoke Ducati Panigale V4 (2018-2024) – PSB11_01","description":"\u003cp\u003eCode PSB11_01 marks the Bottom Yoke that CNC Racing produces for the Ducati Panigale V4 (2018-2024). CNC Racing documents PSB11_01 per motorcycle, and the following sections apply to the Panigale V4. Material, contents and installation of PSB11_01 are the topics below, all with reference to the Panigale V4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFork leg Ø 58 mm\u003c\/li\u003e\n\u003cli\u003eLightened stainless steel screws included\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eFits only the CNC Racing steering tube PSA13B\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Panigale V4 (2018-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003ePSB11_01 is a bottom yoke machined from solid light alloy and anodised, with lightened stainless steel fixing screws included. The dimensions of PSB11_01 match the factory values: offset 30 mm, centre distance 226 mm, fork leg diameter 58 mm.\u003c\/p\u003e\u003ch2\u003eMaterial Overview\u003c\/h2\u003e\u003cp\u003eAluminium is the material of choice for PSB11_01 because it is light and dimensionally stable. In PSB11_01, CNC Racing uses aluminium, a metal that handles everyday loads on a motorcycle well. Material and workmanship of PSB11_01 have been aligned with one another.\u003c\/p\u003e\u003ch2\u003eColour Range\u003c\/h2\u003e\u003cp\u003eInter-Pace offers PSB11_01 in black.\u003c\/p\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eLook up PSB11_01 in the CNC Racing data and you will find the Ducati Panigale V4 (2018-2024) listed. Please make sure your Panigale V4 has not been fitted with parts that change the mounting area of PSB11_01. Where your Panigale V4 already carries aftermarket parts nearby, make sure PSB11_01 can still be fitted. PSB11_01 fits more than this motorcycle: CNC Racing also names Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4, Ducati Streetfighter V4 S. Keep the order number and PSB11_01 at hand if you contact us about fitment. PSB11_01 fits only together with the CNC Racing steering tube PSA13B.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eTo clean PSB11_01, use a soft cloth rather than brushes or abrasive pads. With occasional checks, PSB11_01 will serve you for a long time. Have PSB11_01 checked by a workshop if you notice any damage.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003ePSB11_01 goes on the steering head and replaces the original bottom yoke there. Fitted on the steering head, PSB11_01 replaces the original bottom yoke. Every order of PSB11_01 includes one part. Faulty installation of PSB11_01 can be dangerous, so have a workshop do it if unsure. Make sure PSB11_01 works properly before you ride in traffic. Handle PSB11_01 carefully before fitting to avoid scratches. Put small parts of PSB11_01 into a bowl while working, so none of them disappear.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eFrom CNC Racing there are no approval documents for PSB11_01. Ask your inspection centre whether PSB11_01 needs an individual assessment. Your local registration authority can tell you whether PSB11_01 is allowed on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 (2018-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160336912650,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-yoke-ducati-panigale-v4-r-2019-2020-psb11-01","title":"CNC Racing Bottom Yoke Ducati Panigale V4 R (2019-2020) – PSB11_01","description":"\u003cp\u003eHere is the CNC Racing Bottom Yoke; its item number PSB11_01 applies to the 2019-2020 Ducati Panigale V4 R. CNC Racing provides the technical background, and Inter-Pace adds the points that matter for the Panigale V4 R. Before you order for your Panigale V4 R, the notes below help you check fitment, contents and approval of PSB11_01.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eLightened stainless steel screws included\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eFork leg Ø 58 mm\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eFits only the CNC Racing steering tube PSA13B\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Panigale V4 R, 2019-2020\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eAluminium was selected for PSB11_01 as a light and corrosion-resistant metal. Aluminium is the material of choice for PSB11_01 because it is light and dimensionally stable. Shaping and finishing of the aluminium in PSB11_01 happen in several steps.\u003c\/p\u003e\u003ch2\u003eFitment at a Glance\u003c\/h2\u003e\u003cp\u003eGoing by the maker's vehicle list, PSB11_01 fits the Ducati Panigale V4 R (2019-2020). Your registration papers confirm whether your motorcycle is listed as Ducati Panigale V4 R and built 2019-2020. Every detail counts: name, variant and build year of your Ducati Panigale V4 R should all match. The part number PSB11_01 is shared with listings for Ducati Panigale V4, Ducati Panigale V4 S, Ducati Streetfighter V4, Ducati Streetfighter V4 S. Unsure? Write to us quoting PSB11_01 and the model, version and year of your motorcycle. PSB11_01 fits only together with the CNC Racing steering tube PSA13B.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003ePSB11_01 comes in black, as listed by CNC Racing.\u003c\/p\u003e\u003ch2\u003eWhat It Is For\u003c\/h2\u003e\u003cp\u003eThe bottom yoke PSB11_01 is milled from solid alloy, anodised, and supplied with lightened stainless steel screws. PSB11_01 keeps the geometric dimensions of the factory part, with offset 30 mm, centre distance 226 mm and fork leg Ø 58 mm.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eFor fitting, remove the original bottom yoke on the steering head and put PSB11_01 in its position. Mounted on the steering head, PSB11_01 is used in lieu of the original bottom yoke. PSB11_01 comes as a single item. The function of PSB11_01 must be checked thoroughly before the first ride. Test every function connected to PSB11_01 while stationary before setting off. Clean threads make it easier to fit PSB11_01 correctly. Use a torque wrench so that every fixing of PSB11_01 ends up equally tight.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eCleaning PSB11_01 needs nothing more than water, a mild cleaner and a soft cloth. In storage, keep PSB11_01 away from direct heat sources. A dry, covered parking space protects PSB11_01 as well as the rest of the motorcycle.