{"product_id":"ohlins-shock-spring-85-n-mm-260-mm-70-mm-06774-25","title":"Öhlins Shock Spring 85 N\/mm \/ 260 mm \/ Ø 70 mm – 06774-25","description":"\u003cp\u003eÖhlins part number 06774-25 is a shock absorber spring rated at 85 N\/mm, 260 mm long with a 70 mm inner diameter. A rear spring matched to rider and load keeps the chassis attitude where the factory intended it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 260 mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 70 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 85 N\/mm\u003c\/li\u003e\n\u003cli\u003e133 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06774-25\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins publishes recommended sag figures for its springs, so the setup has a reference rather than a feel. The finish is applied after setting, which means the coating does not affect the rate. Production has stayed in Sweden since the company was founded in 1976.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 70 mm bore and 260 mm length are the two figures that decide whether it physically fits; 85 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eChoosing 85 N\/mm\u003c\/h2\u003e\u003cp\u003eFirm rates trade some small-bump comfort for support — the right trade on a good surface at speed. A firm rate holds the chassis attitude when the front or rear is loaded hard. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eRear spring rates run in the tens or hundreds of N\/mm because the spring sits at the short end of that lever, not at the wheel. Öhlins supplies most of its shocks without a spring precisely so the rate can be matched to the rider rather than averaged. Two riders 20 kg apart on the same motorcycle genuinely need different rates, not different clicks.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eA workshop will pick this spring from its dimensions and the rider's weight, not from a fitment table. Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eIf the fork has not been serviced recently, bushes and seals are worth replacing while it is apart. Work on both legs in one session so the fork stays symmetrical. Rate and preload are separate adjustments: get the rate right first, then set sag with preload.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: no separate certificate. The spring changes the rate, not the construction of the fork, and is treated as a service part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06774-25\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 85 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 260 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 133 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645370294538,"sku":"06774-25","price":7100.0,"currency_code":"MKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_98c2e25f-a81f-4353-b5f3-4d184106936f.png?v=1788866826","url":"https:\/\/inter-pace.com\/en-mk\/products\/ohlins-shock-spring-85-n-mm-260-mm-70-mm-06774-25","provider":"Inter-Pace","version":"1.0","type":"link"}