{"title":"Mudguards","description":"\u003cp\u003eFront fender extensions, rear huggers and beak extenders — protect your engine, radiator and undertail from road spray and debris.\u003c\/p\u003e","products":[{"product_id":"puig-rear-mudguard-honda-cbr-1000-rr-r-sc82","title":"Puig Rear Mudguard Honda CBR 1000 RR-R SC82 (2020-2026) - 3mm ABS, ABE Approved","description":"\u003cp\u003eConstructed from 3 mm high-impact ABS plastic with UV-stable finish, the Puig rear mudguard for the Honda CBR 1000 RR-R SC82 is a precision-engineered fairing component built to the same exacting standard as the Fireblade it dresses. Where lesser mudguards simply bolt on, this one is shaped through aerodynamic study to actively reduce rear-wheel turbulence while delivering measurably greater coverage than the OEM part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 mm high-impact ABS construction — UV-resistant, impact-resistant and built for long-term durability in all conditions\u003c\/li\u003e\n\u003cli\u003e135 mm longer and 40 mm taller than the original Honda mudguard, directing water, mud and stone debris away from the rider, shock absorber, swingarm and underside\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised profile, developed through wind-tunnel-informed testing to reduce turbulence at the rear wheel for a more settled ride\u003c\/li\u003e\n\u003cli\u003eRace-inspired styling that matches the aggressive lines of the CBR 1000 RR-R without visual compromise\u003c\/li\u003e\n\u003cli\u003eHolds ABE (Allgemeine Betriebserlaubnis) type approval — fully road-legal in Germany and TÜV-compliant, no registration entry required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment with all mounting hardware and a clear installation guide included; fitting takes approximately 10 minutes with no modification to the motorcycle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig's choice of 3 mm ABS is deliberate: the material offers the right balance of rigidity and flex to absorb road debris impacts without cracking, while its UV-stabilised surface resists fading and surface degradation season after season. The finish is consistent across the entire panel, so the matte black and carbon-look variants both hold their appearance under prolonged exposure to road grime, heat and UV. Every edge is cleanly trimmed and the mounting points align precisely with the SC82 subframe — no rattles, no adjustments, no gaps.\u003c\/p\u003e\u003ch3\u003eAerodynamic Development\u003c\/h3\u003e\u003cp\u003eThe geometry is not simply stretched from the stock mudguard. Puig invested in aerodynamic testing to shape the rear extension so that air separation at the rear wheel is managed rather than disrupted, contributing to a calmer rear-end feel at speed. The result is a component that earns its place on both road and track without compromise.\u003c\/p\u003e\u003ch2\u003eReal-World Gains\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSignificantly cleaner tail section in wet weather, reducing spray on rider and pillion\u003c\/li\u003e\n\u003cli\u003eReduced dirt accumulation on the shock absorber, swingarm linkage and undertray\u003c\/li\u003e\n\u003cli\u003eBetter protection of sensitive mechanical components in mixed conditions\u003c\/li\u003e\n\u003cli\u003eA sharper, more purposeful rear-end appearance in line with the RR-R's race-derived aesthetics\u003c\/li\u003e\n\u003cli\u003eCohesive visual result when combined with other Puig fairing components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis mudguard is designed exclusively for the Honda CBR 1000 RR-R SC82, covering model years 2020 through 2026. It is a direct, no-modification replacement that retains all OEM mounting points. Available in two finishes to suit different build directions: matte black (REF. 20488J) and carbon look (REF. 20488C).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePuig\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eRear mudguard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3 mm high-impact ABS plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003eapprox. 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 245 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eapprox. 445 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize vs. OEM\u003c\/td\u003e\n\u003ctd\u003e135 mm longer, 40 mm taller than original\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProperties\u003c\/td\u003e\n\u003ctd\u003eUV-resistant, impact-resistant, aerodynamically optimised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType approval\u003c\/td\u003e\n\u003ctd\u003eABE (Allgemeine Betriebserlaubnis) — road-legal, TÜV-compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eMatte black (REF. 20488J) \/ Carbon look (REF. 20488C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, approx. 10 minutes, no motorcycle modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matte Black","offer_id":53168549462282,"sku":"20488J","price":141.99,"currency_code":"EUR","in_stock":true},{"title":"Carbon Look","offer_id":53168549495050,"sku":"20488C","price":153.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/7_7700a0c9-3e86-43d2-95c2-7e8c9c20aa5f.png?v=1780808499"},{"product_id":"puig-front-fender-extension-kawasaki-z500-se-2024-2026","title":"Puig Front Fender Extension for Kawasaki Z500 \/ SE (2024–2026)","description":"\u003cp\u003eWhen you're pushing your Z500 hard, whether carving a favourite backroad or chasing lap times, the last thing you need is grit, mud and standing water kicked up into your radiator, engine and face. This Puig front fender extension bolts straight onto the factory mudguard and extends its splash-blocking reach, giving you real front tyre hugger protection exactly where it matters most under load.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends coverage of the OEM front fender for genuinely improved anti-splash guard performance\u003c\/li\u003e\n\u003cli\u003eMoulded from durable ABS plastic that shrugs off stone chips and repeated debris strikes\u003c\/li\u003e\n\u003cli\u003eHelps shield the radiator and engine internals from thrown-up water, mud and road debris\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original mudguard\u003c\/li\u003e\n\u003cli\u003eFinished in black to blend seamlessly with the Z500's factory styling\u003c\/li\u003e\n\u003cli\u003eLightweight at just 106 g, so there's no noticeable impact on handling or front-end feel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for hard riding, not just looks\u003c\/h3\u003e\u003cp\u003ePuig engineers this front mudguard extension as a functional upgrade rather than a cosmetic add-on. On track days and fast road miles, engine splash protection and radiator protection become genuinely valuable as speeds rise and standing water or loose surface debris gets thrown further and harder. The ABS construction is chosen specifically for its impact resistance, so this fender extender keeps doing its job ride after ride, session after session.\u003c\/p\u003e\u003ch3\u003eStraightforward fitment\u003c\/h3\u003e\u003cp\u003eThe extension mounts directly to your Z500's original front fender using the supplied plastic rivets, giving a permanent and vibration-resistant attachment without any drilling or trimming. Puig fitting notes are included to make the assembly quick and accurate.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Z500 \/ SE (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e106 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367748985098,"sku":"1940N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1940N.png?v=1787730487"},{"product_id":"puig-front-fender-extension-kawasaki-z400-2019-2024","title":"Puig Front Fender Extension for Kawasaki Z400 (2019–2024)","description":"\u003cp\u003eRide further, longer, and more comfortably knowing your Kawasaki Z400 is shielded from the grit, mud and stones that road riding throws up. This Puig front fender extension bolts onto your bike's original mudguard and quietly gets on with the job of keeping spray and debris off you, your engine and your radiator, mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends front mudguard coverage to reduce road debris protection gaps\u003c\/li\u003e\n\u003cli\u003eActs as an effective front tyre hugger, cutting down on water, mud and stone strikes\u003c\/li\u003e\n\u003cli\u003eHelps shield the engine and radiator from splash and grime with genuine anti-splash guard performance\u003c\/li\u003e\n\u003cli\u003eMoulded in durable, impact-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the factory look of your Z400\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the OEM fender\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for Everyday Comfort and Confidence\u003c\/h3\u003e\u003cp\u003eA well-fitted front mudguard extension does more than tidy up the look of your bike — it keeps your boots, legs and lower fairings drier and cleaner on every ride, whether you're commuting through wet streets or heading out on a longer tour. This fender extender is designed to sit neatly against the original fender line, so it never feels like an afterthought bolted on as an extra. The result is a cleaner ride, less cleaning afterwards, and better splash protection exactly where you need it, day after day.\u003c\/p\u003e\u003ch3\u003eStraightforward Fitment\u003c\/h3\u003e\u003cp\u003ePuig includes the plastic rivets required to attach the extension directly to your Z400's factory mudguard, along with fitting guidance to help you get it positioned correctly first time.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the Kawasaki Z400 (2019–2024).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunctional: It improves the protection of the original fender\u003c\/li\u003e\n\u003cli\u003eMaterial: Manufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/li\u003e\n\u003cli\u003eWeight: 106 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367751311626,"sku":"1940N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1940N_d2e22b5e-cd98-40c1-adb5-1ba2b664b0f1.png?v=1787730490"},{"product_id":"puig-front-fender-extension-kawasaki-ninja-500-2024-2026","title":"Puig Front Fender Extension for Kawasaki Ninja 500 (2024–2026)","description":"\u003cp\u003eEveryday riding means everyday road grime, wet spray and flying debris, and this Puig front fender extension is the simple, low-cost fix that keeps it off your engine, radiator and yourself. Built specifically for the Kawasaki Ninja 500 (2024–2026), it bolts straight onto your existing mudguard for an instant upgrade in weather protection without altering the bike's look.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the front mudguard for genuine anti-splash and road debris protection\u003c\/li\u003e\n\u003cli\u003eHelps shield the engine and radiator from spray thrown up by the front tyre\u003c\/li\u003e\n\u003cli\u003eMade from durable ABS plastic that resists impacts from stones and grit\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the factory fender\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a permanent, secure fit to the OEM fender\u003c\/li\u003e\n\u003cli\u003eLightweight design at just 106 g, so there's no noticeable effect on handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEveryday Practicality, Built to Last\u003c\/h3\u003e\u003cp\u003eThis isn't a track-only accessory - it's designed for riders who commute, tour or simply want their Ninja 500 to stay cleaner and better protected in everyday conditions. Acting as a front fender extender and mudguard extension in one, it adds a genuine layer of engine splash protection and radiator protection, particularly useful on wet roads or gravel tracks where road debris protection matters most.\u003c\/p\u003e\u003ch3\u003eSimple, Secure Installation\u003c\/h3\u003e\u003cp\u003ePuig includes plastic rivets so the extension mounts permanently to your motorcycle's original front fender, with no glue or drilling required for this reference. Fitting is straightforward and can be completed with basic tools, giving you a factory-look finish in minutes.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eKawasaki Ninja 500 (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e106 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367754490122,"sku":"1940N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1940N_19401370-d86c-47eb-a8f1-205da595a61c.png?v=1787730494"},{"product_id":"puig-front-fender-extension-kawasaki-ninja-400-2018-2024","title":"Puig Front Fender Extension for Kawasaki Ninja 400 (2018–2024)","description":"\u003cp\u003eBuilt in tough ABS plastic and finished in black, this Puig front fender extension adds serious extra coverage to the OEM mudguard on your Kawasaki Ninja 400, keeping road spray, grit and debris off the radiator, engine and lower fairings.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImpact-resistant ABS plastic construction for long-lasting durability\u003c\/li\u003e\n\u003cli\u003eExtends the coverage of the original front fender for improved anti-splash protection\u003c\/li\u003e\n\u003cli\u003eActs as a front tyre hugger, reducing road debris thrown up at speed\u003c\/li\u003e\n\u003cli\u003eHelps shield the radiator and engine from water, mud and stone chips\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the factory bodywork\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the OEM fender\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePremium Build, Purpose-Made Fit\u003c\/h2\u003e\u003cp\u003ePuig engineers this fender extension specifically for the Ninja 400, so it mounts cleanly onto the factory front mudguard without modification. The ABS material is chosen for its resistance to impacts and everyday wear, making it a genuine upgrade in front mudguard extension durability rather than a flimsy aftermarket add-on. Fitting is straightforward using the supplied plastic rivets, and Puig includes assembly tips to help you get the mudguard extension positioned correctly first time.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned to fit the Kawasaki Ninja 400 (2018–2024).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e106 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367755931914,"sku":"1940N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1940N_0ba2d6de-de6b-4368-93ea-20f3a61c1c28.png?v=1787730497"},{"product_id":"puig-front-mudguard-extension-bmw-f800gs-2024-2026","title":"Puig Front Mudguard Extension for BMW F800GS (2024–2026)","description":"\u003cp\u003ePuig's front mudguard extension for the BMW F800GS brings purposeful engineering and a clean, integrated aesthetic to one of BMW's most capable adventure machines. Finished in a deep, understated black that complements the factory mudguard, this ABS-moulded extender is the kind of detail that looks factory-fitted while meaningfully expanding the protection envelope of your bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the coverage of the original front mudguard, reducing road debris, mud and water spray reaching the engine, radiator and lower frame\u003c\/li\u003e\n\u003cli\u003eFormed from high-impact ABS plastic — tough, lightweight at just 106 g, and resistant to the stone strikes and flex forces that a front mudguard absorbs on every ride\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates seamlessly with the stock F800GS colour scheme for a factory-tidy appearance\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the OEM mudguard — no drilling into the frame or fairing required\u003c\/li\u003e\n\u003cli\u003ePuig includes fitment tips with every unit to make installation straightforward, even for home mechanics\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the F800GS rather than adapted from a generic template — correct curvature and mounting geometry for this generation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been developing motorcycle accessories from their Barcelona base for decades, and the finish quality on this extension reflects that experience. The black ABS surface is moulded to a consistent texture that ages well under UV and road grime, avoiding the chalky fade that cheaper aftermarket plastics suffer after a single season. Where some generic extenders look bolted-on as an afterthought, the Puig unit follows the profile of the BMW's original mudguard closely, making the combined assembly appear cohesive rather than improvised.\u003c\/p\u003e\u003cp\u003ePuig produces model-specific extensions across the full spectrum of motorcycle categories — naked, sport-touring, adventure and crosstourer — so the geometry here is optimised for the F800GS rather than shared with a dozen unrelated fitments. Every curve is intentional.\u003c\/p\u003e\u003ch2\u003eProtection on Road and Trail\u003c\/h2\u003e\u003cp\u003eThe F800GS is at home on both tarmac and gravel, and the front wheel throws up an impressive volume of debris in either environment. The factory mudguard does a reasonable job, but its coverage stops short of the lower engine casings and radiator on fast, wet roads or loose tracks. This Puig front fender extension bridges that gap — acting as an anti-splash guard and road debris shield that keeps mud, grit and water away from components that are expensive to repair and critical to reliability. Riders who commute in poor weather will also notice the reduction in spray reaching their boots and lower legs.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extender is designed and verified to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW F800GS (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe extension mounts directly to the OEM front mudguard using the supplied plastic rivets, requiring no modification to the original component. Installation tips are included in the packaging.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e106 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367756652810,"sku":"1941N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1941N2.png?v=1787730503"},{"product_id":"puig-front-mudguard-extension-bmw-f750gs-2018-2024","title":"Puig Front Mudguard Extension for BMW F750GS (2018–2024)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, the Puig front mudguard extension for the BMW F750GS (2018–2024) is a purpose-built upgrade that takes the factory fender's protection to a genuinely useful level. Where the stock mudguard falls short, this precisely formed extension intercepts road debris, standing water and grit before they reach the engine, radiator and lower bodywork — keeping your adventure bike cleaner and better protected on every ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-impact ABS plastic construction delivers excellent rigidity and long-term resistance to stone strikes, UV exposure and temperature cycling.\u003c\/li\u003e\n\u003cli\u003eExtends the coverage of the original front fender, providing meaningful engine splash protection and radiator protection against mud and road debris.\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment to the OEM mudguard — no drilling, no bracket fabrication.\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates neatly with the F750GS's existing bodywork and fender colour.\u003c\/li\u003e\n\u003cli\u003eWeighing just 106 g, the extension adds negligible unsprung mass while delivering a measurable gain in anti-splash guard performance.