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eNo expert report or ABE: CNC Racing does not issue these for PSB11_01. Local regulations on modifications also apply to PSB11_01. National laws decide whether PSB11_01 may be fitted for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 R (2019-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160337109258,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-yoke-ducati-panigale-v4-s-2018-2024-psb11-01","title":"CNC Racing Bottom Yoke Ducati Panigale V4 S (2018-2024) – PSB11_01","description":"\u003cp\u003eInter-Pace lists CNC Racing number PSB11_01, the Bottom Yoke, here matched to the Ducati Panigale V4 S (2018-2024). Our description of PSB11_01 for the Panigale V4 S is based on the information CNC Racing publishes. Below, Inter-Pace sums up what CNC Racing says about PSB11_01 and what it means for the Panigale V4 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFits only the CNC Racing steering tube PSA13B\u003c\/li\u003e\n\u003cli\u003eFork leg Ø 58 mm\u003c\/li\u003e\n\u003cli\u003eLightened stainless steel screws included\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eFits in place of the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Panigale V4 S (2018-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and Contents\u003c\/h2\u003e\u003cp\u003eIn place of the original bottom yoke, you mount PSB11_01 on the steering head. Mounted on the steering head, PSB11_01 is used in lieu of the original bottom yoke. The delivery includes exactly one PSB11_01. Leave fitting PSB11_01 to a workshop if you are not experienced with motorcycle mechanics. Incorrect fitting of PSB11_01 can impair riding safety, so leave it to professionals if in doubt. If PSB11_01 needs adjusting, do so before final tightening. Before fitting PSB11_01, compare it with the part it goes next to or replaces.\u003c\/p\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003ePSB11_01 consists of aluminium, a material long established in motorcycle accessories. PSB11_01 owes its low weight to aluminium as the base material. CNC Racing combines aluminium and precise production in PSB11_01.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003ePSB11_01 comes in black, as listed by CNC Racing.\u003c\/p\u003e\u003ch2\u003eWhich Bike It Suits\u003c\/h2\u003e\u003cp\u003eFits according to CNC Racing: Ducati Panigale V4 S, production period 2018-2024. Look at the year of manufacture of your Panigale V4 S and check it against 2018-2024. Before you order PSB11_01, have your Panigale V4 S papers to hand and compare them with the listing. Inter-Pace splits PSB11_01 into one page per motorcycle, including Ducati Panigale V4, Ducati Panigale V4 R, Ducati Streetfighter V4, Ducati Streetfighter V4 S. If anything is unclear about PSB11_01, we would rather answer a question than see a return. PSB11_01 fits only together with the CNC Racing steering tube PSA13B.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eRegular cleaning prevents dirt from settling into the details of PSB11_01. Regular inspection of PSB11_01 is part of responsible motorcycle care. A visual check of PSB11_01 before each ride takes only a moment.\u003c\/p\u003e\u003ch2\u003eFunction Explained\u003c\/h2\u003e\u003cp\u003ePSB11_01 is a bottom yoke machined from solid light alloy and anodised, with lightened stainless steel fixing screws included. The dimensions of PSB11_01 match the factory values: offset 30 mm, centre distance 226 mm, fork leg diameter 58 mm.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eThe manufacturer CNC Racing provides no approval certificate for PSB11_01. Please check the regulations that apply where you ride before using PSB11_01 on the road. The legal situation for PSB11_01 differs from country to country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 S (2018-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160337240330,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-yoke-ducati-streetfighter-v4-2020-2024-psb11-01","title":"CNC Racing Bottom Yoke Ducati Streetfighter V4 (2020-2024) – PSB11_01","description":"\u003cp\u003eThe Ducati Streetfighter V4 built 2020-2024 is one of the motorcycles CNC Racing makes the Bottom Yoke PSB11_01 for. The CNC Racing range covers many motorcycles; this page deals only with PSB11_01 on the Streetfighter V4. A clear overview of PSB11_01 for the Streetfighter V4 follows: construction, scope, fitting and care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFork leg Ø 58 mm\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black\u003c\/li\u003e\n\u003cli\u003eLightened stainless steel screws included\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eFits only the CNC Racing steering tube PSA13B\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare Advice\u003c\/h2\u003e\u003cp\u003eWhen cleaning PSB11_01, work from top to bottom with a soft sponge. If PSB11_01 shows signs of wear, replace it before continuing to ride. A garage or carport keeps weather away from PSB11_01.\u003c\/p\u003e\u003ch2\u003eMatching Your Bike\u003c\/h2\u003e\u003cp\u003eCNC Racing's fitment table pairs PSB11_01 with the Ducati Streetfighter V4 (2020-2024). Please hold the production year of your Streetfighter V4 against 2020-2024 before you place the order. The registration certificate of your Streetfighter V4 lists the details you need for this comparison. The same part PSB11_01 is available for Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4 S, and every one of them has its own page. Advice from us about PSB11_01 costs nothing and comes with no obligation to buy. PSB11_01 fits only together with the CNC Racing steering tube PSA13B.\u003c\/p\u003e\u003ch2\u003eAbout Construction\u003c\/h2\u003e\u003cp\u003eAluminium forms the body of PSB11_01 and keeps the weight low. Aluminium is the material of choice for PSB11_01 because it is light and dimensionally stable. Aluminium as the base and careful processing define PSB11_01.\u003c\/p\u003e\u003ch2\u003eFitting Information\u003c\/h2\u003e\u003cp\u003eExchanging the original bottom yoke for PSB11_01 is done on the steering head. After removing the original bottom yoke on the steering head, PSB11_01 is fitted. One single component makes up the delivery of PSB11_01. Ensure that PSB11_01 does not restrict any movement of controls or chassis. Do not ride if anything about PSB11_01 feels wrong after fitting; have it checked. Retaining the correct orientation of PSB11_01 is important; compare it with the photos. A workshop manual for your motorcycle is useful when fitting PSB11_01.\u003c\/p\u003e\u003ch2\u003eColour Line-Up\u003c\/h2\u003e\u003cp\u003eOur shop lists PSB11_01 in black.\u003c\/p\u003e\u003ch2\u003eFunction Notes\u003c\/h2\u003e\u003cp\u003eThe bottom yoke PSB11_01 is milled from solid alloy, anodised, and supplied with lightened stainless steel screws. The dimensions of PSB11_01 match the factory values: offset 30 mm, centre distance 226 mm, fork leg diameter 58 mm.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eWe receive no ABE for PSB11_01 from CNC Racing. Competent authorities in your country can answer questions about PSB11_01 and road use. Local regulations on modifications also apply to PSB11_01.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160337633546,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-bottom-yoke-ducati-streetfighter-v4-s-2020-2024-psb11-01","title":"CNC Racing Bottom Yoke Ducati Streetfighter V4 S (2020-2024) – PSB11_01","description":"\u003cp\u003ePSB11_01 by CNC Racing: the Bottom Yoke, listed for the Ducati Streetfighter V4 S (2020-2024). CNC Racing develops parts for specific motorcycles, and PSB11_01 was drawn up with the Streetfighter V4 S in mind. On the Streetfighter V4 S, PSB11_01 takes a defined place; the paragraphs below explain where and how.