{"title":"Suspension adjusters \u0026 preload","description":null,"products":[{"product_id":"ohlins-adjustment-ring-36-00415-01","title":"Öhlins Adjustment ring 36 – 00415-01","description":"\u003cp\u003eAdjustment ring 36, Öhlins part number 00415-01. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00415-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. Öhlins keeps service parts available for units long after they leave the current price list. If you are between two sizes, send us the measurement and we will check it against the catalogue. Order by part number — descriptions repeat across sizes, numbers do not.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00415-01. Öhlins does not publish a dimension here — go by the number and the exploded view. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00415-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjusters\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53646896267530,"sku":"00415-01","price":10.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00415-01_3fe7dd27-c12b-483e-9e96-a8b2994dee64.png?v=1788869309"},{"product_id":"ohlins-cam-adjuster-36-silver-00416-04","title":"Öhlins Cam adjuster 36 silver – 00416-04","description":"\u003cp\u003eCam adjuster 36 silver, Öhlins part number 00416-04. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00416-04\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. Detent balls and springs are separate parts because they wear before the housing does. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eThe part number is the contract: it defines material, dimension and finish together. A damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. If you are between two sizes, send us the measurement and we will check it against the catalogue. We can check the number against the Öhlins exploded view before you order — just ask.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eOrder under 00416-04. Where several sizes share a description, only the number separates them. This position has no published dimension, so the part number is the only reliable identifier. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00416-04\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjusters\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53646896398602,"sku":"00416-04","price":15.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00416-04_822c3257-29c9-4b4d-9f20-5866f3fa79df.png?v=1788869311"},{"product_id":"ohlins-adjuster-shaft-258-3-4-3-00566-02","title":"Öhlins Adjuster shaft 258.3\/4.3 – 00566-02","description":"\u003cp\u003eAdjuster shaft 258.3\/4.3, Öhlins part number 00566-02. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-02\u003c\/li\u003e\n\u003cli\u003eDimension A 258.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins publishes 258.3 mm, 4.3 mm for 00566-02 — the dimensions are the identity of the part. A preload adjuster carries the full spring load and is built as a structural part. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. The alternative to a service part is usually a new damper, which is why this catalogue exists. Tell us the damper's model designation and year and we will match the number for you. Send us the model and serial number of your unit and we will confirm the position before you order.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003ePart number 00566-02 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. The published dimensions are dimension a 258.3 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. Compression and rebound adjusters are not interchangeable even when they look similar. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 258.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647142912266,"sku":"00566-02","price":8.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-02_80918fd5-a971-4147-8180-3c4ba48ca70a.png?v=1788869697"},{"product_id":"ohlins-adjuster-shaft-237-5-4-3-00566-05","title":"Öhlins Adjuster shaft 237.5\/4.3 – 00566-05","description":"\u003cp\u003eAdjuster shaft 237.5\/4.3, Öhlins part number 00566-05. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 237.5 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-05\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins publishes 237.5 mm, 4.3 mm for 00566-05 — the dimensions are the identity of the part. Hydraulic preload adjusters are sealed units and are replaced rather than opened. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. Öhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. Send us the model and serial number of your unit and we will confirm the position before you order. Öhlins numbers do not follow a logic you can guess — always read them from the documentation.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00566-05. dimension a 237.5 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. Preload adjusters carry the full spring force and are built accordingly. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eA damper rebuild is workshop work: it needs the unit dismantled, the shim stack rebuilt in the correct order and the gas charge reset. We are an authorised Öhlins service centre and do exactly that in house — send us the unit or ask us to fit the part with your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-05\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 237.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647148941578,"sku":"00566-05","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-05_f95f6681-a1e7-4464-a1e3-09e2b036deda.png?v=1788869700"},{"product_id":"ohlins-adjuster-shaft-164-8-4-3-00566-07","title":"Öhlins Adjuster shaft 164.8\/4.3 – 00566-07","description":"\u003cp\u003eAdjuster shaft 164.8\/4.3, Öhlins part number 00566-07. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 164.8 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-07\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 164.8 mm, 4.3 mm; nothing about that is approximate. A bent adjuster shaft binds and the clicks become uneven. Detent balls and springs are separate parts because they wear before the housing does. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eAn original part keeps the unit within its published specification; a near-equivalent quietly moves it. A damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Order by part number. The dimensions below are the ones Öhlins publishes for it. The exploded drawing for your unit names the number; if you do not have it, we do.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003ePart number 00566-07 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Check dimension a 164.8 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. Compression and rebound adjusters are not interchangeable even when they look similar. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 164.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647149072650,"sku":"00566-07","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-07_89884c2e-a294-4f1b-8dea-ac4bf65c246b.png?v=1788869702"},{"product_id":"ohlins-adjuster-shaft-145-5-4-3-00566-09","title":"Öhlins Adjuster shaft 145.5\/4.3 – 00566-09","description":"\u003cp\u003eAdjuster shaft 145.5\/4.3, Öhlins part number 00566-09. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-09\u003c\/li\u003e\n\u003cli\u003eDimension A 145.5 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eAt 145.5 mm, 4.3 mm it fits one position only; the next size up carries a different number. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Öhlins is one of the few suspension makers that still supplies every position in the exploded view as a single part. Where a number has been superseded, Öhlins states the replacement — we pass that on. For a full rebuild, the seal kit plus the wear parts is usually the sensible order.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003ePart number 00566-09 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Öhlins states dimension a 145.5 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-09\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 145.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647162278154,"sku":"00566-09","price":6.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-09_b9ac8f24-e695-4e0e-b1aa-71d51d717e53.png?v=1788869706"},{"product_id":"ohlins-adjuster-shaft-192-3-4-3-00566-13","title":"Öhlins Adjuster shaft 192.3\/4.3 – 00566-13","description":"\u003cp\u003eAdjuster shaft 192.3\/4.3, Öhlins part number 00566-13. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-13\u003c\/li\u003e\n\u003cli\u003eDimension A 192.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eÖhlins publishes 192.3 mm, 4.3 mm for 00566-13 — the dimensions are the identity of the part. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Preload adjusters carry the full spring force and are built accordingly. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. This is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. For a full rebuild, the seal kit plus the wear parts is usually the sensible order. Order by part number — descriptions repeat across sizes, numbers do not.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eOrder under 00566-13. Where several sizes share a description, only the number separates them. Öhlins states dimension a 192.3 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 192.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647162933514,"sku":"00566-13","price":9.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-13_1391bc8f-7a8d-4d16-84fd-b8207cd46b67.png?v=1788869708"},{"product_id":"ohlins-adjuster-shaft-187-8-4-3-00566-16","title":"Öhlins Adjuster shaft 187.8\/4.3 – 00566-16","description":"\u003cp\u003eAdjuster shaft 187.8\/4.3, Öhlins part number 00566-16. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 187.8 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-16\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 187.8 mm, 4.3 mm; nothing about that is approximate. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. The alternative to a service part is usually a new damper, which is why this catalogue exists. We can check the number against the Öhlins exploded view before you order — just ask. If you are between two sizes, send us the measurement and we will check it against the catalogue.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003ePart number 00566-16 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Check dimension a 187.8 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. A preload adjuster carries the full spring load and is built as a structural part. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-16\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 187.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647163228426,"sku":"00566-16","price":8.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-16_8dddc9ba-3d2d-449d-928b-74fd278eaca8.png?v=1788869710"},{"product_id":"ohlins-adjuster-shaft-97-5-4-3-00566-18","title":"Öhlins Adjuster shaft 97.5\/4.3 – 00566-18","description":"\u003cp\u003eAdjuster shaft 97.5\/4.3, Öhlins part number 00566-18. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 97.5 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-18\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003e00566-18 is the 97.5 mm, 4.3 mm version — Öhlins lists each size separately. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. A bent adjuster shaft binds and the clicks become uneven. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eAn original part keeps the unit within its published specification; a near-equivalent quietly moves it. This is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. Service parts are ordered per piece unless stated otherwise. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003ePart number 00566-18 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. dimension a 97.5 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. Compression and rebound adjusters are not interchangeable even when they look similar. A bent adjuster shaft binds and the clicks become uneven.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 97.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647176958218,"sku":"00566-18","price":7.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-18_393460b0-5480-417c-a764-43cc09e489f4.png?v=1788869713"},{"product_id":"ohlins-adjuster-shaft-152-4-3-00566-21","title":"Öhlins Adjuster shaft 152\/4.3 – 00566-21","description":"\u003cp\u003eAdjuster shaft 152\/4.3, Öhlins part number 00566-21. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 152 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-21\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003e00566-21 is the 152 mm, 4.3 mm version — Öhlins lists each size separately. A preload adjuster carries the full spring load and is built as a structural part. Hydraulic preload adjusters are sealed units and are replaced rather than opened. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins publishes dimensions for its service parts so a workshop can verify before it fits. A damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. The Öhlins exploded view names the number for each position; we can look it up if you do not have it. Order by part number. The dimensions below are the ones Öhlins publishes for it.