\u003c\/li\u003e\n\u003cli\u003ePuig includes fitment guidance tips in the box to simplify correct positioning and installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig has manufactured this front fender extender from ABS plastic — the same material class chosen by OEM bodywork engineers for its balance of impact resistance, low weight and dimensional stability. The moulding is precise enough to sit flush against the original BMW mudguard without gaps or stress points, and the surface finish is consistent throughout. Plastic rivets, rather than metal fasteners, are the correct choice here: they flex with the fender under fork movement and eliminate any risk of galvanic corrosion between dissimilar metals. The result is a front splash guard that feels like a factory accessory rather than an afterthought.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Trail\u003c\/h2\u003e\u003cp\u003eThe F750GS is at home on both tarmac and gravel, and in both environments the front tyre throws a constant stream of water, mud and small stones rearward. The stock mudguard manages this adequately at low speed, but at touring pace or in wet conditions the gap between the fender tip and the engine becomes a direct channel for road debris. This front mudguard extension closes that gap, shielding the lower engine cases, oil cooler lines and radiator from the sustained impact of road debris that would otherwise accelerate wear on seals, hoses and painted surfaces. The geometry is specific to the F750GS fork and fender profile, so coverage is optimised rather than approximate.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW F750GS (2018–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe extension mounts directly to the motorcycle's original front mudguard using the supplied plastic rivets. No modification to the OEM fender is required. Puig reference number: 1941.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e106 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53367758487818,"sku":"1941N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1941N2_1067b08a-f616-4d0e-9d83-ac364a5fade2.png?v=1787730507"},{"product_id":"puig-rear-fender-extension-honda-cb1000r-neo-sports-cafe-2018-2025","title":"Puig Rear Fender Extension for Honda CB1000R NEO Sports Cafe (2018–2025)","description":"\u003cp\u003eGive the Neo Sports Cafe's minimalist tail a finishing touch that's as functional as it is faithful to its retro-modern styling. This Puig rear fender extension bolts onto the original fender in a matt black finish that disappears seamlessly into the CB1000R's factory lines, adding proper tyre hugger protection without disrupting Honda's clean, café-racer silhouette.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Puig rear fender extension engineered specifically for the Honda CB1000R NEO Sports Cafe\u003c\/li\u003e\n\u003cli\u003eActs as an effective rear mudguard extension, chain splash guard and anti-splash guard against road spray and thrown-up debris\u003c\/li\u003e\n\u003cli\u003eMoulded in tough ABS for durability against stone chips and everyday impacts\u003c\/li\u003e\n\u003cli\u003eMatt black finish matches the factory fender and preserves the bike's understated aesthetic\u003c\/li\u003e\n\u003cli\u003eMounts directly over the original fender for a rear hugger look with minimal visual bulk\u003c\/li\u003e\n\u003cli\u003eSupplied with Puig mounting screws for a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConsidered Design, Genuine Protection\u003c\/h3\u003e\u003cp\u003ePuig has long built a reputation on parts that respect a motorcycle's original design language while adding real-world usefulness. This rear fender extension continues that heritage: it's not a bolted-on afterthought but a shaped, purpose-built undertail fender piece that extends the coverage of the stock unit, cutting down on the mud flap effect of water and grit being flicked onto the shock, subframe and rider.\u003c\/p\u003e\u003ch3\u003eFitment Note\u003c\/h3\u003e\u003cp\u003eInstallation is straightforward and uses the factory fender as its mounting base, with Puig-supplied screws included. Drilling holes into the original fender is required to complete the fitment. Puig also provides a downloadable guide with practical tips to make assembly easier — ask us for the link if you need it.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CB1000R NEO Sports Cafe (2018–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e126 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367759700234,"sku":"1803J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_1_ad14a6c9-6533-45be-bbce-d74e137cbfdf.png?v=1784116596"},{"product_id":"puig-rear-fender-extension-honda-cb1000r-black-edition-2021-2025","title":"Puig Rear Fender Extension for Honda CB1000R Black Edition (2021–2025)","description":"\u003cp\u003eThe CB1000R Black Edition has a purposeful, blacked-out streetfighter stance, and Puig's rear fender extension carries that design language straight through to the tail. Finished in matt black to disappear seamlessly against the original fender, it's a rear hugger extension built to keep grit, mud and spray off your rear shock and undertail without disrupting the bike's minimalist silhouette.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends coverage of the factory rear mudguard as a proper rear tyre hugger and anti-splash guard\u003c\/li\u003e\n\u003cli\u003eMoulded from ABS for genuine impact resistance on road and trail-crossed routes\u003c\/li\u003e\n\u003cli\u003eMatt black finish matches the Black Edition's blacked-out aesthetic, not just bolted on but designed in\u003c\/li\u003e\n\u003cli\u003eDoubles as a chain splash guard, shielding drivetrain components from thrown-up road debris\u003c\/li\u003e\n\u003cli\u003eSupplied with mounting screws for a secure, vibration-resistant fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign First, Function Follows\u003c\/h3\u003e\u003cp\u003eRather than a generic bolt-on mud flap, this fender extension is shaped and finished specifically for the CB1000R Black Edition, so it reads as an OEM-style upgrade rather than an aftermarket afterthought. The result is a rear undertail fender line that looks factory-fitted while doing a genuinely better job of keeping the rear end clean.\u003c\/p\u003e\u003ch3\u003eFitting Notes\u003c\/h3\u003e\u003cp\u003eThe extension mounts over the top of the original fender using the screws supplied by Puig. Fitting requires drilling holes into the original part, so this is a permanent modification best carried out with basic tools and a careful hand. Puig also provides a downloadable fitting guide with tips to make installation straightforward.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CB1000R Black Edition (2021–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e126 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367760978186,"sku":"1803J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_1_c77f16a6-541d-4caa-a207-93b7ed147369.png?v=1784116596"},{"product_id":"puig-rear-fender-extension-kawasaki-z500-se-2024-2026","title":"Puig Rear Fender Extension for Kawasaki Z500 \/ SE (2024–2026)","description":"\u003cp\u003eEngineered from impact-resistant ABS and finished in a clean matte black, this Puig rear fender extension is built to the same exacting standard as the brand's competition-proven bodywork accessories. Fitting directly over the Kawasaki Z500 and Z500 SE's original rear mudguard, it dramatically increases rear tyre coverage to keep road spray, chain lube, and road grime away from the undertail and surrounding components.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high-grade acrylonitrile butadiene styrene (ABS) — a material chosen for its exceptional resistance to impacts, UV exposure, and road chemicals.\u003c\/li\u003e\n\u003cli\u003eMatte black factory finish integrates seamlessly with the Z500's standard bodywork without disrupting the motorcycle's visual lines.\u003c\/li\u003e\n\u003cli\u003eExtends the coverage of the original rear fender, acting as a rear tyre hugger and chain splash guard to reduce drivetrain contamination.\u003c\/li\u003e\n\u003cli\u003eLightweight at just 376 g — adds meaningful protection without burdening the tail end.\u003c\/li\u003e\n\u003cli\u003eSupplied with all fixing screws required for a secure, rattle-free fitment.\u003c\/li\u003e\n\u003cli\u003ePuig provides downloadable assembly guidance to make installation straightforward, even for home mechanics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig has long been a benchmark for quality in motorcycle bodywork accessories, and this rear mudguard extension reflects that reputation in every detail. The ABS construction offers a toughness that cheaper polypropylene or thin plastic alternatives simply cannot match — it absorbs minor impacts from road debris without cracking or distorting. The matte black surface is moulded-in rather than painted on, which means it resists stone chips and does not peel at the edges over time. At 376 g, the part is genuinely lightweight, and the dimensional precision of Puig's tooling ensures a flush, factory-style fit against the Z500's stock fender profile.\u003c\/p\u003e\u003ch2\u003ePerformance and Protection\u003c\/h2\u003e\u003cp\u003eThe rear fender extension works by lengthening the arc of the original mudguard, converting it into a more effective rear splash guard. The extended coverage intercepts tyre spray before it reaches the swingarm pivot, the rear shock absorber linkage, and the undertail area — all zones where persistent moisture and road contamination accelerate wear. On daily-ridden machines or bikes used in wet conditions, fitting a quality rear tyre hugger like this one can meaningfully extend the service life of rear suspension bearings and keep the undertail looking presentable far longer.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe extension mounts over the motorcycle's existing rear fender and is secured with the screws included in the kit. Installation requires drilling holes in the original fender — a straightforward process that Puig supports with a dedicated downloadable instruction document containing step-by-step tips. No specialist tools or professional fitting are required for a competent home installation.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear fender extension is designed and tested to fit the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki Z500 (2024–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki Z500 SE (2024–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e376 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367762321674,"sku":"1811J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_0_27301577-7195-49c1-a2ad-abaaca7e6795.png?v=1784113435"},{"product_id":"puig-rear-fender-extension-kawasaki-z400-2019-2024","title":"Puig Rear Fender Extension for Kawasaki Z400 (2019–2024)","description":"\u003cp\u003ePuig has built its reputation on purposeful design that complements a motorcycle's original lines rather than compromising them. This rear fender extension for the Kawasaki Z400 continues that tradition: sculpted in durable ABS and finished in a paint-matched matte black, it slots seamlessly over the factory mudguard to deliver genuine chain splash and road-grime protection without altering the Z400's sharp streetfighter aesthetic.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMatte black painted finish integrates cleanly with the Z400's original bodywork for a factory-consistent look\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS (acrylonitrile butadiene styrene) — resistant to stone chips, chain spray and flex loading\u003c\/li\u003e\n\u003cli\u003eExtends the coverage of the original rear mudguard, acting as an effective tyre hugger that keeps chain lube and road debris away from swingarm bearings and bodywork\u003c\/li\u003e\n\u003cli\u003eMounting hardware supplied by Puig — everything needed for fitment is included in the box\u003c\/li\u003e\n\u003cli\u003eInstalls directly over the stock fender; straightforward fitment with minimal modification required\u003c\/li\u003e\n\u003cli\u003ePuig provides a downloadable assembly guide to simplify the drilling and fitting process\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Finish\u003c\/h2\u003e\u003cp\u003eWhere many aftermarket rear splash guards are obvious add-ons, Puig's engineers have shaped this extension to mirror the Z400's own bodywork profile. The matte black paint treatment ties in with the motorcycle's dark trim and avoids the mismatched sheen that can make budget pieces look out of place. At 376 g, the part adds negligible mass while meaningfully extending the rear mudguard's protective reach — a balance that reflects Puig's long-standing approach to accessories that earn their place on the bike.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe extension mounts over the original fender and is secured using the screws supplied by Puig. Fitment does require drilling holes in the original fender, so take care to follow Puig's assembly document — available as a free download directly from Puig — before starting the job. The guide includes positioning tips and torque recommendations that make the process straightforward even for home mechanics.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear fender extension is designed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Z400 (2019–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e376 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367763829002,"sku":"1811J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_0_b715b59d-380d-4dfc-932b-40a9861c2c8f.png?v=1784113435"},{"product_id":"puig-rear-fender-extension-kawasaki-ninja-500-2024-2026","title":"Puig Rear Fender Extension for Kawasaki Ninja 500 (2024–2026)","description":"\u003cp\u003eProtect your Kawasaki Ninja 500's drivetrain, underbelly and rear bodywork from road spray, mud and chain-flung debris with this purpose-designed rear fender extension from Puig. Moulded in impact-resistant ABS and finished in matte black, it integrates cleanly over the factory mudguard without altering the Ninja 500's aggressive silhouette.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured from acrylonitrile butadiene styrene (ABS) — a thermoplastic renowned for its exceptional impact resistance and dimensional stability under road conditions.\u003c\/li\u003e\n\u003cli\u003eMatte black painted finish closely matches OEM plastics, preserving the visual continuity of the Ninja 500's bodywork.\u003c\/li\u003e\n\u003cli\u003eMounts directly over the original rear mudguard, extending coverage to reduce rear-wheel spray reaching the swingarm, shock absorber and chain.\u003c\/li\u003e\n\u003cli\u003eMounting hardware supplied by Puig — no need to source additional fixings.\u003c\/li\u003e\n\u003cli\u003ePuig provides a dedicated installation guide available for download, with step-by-step tips to simplify the fitting process.\u003c\/li\u003e\n\u003cli\u003eWeighing only 376 g, this rear hugger adds meaningful protection with virtually no impact on handling or unsprung weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Design\u003c\/h2\u003e\u003cp\u003ePuig has engineered this rear fender extension to complement rather than dominate. The ABS shell is moulded to follow the contour of the Ninja 500's factory mudguard, so the finished result looks factory-fitted rather than aftermarket. The matte black paint is applied to resist UV degradation and minor abrasion, keeping the extension looking presentable even after hard road miles.\u003c\/p\u003e\u003ch2\u003eRoad Performance and Protection\u003c\/h2\u003e\u003cp\u003eThe primary purpose of a rear tyre hugger extension is straightforward: intercept the arc of water, grit and chain lubricant that a spinning rear tyre throws rearward and downward. On the Ninja 500, the standard rear mudguard leaves the swingarm pivot area and lower shock absorber exposed. This anti-splash guard closes that gap, reducing the rate at which road contamination builds up on mechanical components — extending service intervals and keeping the rear end presentable. It functions equally well as a chain splash guard on greasy commutes and as a mud flap on wet B-roads.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eThe rear splash guard mounts over the motorcycle's existing rear mudguard and is secured with the screws included by Puig. Installation requires drilling holes in the original fender to accept the fixings — this is a straightforward process, and Puig's downloadable assembly guide provides clear tips to ensure accurate hole placement and a rattle-free fit.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eKawasaki Ninja 500 (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e376 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367768154378,"sku":"1811J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_0_c73edfcd-94d7-47af-b058-bacc89424633.png?v=1784113436"},{"product_id":"puig-rear-fender-extension-kawasaki-ninja-400-2018-2024","title":"Puig Rear Fender Extension for Kawasaki Ninja 400 (2018–2024)","description":"\u003cp\u003eWhen chain lube, grit and road spray are eating into your Ninja 400's swingarm and undertail at every track session or wet commute, the stock mudguard simply isn't enough. Puig's rear fender extension clamps directly over the original fender to deliver serious added splash protection, finished in matte black ABS that blends with the Ninja's factory bodywork without a millimetre of visual bulk.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrack-proven ABS construction — acrylonitrile butadiene styrene absorbs impacts from stones, debris and kerb strikes that would crack lesser plastics at pace\u003c\/li\u003e\n\u003cli\u003eGenuine rear tyre hugger coverage extends the OEM mudguard rearward, shielding the swingarm, chain, shock and undertail from chain splash and road spray\u003c\/li\u003e\n\u003cli\u003eMatte black factory-matched finish preserves the Ninja 400's clean aesthetic on and off the circuit\u003c\/li\u003e\n\u003cli\u003ePurpose-engineered bracket geometry mounts flush over the original rear mudguard for a zero-gap fit\u003c\/li\u003e\n\u003cli\u003eSupplied with all fixing screws by Puig — no hunting for hardware before your next track day\u003c\/li\u003e\n\u003cli\u003eLightweight at just 376 g, adding meaningful protection without measurable handling penalty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track and Road\u003c\/h2\u003e\u003cp\u003eThe Kawasaki Ninja 400 is as at home on a track day as it is on a Sunday morning B-road blast, and Puig has engineered this rear fender extension with both environments in mind. At circuit speeds, the undertail fender acts as an anti-splash guard, keeping abrasive grit away from the chain, rear shock and suspension linkages where wear accumulates fastest. On wet roads, it functions as a comprehensive rear splash guard, preventing the chain oil and tyre water spray that accelerates corrosion on exposed swingarm components. The matte ABS surface is UV-stable and resistant to chain lubricant, brake fluid splash and cleaning chemicals — meaning it stays looking sharp through a full season without fading or cracking.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe rear mudguard extension fits directly over the Ninja 400's original rear mudguard and is secured using the screws Puig includes in the box. Installation requires drilling holes in the original fender — a straightforward task, and Puig provides a dedicated assembly guide available to download from their official website, with step-by-step tips to make the process quick and accurate. No specialist tools beyond a drill are needed.