{"product_id":"ohlins-shock-spring-62-n-mm-255-mm-61-mm-06310-15","title":"Öhlins Shock Spring 62 N\/mm \/ 255 mm \/ Ø 61 mm – 06310-15","description":"\u003cp\u003eÖhlins part number 06310-15 is a shock absorber spring rated at 62 N\/mm, 255 mm long with a 61 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter 61 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 62 N\/mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 255 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06310-15\u003c\/li\u003e\n\u003cli\u003e140 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eEvery unit is dyno-tested against the curve held for its part number, not sampled from a batch. Machining, anodising, assembly and testing all happen in the same building rather than across a supply chain. Seals are specified for temperature stability rather than for the lowest unit cost.\u003c\/p\u003e\u003ch2\u003eThe Numbers That Matter\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 255 mm and the inner diameter at 61 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eSupport under braking improves; small-bump comfort gives a little back. Firm rates trade some small-bump comfort for support — the right trade on a good surface at speed. If the suspension bottoms out or the geometry collapses under load, this is the direction to go. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003ePreload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. Öhlins sells rear springs separately precisely because rider weight varies more than machine weight does. A shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAsk us with the machine and rider weight and we will tell you which rate in this size to take. This is a service part in the proper sense — it wears, it settles, and replacing it restores what the suspension was designed to do. A spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eA spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag. Note the original oil level before draining — it is a useful reference even when Öhlins specifies its own. Preload spacers usually need shortening or lengthening so the installed length stays correct.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins components deliver what they promise once they are fitted and set up properly. As an authorised Öhlins service centre we do exactly that in house — installation, service and setup. Simply ask if you would like us to take care of it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06310-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 62 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 255 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 61 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 140 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645361873162,"sku":"06310-15","price":97.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_5f04aabb-b0b8-4d21-9b24-ca2b4ec3d816.png?v=1788866766","url":"https:\/\/inter-pace.com\/en-it\/products\/ohlins-shock-spring-62-n-mm-255-mm-61-mm-06310-15","provider":"Inter-Pace","version":"1.0","type":"link"}