{"product_id":"ohlins-shock-spring-41-n-mm-200-mm-46-mm-00180-94","title":"Öhlins Shock Spring 41 N\/mm \/ 200 mm \/ Ø 46 mm – 00180-94","description":"\u003cp\u003eÖhlins part number 00180-94 is a shock absorber spring rated at 41 N\/mm, 200 mm long with a 46 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 41 N\/mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003cli\u003e105 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00180-94\u003c\/li\u003e\n\u003cli\u003eFree length 200 mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eÖhlins machines its own critical components instead of buying them in, and the tolerances are where the money goes. Öhlins manufactures in Upplands Väsby, north of Stockholm, and assembles and tests every unit there before it ships. The Öhlins part number is stamped on the unit, so its specification can be looked up years later.\u003c\/p\u003e\u003ch2\u003eThe Numbers That Matter\u003c\/h2\u003e\u003cp\u003eThe 46 mm bore and 200 mm length are the two figures that decide whether it physically fits; 41 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eMid rates suit a solo rider on a road-going machine with occasional spirited use. This is where most riders of average weight land once static sag has been set to specification. If you are unsure and close to average weight in full kit, this is the sensible starting point. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eÖhlins sells rear springs separately precisely because rider weight varies more than machine weight does. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. Adding a pillion or luggage changes the rear load enough that the standard rate stops working properly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it. Öhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider? Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eOil level is measured from the top of the tube with the fork compressed and the spring removed. Any suspension workshop can fit these; the fork does not need to leave the bike for long. Öhlins states an air gap for this application, and that figure is part of the setting rather than a detail.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: none is issued for springs as such — they replace an existing component of the same function. Any model-specific approval is listed under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins components deliver what they promise once they are fitted and set up properly. As an authorised Öhlins service centre we do exactly that in house — installation, service and setup. Simply ask if you would like us to take care of it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00180-94\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 41 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 105 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645315014922,"sku":"00180-94","price":4200.0,"currency_code":"MKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_a9487600-3ebe-44a2-8cf9-0328f9f94dfb.png?v=1788866513","url":"https:\/\/inter-pace.com\/en-mk\/products\/ohlins-shock-spring-41-n-mm-200-mm-46-mm-00180-94","provider":"Inter-Pace","version":"1.0","type":"link"}