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eKawasaki Ninja 400 (2018–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eEnhances protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e376 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367775363338,"sku":"1811J","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_0_7380557d-7f3f-4e2c-b16e-853c6ef41504.png?v=1784113436"},{"product_id":"puig-beak-extender-yamaha-tenere-700-2019-2024","title":"Puig Beak Extender for Yamaha Tenere 700 (2019–2024)","description":"\u003cp\u003eEngineered from impact-resistant ABS in a satin matte black finish, the Puig beak extender for the Yamaha Tenere 700 delivers genuine front-end protection without a single drill hole required. Tested to withstand the rigours of trail riding and adventure touring alike, this front beak extension is the clean, confident upgrade that keeps your Tenere's nose fairing looking factory-fresh for longer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured from acrylonitrile butadiene styrene (ABS) — a thermoplastic renowned for its high impact resistance, dimensional stability and long-term durability in adverse weather conditions.\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates seamlessly with the Tenere 700's adventure styling, complementing the standard beak profile without overpowering the original design language.\u003c\/li\u003e\n\u003cli\u003eNo drilling required — the extender mounts directly to the existing front mudguard using the OEM fixing points, preserving the integrity of your fairing and keeping the fitment fully reversible.\u003c\/li\u003e\n\u003cli\u003eShields the front of the motorcycle from stone chips, trail debris and mud throw-up, reducing wear on the lower fairing and front wheel area.\u003c\/li\u003e\n\u003cli\u003eLightweight at just 690 g, adding meaningful protection without measurable impact on handling or weight distribution.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured by Puig, a Spanish accessory specialist with decades of development experience in adventure and sport-touring add-on parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Design\u003c\/h2\u003e\u003cp\u003ePuig's beak extender is produced using high-grade ABS, the same class of engineering plastic used across OEM fairing components throughout the motorcycle industry. ABS combines toughness under sudden impact with enough flex to absorb trail vibration rather than crack or distort. The matte black surface treatment resists UV degradation and minor abrasions, ensuring the adventure mudguard extension retains its appearance across seasons of heavy use.\u003c\/p\u003e\u003cp\u003eThe geometry of the front beak has been developed specifically for the Tenere 700's proportions, so the nose extension flows naturally from the standard front mudguard rather than appearing as a bolt-on afterthought. Whether the bike is used on tarmac adventure routes or light off-road tracks, the Puig beak provides a coherent, purposeful look.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eOne of the most practical aspects of this front beak extension is its drill-free installation. All mounting points correspond directly to existing hardware on the Yamaha Tenere 700's front fender, meaning the extender can be fitted and — if required — removed without leaving any permanent marks on the original components. This makes it equally suitable for riders who want long-term protection and those fitting accessories to a bike that may be returned to standard specification at a later date.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig beak extender is designed and confirmed to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha Tenere 700 (2019–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e690 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367777427722,"sku":"3806J","price":141.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_17_c1f729bd-0ce6-44a5-a267-6e5c77655917.png?v=1784116342"},{"product_id":"puig-beak-extender-yamaha-tenere-700-rally-edition-2021-2024","title":"Puig Beak Extender for Yamaha Tenere 700 Rally Edition (2021–2024)","description":"\u003cp\u003eEngineered specifically for the Yamaha Tenere 700 Rally Edition, this Puig beak extender delivers genuine front-end protection without a single drill hole. Moulded from impact-resistant ABS in a purposeful matte black finish, it extends the adventure mudguard profile to shield the fork legs, radiator and lower fairing from stones, mud and debris on both road and track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — one of the most durable materials available for nose extension components, offering excellent resistance to stone strikes and flex under load\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates seamlessly with the Tenere 700 Rally Edition's aggressive adventure styling\u003c\/li\u003e\n\u003cli\u003eNo drilling required — the front beak extension mounts directly to the existing front mudguard fixings for a clean, reversible installation\u003c\/li\u003e\n\u003cli\u003ePrecisely tailored fitment for the 2021–2024 Yamaha Tenere 700 Rally Edition ensures correct geometry and gap-free alignment\u003c\/li\u003e\n\u003cli\u003eLightweight at 690 g, adding meaningful front protection without compromising handling balance\u003c\/li\u003e\n\u003cli\u003eDesigned for both on-road touring and off-road adventure riding where front-end debris deflection matters most\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Design\u003c\/h2\u003e\u003cp\u003ePuig has applied the same engineering discipline to this adventure beak as it does to its race-circuit bodywork. The ABS construction is injection-moulded to tight tolerances, meaning the beak extender follows the contour of the Tenere 700 Rally Edition's nose fairing without unsightly gaps or misaligned edges. The matte black surface resists UV fading and minor scuffs better than gloss finishes, keeping the front of the motorcycle looking purposeful long after the trails take their toll.\u003c\/p\u003e\u003ch2\u003eOn the Road \u0026amp; Off It\u003c\/h2\u003e\u003cp\u003eThe extended front nose fairing profile works in two ways: it adds a visual presence that matches the rally-raid character of the Tenere 700 Rally Edition, and it physically redirects airflow and debris away from the fork lowers and crash-sensitive components. Whether you are crossing a gravel forest road or commuting in wet weather, the GS-style beak extension provides a meaningful upgrade over the standard mudguard coverage. Fitting takes minutes with basic hand tools and leaves no permanent marks on the original bodywork.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig front beak extender is designed exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha Tenere 700 Rally Edition (2021–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not compatible with the standard Tenere 700 or World Raid variants. Always verify your model designation and year before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e690 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367782899978,"sku":"3806J","price":141.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_17_540d18b7-46f4-4463-a129-f7f26c2fe338.png?v=1784116341"},{"product_id":"puig-beak-extender-yamaha-tenere-700-extreme-edition-2023-2025","title":"Puig Beak Extender for Yamaha Tenere 700 Extreme Edition (2023–2025)","description":"\u003cp\u003eDesigned to complement the Tenere 700 Extreme Edition's rugged adventure aesthetic, Puig's beak extender brings a purposeful nose extension to the front mudguard — finished in a matte black ABS that sits flush with the bike's factory bodywork and holds its look across the toughest terrain.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInjection-moulded from acrylonitrile butadiene styrene (ABS) — a material chosen for its exceptional impact resistance and dimensional stability in all weathers.\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates seamlessly with the Tenere 700 Extreme Edition's original fairing, giving the front nose fairing extension a factory-fitted appearance.\u003c\/li\u003e\n\u003cli\u003eExtends the front beak to provide increased debris deflection and improved mud clearance on the trail.\u003c\/li\u003e\n\u003cli\u003eNo drilling required for fitment — attaches directly to the existing front mudguard mounting points for a clean, reversible installation.\u003c\/li\u003e\n\u003cli\u003eLightweight at 690 g, adding meaningful front-end protection without compromising handling or weight distribution.\u003c\/li\u003e\n\u003cli\u003eA direct Puig design developed specifically for the Extreme Edition variant, reflecting the brand's long heritage in precision-engineered motorcycle accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been crafting precision motorcycle accessories since 1964, and this adventure beak extender reflects that pedigree. The matte black ABS surface does more than resist stone chips and flex under impact — it carries a considered aesthetic continuity with the Tenere 700 Extreme Edition's own matte and dark-tone bodywork. Where cheaper aftermarket alternatives can look bolt-on and incongruous, Puig's GS beak-style geometry echoes the proportions of the original front nose fairing, so the extension reads as part of the motorcycle rather than an afterthought. The surface texture is consistent with the factory mudguard, ensuring the overall front-end silhouette remains cohesive whether the bike is parked in a showroom or caked in trail dust.\u003c\/p\u003e\u003ch2\u003eOn the Road and the Trail\u003c\/h2\u003e\u003cp\u003eFitting a front beak extension to an adventure bike is one of the simplest and most effective functional upgrades available. The extended nose profile channels air and debris away from the front of the engine and lower fairing at speed, while the additional mudguard coverage keeps roost off the forks and wheel spindle area on loose surfaces. Because the Puig extender requires no drilling and uses the Tenere's existing mounting hardware, it can be removed and refitted in minutes — useful if you are preparing the bike for track days, photography, or shipping.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis beak extender is designed and tested exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha Tenere 700 Extreme Edition (2023–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not compatible with standard Tenere 700 or World Raid variants. Confirm your model year and edition before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e690 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367786078474,"sku":"3806J","price":141.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_17_9bcfb888-b1fd-4d52-a9b0-8b6af9855ef3.png?v=1784116341"},{"product_id":"puig-beak-extender-yamaha-tenere-700-explore-edition-2023-2025","title":"Puig Beak Extender for Yamaha Tenere 700 Explore Edition (2023–2025)","description":"\u003cp\u003ePurpose-built for the Yamaha Tenere 700 Explore Edition, this Puig beak extender delivers genuine adventure mudguard protection without complicating your daily ride. Moulded from impact-resistant ABS in a matte black finish, it bolts straight onto the front nose fairing with no drilling required — keeping the installation clean, reversible, and well within reach of any home mechanic.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNo drilling needed for fitment — attaches directly to the existing front fender, preserving the bike's standard structure\u003c\/li\u003e\n\u003cli\u003eMoulded from acrylonitrile butadiene styrene (ABS), a material chosen specifically for its resilience against stone chips, mud, and trail debris\u003c\/li\u003e\n\u003cli\u003eExtends the front beak to redirect spray and road grime away from the engine bay and lower fairing\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates naturally with the Tenere 700 Explore Edition's adventure styling\u003c\/li\u003e\n\u003cli\u003eLightweight at 690 g, adding meaningful protection without noticeable impact on handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eCommuting on mixed roads or covering long-distance touring stages, the Puig front beak extension earns its place every time conditions turn wet or loose. The adventure beak geometry channels water and grit away from critical components, reducing cleaning time and long-term wear on seals and hoses beneath the headlight nacelle. Because no specialist tools or permanent modifications are involved, fitting and removal are straightforward — useful for riders who swap parts seasonally or share components between bikes.\u003c\/p\u003e\u003cp\u003eThe matte black ABS construction is a practical choice beyond aesthetics. ABS absorbs minor impacts that would crack a thinner or more brittle material, and the surface resists UV degradation better than untreated plastics, so the nose extension holds its colour across multiple seasons of use. At this price point and weight, it represents one of the most cost-effective upgrades available for the Tenere 700 Explore Edition.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig beak extender is designed and tested to fit the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha Tenere 700 Explore Edition (2023–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways confirm your model year and variant before ordering. The front nose fairing extension mounts using existing fixing points only — no modifications to the front fender or mudguard are required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e690 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367791812874,"sku":"3806J","price":141.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_17_408bce0e-17f7-48de-9371-e8bf43f49a7c.png?v=1784116342"},{"product_id":"puig-beak-extender-yamaha-tracer-9-2021-2024","title":"Puig Beak Extender for Yamaha Tracer 9 (2021–2024)","description":"\u003cp\u003eThe Puig beak extender for the Yamaha Tracer 9 transforms the front end with a purposeful adventure aesthetic, extending the nose fairing in a clean matte black finish that looks factory-fitted from day one. Moulded from high-impact ABS, this front beak extension brings both visual drama and genuine mudguard protection to the Tracer 9's front end — no drilling, no fuss.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdventure-ready front beak design that gives the Tracer 9 a more imposing, GS-style nose profile straight out of the box.\u003c\/li\u003e\n\u003cli\u003eMatte black ABS construction absorbs road debris and minor impacts without cracking or discolouring over time.\u003c\/li\u003e\n\u003cli\u003eNo drilling required — installs directly onto the existing front mudguard using OEM mounting points for a clean, reversible fitment.\u003c\/li\u003e\n\u003cli\u003eLightweight at just 60 g, so the beak extension adds character without adding unnecessary mass.\u003c\/li\u003e\n\u003cli\u003eSeamless finish and proportional form ensure the adventure mudguard extension looks integrated rather than afterthought.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been shaping motorcycle aerodynamics and styling since 1964, and every detail of this front beak extender reflects that decades-long understanding of form following function. The matte black surface is deliberately chosen to complement the Tracer 9's bodywork tones and provide a UV-stable, scratch-forgiving finish that ages gracefully through road seasons. Where gloss finishes can highlight every stone chip, the matte surface keeps the nose extension looking purposeful rather than worn.\u003c\/p\u003e\u003cp\u003eThe sculpted profile echoes the adventure-tourer language of the broader segment — a nod to the GS beak aesthetic — while remaining proportional to the Tracer 9's silhouette. The result is a front nose fairing extension that earns its place on both touring days and weekend blasts.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003ePuig has engineered this beak extender for a tool-minimal, drill-free installation. It locates onto the factory front mudguard without any modification to the OEM plastics, making it equally easy to fit on a new bike or remove for resale. The ABS material is pre-finished; no painting or priming is needed.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha Tracer 9 (2021–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e-60 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367796564234,"sku":"3837J","price":145.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_6_36955aed-447e-47e2-afa6-b7b549bf6b46.png?v=1784116347"},{"product_id":"puig-beak-extender-yamaha-tracer-9-gt-2021-2024","title":"Puig Beak Extender for Yamaha Tracer 9 GT (2021–2024)","description":"\u003cp\u003ePuig's beak extender for the Yamaha Tracer 9 GT brings a purposeful adventure aesthetic to a motorcycle that already thrives on versatility. Moulded from impact-resistant ABS in a clean matte black finish, this front beak extension complements the Tracer 9 GT's lines while delivering genuine protection for the front mudguard area — no drilling, no fuss.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdventure-touring beak design integrates cleanly with the Tracer 9 GT's front nose fairing for a cohesive, purposeful look\u003c\/li\u003e\n\u003cli\u003eMatte black ABS construction offers strong resistance to trail debris, stone chips and everyday road impacts\u003c\/li\u003e\n\u003cli\u003eDrill-free fitment — attaches directly to the existing front mudguard without modifying the bodywork\u003c\/li\u003e\n\u003cli\u003eLightweight at approximately 60 g, adding negligible mass while enhancing protection\u003c\/li\u003e\n\u003cli\u003eExact OEM-style colour match in matte black suits both stock and lightly modified Tracer 9 GT builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been crafting precision motorcycle accessories in Barcelona since 1964, and that heritage shows in details like this beak extender. The matte black finish is not a secondary coat applied over gloss — it is integral to the ABS moulding, ensuring the surface ages gracefully without peeling or fading. The profile has been designed specifically for the Tracer 9 GT generation, meaning the curvature and mounting geometry mirror Yamaha's own design language rather than relying on a universal fit.\u003c\/p\u003e\u003cp\u003eFor riders who admire the commanding road presence of purpose-built adventure tourers, this front beak extension delivers exactly that character. The nose extension elongates the frontal silhouette, giving the Tracer 9 GT a more planted, exploration-ready stance that suits long-distance touring as naturally as it suits a spirited mountain pass.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eNo drilling is required. The extender locates directly onto the factory front mudguard using existing attachment points, keeping the installation reversible and the resale value of your motorcycle intact. The process is straightforward enough to complete in minutes with basic workshop tools.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha Tracer 9 GT (2021–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured from acrylonitrile butadiene styrene (ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e-60 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Matt black","offer_id":53367797678346,"sku":"3837J","price":145.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cut_6_d973e6ce-e157-4864-af60-0d66e3582a54.png?v=1784116346"},{"product_id":"puig-front-fender-extension-bmw-f900gs-2024-2026","title":"Puig Front Fender Extension for BMW F900GS (2024–2026)","description":"\u003cp\u003eKeep the road grime, mud and flying debris off your engine and away from your riding gear with the Puig front fender extension, purpose-built for the BMW F900GS (2024–2026). This front mudguard extension bolts straight onto your bike's original fender, giving you an extra layer of front tyre hugger protection exactly where you need it most.