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003ePart number 00566-21 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Öhlins states dimension a 152 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Its length matches the shaft it runs in, which is why the numbers are paired. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-21\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647178236170,"sku":"00566-21","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-21_bdb228a4-e930-4921-bf67-fbd15b9c3292.png?v=1788869716"},{"product_id":"ohlins-adjuster-shaft-123-5-4-3-00566-23","title":"Öhlins Adjuster shaft 123.5\/4.3 – 00566-23","description":"\u003cp\u003eAdjuster shaft 123.5\/4.3, Öhlins part number 00566-23. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-23\u003c\/li\u003e\n\u003cli\u003eDimension A 123.5 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 123.5 mm, 4.3 mm; nothing about that is approximate. Compression and rebound adjusters are not interchangeable even when they look similar. Preload adjusters carry the full spring force and are built accordingly. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eEvery part in this catalogue is one Öhlins fits itself during assembly and service. The tolerances here are the ones the unit was assembled to, not a pattern equivalent's interpretation of them. For a full rebuild, the seal kit plus the wear parts is usually the sensible order. We can supply the whole position from the drawing rather than the single piece if that is easier.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-23 in this case. Öhlins states dimension a 123.5 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Preload adjusters carry the full spring force and are built accordingly. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-23\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 123.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647178727690,"sku":"00566-23","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-23_5dec9f9a-197a-46f4-92f1-bfb71dc3ec2c.png?v=1788869719"},{"product_id":"ohlins-adjuster-shaft-173-3-4-3-00566-27","title":"Öhlins Adjuster shaft 173.3\/4.3 – 00566-27","description":"\u003cp\u003eAdjuster shaft 173.3\/4.3, Öhlins part number 00566-27. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 173.3 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-27\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThis one measures 173.3 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. A preload adjuster carries the full spring load and is built as a structural part. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eParts remain available years after a unit leaves the current price list, which is unusual in this trade. Öhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. Öhlins parts are unit-specific: a close dimension is not a substitute. If the unit is already apart, compare the published dimensions with the part in your hand.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-27 in this case. dimension a 173.3 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-27\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 173.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647192686858,"sku":"00566-27","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-27_61ea46db-c523-406f-906e-11d94a7a10b1.png?v=1788869721"},{"product_id":"ohlins-adjuster-shaft-96-2-4-3-00566-29","title":"Öhlins Adjuster shaft 96.2\/4.3 – 00566-29","description":"\u003cp\u003eAdjuster shaft 96.2\/4.3, Öhlins part number 00566-29. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-29\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 96.2 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003e00566-29 is the 96.2 mm, 4.3 mm version — Öhlins lists each size separately. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Detent balls and springs are separate parts because they wear before the housing does. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eParts remain available years after a unit leaves the current price list, which is unusual in this trade. Öhlins manufactures service parts on the same lines as production parts — there is no second quality. Service parts are ordered per piece unless stated otherwise. Order by part number — descriptions repeat across sizes, numbers do not.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00566-29. The published dimensions are dimension a 96.2 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. Detent balls and springs are separate parts because they wear before the housing does. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-29\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 96.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647193309450,"sku":"00566-29","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-29_22e7be06-99f5-4db4-a340-243e4bda80da.png?v=1788869724"},{"product_id":"ohlins-adjuster-shaft-176-4-3-00566-31","title":"Öhlins Adjuster shaft 176\/4.3 – 00566-31","description":"\u003cp\u003eAdjuster shaft 176\/4.3, Öhlins part number 00566-31. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 176 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-31\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThis one measures 176 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. The part number is the contract: it defines material, dimension and finish together. Order by part number — descriptions repeat across sizes, numbers do not. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-31 in the exploded view for the unit it belongs to. The published dimensions are dimension a 176 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-31\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 176 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647193899274,"sku":"00566-31","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-31_8dd083df-d720-4311-acde-65375d45aa4e.png?v=1788869727"},{"product_id":"ohlins-adjuster-shaft-108-6-4-3-00566-35","title":"Öhlins Adjuster shaft 108.6\/4.3 – 00566-35","description":"\u003cp\u003eAdjuster shaft 108.6\/4.3, Öhlins part number 00566-35. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eDimension A 108.6 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-35\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThe published figures are 108.6 mm, 4.3 mm. Measure the old part against them before ordering. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. Detent balls and springs are separate parts because they wear before the housing does. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Öhlins manufactures service parts on the same lines as production parts — there is no second quality. If you are between two sizes, send us the measurement and we will check it against the catalogue. Where a number has been superseded, Öhlins states the replacement — we pass that on.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00566-35. Check dimension a 108.6 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-35\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 108.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647195209994,"sku":"00566-35","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-35_ec679c2d-5b96-435e-8c5f-2869b780e34d.png?v=1788869729"},{"product_id":"ohlins-adjuster-shaft-166-5-4-3-00566-37","title":"Öhlins Adjuster shaft 166.5\/4.3 – 00566-37","description":"\u003cp\u003eAdjuster shaft 166.5\/4.3, Öhlins part number 00566-37. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-37\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 166.5 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eDimensionally this is 166.5 mm, 4.3 mm, which is how it is told apart from the rest of the range. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eThe part is identical to what Öhlins fits in production — same supplier, same specification. An original part keeps the unit within its published specification; a near-equivalent quietly moves it. Service parts are supplied per piece unless the description says otherwise. We can supply the whole position from the drawing rather than the single piece if that is easier.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eOrder under 00566-37. Where several sizes share a description, only the number separates them. dimension a 166.5 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. Preload adjusters carry the full spring force and are built accordingly. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eA damper rebuild is workshop work: it needs the unit dismantled, the shim stack rebuilt in the correct order and the gas charge reset. We are an authorised Öhlins service centre and do exactly that in house — send us the unit or ask us to fit the part with your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-37\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 166.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647209398538,"sku":"00566-37","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-37_7d011bb4-1524-4f84-af6a-c350bbf5b402.png?v=1788869731"},{"product_id":"ohlins-adjuster-shaft-100-6-4-3-00566-41","title":"Öhlins Adjuster shaft 100.6\/4.3 – 00566-41","description":"\u003cp\u003eAdjuster shaft 100.6\/4.3, Öhlins part number 00566-41. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-41\u003c\/li\u003e\n\u003cli\u003eDimension A 100.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003e00566-41 is the 100.6 mm, 4.3 mm version — Öhlins lists each size separately. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. Suspension is one of the few areas where the original part is genuinely the cheaper decision. Öhlins numbers do not follow a logic you can guess — always read them from the documentation. Where a number has been superseded, Öhlins states the replacement — we pass that on.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-41 in the exploded view for the unit it belongs to. Öhlins states dimension a 100.6 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Compression and rebound adjusters are not interchangeable even when they look similar. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-41\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 100.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647210807562,"sku":"00566-41","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-41_1ba2ff93-2960-4487-9cc4-bd753dde670b.png?v=1788869734"},{"product_id":"ohlins-adjuster-shaft-142-3-4-3-00566-44","title":"Öhlins Adjuster shaft 142.3\/4.3 – 00566-44","description":"\u003cp\u003eAdjuster shaft 142.3\/4.3, Öhlins part number 00566-44. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 142.3 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-44\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eAt 142.3 mm, 4.3 mm it fits one position only; the next size up carries a different number. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Every part in this catalogue is one Öhlins fits itself during assembly and service. If you are unsure which number your unit takes, send us the model and serial number of the damper and we will look it up. Ask us before ordering if you are unsure: a wrong part in a pressurised unit is an expensive lesson.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-44 in this case. The published dimensions are dimension a 142.3 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. A bent adjuster shaft binds and the clicks become uneven. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-44\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 142.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647211528458,"sku":"00566-44","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-44_9e42c327-0b9f-4266-bfd4-7ab54c4d4327.png?v=1788869737"},{"product_id":"ohlins-adjuster-shaft-136-0-4-3-00566-47","title":"Öhlins Adjuster shaft 136.0\/4.3 – 00566-47","description":"\u003cp\u003eAdjuster shaft 136.0\/4.3, Öhlins part number 00566-47. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-47\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 136.0 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eDimensionally this is 136.0 mm, 4.3 mm, which is how it is told apart from the rest of the range. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eÖhlins numbers every position so a workshop can order precisely what it needs, not a whole assembly. The part is identical to what Öhlins fits in production — same supplier, same specification. If you are between two sizes, send us the measurement and we will check it against the catalogue. We can supply the whole position from the drawing rather than the single piece if that is easier.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-47 in this case. dimension a 136.0 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eA damper rebuild is workshop work: it needs the unit dismantled, the shim stack rebuilt in the correct order and the gas charge reset. We are an authorised Öhlins service centre and do exactly that in house — send us the unit or ask us to fit the part with your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-47\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 136.