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eFits only the CNC Racing steering tube PSA13B\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eLightened stainless steel screws included\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eFork leg Ø 58 mm\u003c\/li\u003e\n\u003cli\u003eOffset 30 mm, centre distance 226 mm\u003c\/li\u003e\n\u003cli\u003eReplaces the original bottom yoke, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstalling It\u003c\/h2\u003e\u003cp\u003eAfter removing the original bottom yoke on the steering head, PSB11_01 is fitted. CNC Racing places PSB11_01 on the steering head, where it substitutes the original bottom yoke. One part, number PSB11_01, is what you receive. Before riding, check that PSB11_01 is firmly attached and moves freely where it should. Have your workshop confirm that PSB11_01 is correctly fitted. Hand-tighten the fixings of PSB11_01 first, then tighten to the specified value. Put small parts of PSB11_01 into a bowl while working, so none of them disappear.\u003c\/p\u003e\u003ch2\u003eShades on Offer\u003c\/h2\u003e\u003cp\u003eUse the colour option to choose PSB11_01 in black.\u003c\/p\u003e\u003ch2\u003eCare Information\u003c\/h2\u003e\u003cp\u003eRegular cleaning prevents dirt from settling into the details of PSB11_01. A dry, covered parking space protects PSB11_01 as well as the rest of the motorcycle. Keep chemicals away from PSB11_01 when using cleaning products on other parts.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eInter-Pace lists PSB11_01 for the Ducati Streetfighter V4 S (2020-2024) exactly as CNC Racing specifies. Check the type code in your documents to be sure that your Streetfighter V4 S is covered. Check carefully: the CNC Racing data refers to the Ducati Streetfighter V4 S only within 2020-2024. Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4: further entries in the CNC Racing data for PSB11_01. The details on this page for PSB11_01 are as complete as CNC Racing's data allows. PSB11_01 fits only together with the CNC Racing steering tube PSA13B.\u003c\/p\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eThe aluminium construction of PSB11_01 keeps the added weight small. The aluminium of PSB11_01 is light and stiff, which suits a motorcycle part well. Processing of the aluminium in PSB11_01 is done with care, from raw stock to finished part.\u003c\/p\u003e\u003ch2\u003eFunction Explained\u003c\/h2\u003e\u003cp\u003ePSB11_01 is a bottom yoke machined from solid light alloy and anodised, with lightened stainless steel fixing screws included. PSB11_01 keeps the geometric dimensions of the factory part, with offset 30 mm, centre distance 226 mm and fork leg Ø 58 mm.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eCNC Racing provides PSB11_01 with no German approval paperwork. If you plan to ride on public roads with PSB11_01, check the legal requirements first. Your local registration authority can tell you whether PSB11_01 is allowed on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB11_01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160337699082,"sku":"PSB11B","price":583.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb11b-01.png?v=1794928806"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-panigale-v4-2018-2019-tr115","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Panigale V4 (2018-2019) – TR115","description":"\u003cp\u003eOffered for the Ducati Panigale V4 (2018-2019), the CNC Racing Lowering Tie Rods for Rear Shock Absorber carries the number TR115. Delivery contents, fitting notes and approval status of TR115 on the Panigale V4 are covered below. Whether TR115 is right for your Panigale V4 depends on the points listed in the following paragraphs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eTwo parts included\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 15 mm\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eFits in place of the original tie rods\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Panigale V4 (2018-2019)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Construction\u003c\/h2\u003e\u003cp\u003eThe base material of TR115 is aluminium, chosen for its balance of low mass and rigidity. Aluminium gives TR115 a low weight compared with steel parts of similar size. Processing of the aluminium in TR115 is done with care, from raw stock to finished part.\u003c\/p\u003e\u003ch2\u003eTechnical Function\u003c\/h2\u003e\u003cp\u003eTR115 is a pair of tie rods for the rear linkage that lowers the seat height by 15 mm compared with the originals. Assembly of TR115 needs no modification, as the screws and nuts are supplied.\u003c\/p\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003eIn the variant menu, TR115 is listed in black and red.\u003c\/p\u003e\u003ch2\u003eCleaning and Inspection\u003c\/h2\u003e\u003cp\u003ePat TR115 dry after cleaning rather than letting water dry on the surface. A garage or carport keeps weather away from TR115. Leaving the motorcycle in direct sun for long periods can fade surfaces, including TR115.\u003c\/p\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eCNC Racing's fitment table pairs TR115 with the Ducati Panigale V4 (2018-2019). Your Panigale V4 should match both the model name and 2018-2019 for this listing to apply. The year of manufacture matters: TR115 is assigned to the Ducati Panigale V4 built 2018-2019. Additional motorcycles in the TR115 fitment: Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4, Ducati Streetfighter V4 S. The reference TR115 identifies this part clearly in any enquiry. With TR115 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eCNC Racing's TR115 is fitted on the rear suspension linkage in exchange for the original tie rods. Your motorcycle receives TR115 on the rear suspension linkage in exchange for the original tie rods. This listing is for two pieces of TR115. Brake, control and chassis components such as TR115 demand careful fitting. Make sure TR115 works properly before you ride in traffic. Inter-Pace recommends fitting TR115 in a workshop if you are unsure. Proper fitting of TR115 requires clean and undamaged mounting points.\u003c\/p\u003e\u003ch2\u003eApproval Situation\u003c\/h2\u003e\u003cp\u003ePlease note: CNC Racing does not provide approval documents for TR115. For road use of TR115, the laws of the country of registration apply. Your local registration authority can tell you whether TR115 is allowed on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR115\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 (2018-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160401137930,"sku":"TR115B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54160401170698,"sku":"TR115R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-tr115b.png?v=1794931287"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-panigale-v4-r-2019-2024-tr115","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Panigale V4 R (2019-2024) – TR115","description":"\u003cp\u003eThe Lowering Tie Rods for Rear Shock Absorber sold under TR115 is a CNC Racing product for the Ducati Panigale V4 R (2019-2024). Below, Inter-Pace sums up what CNC Racing says about TR115 and what it means for the Panigale V4 R. Information on TR115 for the Panigale V4 R is arranged below in short, clearly headed sections.