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine fender extender designed specifically for BMW F900GS (2024–2026)\u003c\/li\u003e\n\u003cli\u003eImproves protection over the original front fender, reducing road debris protection gaps\u003c\/li\u003e\n\u003cli\u003eMoulded from durable, impact-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the OEM fender\u003c\/li\u003e\n\u003cli\u003eLightweight at just 86 g — no noticeable impact on handling\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the factory look of your F900GS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Real-World Protection\u003c\/h2\u003e\u003cp\u003eEvery ride throws up stones, mud and water spray from the front wheel. This mudguard extension acts as an effective anti-splash guard, shielding the engine, radiator and lower bodywork from the worst of it. Puig's ABS construction is chosen specifically for its resistance to impact, so this extension holds up to the daily abuse of gravel tracks, wet roads and adventure-style riding without cracking or fading.\u003c\/p\u003e\u003ch3\u003eSimple, Secure Installation\u003c\/h3\u003e\u003cp\u003eThe extension is supplied with plastic rivets, designed for a permanent attachment directly onto your F900GS's original front fender. Puig includes fitting tips with the part to make assembly straightforward, so you can get the added splash guard fender extender in place with minimal fuss.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW F900GS (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLabel\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufactured in ABS plastic. Supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368647352586,"sku":"1942N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1942N.png?v=1787730512"},{"product_id":"puig-front-fender-extension-bmw-f900gs-adventure-2024-2026","title":"Puig Front Fender Extension for BMW F900GS Adventure (2024–2026)","description":"\u003cp\u003eWhen you're pushing your F900GS Adventure hard over loose gravel and rutted trails, the last thing you need is spray and stones hammering into your radiator, engine cases or visor. This Puig front fender extension bolts straight onto your OEM mudguard to extend its coverage, giving you serious extra front tyre hugger protection exactly where off-road and track-style riding punishes your bike hardest.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends front mudguard coverage for stronger road debris protection at speed\u003c\/li\u003e\n\u003cli\u003eDoubles as engine splash protection and radiator protection on wet or gravel terrain\u003c\/li\u003e\n\u003cli\u003eMoulded in impact-resistant ABS plastic - built to survive stone strikes, not just splashes\u003c\/li\u003e\n\u003cli\u003eBlack finish blends cleanly with the F900GS Adventure's factory styling\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original fender\u003c\/li\u003e\n\u003cli\u003eDirect fitment, purpose-designed for this model - no cutting or trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for hard riding, not just showroom looks\u003c\/h3\u003e\u003cp\u003ePuig developed this extension specifically for riders who use their F900GS Adventure the way it was designed to be used - fast, loaded and off the beaten track. The extra length on the fender line acts as an anti-splash guard, keeping mud, grit and stones from being flung up into the front of the engine, the radiator and the rider. It's a small part that does a genuinely useful job when you're covering serious mileage on rough surfaces.\u003c\/p\u003e\u003ch3\u003eSimple, permanent installation\u003c\/h3\u003e\u003cp\u003eThe extension mounts directly onto the existing OEM mudguard using the supplied plastic rivets, so there's no drilling and no permanent modification to the bike itself. Puig also includes fitting tips to help you get the extension positioned and secured correctly first time.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the BMW F900GS Adventure (2024–2026). Reference: puigref-1942.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunctional: It improves the protection of the original fender\u003c\/li\u003e\n\u003cli\u003eMaterial: Manufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/li\u003e\n\u003cli\u003eWeight: 86 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368648270090,"sku":"1942N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1942N_c9f66c14-8e90-4c77-8cb6-deb0d722d282.png?v=1787730515"},{"product_id":"puig-front-fender-extension-bmw-f850gs-2018-2023","title":"Puig Front Fender Extension for BMW F850GS (2018–2023)","description":"\u003cp\u003eKeep road grime, mud and stone chips off your F850GS with this Puig front fender extension, purpose-moulded in black ABS to sit flush against the OEM mudguard as if it were designed there from the factory. It's a small addition with a big job: extending the reach of your front mudguard extension so spray and debris get deflected before they reach the radiator, engine and your boots.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends front tyre hugger coverage to reduce road debris protection gaps\u003c\/li\u003e\n\u003cli\u003eMoulded in durable, impact-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the F850GS's factory bodywork\u003c\/li\u003e\n\u003cli\u003eDoubles as extra engine splash protection and radiator protection in wet or muddy conditions\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original fender\u003c\/li\u003e\n\u003cli\u003eStraightforward installation with Puig's fitting guidance included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for Real-World Riding\u003c\/h3\u003e\u003cp\u003eWhether you're commuting through wet city streets or tackling gravel tracks on your F850GS, this front fender extension acts as an effective anti-splash guard, cutting down the mess and mechanical grime thrown up onto the frame, engine and rider. The ABS construction is tough enough to shrug off stone impacts without adding meaningful weight.\u003c\/p\u003e\u003ch3\u003eClean Factory-Look Fitment\u003c\/h3\u003e\u003cp\u003ePuig designs this extension specifically for the F850GS's original mudguard shape, so it mounts using the supplied plastic rivets without any drilling drama or awkward gaps. The black finish matches the bike's factory styling, keeping the look understated rather than bolted-on.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW F850GS (2018–2023)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLabel\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368648630538,"sku":"1942N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1942N_3730932d-1729-442c-9ac2-463a4304965e.png?v=1787730520"},{"product_id":"puig-front-fender-extension-bmw-f850gs-adventure-2019-2023","title":"Puig Front Fender Extension for BMW F850GS Adventure (2019–2023)","description":"\u003cp\u003eKeep your F850GS Adventure cleaner and better protected on every ride with this Puig front fender extension. It's a simple, everyday upgrade that extends the coverage of your original front mudguard, cutting down on the mud, stones and road debris that spray up onto the engine, radiator and rider on wet roads or gravel tracks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the original front fender for improved front tyre hugger coverage\u003c\/li\u003e\n\u003cli\u003eReduces road debris, mud and water spray onto the engine and radiator\u003c\/li\u003e\n\u003cli\u003eMade from durable, impact-resistant ABS plastic\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a permanent, secure fit to the OEM fender\u003c\/li\u003e\n\u003cli\u003eLightweight at just 86 g, with no noticeable effect on handling\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the F850GS Adventure's factory look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEveryday Value, Real Protection\u003c\/h3\u003e\u003cp\u003eThis isn't a track-day extra — it's the kind of practical accessory that earns its keep on daily rides, commutes and green-laning alike. By adding this front mudguard extension, you're giving your bike's front end genuine anti-splash guard performance without changing its appearance or adding noticeable weight.\u003c\/p\u003e\u003ch3\u003eStraightforward Fitting\u003c\/h3\u003e\u003cp\u003eThe extension mounts directly onto your bike's original front fender using the supplied plastic rivets, giving a secure, lasting fit. Puig includes fitting tips to make the installation quick and hassle-free, so you can get this splash and debris protection in place without a trip to the workshop.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the BMW F850GS Adventure (2019–2023).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368649974026,"sku":"1942N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/1942N_33842424-c48c-474e-b880-d92e6b9aba0f.png?v=1787730524"},{"product_id":"puig-front-mudguard-extension-benelli-leoncino-500-trail-2016-2025","title":"Puig Front Mudguard Extension for Benelli Leoncino 500 Trail (2016–2025)","description":"\u003cp\u003eProtect your Benelli Leoncino 500 Trail from road debris, standing water and engine contamination with this purpose-made front mudguard extension from Puig. Engineered for the Leoncino 500 Trail from 2016 through 2025, this lightweight ABS extension bolts directly onto the original mudguard using the supplied plastic rivets, delivering a permanent, rattle-free fitment that keeps grime away from critical components on every road or trail outing.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the reach of the stock front mudguard to improve protection against road debris, mud and spray thrown up by the front tyre\u003c\/li\u003e\n\u003cli\u003eShields the engine, radiator and frame from front-wheel splash — reducing wear and maintenance intervals on sensitive components\u003c\/li\u003e\n\u003cli\u003eMoulded in high-impact ABS plastic for excellent resistance to stone strikes, flex and UV degradation\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the original mudguard — no drilling or fabrication required\u003c\/li\u003e\n\u003cli\u003eWeighs just 66 g, so there is no meaningful addition to unsprung weight\u003c\/li\u003e\n\u003cli\u003eFinished in black to integrate cleanly with the Leoncino 500 Trail's existing bodywork\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Trail\u003c\/h2\u003e\u003cp\u003eThe Leoncino 500 Trail is built to handle mixed terrain, and that means the front wheel picks up considerably more debris, mud and water than a pure road machine. Puig's front fender extender addresses exactly this scenario: by lengthening the effective coverage area of the factory mudguard, it acts as a front splash guard that diverts contamination well clear of the radiator, engine casings and the rider's boots. The result is a cleaner motorcycle, a better-protected drivetrain and a more confident riding experience in wet or loose conditions.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003ePuig supplies plastic rivets with the extension to ensure a permanent, vibration-resistant fixing to the OEM fender. Alongside the part itself, Puig includes fitting tips to guide correct placement on your specific motorcycle, making the installation straightforward even without workshop experience.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extension is specifically designed and tested for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBenelli Leoncino 500 Trail (2016–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufactured in ABS plastic. Supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368651383050,"sku":"3516N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3516N2.png?v=1787730529"},{"product_id":"puig-front-mudguard-extension-benelli-leoncino-500-2016-2026","title":"Puig Front Mudguard Extension for Benelli Leoncino 500 (2016–2026)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, this Puig front mudguard extension is built to outlast road grime, stone chips and the constant punishment of real-world riding. Designed specifically for the Benelli Leoncino 500, it bolts directly to the original fender using the supplied plastic rivets, delivering a permanent, rattle-free fit that looks factory-fitted from day one.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-impact ABS construction resists stone strikes, flex fatigue and UV degradation — a material chosen for durability, not cost-cutting\u003c\/li\u003e\n\u003cli\u003eSignificantly extends the coverage of the original front mudguard, shielding the engine bay, radiator and lower frame from road debris and standing water\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the OEM fender — no drilling, no improvising\u003c\/li\u003e\n\u003cli\u003eDesigned as a model-specific fit for the Benelli Leoncino 500, ensuring correct geometry and clearance across the full 2016–2026 model range\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates seamlessly with the Leoncino's standard bodywork for a clean, unobtrusive appearance\u003c\/li\u003e\n\u003cli\u003ePuig includes fitment tips in the box to guide installation and ensure correct placement first time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig's choice of ABS plastic for this front fender extension is deliberate. The material combines a high resistance to impact with low weight — the extension tips the scales at just 66 g — making it an efficient addition that adds genuine protection without burdening the front end. The moulding tolerances are tight enough that the riveted attachment sits flush against the OEM mudguard without gaps or misalignment, a detail that separates a quality aftermarket part from a budget alternative. The black finish is moulded through the material rather than painted on, keeping its appearance intact even as grit and debris do their worst.\u003c\/p\u003e\u003ch2\u003eRoad Performance and Protection\u003c\/h2\u003e\u003cp\u003eAt speed, water, mud and road debris thrown up by the front tyre travel a surprisingly long arc before striking the engine, radiator and lower fairing panels. The original Leoncino mudguard offers a reasonable starting point, but its coverage leaves the radiator and engine casings exposed during wet riding or on loose surfaces. This Puig front splash guard intercepts that debris stream, acting as a front tyre hugger extension that keeps the drivetrain cleaner and reduces the risk of stone chips reaching the radiator core or hitting the rider's lower legs. For commuters and touring riders who cover miles in all weathers, the benefit is tangible from the first damp ride.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis mudguard extension is engineered exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBenelli Leoncino 500 (2016–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation uses the supplied plastic rivets to mount the extension onto the factory front mudguard. Puig also includes assembly guidance notes to simplify the fitting process. No specialist tools are required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368654364938,"sku":"3516N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3516N2_fdefe284-b385-437a-8866-2bdae8ed322c.png?v=1787730534"},{"product_id":"puig-front-mudguard-extension-kawasaki-z300-2015-2017","title":"Puig Front Mudguard Extension for Kawasaki Z300 (2015–2017)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, the Puig front mudguard extension for the Kawasaki Z300 (2015–2017) is a precision-fit upgrade that meaningfully extends the protection of your factory front fender — shielding the engine, radiator and lower bodywork from road debris, grime and spray that the stock mudguard simply cannot intercept.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufactured in high-grade ABS plastic, offering excellent resistance to impacts, UV exposure and the mechanical stress of daily road use.\u003c\/li\u003e\n\u003cli\u003eExtends and improves the coverage of the original front fender, providing superior road debris protection and acting as an effective front splash guard.\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment directly to the OEM mudguard — no drilling or specialist tools required.\u003c\/li\u003e\n\u003cli\u003eAssembly tips included in the box to simplify fitment and ensure correct positioning on the Z300.\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates naturally with the Kawasaki Z300's stock bodywork and complements aftermarket colour schemes alike.\u003c\/li\u003e\n\u003cli\u003eLightweight at just 70 g — adds meaningful protection without any appreciable gain in unsprung mass.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig has long been regarded as one of the most exacting manufacturers of motorcycle add-on parts in Europe, and this front fender extender reflects that reputation. The ABS construction is not an afterthought — ABS plastic is chosen specifically for its toughness under repeated stone strike, its dimensional stability across a wide temperature range and its resistance to the road chemicals and cleaning products a motorcycle encounters throughout its service life. The wall section is consistent throughout, and the moulded finish is clean and precise, sitting flush against the OEM mudguard line rather than looking like a bolt-on afterthought.\u003c\/p\u003e\u003ch2\u003eRoad and Everyday Use\u003c\/h2\u003e\u003cp\u003eAt motorway speeds and in wet conditions, an unprotected lower engine bay and radiator face a constant barrage of stones, grit and spray thrown up by the front tyre. This front tyre hugger-style extension acts as an anti-splash guard that catches that debris early, before it reaches the radiator fins, brake components or lower fairing panels. For Z300 riders who commute, tour or simply want to keep maintenance costs down by protecting vulnerable components, this is one of the most cost-effective front mudguard upgrades available. The 70 g weight penalty is negligible, and the fitment process — using the supplied rivets and placement guides — takes minutes rather than hours.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig front fender extension is designed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Z300 (2015–2017)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt mounts directly to the original OEM mudguard using the supplied plastic rivets, requiring no modification to the fender or frame. Puig produces dedicated front mudguard extensions for a wide range of naked, sport and touring models — always ensure you select the correct reference for your specific model and year.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e70 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368656265482,"sku":"3517N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3517N2.png?v=1787730539"},{"product_id":"puig-front-mudguard-extension-kawasaki-ninja-300-2015-2017","title":"Puig Front Mudguard Extension for Kawasaki Ninja 300 (2015–2017)","description":"\u003cp\u003eKeep your Kawasaki Ninja 300 cleaner and better protected on every commute or weekend run with this front mudguard extension from Puig. Moulded in tough ABS plastic and finished in black, it bolts directly to your original fender using the supplied plastic rivets — no special tools, no permanent modifications, just genuine everyday splash and debris protection that makes a real difference on wet roads.