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647225684234,"sku":"00566-47","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-47_ee88d5cb-5654-4834-9685-4a6d429c408a.png?v=1788869740"},{"product_id":"ohlins-adjuster-shaft-250-5-4-3-00566-51","title":"Öhlins Adjuster shaft 250.5\/4.3 – 00566-51","description":"\u003cp\u003eAdjuster shaft 250.5\/4.3, Öhlins part number 00566-51. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 250.5 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-51\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThis one measures 250.5 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. Hydraulic preload adjusters are sealed units and are replaced rather than opened. A preload adjuster carries the full spring load and is built as a structural part. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eThe alternative to a service part is usually a new damper, which is why this catalogue exists. Öhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. Send us the model and serial number of your unit and we will confirm the position before you order. Order by part number. The dimensions below are the ones Öhlins publishes for it.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-51 in this case. Öhlins states dimension a 250.5 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-51\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 250.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647226929418,"sku":"00566-51","price":6.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-51_628fe2d5-704e-4842-9d83-33ba61be3a2f.png?v=1788869743"},{"product_id":"ohlins-adjuster-shaft-138-5-4-3-00566-53","title":"Öhlins Adjuster shaft 138.5\/4.3 – 00566-53","description":"\u003cp\u003eAdjuster shaft 138.5\/4.3, Öhlins part number 00566-53. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-53\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 138.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 138.5 mm, 4.3 mm; nothing about that is approximate. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. Detent balls and springs are separate parts because they wear before the housing does. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Öhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. Tell us the damper's model designation and year and we will match the number for you. If you are between two sizes, send us the measurement and we will check it against the catalogue.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003e00566-53 is the Öhlins number for this position — the same one printed in the service documentation. The published dimensions are dimension a 138.5 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. A preload adjuster carries the full spring load and is built as a structural part. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-53\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 138.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647227945226,"sku":"00566-53","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-53_5644d820-ecab-48bc-8186-7584652ba2f8.png?v=1788869745"},{"product_id":"ohlins-adjuster-shaft-208-6-4-3-00566-55","title":"Öhlins Adjuster shaft 208.6\/4.3 – 00566-55","description":"\u003cp\u003eAdjuster shaft 208.6\/4.3, Öhlins part number 00566-55. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-55\u003c\/li\u003e\n\u003cli\u003eDimension A 208.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003e00566-55 is the 208.6 mm, 4.3 mm version — Öhlins lists each size separately. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eBuying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. Öhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Order by part number. The dimensions below are the ones Öhlins publishes for it. If you are unsure which number your unit takes, send us the model and serial number of the damper and we will look it up.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-55 in this case. Check dimension a 208.6 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-55\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 208.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647234793738,"sku":"00566-55","price":8.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-55_96ec0cb0-25b8-4af5-8869-83d31574b271.png?v=1788869748"},{"product_id":"ohlins-adjuster-shaft-219-6-4-3-00566-57","title":"Öhlins Adjuster shaft 219.6\/4.3 – 00566-57","description":"\u003cp\u003eAdjuster shaft 219.6\/4.3, Öhlins part number 00566-57. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-57\u003c\/li\u003e\n\u003cli\u003eDimension A 219.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003e00566-57 is the 219.6 mm, 4.3 mm version — Öhlins lists each size separately. Detent balls and springs are separate parts because they wear before the housing does. Its length matches the shaft it runs in, which is why the numbers are paired. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eÖhlins keeps service parts available for units long after they leave the current price list. The tolerances here are the ones the unit was assembled to, not a pattern equivalent's interpretation of them. The exploded drawing for your unit names the number; if you do not have it, we do. If you are unsure which number your unit takes, send us the model and serial number of the damper and we will look it up.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003ePart number 00566-57 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Check dimension a 219.6 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. Preload adjusters carry the full spring force and are built accordingly. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-57\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 219.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647239119114,"sku":"00566-57","price":8.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-57_93ab62d1-9da0-4fda-a878-387b7034008a.png?v=1788869751"},{"product_id":"ohlins-adjuster-shaft-113-6-4-3-00566-59","title":"Öhlins Adjuster shaft 113.6\/4.3 – 00566-59","description":"\u003cp\u003eAdjuster shaft 113.6\/4.3, Öhlins part number 00566-59. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-59\u003c\/li\u003e\n\u003cli\u003eDimension A 113.6 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 113.6 mm, 4.3 mm; nothing about that is approximate. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Buying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. Öhlins numbers do not follow a logic you can guess — always read them from the documentation. Service parts are ordered per piece unless stated otherwise.