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 15 mm\u003c\/li\u003e\n\u003cli\u003eTwo parts included\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eFits in place of the original tie rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale V4 R (2019-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003eThis page lists TR115 for one motorcycle only: the Ducati Panigale V4 R (2019-2024). Check the type code in your documents to be sure that your Panigale V4 R is covered. Imported bikes can differ from the European Panigale V4 R; compare the type code if in doubt. Additional motorcycles in the TR115 fitment: Ducati Panigale V4, Ducati Panigale V4 S, Ducati Streetfighter V4, Ducati Streetfighter V4 S. Do you need help with the choice? Inter-Pace advises on TR115 and related CNC Racing parts. With TR115 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eCleaning and Inspection\u003c\/h2\u003e\u003cp\u003eWipe TR115 down regularly so that dirt does not build up. Damage from stones or debris on TR115 should be inspected promptly. After washing, check that no water remains trapped around TR115.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eCNC Racing chose aluminium for TR115, combining low weight with sufficient strength. For TR115, CNC Racing works with aluminium, which machines cleanly and holds tight tolerances. The way TR115 is finished matches the quality of its aluminium.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eCNC Racing offers TR115 in black and red.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eFitting TR115 means exchanging the original tie rods on the rear suspension linkage. You take off the original tie rods on the rear suspension linkage; TR115 then goes in its place. This listing is for two pieces of TR115. Tighten the fixings of TR115 according to the vehicle manufacturer and check them again later. Test TR115 thoroughly in a safe place before riding in traffic. If you lack the tools or experience for TR115, leave the job to a workshop. Inter-Pace recommends fitting TR115 in a workshop if you are unsure.\u003c\/p\u003e\u003ch2\u003eFunction Notes\u003c\/h2\u003e\u003cp\u003eTR115 is a pair of tie rods for the rear linkage that lowers the seat height by 15 mm compared with the originals. Assembly of TR115 needs no modification, as the screws and nuts are supplied.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eFor TR115, CNC Racing provides no general operating permit (ABE). In some countries TR115 can be used without further paperwork, in others it cannot. If you plan to ride on public roads with TR115, check the legal requirements first.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR115\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 R (2019-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160401301770,"sku":"TR115B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54160401334538,"sku":"TR115R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-tr115b.png?v=1794931287"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-panigale-v4-s-2018-2019-tr115","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Panigale V4 S (2018-2019) – TR115","description":"\u003cp\u003eOnce fitted, TR115 gives the Ducati Panigale V4 S (2018-2019) the Lowering Tie Rods for Rear Shock Absorber as CNC Racing supplies it. Below, Inter-Pace sums up what CNC Racing says about TR115 and what it means for the Panigale V4 S. Practical points on fitting TR115 to the Panigale V4 S are dealt with in the following text.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 15 mm\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eTwo parts included\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eFits in place of the original tie rods\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale V4 S (2018-2019)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChecking Your Model\u003c\/h2\u003e\u003cp\u003eThe fitment check for TR115 leads to the Ducati Panigale V4 S (2018-2019) in CNC Racing's data. The production period of the Ducati Panigale V4 S named here is 2018-2019; check that yours falls within it. Ordering for a friend's Panigale V4 S? Ask for the year of manufacture first. Other listings of TR115 cover Ducati Panigale V4, Ducati Panigale V4 R, Ducati Streetfighter V4, Ducati Streetfighter V4 S. Before ordering TR115, it helps to have the vehicle identification number to hand. With TR115 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eIts Job\u003c\/h2\u003e\u003cp\u003eTR115 is a pair of tie rods for the rear linkage that lowers the seat height by 15 mm compared with the originals. The supplied screws and nuts allow TR115 to be fitted without modifying the bike.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eColour options for TR115: black and red.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eThe job: take off the original tie rods on the rear suspension linkage and put TR115 on. TR115 acts as a replacement for the original tie rods; its seat is on the rear suspension linkage. Supplied quantity of TR115: two pieces. Have your workshop confirm that TR115 is correctly fitted. Screws on TR115 can settle during the first kilometres; check and retighten them. Grease or thread locker? Follow the guidance of your workshop manual for TR115. Mechanical care during installation protects TR115 and the motorcycle.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eNever use polishing paste with abrasives on TR115. Salt from winter roads should be rinsed off TR115 promptly. Every few thousand kilometres, take a closer look at TR115.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eTR115 is produced in aluminium, a metal that resists corrosion well when finished properly. Aluminium, the material of TR115, can be machined to fine detail. CNC Racing applies the same production standard to TR115 as to its other parts.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eFor TR115, CNC Racing provides no general operating permit (ABE). Using TR115 on public roads is your responsibility, so clarify the legal position first. Please check the regulations that apply where you ride before using TR115 on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR115\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale V4 S (2018-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160401400074,"sku":"TR115B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54160401432842,"sku":"TR115R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-tr115b.png?v=1794931287"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-streetfighter-v4-2020-2024-tr115","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Streetfighter V4 (2020-2024) – TR115","description":"\u003cp\u003eOnce fitted, TR115 gives the Ducati Streetfighter V4 (2020-2024) the Lowering Tie Rods for Rear Shock Absorber as CNC Racing supplies it. CNC Racing is a maker of motorcycle accessories, and TR115 is part of its programme for the Streetfighter V4. Details about how TR115 is built and how it goes onto the Streetfighter V4 are listed further down.