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the reach of the original front fender to intercept road spray, mud and debris before it reaches the engine, radiator and lower fairing\u003c\/li\u003e\n\u003cli\u003eFormed from high-impact ABS plastic — lightweight at just 70 g yet resistant to stone strikes and UV exposure\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates neatly with the Ninja 300's factory bodywork without looking like an afterthought\u003c\/li\u003e\n\u003cli\u003eAttaches to the OEM fender with the included plastic rivets for a secure, rattle-free fit\u003c\/li\u003e\n\u003cli\u003ePuig supplies fitting tips alongside the part to make installation as straightforward as possible\u003c\/li\u003e\n\u003cli\u003eA cost-effective upgrade that adds genuine protection without requiring bodywork removal or professional fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePractical Protection for Daily Riders\u003c\/h2\u003e\u003cp\u003eThe stock front mudguard on the Ninja 300 does an adequate job in dry conditions, but the moment roads turn wet it leaves the lower engine casings, radiator and front brake components exposed to grime and standing water. Puig's front fender extender closes that gap. Its sculpted ABS profile channels spray downward and away from critical components, reducing the build-up of road contamination that accelerates corrosion and wear — particularly relevant if you use your Ninja 300 year-round.\u003c\/p\u003e\u003cp\u003eInstallation is designed with the home mechanic in mind. The extension locates onto the existing fender using plastic rivets, creating a permanent yet non-destructive attachment. Puig includes practical fitting guidance so you can complete the job confidently without a workshop visit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Ninja 300 (2015–2017)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your model year before ordering. This part is engineered to align with the original OEM fender profile — no trimming or adaptation should be required for the correct fitment years listed above.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e70 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368657281290,"sku":"3517N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3517N2_322532ba-57d0-42d7-bfa5-59a2a03aad5d.png?v=1787730543"},{"product_id":"puig-front-mudguard-extension-kawasaki-z900rs-se-2018-2026","title":"Puig Front Mudguard Extension for Kawasaki Z900RS \/ SE (2018–2026)","description":"\u003cp\u003eRiding the Kawasaki Z900RS or SE day after day demands protection that works as hard as you do. This Puig front fender extension clips directly onto your original mudguard to dramatically extend the coverage area, deflecting road debris, grit and standing water away from the engine, radiator and your riding gear — keeping the bike cleaner and you more comfortable across every kind of road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSignificantly extends the protection offered by the stock front mudguard, acting as an effective front splash guard against tyre spray and road debris\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — tough enough to absorb stone strikes without cracking or distorting over time\u003c\/li\u003e\n\u003cli\u003eFinished in black to integrate cleanly with the Z900RS \/ SE aesthetic without altering the bike's classic silhouette\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the original mudguard — no drilling, no cutting\u003c\/li\u003e\n\u003cli\u003eLightweight at just 86 g, so there is no meaningful addition to unsprung weight\u003c\/li\u003e\n\u003cli\u003ePuig includes fitting guidance to make installation straightforward and accurate first time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Riding Comfort Through Better Protection\u003c\/h2\u003e\u003cp\u003eOn longer rides, a poorly protected front end means constant grit ingress around the engine bay, discolouration of the radiator and — more importantly — spray reaching your lower body every time the road is damp. The Puig front mudguard extension addresses this directly. By extending the coverage zone of the OEM fender downward and forward, it acts as a genuine anti-splash guard and engine splash protection shield, reducing the fatigue that comes from constant cleaning stops or arriving at your destination soaked below the knee.\u003c\/p\u003e\u003cp\u003eThe ABS plastic construction is chosen for its balance of rigidity and resilience. It will not become brittle in cold conditions or warp in summer heat, and its surface resists the minor abrasion of fine road debris that would quickly scuff a softer material.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting is designed to be completed without specialist tools. Puig supplies plastic rivets in the box to mount the extension directly onto the motorcycle's original mudguard, creating a firm and permanent bond. Assembly tips are also included to guide correct positioning before you commit the rivets. Note: reference 9203N is supplied with adhesive rather than rivets for its installation method.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extender is specifically designed and tested to fit the following motorcycles:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Z900RS \/ SE (2018–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368657608970,"sku":"3518N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3518N3.png?v=1787730551"},{"product_id":"puig-front-mudguard-extension-kawasaki-z900rs-cafe-2018-2020","title":"Puig Front Mudguard Extension for Kawasaki Z900RS Cafe (2018–2020)","description":"\u003cp\u003eThe Puig front mudguard extension for the Kawasaki Z900RS Cafe brings a purposeful, factory-matched aesthetic to a machine that wears its heritage proudly. Shaped to follow the lines of the original fender and finished in satin black ABS, this front fender extender feels like a genuine part of the café racer's visual signature rather than an afterthought — while quietly doing the serious job of shielding the engine, radiator and lower fairing from road debris, standing water and grime thrown up by the front tyre.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the coverage of the original front mudguard to deliver meaningful engine splash protection and road debris protection on both road and urban commutes.\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — lightweight at just 86 g yet highly resistant to stone strikes, flex fatigue and UV degradation.\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates cleanly with the Z900RS Cafe's dark bodywork, preserving the retro-modern design language Kawasaki intended.\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the OEM fender — no drilling, no adhesives required on this reference.\u003c\/li\u003e\n\u003cli\u003ePuig provides fitting tips with every unit to streamline installation and ensure correct positioning first time.\u003c\/li\u003e\n\u003cli\u003eModel-specific design engineered exclusively for the Z900RS Cafe, not a universal fitment adapted with spacers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been producing motorcycle accessories for decades, and that experience shows in how this front fender extension is executed. Where generic anti-splash guards rely on broad, blunt coverage, Puig's unit follows the Z900RS Cafe's contours precisely — the result is a front splash guard that looks considered rather than bolted-on. The black ABS surface carries the same tonal gravity as the bike's shrouds and seat cowl, so the extension recedes visually while the machine's café racer silhouette remains uninterrupted.\u003c\/p\u003e\u003cp\u003eFor riders who have invested in a Z900RS Cafe partly for what it represents — a lineage stretching back to the original Z1 — keeping that aesthetic integrity intact matters. This mudguard extension earns its place on the bike by refusing to compromise the look.\u003c\/p\u003e\u003ch2\u003eProtection and Performance\u003c\/h2\u003e\u003cp\u003eThe front tyre hugger and fender extender category exists because the original equipment mudguard on most naked and retro-styled motorcycles is trimmed short for visual lightness, leaving the engine cases, radiator and lower belly panel exposed to everything the road surface throws upward. At motorway speeds that means stone chips, grit and spray — all of which accelerate corrosion and can cause cosmetic or functional damage over time.\u003c\/p\u003e\u003cp\u003ePuig's ABS construction resists the kind of repeated flexing and impact that cracks cheaper aftermarket parts, and the plastic rivet mounting system keeps the extension flush and rattle-free across the full range of fork travel.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed and manufactured specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki Z900RS Cafe (2018–2020)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your exact model year and variant before ordering. For the Kawasaki Z900RS (standard\/naked) or other model years, alternative Puig references apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368658166026,"sku":"3518N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3518N3_d14a9903-3088-4886-bb8f-11d2b998ab0a.png?v=1787730553"},{"product_id":"puig-front-mudguard-extension-ktm-690-duke-2015-2017","title":"Puig Front Mudguard Extension for KTM 690 Duke (2015–2017)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, the Puig front mudguard extension for the KTM 690 Duke (2015–2017) is built to last the life of the motorcycle. It bolts directly to the original mudguard using the supplied plastic rivets, adding a permanent second line of defence against road debris, water spray and engine bay contamination without a single modification to the factory components.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-impact ABS plastic construction resists stone chips, flex and UV degradation across all riding conditions\u003c\/li\u003e\n\u003cli\u003eExtends the reach of the stock mudguard to deflect road debris away from the engine, radiator and lower fairing\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the OEM fender — no drilling or adhesive required\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates naturally with the KTM 690 Duke's original colour scheme\u003c\/li\u003e\n\u003cli\u003eInstallation tips included to guide correct positioning and a flush, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eFeatherlight at just 86 g — zero measurable impact on front-end handling or unsprung weight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig manufacture this front fender extender from a grade of ABS plastic selected specifically for its resistance to high-velocity impacts. Road grit, small stones and standing water are constant threats to the radiator, engine cases and lower bodywork on any naked bike, and the 690 Duke's upright riding position means the front tyre throws debris almost directly rearward. The ABS shell absorbs that punishment without cracking or distorting, and the matte black surface is colour-stable over time — it will not fade, chalk or peel under prolonged UV exposure.\u003c\/p\u003e\u003cp\u003eRiveted attachment rather than adhesive means the extension stays put under the vibration and thermal cycling that characterise real-world commuting and spirited road riding alike. The fit is precise because Puig develop model-specific extensions rather than universal cut-to-fit pieces; every mounting point aligns with the OEM mudguard geometry of the 690 Duke without any modification.\u003c\/p\u003e\u003ch2\u003eProtection Where It Counts\u003c\/h2\u003e\u003cp\u003eA front tyre hugger or splash guard is often overlooked until the radiator fins are clogged with road film or the engine casings are peppered with stone chips. This anti-splash guard effectively lengthens the front mudguard's coverage arc, intercepting debris before it reaches the engine bay. The result is a cleaner motorcycle, a longer service life for radiator and engine components, and measurably less spray deflected back towards the rider on wet roads. At 86 g the part adds no discernible weight, and the low-profile shape preserves the 690 Duke's purposeful naked-bike silhouette.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig front fender extension is designed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKTM 690 Duke (2015, 2016, 2017)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and variant before ordering. Puig produce model-specific extensions for a wide range of naked, type R and crosstourer motorcycles — ensure you select the reference correct for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368658657546,"sku":"3519N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3519N3.png?v=1787730560"},{"product_id":"puig-front-mudguard-extension-ktm-690-duke-r-2015-2017","title":"Puig Front Mudguard Extension for KTM 690 Duke R (2015–2017)","description":"\u003cp\u003eWhen every ride pushes the limits — on the road or heading to the track — keeping road debris, grit and water spray away from your engine and bodywork is non-negotiable. Puig's front mudguard extension for the KTM 690 Duke R (2015–2017) is a precision-fit, track-proven upgrade that dramatically extends the coverage of the factory fender, shielding your radiator, engine casings and frame from the relentless bombardment of stones, mud and standing water thrown up by the front tyre.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the original fender's coverage to deliver superior splash and debris protection at speed — ideal for track days and fast road riding alike\u003c\/li\u003e\n\u003cli\u003eFormed from impact-resistant ABS plastic, engineered to absorb knocks without cracking or deforming under sustained use\u003c\/li\u003e\n\u003cli\u003eDedicated fitment for the KTM 690 Duke R (2015–2017) — no cutting, no drilling, no modification required\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment directly to the OEM mudguard\u003c\/li\u003e\n\u003cli\u003eFeatherweight at just 86 g, adding meaningful protection with zero noticeable impact on handling or weight distribution\u003c\/li\u003e\n\u003cli\u003eSatin black finish integrates cleanly with the 690 Duke R's aggressive naked-bike aesthetic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance \u0026amp; Road Debris Protection\u003c\/h2\u003e\u003cp\u003eThe KTM 690 Duke R's short-nosed factory fender was designed with style in mind — at race pace or in heavy rain, it simply cannot intercept everything the front tyre launches rearward. Puig's front fender extension fills that gap decisively. Bolted in place ahead of your next track session or tour, it deflects stones and wet road debris before they reach the radiator fins, oil cooler, engine covers and lower fairing, reducing wear, preventing paint chips and keeping post-ride clean-up to a minimum.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Installation\u003c\/h2\u003e\u003cp\u003ePuig manufactures this anti-splash guard from high-grade ABS plastic — a material chosen for its balance of rigidity, impact resistance and low weight. Unlike flimsy universal mudflap solutions, this is a purpose-built front splash guard designed around the exact geometry of the 690 Duke R's stock mudguard. Plastic rivets are included in the box, providing a flush, rattle-free mounting that stays put even when the bike is pushed hard. Puig also supplies fitting tips with the part to streamline the installation process — no specialist tools needed.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eKTM 690 Duke R (2015–2017)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368658755850,"sku":"3519N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3519N3_31940e86-fbaf-4517-aa8e-4e51938b35c8.png?v=1787730563"},{"product_id":"puig-front-mudguard-extension-suzuki-dl1050xt-v-strom-2020-2023","title":"Puig Front Mudguard Extension for Suzuki DL1050XT V-strom (2020–2023)","description":"\u003cp\u003eEngineered to go beyond the coverage of the standard mudguard, the Puig front fender extension for the Suzuki DL1050XT V-strom delivers serious road debris protection for riders who demand more from their machine — whether chasing distance on demanding roads or pushing hard through varied terrain. By dramatically extending the sweep of the OEM front mudguard, it shields the engine, radiator, and lower fairing from the constant barrage of stones, water, and road filth thrown up by the front tyre.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the factory mudguard to provide measurably greater front splash guard coverage, protecting the engine, radiator, and frame from road debris\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — resilient, lightweight, and resistant to cracking under sustained road punishment\u003c\/li\u003e\n\u003cli\u003eFinished in black to integrate cleanly with the DL1050XT V-strom's existing bodywork without visual compromise\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment directly to the OEM fender — no drilling, no improvisation\u003c\/li\u003e\n\u003cli\u003eInstallation tips included in the box to simplify fitment and ensure correct positioning first time\u003c\/li\u003e\n\u003cli\u003ePuig-engineered specifically for this model, guaranteeing precise alignment with the original mudguard profile\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Demanding Routes\u003c\/h2\u003e\u003cp\u003eThe DL1050XT V-strom is a machine built for covering ground fast, and at higher speeds the front tyre flings debris and spray with considerably more force than casual riding generates. The standard factory mudguard was designed to minimum production tolerances; it leaves the radiator, lower engine cases, and fork legs exposed to constant stone strike and wet-weather contamination. This Puig front mudguard extension closes that gap decisively. The rigid ABS construction holds its shape under impact rather than flexing away, meaning the protection remains effective even when the riding gets spirited. Riders using their V-strom on track days or high-pace road routes will notice a genuine reduction in stone chips and brake-dust accumulation on components that are expensive and time-consuming to clean or replace.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003ePuig manufactures this front fender extender using ABS plastic rated for high-impact resistance — the same category of engineering polymer used widely across OEM bodywork for its balance of stiffness, low weight, and durability. The surface carries a uniform black finish that resists fading and coordinates naturally with the DL1050XT's lower body panels. Mounting is handled by the supplied plastic rivets, which anchor the extension firmly to the original mudguard. The resulting fitment is permanent and rattle-free, with no reliance on adhesive tape or improvised hardware. A set of fitting tips is included to guide correct placement and make the installation straightforward even for riders working at home.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extension is designed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki DL1050XT V-strom (2020–2023)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and variant before ordering. Puig reference: 3663.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e896 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368660459786,"sku":"3663N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3663N2.png?v=1787730568"},{"product_id":"puig-front-mudguard-extension-suzuki-dl1050-v-strom-2020-2025","title":"Puig Front Mudguard Extension for Suzuki DL1050 V-strom (2020–2025)","description":"\u003cp\u003eDesigned specifically for the Suzuki DL1050 V-strom, this Puig front mudguard extension gives your bike meaningful additional protection where it counts most — shielding the engine, radiator and lower bodywork from road spray, grit and debris thrown up by the front tyre on every ride. It is the kind of practical, low-cost upgrade that pays for itself the first time you avoid a pressure-wash session or a stone chip on a critical component.