{"product_id":"ohlins-shock-spring-40-n-mm-340-mm-70-mm-06772-07","title":"Öhlins Shock Spring 40 N\/mm \/ 340 mm \/ Ø 70 mm – 06772-07","description":"\u003cp\u003eÖhlins part number 06772-07 is a shock absorber spring rated at 40 N\/mm, 340 mm long with a 70 mm inner diameter. Adding a pillion or luggage changes the load enough that the standard rate stops working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e200 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eFree length 340 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 70 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 40 N\/mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06772-07\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. The wire is progressively wound where the application calls for it and straight where it does not. Two units carrying the same part number behave the same way out of the box, which is the whole point of testing each one.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eFree length 340 mm, inner diameter 70 mm, rate 40 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eFrom here it is easy to move one step in either direction once you have ridden it. Rates here suit a solo rider of typical weight on a road-going machine. This is the middle of Öhlins' range — the rate most riders of average weight end up on once sag is set properly. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eA shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. On a linkage-equipped machine the wheel moves several millimetres for every millimetre the damper moves, and the spring rate has to account for that ratio.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider? This spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. A spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eAny suspension workshop can fit these; the fork does not need to leave the bike for long. Work on both legs in one session so the fork stays symmetrical. The job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: no separate certificate. The spring changes the rate, not the construction of the fork, and is treated as a service part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting matters as much as the part. We are an authorised Öhlins service centre and carry out installation, servicing and setup ourselves — get in touch and we will arrange it alongside your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06772-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 40 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 340 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645367509258,"sku":"06772-07","price":70300.0,"currency_code":"XOF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_8b862859-46c8-46f5-b0da-b9e58dc82ce9.png?v=1788866806","url":"https:\/\/inter-pace.com\/en-ml\/products\/ohlins-shock-spring-40-n-mm-340-mm-70-mm-06772-07","provider":"Inter-Pace","version":"1.0","type":"link"}