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 15 mm\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original tie rods\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Streetfighter V4, 2020-2024\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eCNC Racing trusts aluminium for TR115, a metal that keeps its shape under load. Aluminium makes up TR115, a material that does not rust. Consistent production quality defines TR115.\u003c\/p\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003eTR115 is catalogued by CNC Racing for the Ducati Streetfighter V4 (2020-2024). Ordering for a friend's Streetfighter V4? Ask for the year of manufacture first. For the Ducati Streetfighter V4, CNC Racing's data is specific, so a quick check of your papers is worthwhile. For Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4 S there are matching pages of TR115 in our catalogue. Your workshop can give a second view on TR115 by comparing it with your motorcycle. With TR115 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eColours for TR115, as specified by the maker: black and red.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003eCleaning TR115 needs nothing more than water, a mild cleaner and a soft cloth. Check the screws of TR115 once in a while and retighten them if needed. Should TR115 come loose, stop and secure it before riding further.\u003c\/p\u003e\u003ch2\u003eOn to the Bike\u003c\/h2\u003e\u003cp\u003eTR115 is fitted on the rear suspension linkage, taking the role of the original tie rods. TR115 is mounted on the rear suspension linkage after removing the original tie rods. CNC Racing delivers TR115 as a pair. Test TR115 thoroughly in a safe place before riding in traffic. Incorrect fitting of TR115 can impair riding safety, so leave it to professionals if in doubt. Fitting TR115 calls for basic mechanical skills and suitable tools. Check all clearances once TR115 is in place.\u003c\/p\u003e\u003ch2\u003eWhat It Is For\u003c\/h2\u003e\u003cp\u003eWith TR115 the seat height is reduced by 15 mm, because the tie rods are shorter than the originals. The supplied screws and nuts allow TR115 to be fitted without modifying the bike.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eCNC Racing does not supply an ABE or a parts certificate for TR115. Your local registration authority can tell you whether TR115 is allowed on the road. Track use and road use of TR115 can be treated differently by law.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR115\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160401563914,"sku":"TR115B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54160401596682,"sku":"TR115R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-tr115b.png?v=1794931287"},{"product_id":"cnc-racing-lowering-tie-rods-for-rear-shock-absorber-ducati-streetfighter-v4-s-2020-2024-tr115","title":"CNC Racing Lowering Tie Rods for Rear Shock Absorber Ducati Streetfighter V4 S (2020-2024) – TR115","description":"\u003cp\u003eOffered for the Ducati Streetfighter V4 S (2020-2024), the CNC Racing Lowering Tie Rods for Rear Shock Absorber carries the number TR115. Every section below takes up one aspect of TR115, always with the Streetfighter V4 S in view. Short sections below explain TR115 for the Streetfighter V4 S: no filler, just the facts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eLowers the seat height by 15 mm\u003c\/li\u003e\n\u003cli\u003eKit of two pieces\u003c\/li\u003e\n\u003cli\u003eTwo parts included\u003c\/li\u003e\n\u003cli\u003eBike stands more upright on the side stand\u003c\/li\u003e\n\u003cli\u003eScrews and nuts supplied\u003c\/li\u003e\n\u003cli\u003eFits in place of the original tie rods\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eThe aluminium of TR115 is light and stiff, which suits a motorcycle part well. The base material of TR115 is aluminium, chosen for its balance of low mass and rigidity. Choosing aluminium for TR115 reflects what the part has to do.\u003c\/p\u003e\u003ch2\u003eCare Advice\u003c\/h2\u003e\u003cp\u003eA soft cloth is all it takes to wipe fingerprints off TR115. Replace TR115 if it is bent or cracked rather than straightening it. Lay tools down carefully so they do not scratch TR115.\u003c\/p\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eFitment data for TR115: Ducati Streetfighter V4 S, 2020-2024, supplied by CNC Racing. We recommend checking the frame number or type code of your Streetfighter V4 S against the manufacturer data. Have a look at the build date of your Streetfighter V4 S; it should fall inside 2020-2024. The manufacturer's data for TR115 also mentions Ducati Panigale V4, Ducati Panigale V4 R, Ducati Panigale V4 S, Ducati Streetfighter V4. Before ordering TR115, it helps to have the vehicle identification number to hand. With TR115 the motorcycle assumes a more vertical position on the side stand, so take care when parking.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eYou can choose TR115 in black and red using the selector above.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003eWith TR115 the seat height is reduced by 15 mm, because the tie rods are shorter than the originals. The supplied screws and nuts allow TR115 to be fitted without modifying the bike.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eInstallation on the rear suspension linkage: TR115 replaces the original tie rods. Fit TR115 at the original position of the original tie rods on the rear suspension linkage. Two parts are included with TR115. Safety comes first with TR115: fit carefully, test thoroughly, check again. Tighten the fixings of TR115 according to the vehicle manufacturer and check them again later. If you lack the tools or experience for TR115, leave the job to a workshop. Lay out the tools you need before you start working on TR115.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eA parts certificate (Teilegutachten) for TR115 is not available from CNC Racing. The legal situation for TR115 differs from country to country. Please make sure that riding with TR115 is permitted where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TR115\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160401727754,"sku":"TR115B","price":151.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54160401760522,"sku":"TR115R","price":151.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-tr115b.png?v=1794931287"},{"product_id":"cnc-racing-steering-tube-mv-agusta-brutale-675-2012-2015-psa04","title":"CNC Racing Steering Tube MV Agusta Brutale 675 (2012-2015) – PSA04","description":"\u003cp\u003eManufacturer CNC Racing names the MV Agusta Brutale 675 (2012-2015) as a target model for PSA04, the Steering Tube. Each section below answers one question about PSA04 and the Brutale 675, from material to approval. CNC Racing describes PSA04 as a part for the Brutale 675; our notes below add fitting and care advice.