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the coverage of the original front mudguard to dramatically reduce road spray reaching the engine and radiator\u003c\/li\u003e\n\u003cli\u003eMoulded in high-impact ABS plastic for lasting resistance to stone strikes and everyday road debris\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment directly to the OEM fender — no drilling of the frame required\u003c\/li\u003e\n\u003cli\u003eInstallation tips included in the box to guide correct placement and alignment\u003c\/li\u003e\n\u003cli\u003eClean matte black finish integrates seamlessly with the V-strom's standard bodywork\u003c\/li\u003e\n\u003cli\u003eModel-specific fitment engineered for the DL1050 V-strom (2020–2025) — no adaptation or modifications needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Protection, Zero Fuss\u003c\/h2\u003e\u003cp\u003eThe stock mudguard on the DL1050 V-strom does a reasonable job, but there is a noticeable gap between its trailing edge and the engine bay. In mixed conditions — wet commutes, touring on greasy A-roads or light off-road tracks — that gap allows a continuous stream of dirty water and road debris to coat the radiator and lower engine casings. The Puig extension closes that gap with a purpose-shaped ABS panel that attaches cleanly to the underside of the original fender using the supplied plastic rivets. The result is a front splash guard that works quietly in the background on every journey, keeping service intervals honest and resale values healthier.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eABS plastic is the material of choice for mudguard extensions for good reason: it absorbs impacts without cracking, resists the UV degradation that turns cheaper plastics brittle, and maintains its shape across a wide temperature range. Puig manufactures this extension to the same standards applied across their full range of fairings and bodywork accessories, so the surface finish and panel consistency are well above the aftermarket average. At 896 g the part adds negligible unsprung weight while delivering a meaningful functional improvement over the standard setup.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis extension is a direct, model-specific fit for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki DL1050 V-strom (2020–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePuig reference: 3663. The part mounts to the original OEM fender using the included plastic rivets. No cutting, bonding or custom fabrication is required. Puig includes placement tips to make the installation straightforward even for riders working at home with basic tools.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for OEM fender mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e896 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368660754698,"sku":"3663N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3663N2_9d307d6a-9118-4836-964f-de0585e9531e.png?v=1787730571"},{"product_id":"puig-front-mudguard-extension-suzuki-dl1000-v-strom-2015-2019","title":"Puig Front Mudguard Extension for Suzuki DL1000 V-strom (2015–2019)","description":"\u003cp\u003ePuig's front mudguard extension for the Suzuki DL1000 V-strom brings a purposeful, factory-matched aesthetic alongside genuine functional gains — a clean matte black finish integrates seamlessly with the DL1000's existing bodywork while shielding the engine, radiator and lower fairing from road debris, standing water and trail grime that the standard fender simply cannot intercept.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered specifically for the Suzuki DL1000 V-strom (2015–2019), ensuring a precise, gap-free fit against the OEM mudguard\u003c\/li\u003e\n\u003cli\u003eFormed from impact-resistant ABS plastic — the same material class used across Puig's touring and adventure guard range for proven durability on long-distance and mixed-terrain riding\u003c\/li\u003e\n\u003cli\u003eBlack finish is carefully matched to complement the V-strom's colour scheme, preserving the bike's clean adventure-touring silhouette\u003c\/li\u003e\n\u003cli\u003eExtends the coverage arc of the front fender to deflect road debris, mud and spray away from the radiator, engine casings and rider's legs\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a permanent, rattle-free attachment to the original mudguard — no drilling or modification required\u003c\/li\u003e\n\u003cli\u003ePuig includes fitment tips in the box to streamline installation, making this a straightforward workshop or garage job\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been producing fairing, protection and aerodynamic components since 1964, and that depth of experience shows in the detail of this front fender extender. The extension is not an afterthought bolt-on: its profile is drawn directly from the OEM fender geometry of the DL1000 V-strom, so the finished result looks integrated rather than added on. The black ABS surface carries a consistent matte quality that ages well on adventure bikes regularly exposed to sun, stone chips and trail mud.\u003c\/p\u003e\u003cp\u003eFor riders who use their V-strom as it was intended — loaded touring, commuting in all weathers, green-lane exploration — this front splash guard quietly does a significant job. It keeps brake components, radiator fins and wiring looms cleaner between services, and reduces the spray that reaches the rider on wet roads.\u003c\/p\u003e\u003ch2\u003ePerformance and Protection\u003c\/h2\u003e\u003cp\u003eThe front mudguard extension works by lengthening the effective sweep of the fender, bringing the leading edge lower and further forward relative to the tyre contact patch. This geometry change intercepts debris and water at a shallower angle, reducing the energy with which stones and grit reach sensitive components. The anti-splash guard function is especially valuable on the DL1000, where the radiator sits close behind the front wheel and is directly exposed to anything the standard fender misses.\u003c\/p\u003e\u003cp\u003eABS plastic was chosen for its balance of rigidity and impact absorption — it flexes under a stone strike rather than cracking, and it resists the UV degradation and temperature cycling that weaken cheaper materials over time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed and tested to fit the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki DL1000 V-strom (2015–2019)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eInstallation uses the supplied plastic rivets to attach the extension permanently to the motorcycle's original mudguard. Puig also includes practical placement tips to guide you through fitment. Note: reference 9203N is offered with adhesive for alternative installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for OEM fender mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e896 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368661639434,"sku":"3663N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3663N2_effcf14c-8705-4f87-b4c4-ab070a45510f.png?v=1787730575"},{"product_id":"puig-front-fender-extension-honda-cb300r-neo-sports-cafe-2018-2025","title":"Puig Front Fender Extension for Honda CB300R NEO Sports Cafe (2018–2025)","description":"\u003cp\u003eKeep the road grime, stones and standing water where they belong with this Puig front fender extension for the Honda CB300R NEO Sports Cafe (2018–2025). Built to reinforce your bike's original mudguard, it upgrades everyday splash and debris protection without altering the CB300R's clean naked-bike lines.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends coverage of the OEM front fender for genuine anti-splash and road debris protection\u003c\/li\u003e\n\u003cli\u003eMoulded in impact-resistant ABS plastic for long-term durability\u003c\/li\u003e\n\u003cli\u003eMatte black finish blends seamlessly with the CB300R's factory styling\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original mudguard\u003c\/li\u003e\n\u003cli\u003ePuig-supplied fitting tips included to simplify installation\u003c\/li\u003e\n\u003cli\u003eLightweight construction at just 66 g adds negligible mass to the front end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for Real-World Protection\u003c\/h3\u003e\u003cp\u003eRiding a naked bike like the CB300R means the engine, radiator and lower fairing area are more exposed to spray and flying debris than on a fully-faired machine. This front mudguard extension acts as an effective fender extender, pushing water, mud and stone chips further away from the engine, radiator and rider, reducing the risk of damage and keeping you drier in wet conditions.\u003c\/p\u003e\u003ch3\u003eQuality Materials, Simple Fitment\u003c\/h3\u003e\u003cp\u003eMade from ABS plastic chosen for its strength and resistance to knocks, this splash guard is designed to take the punishment of daily road wear. Installation is straightforward: Puig includes the plastic rivets needed to fix the extension permanently to your original fender, along with fitting tips to help you get it positioned correctly first time.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the Honda CB300R NEO Sports Cafe (2018–2025).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368661901578,"sku":"3678N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3678N4.png?v=1787730581"},{"product_id":"puig-front-fender-extension-honda-cb125r-neo-sports-cafe-2018-2025","title":"Puig Front Fender Extension for Honda CB125R NEO Sports Cafe (2018–2025)","description":"\u003cp\u003eWhen you're pushing your CB125R NEO Sports Cafe hard, whether carving through wet corners on the road or chasing lap times on track days, road debris and standing water thrown up by the front tyre can hammer your engine, radiator and lower fairing. This Puig front fender extension closes that gap in your stock mudguard, giving your bike serious extra splash and stone protection exactly where it's needed most.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront fender extender that lengthens the coverage of the OEM front mudguard\u003c\/li\u003e\n\u003cli\u003eReduces road debris and spray reaching the engine and radiator area during hard riding or wet conditions\u003c\/li\u003e\n\u003cli\u003eMoulded in durable, impact-resistant ABS plastic for long-term reliability\u003c\/li\u003e\n\u003cli\u003eBlack finish blends seamlessly with the CB125R NEO Sports Cafe's factory styling\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original fender\u003c\/li\u003e\n\u003cli\u003eLightweight at just 66 g, so there's no noticeable effect on handling or agility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for Performance Riding\u003c\/h3\u003e\u003cp\u003eOn track or during aggressive road riding, front tyre splash and debris can be a genuine distraction and a real risk to components like the radiator and engine casings. This mudguard extension acts as an anti-splash guard and tyre hugger, directing spray and stones away from vulnerable areas, effectively adding engine splash protection and radiator protection without altering the bike's silhouette. It's a small part with a real functional impact on protection and confidence at speed.\u003c\/p\u003e\u003ch3\u003eStraightforward Fitment\u003c\/h3\u003e\u003cp\u003ePuig designs this front mudguard extension specifically for the CB125R NEO Sports Cafe, so it mounts directly to the OEM fender using the supplied plastic rivets. Puig also includes fitting guidance to make installation quick and accurate, so you can get the added protection sorted before your next ride or session.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eCompatible with the Honda CB125R NEO Sports Cafe (2018–2025).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368662589706,"sku":"3678N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3678N4_8eac8ab2-cca8-4a67-936e-b476ac0d4fb6.png?v=1787730585"},{"product_id":"puig-front-fender-extension-honda-cb500x-2019-2021","title":"Puig Front Fender Extension for Honda CB500X (2019–2021)","description":"\u003cp\u003eKeep road debris, mud and grit exactly where it belongs with this Puig front fender extension, engineered specifically for the Honda CB500X (2019–2021). Built in durable ABS plastic, it extends the coverage of your original mudguard for genuinely improved protection against everyday hazards, without altering the bike's factory look.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImproves protection over the standard OEM front fender\u003c\/li\u003e\n\u003cli\u003eHigh-impact ABS plastic construction for lasting durability\u003c\/li\u003e\n\u003cli\u003eReduces road debris protection gaps, shielding the engine, radiator and lower fairings from spray and grit\u003c\/li\u003e\n\u003cli\u003eActs as an effective front tyre hugger and anti-splash guard in wet or loose-surface conditions\u003c\/li\u003e\n\u003cli\u003eDiscreet black finish that matches the OEM fender for a factory-fit appearance\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent fit to the original mudguard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Fit a Front Mudguard Extension\u003c\/h2\u003e\u003cp\u003eA stock fender often leaves the underside of the engine, radiator and front wheel area exposed to thrown-up water, mud and stones. This front fender extender closes that gap, giving your CB500X extra engine splash protection and radiator protection where it matters most - useful for commuting, touring or off-road-style riding on varied surfaces.\u003c\/p\u003e\u003ch3\u003eStraightforward Fitment\u003c\/h3\u003e\u003cp\u003ePuig supplies the necessary plastic rivets for a permanent, secure attachment directly to your Honda CB500X's original front fender, along with fitting guidance to make installation straightforward.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the Honda CB500X (2019–2021). Puig reference: 3679.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368663277834,"sku":"3679N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3679N4.png?v=1787730592"},{"product_id":"puig-front-mudguard-extension-honda-cbr650r-eclutch-2019-2026","title":"Puig Front Mudguard Extension for Honda CBR650R \/ Eclutch (2019–2026)","description":"\u003cp\u003eRiding the Honda CBR650R day after day demands protection that keeps pace with your commitment. This Puig front mudguard extension fits directly onto your CBR650R's original fender, extending coverage to shield the engine, radiator and lower bodywork from road debris, standing water and grime thrown up by the front tyre — letting you focus entirely on the ride ahead.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the stock mudguard for significantly improved engine splash protection and road debris deflection\u003c\/li\u003e\n\u003cli\u003eMoulded from impact-resistant ABS plastic engineered to handle the daily punishment of road riding in all conditions\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the OEM front fender — no drilling required\u003c\/li\u003e\n\u003cli\u003eTips included in the box to simplify alignment and placement during installation\u003c\/li\u003e\n\u003cli\u003eSlim, integrated profile in a black finish that blends cleanly with the CBR650R's existing bodywork\u003c\/li\u003e\n\u003cli\u003eLightweight at just 86 g, adding meaningful protection without any perceptible weight penalty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Road Performance\u003c\/h2\u003e\u003cp\u003ePuig designs this front fender extender with the everyday rider in mind. The ABS construction balances rigidity and flex tolerance, meaning it absorbs the kind of stone strikes and debris impacts that would otherwise reach your radiator, lower fairing or riding gear. At 86 g, the extension adds no meaningful mass to the front end, and the black ABS finish resists fading under prolonged UV exposure. The rivet-mount system creates a firm mechanical bond to the Honda's original mudguard, eliminating the flex or rattle that can affect clip-on or tape-mounted alternatives.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003ePuig includes plastic rivets and fitting tips with every extension to make the installation process as straightforward as possible. The part locates onto the OEM front mudguard and is secured with the supplied rivets for a permanent, rattle-free fit. No permanent modification to the original fender is required, making it an ideal upgrade for owners who want protection without compromising the factory finish.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed and tested to fit the following Honda models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR650R (2019–2026)\u003c\/li\u003e\n\u003cli\u003eHonda CBR650R Eclutch (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368663605514,"sku":"3680N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3680N3.png?v=1787730597"},{"product_id":"puig-front-mudguard-extension-honda-cbr500r-eclutch-2022-2026","title":"Puig Front Mudguard Extension for Honda CBR500R \/ Eclutch (2022–2026)","description":"\u003cp\u003eLong days in the saddle demand a machine that stays clean and a rider who stays comfortable. Puig's front mudguard extension for the Honda CBR500R and CBR500R Eclutch (2022–2026) wraps neatly over the original fender to intercept road grime, standing water and road debris before they reach the engine, radiator and your boots — so every ride finishes as cleanly as it started.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered ABS plastic construction offers high impact resistance, keeping the extension intact over repeated encounters with road debris and stone strikes.\u003c\/li\u003e\n\u003cli\u003eSignificantly increases the coverage area of the original fender, acting as a front splash guard to shield the engine bay and radiator from water, mud and grit.\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a permanent, rattle-free attachment directly to the stock mudguard — no drilling or modification required.\u003c\/li\u003e\n\u003cli\u003eSleek black finish integrates naturally with the CBR500R's existing bodywork for a factory-fitted appearance.\u003c\/li\u003e\n\u003cli\u003eFeatherlight at just 86 g, so there is zero measurable impact on handling or overall weight distribution.\u003c\/li\u003e\n\u003cli\u003ePuig produces model-specific front mudguard extensions across a wide range of popular motorcycles — naked, sport and touring — ensuring precise fitment every time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Comfort Through Smart Protection\u003c\/h2\u003e\u003cp\u003eA front fender extender does far more than protect paintwork. On a machine you use daily or for longer touring runs, reducing the spray that soaks footwear, wets controls and fogs visors translates directly into a more relaxed, fatigue-free riding experience. The Puig front mudguard extension clips to the Honda CBR500R's original fender using the included plastic rivets, creating a seamless anti-splash guard with no permanent alterations to the motorcycle. Installation is straightforward: Puig includes fitting guidance to help position the part correctly before the rivets are set.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eThe extension is formed from high-grade ABS plastic — the same material family used throughout modern motorcycle fairings — chosen for its balance of rigidity, flex tolerance and resistance to UV degradation. The surface carries a consistent matte-style black finish that resists fading and blends with the CBR500R's standard colour scheme. At 86 g, the part adds effective engine splash protection and road debris protection with no compromise to the motorcycle's handling characteristics.