TK Dischi Freno SBK 6.0 Brake Disc Kit for Suzuki GSX-R 1000 (2017–2023)

Engineered to meet the demands of MotoGP and World Superbike competition, the TK Dischi Freno SBK 6.0 brake disc kit brings certified Italian race technology directly to your Suzuki GSX-R 1000 (2017–2023). At 6.0 mm thickness and with intelligently angled drillings throughout the friction ring, these discs deliver consistent, fade-free stopping power whether you are pushing hard on the circuit or riding in unpredictable road conditions.

Key Features

• Manufactured in Italy from certified materials — every disc meets the quality and safety standards demanded by professional motorsport programmes including MotoGP and WSBK.
• 6.0 mm disc thickness engineered for extreme braking loads — verify caliper clearance before fitting, as this specification exceeds standard OEM thickness.
• Angled drillings across the friction ring distribute heat up to 20% more efficiently than solid designs, eliminating hot spots and dramatically reducing brake fade.
• Reduced rotating mass compared to solid equivalents improves chassis agility, sharpens steering response and gives the rider more precise control over corner entry.
• Extended brake pad life: the optimised drilling pattern cleans pad surfaces continuously, preserving consistent bite over far greater mileage — on road or track.
• Choice of inner carrier colour — hard-anodised, black, red or blue — allows personalisation without compromising structural integrity. Note: red and blue variants may carry extended lead times.

Race-Proven Safety You Can Measure

The SBK 6.0 designation is not a marketing label — it reflects the disc geometry specification used in top-level Superbike competition. TK Dischi Freno sources only certified materials from approved Italian suppliers, and each disc undergoes dimensional and metallurgical verification before leaving the factory. The result is uniform, progressive braking behaviour with reduced lever effort, meaning the rider retains confident feedback even in wet or mixed conditions where brake modulation matters most.

Build Quality and Materials

The two-piece floating construction pairs a stainless steel friction ring with a hard-anodised aluminium inner carrier. Anodising protects the carrier against corrosion and heat cycles while keeping unsprung and rotating mass to a minimum. The 30 mm friction ring width and 320 mm rotor diameter (with an optional 330 mm upgrade available) are matched precisely to the GSX-R 1000 front fork and caliper architecture of the 2017–2023 generation, ensuring full OEM-grade fitment with no modification required.

Fitment and Compatibility

This kit is designed exclusively for the Suzuki GSX-R 1000 across the following model years:

• Suzuki GSX-R 1000 — 2017, 2018, 2019, 2020, 2021, 2022, 2023

Important: the 6.0 mm disc thickness may not be compatible with all aftermarket brake calipers. Confirm caliper piston-to-disc clearance before installation. Consult TK Dischi Freno or your workshop if in doubt.

Part Numbers by Finish

• Hard-anodised: S05EL_S05ER_SBK6_ha
• Black: S05EL_S05ER_SBK6_b
• Red: S05EL_S05ER_SBK6_r
• Blue: S05EL_S05ER_SBK6_bl

Specifications