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003ePart of the triple clamps kit\u003c\/li\u003e\n\u003cli\u003eFits only the complete CNC Racing triple clamps kit\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eSteering tube made in stainless steel\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: MV Agusta Brutale 675, 2012-2015\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow It Is Built\u003c\/h2\u003e\u003cp\u003eDurable steel is the base of PSA04. Steel is heavier than aluminium, but for PSA04 its strength is what counts. The finish of PSA04 reflects careful production at CNC Racing.\u003c\/p\u003e\u003ch2\u003eGetting It Mounted\u003c\/h2\u003e\u003cp\u003eYou fit PSA04 in the top triple clamp assembly on top of the existing equipment. Nothing has to be removed: PSA04 joins the standard parts in the top triple clamp assembly. One order of PSA04 brings you one piece. Leave fitting PSA04 to a workshop if you are not experienced with motorcycle mechanics. Professional workshops bring the right equipment and routine to fit PSA04 correctly. If you lack the tools or experience for PSA04, leave the job to a workshop. Put small parts of PSA04 into a bowl while working, so none of them disappear.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eFor PSA04, gentle care is enough; it needs no special products. If PSA04 shows signs of wear, replace it before continuing to ride. Long periods outdoors in sun and rain can age the surface of PSA04.\u003c\/p\u003e\u003ch2\u003eTask on the Bike\u003c\/h2\u003e\u003cp\u003eThe steering tube PSA04 is manufactured from stainless steel for the triple clamps. PSA04 fits only on the complete triple clamps kit of CNC Racing and is not a stand-alone replacement.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eMatching your bike's colour scheme is possible with PSA04 in black.\u003c\/p\u003e\u003ch2\u003eFitment at a Glance\u003c\/h2\u003e\u003cp\u003eInter-Pace has copied the MV Agusta Brutale 675 (2012-2015) fitment of PSA04 directly out of CNC Racing's records. For motorcycles near the start or end of 2012-2015, a check of the exact Brutale 675 version is advisable. A note for owners of older Brutale 675 bikes: compare the year carefully with 2012-2015. For MV Agusta Brutale 800, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR there are matching pages of PSA04 in our catalogue. Fitment information for PSA04 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it. PSA04 fits only on the complete CNC Racing triple clamps kit.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eNo expert report or ABE: CNC Racing does not issue these for PSA04. If you plan to ride on public roads with PSA04, check the legal requirements first. For road use of PSA04, the laws of the country of registration apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSA04\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 675 (2012-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160450322698,"sku":"CNC-PSA04B","price":92.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psa04b.png?v=1794928797"},{"product_id":"cnc-racing-steering-tube-mv-agusta-brutale-800-2012-2015-psa04","title":"CNC Racing Steering Tube MV Agusta Brutale 800 (2012-2015) – PSA04","description":"\u003cp\u003eHere you will find PSA04 from CNC Racing, described as Steering Tube; the MV Agusta Brutale 800 (2012-2015) is its listed fitment. The headings below lead you through PSA04 for the Brutale 800, from construction to care. On the Brutale 800, PSA04 takes a defined place; the paragraphs below explain where and how.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eSteering tube made in stainless steel\u003c\/li\u003e\n\u003cli\u003ePart of the triple clamps kit\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eFits only the complete CNC Racing triple clamps kit\u003c\/li\u003e\n\u003cli\u003eMade to fit the MV Agusta Brutale 800 (2012-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eYou can choose PSA04 in black using the selector above.\u003c\/p\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003eThis page lists PSA04 for one motorcycle only: the MV Agusta Brutale 800 (2012-2015). Choose this listing only if your motorcycle is the MV Agusta Brutale 800 built 2012-2015. Imported bikes can differ from the European Brutale 800; compare the type code if in doubt. We present PSA04 separately for MV Agusta Brutale 675, MV Agusta Brutale 800 RR, MV Agusta Dragster 800 RR so that every page shows the right fitment. Send us your vehicle details and we will confirm whether PSA04 fits. PSA04 fits only on the complete CNC Racing triple clamps kit.\u003c\/p\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eSteel construction makes PSA04 hard-wearing. CNC Racing turns to steel for PSA04, where hardness and resilience come first. Carefully made from steel, PSA04 is built for long service.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eKeep solvents, brake cleaner and acidic products away from PSA04. Damage to PSA04 after a crash should be assessed by a specialist. Keep an eye on PSA04 after any tip-over in the garage.\u003c\/p\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003ePSA04 is a steering tube made in stainless steel for the triple clamp assembly. As a part of the complete CNC Racing triple clamps kit, PSA04 cannot be used with other triple clamps.\u003c\/p\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eIn the top triple clamp assembly, PSA04 is added as an accessory. The mounting point for PSA04 is in the top triple clamp assembly; no original part is removed. Every order of PSA04 includes one part. Once you have covered the first kilometres, retighten every fixing of PSA04. A qualified technician should check PSA04 after installation. Use only screws of the right length and grade for PSA04. Use a torque wrench so that every fixing of PSA04 ends up equally tight.\u003c\/p\u003e\u003ch2\u003ePaperwork and Approval\u003c\/h2\u003e\u003cp\u003ePlease note: CNC Racing does not provide approval documents for PSA04. In Germany, an inspection by an approved testing body may allow PSA04 to be entered in the vehicle papers. For road use of PSA04, the laws of the country of registration apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSA04\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 800 (2012-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160450552074,"sku":"CNC-PSA04B","price":92.