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is a direct, model-specific fitment for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR500R (2022–2026)\u003c\/li\u003e\n\u003cli\u003eHonda CBR500R Eclutch (2022–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePuig part reference: 3680N (puigref-3680). Always verify your model year before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLabel\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368663834890,"sku":"3680N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3680N3_938c5bf1-494e-4ac3-aaa2-d9c61c61d8f2.png?v=1787730600"},{"product_id":"puig-front-mudguard-extension-honda-cb650r-neo-sports-cafe-eclutch","title":"Puig Front Mudguard Extension for Honda CB650R NEO Sports Cafe \/ Eclutch (2019–2026)","description":"\u003cp\u003ePurposefully designed to complement the clean Neo Sports Cafe aesthetic of the Honda CB650R, this Puig front mudguard extension delivers genuine road debris protection without compromising the bike's sharp, minimalist lines. Finished in black to integrate seamlessly with the factory mudguard, it reflects Puig's decades of experience engineering precision-fit accessories for the world's most popular motorcycles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the coverage of the original front mudguard, shielding the engine, radiator and lower bodywork from mud, water and road debris thrown up by the front tyre.\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — lightweight at just 86 g, yet resilient enough to absorb stone strikes and deflect splash day after day.\u003c\/li\u003e\n\u003cli\u003eBlack finish is chosen to match the Honda CB650R's factory mudguard and overall colour scheme, maintaining a factory-correct appearance.\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment to the OEM fender — no drilling or fabrication required.\u003c\/li\u003e\n\u003cli\u003ePuig includes fitment tips to simplify installation and ensure correct, flush positioning first time.\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered specifically for the CB650R NEO Sports Cafe and Eclutch variants across the full 2019–2026 model range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been developing motorcycle accessories from Barcelona since 1964, and that heritage shows in the detail. Rather than offering a generic universal extender, Puig produces a dedicated front splash guard for each specific model, ensuring panel-gap consistency and a finish that looks as though it left the factory that way. The black ABS surface is moulded to follow the curvature of the CB650R's original front mudguard, so there are no unsightly gaps or mismatched profiles — just clean, cohesive protection that suits the retro-modern character of the NEO Sports Cafe.\u003c\/p\u003e\u003ch2\u003eProtection on the Road\u003c\/h2\u003e\u003cp\u003eTown riding and wet-weather commutes generate a constant barrage of water, grit and road debris channelled directly upward by the front wheel. The standard mudguard on the CB650R leaves the lower engine cases, radiator and brake components partially exposed to this spray. By extending the coverage area forward and downward, this front fender extender intercepts that debris stream before it reaches critical components, reducing corrosion risk, keeping your riding gear cleaner and protecting against stone chips on painted or anodised parts. It functions equally well as an anti-splash guard on fast A-roads as it does in slow urban traffic.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis mudguard extension is a direct, model-specific fit for the following Honda motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CB650R NEO Sports Cafe (2019–2026)\u003c\/li\u003e\n\u003cli\u003eHonda CB650R NEO Sports Cafe Eclutch (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo modification to the original fender is required. The supplied plastic rivets locate through existing or self-piercing points to fix the extension firmly in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368665702666,"sku":"3680N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3680N3_cd350fd0-8039-4536-8cad-d4a80d8b0d8f.png?v=1787730603"},{"product_id":"puig-front-mudguard-extension-honda-cb500f-2022-2024","title":"Puig Front Mudguard Extension for Honda CB500F (2022–2024)","description":"\u003cp\u003ePuig's front mudguard extension for the Honda CB500F (2022–2024) is a precise, factory-matched addition that builds on the original fender's design language while delivering a meaningful upgrade in splash and debris protection. Formed in high-impact ABS plastic and finished in gloss black, it integrates cleanly with the CB500F's aesthetic — no raw edges, no compromise on appearance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends and enhances the protection offered by the Honda CB500F's original front fender, shielding the engine, radiator and lower bodywork from road spray and debris thrown up by the front tyre.\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — lightweight at just 86 g yet resistant to stone chips, road grit and everyday riding stresses.\u003c\/li\u003e\n\u003cli\u003eGloss black finish is designed to complement the CB500F's stock colour scheme without visual mismatch.\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment to the OEM mudguard — no drilling or specialist tools required.\u003c\/li\u003e\n\u003cli\u003ePuig includes fitting guidance to make installation straightforward, even for riders working at home.\u003c\/li\u003e\n\u003cli\u003ePurpose-designed for the naked-bike segment, reflecting Puig's deep catalogue knowledge across the most widely ridden motorcycle categories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has been engineering motorcycle accessories from Barcelona since 1964, and that heritage shows in how this front splash guard is conceived. Rather than a generic extender cut to rough dimensions, it is a model-specific part developed around the CB500F's actual fender profile. The ABS construction keeps weight to an absolute minimum — the entire piece tips the scales at just 86 g — while the gloss black surface treatment ensures it looks like it belongs rather than like an afterthought. For riders who take pride in a clean, cohesive machine, that distinction matters.\u003c\/p\u003e\u003ch2\u003eProtection Where It Counts\u003c\/h2\u003e\u003cp\u003eA standard front mudguard on a naked motorcycle covers only the most immediate arc above the tyre. At motorway speeds or on wet roads, spray, mud and road debris travel well beyond that arc, reaching the lower fork legs, the radiator, the engine cases and even the rider's boots and lower legs. This front fender extension closes that gap. By lengthening the effective coverage of the OEM fender, it acts as an anti-splash guard that reduces the volume of contamination reaching critical components — keeping the engine bay cleaner, the radiator free from accumulated grit, and your riding kit in better condition ride after ride.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CB500F (2022–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt mounts directly to the motorcycle's original front mudguard using the supplied plastic rivets, requiring no permanent modification to the bike itself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for mounting to the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368666358026,"sku":"3680N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3680N3_ec75d113-d076-435b-93af-dc9cd6dd9b03.png?v=1787730606"},{"product_id":"puig-front-mudguard-extension-honda-cb500-hornet-eclutch-2024-2026","title":"Puig Front Mudguard Extension for Honda CB500 Hornet \/ Eclutch (2024–2026)","description":"\u003cp\u003eEngineered to exceed the coverage of the stock front mudguard, the Puig front mudguard extension for the Honda CB500 Hornet and CB500 Hornet Eclutch (2024–2026) delivers proven road debris protection and engine splash protection without a single drill hole or permanent modification to your motorcycle's frame. Crafted from high-impact ABS plastic in a clean black finish, this front fender extender integrates seamlessly with the factory mudguard to form a cohesive, purpose-built defence line between your engine and the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSignificantly extends the coverage of the original front fender, channelling water, grit and road debris away from the engine, radiator and lower fairing panels.\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — resistant to stone strikes, fuel splash and UV degradation for long-term durability.\u003c\/li\u003e\n\u003cli\u003eSupplied with dedicated plastic rivets for a secure, permanent attachment directly to the OEM mudguard — no drilling, no guesswork.\u003c\/li\u003e\n\u003cli\u003ePuig provides installation tips included with the part to simplify fitment and ensure correct positioning first time.\u003c\/li\u003e\n\u003cli\u003eLightweight at just 86 g, adding meaningful protection without any measurable impact on handling or unsprung weight.\u003c\/li\u003e\n\u003cli\u003eFinished in black to match the CB500 Hornet's factory colour scheme, maintaining the bike's clean street aesthetic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built Anti-Splash Guard\u003c\/h2\u003e\u003cp\u003eOn the Honda CB500 Hornet and Eclutch variant, the OEM mudguard leaves the lower engine cases, radiator and rider's boots exposed to the constant spray thrown up by the front tyre in wet conditions. The Puig front splash guard closes that gap. Rivet-mounted to the underside of the stock fender, it extends the mud-shedding surface far enough to redirect contaminated water and debris before it reaches sensitive components. The result is a cleaner engine bay, reduced wear on seals and hoses, and noticeably drier boots on commutes or touring runs in mixed weather.\u003c\/p\u003e\u003ch2\u003ePrecise Fitment, Minimal Installation Time\u003c\/h2\u003e\u003cp\u003ePuig designs model-specific fender extenders rather than generic kits, meaning the profile of this piece is shaped precisely for the CB500 Hornet's OEM mudguard geometry. The included plastic rivets lock the extension in place permanently without tools beyond a basic trim rivet tool. Puig also packages printed fitting guidance with the part to walk you through alignment and rivet placement — a small detail that removes all ambiguity from the installation process.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CB500 Hornet \/ Eclutch (2024–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways confirm your motorcycle's model year before ordering. This extension mounts to the original OEM front fender and is not intended for use with aftermarket mudguards of differing profiles.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368666685706,"sku":"3680N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3680N3_e6b86b4e-dd78-4cbf-9cce-55aaa8fe2f30.png?v=1787730609"},{"product_id":"puig-front-mudguard-extension-husqvarna-vitpilen-401-2018-2023","title":"Puig Front Mudguard Extension for Husqvarna Vitpilen 401 (2018–2023)","description":"\u003cp\u003eFitted directly to the Husqvarna Vitpilen 401's original front mudguard, this Puig front fender extension delivers a straightforward upgrade that pays dividends every day — keeping road debris, mud and front tyre spray away from the engine, radiator and your riding gear without altering the bike's silhouette.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the OEM front mudguard for noticeably improved splash and debris protection on road and in wet conditions\u003c\/li\u003e\n\u003cli\u003eMoulded in impact-resistant ABS plastic, purpose-built to handle stone strikes, road grit and UV exposure\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a secure, permanent attachment to the factory mudguard — no drilling or specialist tools required\u003c\/li\u003e\n\u003cli\u003eFinished in black to integrate cleanly with the Vitpilen 401's dark bodywork\u003c\/li\u003e\n\u003cli\u003eInstallation tips included in the box to make fitting straightforward for any home mechanic\u003c\/li\u003e\n\u003cli\u003eA lightweight anti-splash guard at just 66 g — zero noticeable effect on handling or unsprung weight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eFor Vitpilen 401 riders who spend real time on public roads, front tyre hugger coverage is one of the most practical investments you can make. Without adequate extension, the standard mudguard allows a surprising amount of road spray to reach the radiator, lower frame and engine cases — accelerating corrosion and adding to cleaning time. Puig's front mudguard extension closes that gap immediately and at minimal cost, making it an easy decision for commuters and weekend riders alike.\u003c\/p\u003e\u003cp\u003eThe plastic rivet mounting system means there is nothing to weld or bond, and the fit is governed by Puig's model-specific tooling for the 2018–2023 Vitpilen 401 — so alignment is accurate out of the box. The included fitting guide further reduces guesswork, keeping the job well within reach of anyone with basic hand tools.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eABS plastic is the material of choice for original-equipment mudguards on production motorcycles precisely because it balances low weight with high impact resistance. Puig mirrors that standard here, ensuring the extension can absorb repeated stone impacts and flex under load rather than crack. The black finish is consistent across the moulding, so it does not fade to an obvious grey at the edges over time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extension is designed and tested specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHusqvarna Vitpilen 401 (2018–2023)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt mounts directly onto the OEM front mudguard using the supplied plastic rivets. No modification to the original fender or chassis is required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368667734282,"sku":"3681N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3681N2.png?v=1787730616"},{"product_id":"puig-front-mudguard-extension-husqvarna-vitpilen-125-2024-2025","title":"Puig Front Mudguard Extension for Husqvarna Vitpilen 125 (2024–2025)","description":"\u003cp\u003eEngineered to meet the exacting protection demands of urban and open-road riding, the Puig front mudguard extension for the Husqvarna Vitpilen 125 (2024–2025) is a straightforward, no-compromise upgrade that significantly expands coverage beyond the standard fender. Manufactured from high-impact ABS plastic and supplied with dedicated plastic rivets for a secure, permanent fit, it delivers proven road debris protection and engine splash protection exactly where the original equipment falls short.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSubstantially improves on the protection offered by the original mudguard, shielding the engine bay, frame and radiator from road debris, stones and water spray thrown up by the front tyre\u003c\/li\u003e\n\u003cli\u003eConstructed from high-impact ABS plastic — a material chosen for its rigidity, impact resistance and long-term resistance to weathering and UV degradation\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a permanent, rattle-free attachment directly to the factory fender — no drilling, no guesswork\u003c\/li\u003e\n\u003cli\u003eAt just 66 g, this front fender extender adds meaningful anti-splash guard capability without any appreciable weight penalty\u003c\/li\u003e\n\u003cli\u003eClean matte black finish integrates seamlessly with the Vitpilen 125's dark, minimalist aesthetic\u003c\/li\u003e\n\u003cli\u003ePuig provides fitting tips alongside the part to streamline installation on your specific motorcycle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Purpose\u003c\/h2\u003e\u003cp\u003eThe Puig front mudguard extension is purpose-designed for riders who want credible front splash guard performance without modifying the original fender. The ABS shell clips forward and downward of the stock mudguard, extending the swept area to intercept road debris, grit and water before it reaches the engine, radiator and lower fairing panels. The result is a measurably cleaner motorcycle after wet or dirty rides and a genuine reduction in the volume of debris that might otherwise strike the rider's boots and lower legs.\u003c\/p\u003e\u003cp\u003ePuig produces model-specific fender extenders across a wide range of popular motorcycles — naked, Type R, crosstourer and beyond — ensuring that fitment geometry is optimised for each application rather than relying on universal brackets or adaptors. The Vitpilen 125 variant is no exception: it is dimensioned and contoured to sit flush against the original mudguard with no unsightly gaps or misaligned edges.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting is straightforward and requires no specialist tools. The extension mounts directly onto the motorcycle's original mudguard using the plastic rivets included in the package. Puig also includes installation tips to guide correct placement, ensuring the extender sits at the optimal angle for maximum road debris protection and a factory-quality appearance. Note that reference 9203N is the sole variant in the Puig fender extension range that uses adhesive rather than rivets for installation — all other references, including this one, use the rivet method described above.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHusqvarna Vitpilen 125 (2024–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and variant before ordering. If you are unsure of compatibility, the Inter-Pace team is available to confirm fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368668520714,"sku":"3681N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3681N2_87916f05-3019-412b-9c28-343c975e6663.png?v=1787730619"},{"product_id":"puig-front-mudguard-extension-husqvarna-svartpilen-401-2018-2025","title":"Puig Front Mudguard Extension for Husqvarna Svartpilen 401 (2018–2025)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, the Puig front mudguard extension for the Husqvarna Svartpilen 401 is a precisely fitted, no-compromise upgrade to your stock fender. Where the original mudguard leaves the engine bay, radiator and lower fairing exposed to road debris and spray, this extension closes the gap — delivering meaningful splash and stone protection without altering the bike's silhouette.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-impact ABS construction resists stone strikes, flexing and UV degradation far better than thin OEM plastic\u003c\/li\u003e\n\u003cli\u003ePurpose-designed fitment for the Husqvarna Svartpilen 401 (2018–2025) — no trimming, drilling or modification required\u003c\/li\u003e\n\u003cli\u003eSupplied with plastic rivets for a permanent, rattle-free attachment directly to the original mudguard\u003c\/li\u003e\n\u003cli\u003eMatte black finish integrates seamlessly with the Svartpilen 401's dark, industrial aesthetic\u003c\/li\u003e\n\u003cli\u003eUltralight at just 66 g — zero perceptible impact on handling or unsprung weight\u003c\/li\u003e\n\u003cli\u003ePuig includes fitting tips in the box to streamline installation for a first-time fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig has used ABS plastic throughout this extension for a reason: the material offers an excellent balance of rigidity, impact resistance and light weight that cheaper alternatives simply cannot match. The moulding is tight and consistent, with no flash lines or stress marks, and the surface finish is uniform enough to sit flush against a factory mudguard without unsightly gaps. At 66 g the extension adds virtually nothing to the front end, yet its structural integrity is sufficient to deflect stones, mud and road spray that would otherwise blast the radiator, engine cases and the rider's legs on wet roads.