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psa04b.png?v=1794928797"},{"product_id":"cnc-racing-steering-tube-mv-agusta-brutale-800-rr-2015-2016-psa04","title":"CNC Racing Steering Tube MV Agusta Brutale 800 RR (2015-2016) – PSA04","description":"\u003cp\u003eCNC Racing calls item PSA04 the Steering Tube; it is listed here for the MV Agusta Brutale 800 RR (2015-2016). To help you plan the upgrade of your Brutale 800 RR, the key facts about PSA04 are listed below. CNC Racing documents PSA04 per motorcycle, and the following sections apply to the Brutale 800 RR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003ePart of the triple clamps kit\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eSteering tube made in stainless steel\u003c\/li\u003e\n\u003cli\u003eFits only the complete CNC Racing triple clamps kit\u003c\/li\u003e\n\u003cli\u003eColour choice: black\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: MV Agusta Brutale 800 RR, 2015-2016\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is For\u003c\/h2\u003e\u003cp\u003ePSA04 is a steering tube made in stainless steel for the triple clamp assembly. As a part of the complete CNC Racing triple clamps kit, PSA04 cannot be used with other triple clamps.\u003c\/p\u003e\u003ch2\u003eChecking Your Model\u003c\/h2\u003e\u003cp\u003ePer CNC Racing, PSA04 has been engineered around the MV Agusta Brutale 800 RR (2015-2016). Bikes registered later than they were built can confuse matters; what counts for your Brutale 800 RR is the production date. If the build year of your Brutale 800 RR sits right on the border of 2015-2016, ask us to double-check. Inter-Pace splits PSA04 into one page per motorcycle, including MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Dragster 800 RR. The details on this page for PSA04 are as complete as CNC Racing's data allows. PSA04 fits only on the complete CNC Racing triple clamps kit.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eOrder PSA04 in black, depending on what suits your bike.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eDry PSA04 with a soft cloth after washing to avoid water marks. Every few thousand kilometres, take a closer look at PSA04. Inspect PSA04 as part of your seasonal check.\u003c\/p\u003e\u003ch2\u003eFitting Safely\u003c\/h2\u003e\u003cp\u003eAttach PSA04 in the top triple clamp assembly; the original parts remain where they are. Nothing has to be removed: PSA04 joins the standard parts in the top triple clamp assembly. CNC Racing delivers PSA04 as one piece. PSA04 belongs to the safety-related parts, so its fitting calls for expertise. Set off only when PSA04 has been fitted properly and works correctly. Use a torque wrench so that every fixing of PSA04 ends up equally tight. Inter-Pace recommends fitting PSA04 in a workshop if you are unsure.\u003c\/p\u003e\u003ch2\u003eMaterial Facts\u003c\/h2\u003e\u003cp\u003eCNC Racing turns to steel for PSA04, where hardness and resilience come first. PSA04 is a steel component, robust and dimensionally stable. Fine finishing gives PSA04 its final appearance.\u003c\/p\u003e\u003ch2\u003eApproval Situation\u003c\/h2\u003e\u003cp\u003eWe receive no ABE for PSA04 from CNC Racing. Whether an individual inspection of PSA04 is possible depends on the testing body. Check whether PSA04 must be entered in your vehicle documents.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSA04\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Brutale 800 RR (2015-2016)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160450617610,"sku":"CNC-PSA04B","price":92.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psa04b.png?v=1794928797"},{"product_id":"cnc-racing-steering-tube-mv-agusta-dragster-800-rr-2015-2017-psa04","title":"CNC Racing Steering Tube MV Agusta Dragster 800 RR (2015-2017) – PSA04","description":"\u003cp\u003eManufacturer CNC Racing names the MV Agusta Dragster 800 RR (2015-2017) as a target model for PSA04, the Steering Tube. Details about how PSA04 is built and how it goes onto the Dragster 800 RR are listed further down. Our description of PSA04 for the Dragster 800 RR is based on the information CNC Racing publishes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003eFits only the complete CNC Racing triple clamps kit\u003c\/li\u003e\n\u003cli\u003eSteering tube made in stainless steel\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable in black\u003c\/li\u003e\n\u003cli\u003ePart of the triple clamps kit\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: MV Agusta Dragster 800 RR, 2015-2017\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003eThe steering tube PSA04 is manufactured from stainless steel for the triple clamps. As a part of the complete CNC Racing triple clamps kit, PSA04 cannot be used with other triple clamps.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eAll standard parts stay on when PSA04 is fitted in the top triple clamp assembly. Fitting PSA04 in the top triple clamp assembly adds to the motorcycle without taking anything away. Delivery of PSA04 consists of one piece. A qualified technician should check PSA04 after installation. Do not ride if anything about PSA04 feels wrong after fitting; have it checked. Work slowly and without force when fitting PSA04. Place the motorcycle securely on a stand before working on PSA04.\u003c\/p\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eFor PSA04, the CNC Racing data shows the MV Agusta Dragster 800 RR (2015-2017) as a fitment. For motorcycles near the start or end of 2015-2017, a check of the exact Dragster 800 RR version is advisable. Unsure whether your bike counts as MV Agusta Dragster 800 RR? Send us the vehicle identification number and we will check. The search function leads you to PSA04 for MV Agusta Brutale 675, MV Agusta Brutale 800, MV Agusta Brutale 800 RR, too. Before ordering PSA04, it helps to have the vehicle identification number to hand. PSA04 fits only on the complete CNC Racing triple clamps kit.\u003c\/p\u003e\u003ch2\u003eMaterial Profile\u003c\/h2\u003e\u003cp\u003eSteel construction makes PSA04 hard-wearing. PSA04 is manufactured from steel, a tough metal that tolerates heavy loads. Precise shaping and careful finishing are part of every PSA04.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eYou can choose PSA04 in black using the selector above.\u003c\/p\u003e\u003ch2\u003eMaintenance Tips\u003c\/h2\u003e\u003cp\u003eWhen cleaning PSA04, work from top to bottom with a soft sponge. Note any change in how PSA04 sits or works and have it checked. Check PSA04 for firm fit from time to time, especially after long rides.\u003c\/p\u003e\u003ch2\u003eRoad Approval Notes\u003c\/h2\u003e\u003cp\u003eWe receive no ABE for PSA04 from CNC Racing. Rules for accessories like PSA04 vary across Europe. We recommend clarifying the use of PSA04 with a recognised inspection body.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSA04\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e MV Agusta Dragster 800 RR (2015-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160450781450,"sku":"CNC-PSA04B","price":92.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psa04b.png?v=1794928797"},{"product_id":"cnc-racing-bottom-yoke-52-mm-ducati-scrambler-800-2015-2024-psb08","title":"CNC Racing Bottom Yoke Ø 52 mm Ducati Scrambler 800 (2015-2024) – PSB08","description":"\u003cp\u003eCNC Racing lists PSB08, its bottom yoke ø 52 mm, for the Ducati Scrambler 800 (2015-2024). Below, Inter-Pace sums up what CNC Racing says about PSB08 and what it means for the Scrambler 800. The CNC Racing range covers many motorcycles; this page deals only with PSB08 on the Scrambler 800.