\u003c\/p\u003e\u003ch2\u003eRoad Protection and Practical Benefits\u003c\/h2\u003e\u003cp\u003eThe front wheel of a naked street bike like the Svartpilen 401 throws a remarkable volume of water and debris rearward at speed. The standard fender covers the tyre arc adequately but leaves the gap between mudguard tip and engine almost completely unprotected. This Puig extension bridges that gap, acting as an anti-splash guard and road debris shield in one. Commuters will notice cleaner engine cases; weekend riders will appreciate the additional radiator protection on muddy or gravel-strewn roads. Installation takes minutes: press-fit the extension against the underside of the OEM fender and secure it with the included plastic rivets for a permanent, service-proof attachment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extender is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHusqvarna Svartpilen 401 (2018–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe extension mounts directly to the original mudguard using the supplied plastic rivets. No additional hardware, adhesive or modification is required for the above fitment. For Puig reference 9203N only, the part is alternatively offered with adhesive for tool-free installation — please check your reference number before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for OEM fender mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368669470986,"sku":"3681N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3681N2_5e3191c8-f500-41b7-831c-53829f25107c.png?v=1787730622"},{"product_id":"puig-front-mudguard-extension-husqvarna-svartpilen-125-2021-2025","title":"Puig Front Mudguard Extension for Husqvarna Svartpilen 125 (2021–2025)","description":"\u003cp\u003eWhen every ride demands reliable protection from road debris and front-wheel spray, the Puig front mudguard extension for the Husqvarna Svartpilen 125 delivers a precise, track-inspired upgrade over the standard fender. Engineered to intercept the grime, stones, and water that the stock mudguard lets through, it shields your engine, radiator, and lower frame from the relentless punishment of aggressive riding — on road or on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the coverage area of the original front mudguard, significantly reducing engine and radiator splash contamination from the front tyre\u003c\/li\u003e\n\u003cli\u003eFormed from high-impact ABS plastic — light at just 66 g yet resilient against stones, debris, and flex fatigue\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates seamlessly with the Svartpilen 125's dark, aggressive bodywork\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a permanent, rattle-free attachment to the OEM fender — no drilling, no fabrication\u003c\/li\u003e\n\u003cli\u003eAssembly tips included to make fitment straightforward and accurate first time\u003c\/li\u003e\n\u003cli\u003eModel-specific design ensures correct geometry and clearance for the 2021–2025 Svartpilen 125\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Protection on Road and Track\u003c\/h2\u003e\u003cp\u003eThe front fender extender concept originates squarely in motorsport, where engineers recognised that a short stock mudguard offers minimal splash-guard performance at speed. Puig applies that same thinking here: the extended profile intercepts debris and water at the point closest to the tyre, before it can arc upward and coat your engine cases, radiator fins, or riding gear. For Svartpilen 125 riders who push hard on fast country roads or use the bike in track days and training sessions, this anti-splash guard delivers a meaningful reduction in post-ride cleaning and long-term component wear caused by abrasive grit ingestion.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Materials\u003c\/h2\u003e\u003cp\u003eABS plastic is the material of choice for Puig's front mudguard extensions precisely because it balances low weight with genuine impact resistance. At 66 g, this front splash guard adds virtually nothing to the bike's unsprung mass — an important consideration on a light, agile machine like the Svartpilen 125 — while absorbing stone strikes and flex loads without cracking or distorting. The matte black surface finish resists fading and matches the OEM mudguard profile cleanly.\u003c\/p\u003e\u003cp\u003eFitment relies on the included plastic rivets, which lock the extension permanently to the original fender without risk of corrosion at the fixing points. Puig also packages assembly guidance to walk you through positioning, so the extension sits flush and centred without guesswork.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHusqvarna Svartpilen 125 (2021–2025)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368670322954,"sku":"3681N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3681N2_c6680a93-bdcf-4e31-9365-167fae8340f7.png?v=1787730626"},{"product_id":"puig-front-mudguard-extension-ktm-890-adventure-2021-2025","title":"Puig Front Mudguard Extension for KTM 890 Adventure (2021–2025)","description":"\u003cp\u003eEngineered from high-impact ABS plastic and finished in a clean matte black, the Puig front mudguard extension for the KTM 890 Adventure (2021–2025) raises the protection standard of the factory fender without compromise. Where the stock mudguard falls short, this precision-formed extension intercepts road debris, mud, and standing water before they reach the engine, radiator, and lower fairings — or find their way back towards the rider.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-impact ABS construction delivers outstanding resistance to stone strikes, flex fatigue, and UV degradation over years of hard use.\u003c\/li\u003e\n\u003cli\u003eActs as an effective front splash guard, shielding the engine bay, radiator, and lower bodywork from road debris, mud, and water spray thrown by the front tyre.\u003c\/li\u003e\n\u003cli\u003eMatched black finish integrates seamlessly with the KTM 890 Adventure's original front mudguard for a factory-correct appearance.\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment to the OEM fender — no drilling, no adhesive required for this reference.\u003c\/li\u003e\n\u003cli\u003eFeatherlight at just 66 g, adding meaningful protection without any perceptible change to handling or unsprung weight.\u003c\/li\u003e\n\u003cli\u003eDirect, model-specific fitment for the KTM 890 Adventure 2021 through 2025 — no modification or adaption necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003ePuig selects ABS plastic for this front fender extender precisely because of its superior impact resistance and dimensional stability across wide temperature ranges. Unlike cheaper polypropylene extensions that can crack in cold conditions or warp under engine heat, ABS maintains its shape and integrity ride after ride. The component is moulded to close tolerances so that it sits flush against the existing mudguard, eliminating unsightly gaps and ensuring the rivets bear load evenly across the mounting interface. At 66 g it adds negligible weight, yet the material thickness is sufficient to deflect gravel, grit, and road spray that would otherwise sandblast the lower engine castings and radiator core.\u003c\/p\u003e\u003ch2\u003eProtection and Performance on Road and Trail\u003c\/h2\u003e\u003cp\u003eThe KTM 890 Adventure's original front mudguard provides adequate coverage for general use, but riders who venture onto gravel tracks, wet roads, or mixed terrain quickly discover its limitations. This Puig front mudguard extension bridges that gap, extending coverage further down and rearward to create a genuine anti-splash guard that keeps the front wheel's debris field away from vulnerable components. The engine and radiator benefit directly — fewer stone chips, less ingested grit, and reduced thermal shock from cold water spray. Long-distance touring riders will also appreciate the added protection for luggage and lower leg fairings on motorway runs in wet conditions.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis front fender extension is designed and manufactured exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKTM 890 Adventure (2021, 2022, 2023, 2024, 2025)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe extension mounts directly onto the motorcycle's original front mudguard using the supplied plastic rivets, ensuring a firm and permanent fit with no requirement for drilling or modification to the bodywork.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for OEM fender mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368671666442,"sku":"3682N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3682N5.png?v=1787730633"},{"product_id":"puig-front-mudguard-extension-ktm-890-adventure-l-2021-2023","title":"Puig Front Mudguard Extension for KTM 890 Adventure L (2021–2023)","description":"\u003cp\u003eWhen the trail gets rough and road debris becomes a genuine concern, the Puig front mudguard extension for the KTM 890 Adventure L transforms your bike's standard fender into a serious piece of protection. Engineered to deflect mud, stones and road spray away from the engine, radiator and rider, this ABS extension is the straightforward, track-tested upgrade that adventure riders demand before heading anywhere serious.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends and reinforces the coverage of the original KTM 890 Adventure L fender, dramatically improving road debris protection and engine splash shielding.\u003c\/li\u003e\n\u003cli\u003eManufactured from high-impact ABS plastic — tough enough to absorb stone strikes and flex back without cracking, even under demanding off-road conditions.\u003c\/li\u003e\n\u003cli\u003eSupplied with dedicated plastic rivets for a permanent, rattle-free attachment directly to the stock mudguard — no drilling, no improvised hardware.\u003c\/li\u003e\n\u003cli\u003eAt just 66 g, this front fender extender adds meaningful anti-splash guard coverage without any perceptible weight penalty.\u003c\/li\u003e\n\u003cli\u003eFinished in gloss black to complement the KTM 890 Adventure L's aggressive styling — sits flush and looks factory-fitted from every angle.\u003c\/li\u003e\n\u003cli\u003ePuig supplies fitting tips alongside the extension to make installation straightforward, even in the garage with basic tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built Splash Defence\u003c\/h2\u003e\u003cp\u003eThe KTM 890 Adventure L's standard fender does a reasonable job on clean tarmac, but push the bike onto gravel stages, wet forest tracks or fast open roads and its limitations become obvious fast. The Puig front splash guard extension closes that gap decisively. By lengthening the effective sweep of the original mudguard, it intercepts wheel-thrown debris before it can reach the radiator, lower fairing panels or your riding boots. The result is less cleaning time, fewer stone chips on expensive components, and a more composed, professional appearance whether you are covering distance on tour or pushing the pace.\u003c\/p\u003e\u003ch2\u003eConstruction \u0026amp; Installation\u003c\/h2\u003e\u003cp\u003ePuig has designed this mudguard extension specifically around the geometry of the KTM 890 Adventure L's existing fender, so fitment is precise rather than approximate. The ABS plastic construction resists UV degradation and road chemicals while remaining light and resilient. Installation uses the included plastic rivets to secure the extension permanently to the OEM mudguard, creating a bond that will not loosen with vibration. Puig also includes practical placement tips so you can align the part correctly on the first attempt.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKTM 890 Adventure L (2021, 2022, 2023)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways confirm your exact model year and variant before ordering. Puig produces dedicated extensions for a wide range of popular motorcycle categories — naked, type R, crosstourer and adventure models — ensuring a precise, model-specific fit rather than a universal compromise.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets for OEM fender mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368672092426,"sku":"3682N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3682N5_ffc5f520-0451-4ac3-87d3-7bd91ab39c30.png?v=1787730636"},{"product_id":"puig-front-mudguard-extension-ktm-790-adventure-2019-2026","title":"Puig Front Mudguard Extension for KTM 790 Adventure (2019–2026)","description":"\u003cp\u003eLong days in the saddle demand confidence in your bike's protection, and the Puig front mudguard extension for the KTM 790 Adventure delivers exactly that. Moulded from impact-resistant ABS plastic and finished in black to complement the Adventure's bodywork, it bolts directly onto the original fender using the supplied plastic rivets — no drilling, no guesswork, no compromise on fit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the OEM front mudguard to provide superior road debris protection, shielding the engine, radiator and lower bodywork from stones, mud and water spray thrown up by the front tyre.\u003c\/li\u003e\n\u003cli\u003eMoulded in high-impact ABS plastic for lasting durability without adding meaningful weight — the complete extension weighs just 66 g.\u003c\/li\u003e\n\u003cli\u003eSupplied with purpose-made plastic rivets for a secure, permanent attachment to the stock mudguard — no cutting or modification required.\u003c\/li\u003e\n\u003cli\u003eFinished in black for a clean, factory-integrated appearance that suits the KTM 790 Adventure's adventure-touring aesthetic.\u003c\/li\u003e\n\u003cli\u003ePuig includes fitting guidance with every part to make installation straightforward at home or in the workshop.\u003c\/li\u003e\n\u003cli\u003ePrecise model-specific design ensures a flush, rattle-free fitment unique to the 790 Adventure platform.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection Where It Matters Most\u003c\/h2\u003e\u003cp\u003eThe KTM 790 Adventure's standard fender does a reasonable job on sealed roads, but push it onto gravel tracks, wet lanes or motorway miles and the shortfall quickly becomes apparent. Engine casings collect grit, the radiator picks up mud, and on longer rides that accumulation becomes a real concern. The Puig front fender extension closes that gap, acting as an effective front splash guard that redirects water and debris away from critical components before they reach them.\u003c\/p\u003e\u003cp\u003eAt 66 g the extension adds nothing noticeable to the handling balance of the 790 Adventure, yet the difference in cleanliness — and protection — after a wet or dusty ride is immediately obvious. It is the kind of quiet, confidence-building upgrade that makes all-day riding more relaxed.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003ePuig manufactures this front fender extender from ABS plastic — the same material class used across the brand's extensive fairing and bodywork accessory range. ABS is chosen for its balance of rigidity, impact resistance and dimensional stability across temperature extremes, making it a proven choice for an anti-splash guard that must cope with everything from summer motorways to cold-weather gravel. The matte black finish is consistent and UV-stable, resisting the fading that affects lesser aftermarket plastics.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting is designed to be accessible to any competent home mechanic. Puig supplies plastic rivets in the box specifically sized for this application, securing the extension directly to the KTM's original mudguard without any need for drilling or permanent modification. Puig also includes practical placement tips with the part to guide correct positioning before the rivets are set, ensuring a flush result first time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis mudguard extension is designed and tested specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKTM 790 Adventure (2019–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eImproves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic; supplied with plastic rivets to mount on the OEM fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e66 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368672452874,"sku":"3682N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3682N5_94f37d41-c4aa-46f8-bb01-4e6042561720.png?v=1787730641"},{"product_id":"puig-front-mudguard-extension-husqvarna-vitpilen-701-2018-2020","title":"Puig Front Mudguard Extension for Husqvarna Vitpilen 701 (2018–2020)","description":"\u003cp\u003eKeep your Vitpilen 701 cleaner and better protected every day with this front fender extension from Puig. Weighing just 86 g, it bolts directly onto the original mudguard using the supplied plastic rivets, adding a meaningful extra barrier against road debris, standing water and engine splash without any permanent modification to your motorcycle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends the stock front mudguard to significantly improve splash and road debris protection for the engine, radiator and lower fairing\u003c\/li\u003e\n\u003cli\u003eMoulded from impact-resistant ABS plastic for durable, long-lasting performance in all weather conditions\u003c\/li\u003e\n\u003cli\u003eSupplied complete with plastic rivets for a secure, permanent attachment to the original fender — no drilling or specialist tools required\u003c\/li\u003e\n\u003cli\u003eBlack finish integrates cleanly with the Vitpilen 701 styling without altering the bike's character\u003c\/li\u003e\n\u003cli\u003ePurpose-designed fitment for the Husqvarna Vitpilen 701, ensuring precise alignment with the OEM mudguard profile\u003c\/li\u003e\n\u003cli\u003eAt just 86 g, it adds genuine protection without any noticeable weight penalty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eFor riders who use the Vitpilen 701 on real roads in real conditions, accumulated grime and road debris are a constant concern. The Puig front fender extender addresses this in the simplest, most cost-effective way possible — a precisely moulded ABS extension that clips onto the factory mudguard with plastic rivets, turning a short stock fender into a genuinely capable front splash guard. The result is a cleaner motorcycle, a better-protected engine bay and less spray directed back at the rider on wet commutes or touring runs.\u003c\/p\u003e\u003cp\u003ePuig produces model-specific fender extensions for a wide range of popular motorcycles — naked bikes, sport tourers, crossover models and more — each shaped to mate perfectly with its corresponding OEM mudguard. This variant (Puig reference 3684) is engineered specifically for the Vitpilen 701 and requires no modifications to the original fender. Installation tips are included in the box to make fitment as straightforward as possible.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front mudguard extension is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHusqvarna Vitpilen 701 (2018–2020)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFunctional\u003c\/th\u003e\n\u003ctd\u003eIt improves the protection of the original fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eManufacturated in ABS plastic. Supplied with plastic rivets to mount on the oem fender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e86 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53368673337610,"sku":"3684N","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/3684N.png?v=1784194690"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/cut_0_4e19b7b6-e908-40a7-a243-605ec5f57137.png?v=1785223045","url":"https:\/\/inter-pace.com\/en-me\/collections\/mudguards.oembed?page=6","provider":"Inter-Pace","version":"1.0","type":"link"}