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eRespects the OEM angle of inclination\u003c\/li\u003e\n\u003cli\u003eLight alloy machined from solid\u003c\/li\u003e\n\u003cli\u003eDiameter 52 mm\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Scrambler 800 (2015-2024)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eSoft cloths and neutral cleaners are all PSB08 needs for routine care. A careful look at PSB08 after off-road or track use is advisable. Look over PSB08 at every service and replace it if damaged.\u003c\/p\u003e\u003ch2\u003eBike and Build Year\u003c\/h2\u003e\u003cp\u003eCNC Racing specifies PSB08 for the Ducati Scrambler 800 with build dates 2015-2024. Should your Scrambler 800 lie outside 2015-2024, please ask us before ordering PSB08. Not sure which version your Scrambler 800 is? Our team will gladly look it up for you. The manufacturer's data for PSB08 also mentions Ducati Scrambler Classic, Ducati Scrambler Icon. For a reliable answer on PSB08, give us the exact model designation from your papers. PSB08 fits only the complete triple clamps kit with the upper triple clamp PST09B (Ø 51 mm) and the steering tube PSA08B.\u003c\/p\u003e\u003ch2\u003eIts Job\u003c\/h2\u003e\u003cp\u003ePSB08 is a bottom yoke that respects the OEM angle of inclination, so the steering geometry is kept. PSB08 has a diameter of 52 mm and is made from solid light alloy with an anodised surface.\u003c\/p\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eAs a replacement part, PSB08 goes on instead of the original bottom yoke on the steering head. After removing the original bottom yoke on the steering head, PSB08 is fitted. One order of PSB08 brings you one piece. PSB08 belongs to the safety-related parts, so its fitting calls for expertise. Inspect the fitting of PSB08 after the first kilometres on the road. Fitting PSB08 is easier with a second pair of hands. Before fitting PSB08, compare it with the part it goes next to or replaces.\u003c\/p\u003e\u003ch2\u003eColour Line-Up\u003c\/h2\u003e\u003cp\u003ePSB08 comes in black, as listed by CNC Racing.\u003c\/p\u003e\u003ch2\u003eBuild and Material\u003c\/h2\u003e\u003cp\u003eAluminium gives PSB08 a low weight compared with steel parts of similar size. The metal used for PSB08 is aluminium, valued in motorsport for its low density. PSB08 is finished to CNC Racing's production standard.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eFor PSB08, no ABE or Teilegutachten is available from the maker CNC Racing. National laws decide whether PSB08 may be fitted for road use. An expert inspection can clarify if PSB08 is acceptable on your motorcycle in road traffic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler 800 (2015-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160492134666,"sku":"PSB08B","price":431.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb08b.png?v=1794928805"},{"product_id":"cnc-racing-bottom-yoke-52-mm-ducati-scrambler-classic-2015-2018-psb08","title":"CNC Racing Bottom Yoke Ø 52 mm Ducati Scrambler Classic (2015-2018) – PSB08","description":"\u003cp\u003eCNC Racing calls item PSB08 the Bottom Yoke Ø 52 mm; it is listed here for the Ducati Scrambler Classic (2015-2018). Here we set out the essentials of PSB08 for your Scrambler Classic in plain terms. Fitment details for the Scrambler Classic, delivery contents and care advice for PSB08 follow in the sections below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eLight alloy machined from solid\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black\u003c\/li\u003e\n\u003cli\u003eAnodised\u003c\/li\u003e\n\u003cli\u003eFixing screws in lightened stainless steel included\u003c\/li\u003e\n\u003cli\u003eDiameter 52 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eRespects the OEM angle of inclination\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original bottom yoke\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Scrambler Classic, 2015-2018\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eThe aluminium construction of PSB08 keeps the added weight small. Aluminium, the material of PSB08, can be machined to fine detail. Aluminium as the base and careful processing define PSB08.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eThe finish of PSB08 is offered in black.\u003c\/p\u003e\u003ch2\u003eDoes It Suit Your Motorcycle?\u003c\/h2\u003e\u003cp\u003eOn CNC Racing's model list, the Ducati Scrambler Classic (2015-2018) appears as a match for PSB08. To be on the safe side, compare model, version and year of your Scrambler Classic with this page. Make sure the model name on your registration matches Ducati Scrambler Classic exactly. The search function leads you to PSB08 for Ducati Scrambler 800, Ducati Scrambler Icon, too. If the photos of PSB08 do not look like the part on your motorcycle, ask us before ordering. PSB08 fits only the complete triple clamps kit with the upper triple clamp PST09B (Ø 51 mm) and the steering tube PSA08B.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eWipe PSB08 down regularly so that dirt does not build up. Check PSB08 again after the first rides to see that it is still firmly in place. Keep an eye on PSB08 after any tip-over in the garage.\u003c\/p\u003e\u003ch2\u003eFunction Notes\u003c\/h2\u003e\u003cp\u003eThe fixing screws in lightened stainless steel are already included with PSB08. The lower plate PSB08 works only in the complete triple clamps kit with the matching upper plate and steering tube.\u003c\/p\u003e\u003ch2\u003eOn to the Bike\u003c\/h2\u003e\u003cp\u003eMounted on the steering head, PSB08 is used in lieu of the original bottom yoke. CNC Racing's PSB08 is fitted on the steering head in exchange for the original bottom yoke. One part, number PSB08, is what you receive. After fitting PSB08, check that all related functions work correctly before riding. A short check of all screws on PSB08 after the first trip is advisable. Do not force PSB08 into position; if it does not fit, check the cause. If PSB08 needs adjusting, do so before final tightening.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eYou will not receive an ABE with PSB08; CNC Racing does not offer one. We recommend clarifying the use of PSB08 with a recognised inspection body. Before road use, find out whether PSB08 has to be registered in your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PSB08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler Classic (2015-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54160492331274,"sku":"PSB08B","price":431.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-psb08b.png?v=1794928805"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/HeadstockInserts.png?v=1785222907","url":"https:\/\/inter-pace.com\/en-mn\/collections\/geometry-accessories.oembed?page=3","provider":"Inter-Pace","version":"1.0","type":"link"}