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-59 in this case. dimension a 113.6 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. A preload adjuster carries the full spring load and is built as a structural part. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eWe are an authorised Öhlins service centre, so you do not have to source the tools and the nitrogen: send us the damper and we rebuild it with the correct parts and the correct setting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-59\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 113.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647239971082,"sku":"00566-59","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-59_3739fbe9-739c-497d-9463-432af75d521e.png?v=1788869754"},{"product_id":"ohlins-adjuster-shaft-131-6-4-3-00566-61","title":"Öhlins Adjuster shaft 131.6\/4.3 – 00566-61","description":"\u003cp\u003eAdjuster shaft 131.6\/4.3, Öhlins part number 00566-61. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 131.6 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-61\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThe published figures are 131.6 mm, 4.3 mm. Measure the old part against them before ordering. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. Hydraulic preload adjusters are sealed units and are replaced rather than opened. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. Öhlins is one of the few suspension makers that still supplies every position in the exploded view as a single part. The Öhlins exploded view names the number for each position; we can look it up if you do not have it. Order by part number — descriptions repeat across sizes, numbers do not.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003e00566-61 is the Öhlins number for this position — the same one printed in the service documentation. dimension a 131.6 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. Compression and rebound adjusters are not interchangeable even when they look similar. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-61\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 131.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647253373194,"sku":"00566-61","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-61_efbe23b8-f4bd-462d-ad21-6d3bd70ec51e.png?v=1788869756"},{"product_id":"ohlins-adjuster-shaft-92-8-4-3-00566-63","title":"Öhlins Adjuster shaft 92.8\/4.3 – 00566-63","description":"\u003cp\u003eAdjuster shaft 92.8\/4.3, Öhlins part number 00566-63. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-63\u003c\/li\u003e\n\u003cli\u003eDimension A 92.8 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eDimensionally this is 92.8 mm, 4.3 mm, which is how it is told apart from the rest of the range. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. This is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. Öhlins parts are unit-specific: a close dimension is not a substitute. For a full rebuild, the seal kit plus the wear parts is usually the sensible order.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003e00566-63 is the Öhlins number for this position — the same one printed in the service documentation. dimension a 92.8 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. Hydraulic preload adjusters are sealed units and are replaced rather than opened. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-63\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 92.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647254356234,"sku":"00566-63","price":7.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-63_bf0342a8-2d46-4cbf-9870-6ae4db01193b.png?v=1788869759"},{"product_id":"ohlins-adjuster-shaft-83-6-4-3-00566-66","title":"Öhlins Adjuster shaft 83.6\/4.3 – 00566-66","description":"\u003cp\u003eAdjuster shaft 83.6\/4.3, Öhlins part number 00566-66. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-66\u003c\/li\u003e\n\u003cli\u003eDimension A 83.6 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThe published figures are 83.6 mm, 4.3 mm. Measure the old part against them before ordering. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eSuspension is one of the few areas where the original part is genuinely the cheaper decision. Öhlins keeps service parts available for units long after they leave the current price list. Service parts are ordered per piece unless stated otherwise. The Öhlins exploded view names the number for each position; we can look it up if you do not have it.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003e00566-66 is the Öhlins number for this position — the same one printed in the service documentation. The published dimensions are dimension a 83.6 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-66\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 83.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647255077130,"sku":"00566-66","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-66_2a62a054-c61a-4bce-b71e-0dea33893425.png?v=1788869761"},{"product_id":"ohlins-adjuster-shaft-209-6-4-3-00566-68","title":"Öhlins Adjuster shaft 209.6\/4.3 – 00566-68","description":"\u003cp\u003eAdjuster shaft 209.6\/4.3, Öhlins part number 00566-68. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00566-68\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 209.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins publishes 209.6 mm, 4.3 mm for 00566-68 — the dimensions are the identity of the part. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics. A bent adjuster shaft binds and the clicks become uneven.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eThe tolerances here are the ones the unit was assembled to, not a pattern equivalent's interpretation of them. An original part keeps the unit within its published specification; a near-equivalent quietly moves it. Order by part number — descriptions repeat across sizes, numbers do not. Send us the model and serial number of your unit and we will confirm the position before you order.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eOrder under 00566-68. Where several sizes share a description, only the number separates them. Öhlins states dimension a 209.6 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-68\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 209.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647269134602,"sku":"00566-68","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-68_f91166c2-8d39-4b7f-8470-deff31bf9b99.png?v=1788869764"},{"product_id":"ohlins-adjuster-shaft-204-6-4-3-00566-70","title":"Öhlins Adjuster shaft 204.6\/4.3 – 00566-70","description":"\u003cp\u003eAdjuster shaft 204.6\/4.3, Öhlins part number 00566-70. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 204.6 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-70\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eDimensionally this is 204.6 mm, 4.3 mm, which is how it is told apart from the rest of the range. Detent balls and springs are separate parts because they wear before the housing does. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. The part number is the contract: it defines material, dimension and finish together. We can check the number against the Öhlins exploded view before you order — just ask. Order by part number. The dimensions below are the ones Öhlins publishes for it.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003ePart number 00566-70 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. The published dimensions are dimension a 204.6 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. Its length matches the shaft it runs in, which is why the numbers are paired. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eA damper rebuild is workshop work: it needs the unit dismantled, the shim stack rebuilt in the correct order and the gas charge reset. We are an authorised Öhlins service centre and do exactly that in house — send us the unit or ask us to fit the part with your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-70\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 204.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647270379786,"sku":"00566-70","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-70_13abc1a1-5a4b-4a53-9b2c-e7894c6af89f.png?v=1788869767"},{"product_id":"ohlins-adjuster-shaft-281-1-4-3-00566-72","title":"Öhlins Adjuster shaft 281.1\/4.3 – 00566-72","description":"\u003cp\u003eAdjuster shaft 281.1\/4.3, Öhlins part number 00566-72. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-72\u003c\/li\u003e\n\u003cli\u003eDimension A 281.1 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThis one measures 281.1 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. Compression and rebound adjusters are not interchangeable even when they look similar. A bent adjuster shaft binds and the clicks become uneven.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eParts remain available years after a unit leaves the current price list, which is unusual in this trade. This is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. Send us the model and serial number of your unit and we will confirm the position before you order. For a full rebuild, the seal kit plus the wear parts is usually the sensible order.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00566-72. Check dimension a 281.1 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. Preload adjusters carry the full spring force and are built accordingly. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eA damper rebuild is workshop work: it needs the unit dismantled, the shim stack rebuilt in the correct order and the gas charge reset. We are an authorised Öhlins service centre and do exactly that in house — send us the unit or ask us to fit the part with your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-72\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 281.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647271461130,"sku":"00566-72","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-72_303b5f46-fb9a-4a2f-9719-6d231235c150.png?v=1788869769"},{"product_id":"ohlins-adjuster-shaft-117-6-4-3-00566-75","title":"Öhlins Adjuster shaft 117.6\/4.3 – 00566-75","description":"\u003cp\u003eAdjuster shaft 117.6\/4.3, Öhlins part number 00566-75. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-75\u003c\/li\u003e\n\u003cli\u003eDimension A 117.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eThe published figures are 117.6 mm, 4.3 mm. Measure the old part against them before ordering. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit. Detent balls and springs are separate parts because they wear before the housing does. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eSuspension is one of the few areas where the original part is genuinely the cheaper decision. The alternative to a service part is usually a new damper, which is why this catalogue exists. Order by part number — descriptions repeat across sizes, numbers do not. Service parts are supplied per piece unless the description says otherwise.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-75 in the exploded view for the unit it belongs to. The published dimensions are dimension a 117.6 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-75\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 117.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647273132298,"sku":"00566-75","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-75_c0f05840-81e0-46f7-a649-8d13b49989c2.png?v=1788869772"},{"product_id":"ohlins-adjuster-shaft-287-0-4-3-00566-78","title":"Öhlins Adjuster shaft 287.0\/4.3 – 00566-78","description":"\u003cp\u003eAdjuster shaft 287.0\/4.3, Öhlins part number 00566-78. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 287.0 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-78\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eAt 287.0 mm, 4.3 mm it fits one position only; the next size up carries a different number. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins is one of the few suspension makers that still supplies every position in the exploded view as a single part. The tolerances here are the ones the unit was assembled to, not a pattern equivalent's interpretation of them. If you are unsure which number your unit takes, send us the model and serial number of the damper and we will look it up. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003ePart number 00566-78 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. dimension a 287.0 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-78\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 287.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647274311946,"sku":"00566-78","price":8.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-78_519a37a2-dfb6-4a45-8337-f3cc0fe44404.png?v=1788869774"},{"product_id":"ohlins-adjuster-shaft-163-6-4-3-00566-80","title":"Öhlins Adjuster shaft 163.6\/4.3 – 00566-80","description":"\u003cp\u003eAdjuster shaft 163.6\/4.3, Öhlins part number 00566-80. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension A 163.6 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-80\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eThe published figures are 163.6 mm, 4.3 mm. Measure the old part against them before ordering. A bent adjuster shaft binds and the clicks become uneven. Hydraulic preload adjusters are sealed units and are replaced rather than opened. Its length matches the shaft it runs in, which is why the numbers are paired.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins keeps service parts available for units long after they leave the current price list. The tolerances here are the ones the unit was assembled to, not a pattern equivalent's interpretation of them. Ask us before ordering if you are unsure: a wrong part in a pressurised unit is an expensive lesson. If you are between two sizes, send us the measurement and we will check it against the catalogue.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-80 in the exploded view for the unit it belongs to. Check dimension a 163.6 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. Compression and rebound adjusters are not interchangeable even when they look similar. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-80\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 163.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647282798858,"sku":"00566-80","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-80_27b6ae00-477d-4fb7-a4a4-77ce536064bf.png?v=1788869777"},{"product_id":"ohlins-adjuster-shaft-143-6-4-3-00566-82","title":"Öhlins Adjuster shaft 143.6\/4.3 – 00566-82","description":"\u003cp\u003eAdjuster shaft 143.6\/4.3, Öhlins part number 00566-82. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-82\u003c\/li\u003e\n\u003cli\u003eDimension A 143.6 mm\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eThe published figures are 143.6 mm, 4.3 mm. Measure the old part against them before ordering. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it. Compression and rebound adjusters are not interchangeable even when they look similar. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eÖhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. The part is identical to what Öhlins fits in production — same supplier, same specification. Öhlins numbers do not follow a logic you can guess — always read them from the documentation. Where a number has been superseded, Öhlins states the replacement — we pass that on.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eIf the unit is already open, compare the dimensions below with the part in your hand before ordering 00566-82. dimension a 143.6 mm, dimension b 4.3 mm is what distinguishes this number from its neighbours in the range. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-82\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 143.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647283945738,"sku":"00566-82","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-82_f68cbd3d-1051-43ed-a36d-23ea9c265fb7.png?v=1788869779"},{"product_id":"ohlins-adjuster-shaft-93-6-4-3-00566-84","title":"Öhlins Adjuster shaft 93.6\/4.3 – 00566-84","description":"\u003cp\u003eAdjuster shaft 93.6\/4.3, Öhlins part number 00566-84. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-84\u003c\/li\u003e\n\u003cli\u003eDimension A 93.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003e00566-84 is the 93.6 mm, 4.3 mm version — Öhlins lists each size separately. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. Öhlins manufactures service parts on the same lines as production parts — there is no second quality. Service parts are ordered per piece unless stated otherwise. Send us the model and serial number of your unit and we will confirm the position before you order.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-84 in the exploded view for the unit it belongs to. Öhlins states dimension a 93.6 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. A preload adjuster carries the full spring load and is built as a structural part. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-84\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 93.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647290925322,"sku":"00566-84","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-84_b9288649-cdb2-421b-85bb-94a6cd7e9e89.png?v=1788869782"},{"product_id":"ohlins-adjuster-shaft-289-0-4-3-00566-86","title":"Öhlins Adjuster shaft 289.0\/4.3 – 00566-86","description":"\u003cp\u003eAdjuster shaft 289.0\/4.3, Öhlins part number 00566-86. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-86\u003c\/li\u003e\n\u003cli\u003eDimension A 289.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eAt 289.0 mm, 4.3 mm it fits one position only; the next size up carries a different number. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston. A bent adjuster shaft binds and the clicks become uneven. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. Every part in this catalogue is one Öhlins fits itself during assembly and service. The Öhlins exploded view names the number for each position; we can look it up if you do not have it. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-86 in this case. Check dimension a 289.0 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. The needle tip is the wear part: once rounded, the first few clicks stop doing anything.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-86\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 289.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647292399882,"sku":"00566-86","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-86_e4f39fca-b128-45b9-b9b0-67a64a58cc07.png?v=1788869785"},{"product_id":"ohlins-adjuster-shaft-185-6-4-3-00566-88","title":"Öhlins Adjuster shaft 185.6\/4.3 – 00566-88","description":"\u003cp\u003eAdjuster shaft 185.6\/4.3, Öhlins part number 00566-88. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 185.6 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-88\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003e185.6 mm, 4.3 mm: that is the whole specification, and it has to match what came out. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. A preload adjuster carries the full spring load and is built as a structural part. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. Öhlins keeps service parts available for units long after they leave the current price list. Tell us the damper's model designation and year and we will match the number for you. If the unit is already apart, compare the published dimensions with the part in your hand.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-88 in the exploded view for the unit it belongs to. The published dimensions are dimension a 185.6 mm, dimension b 4.3 mm — measure the old part against them if you are unsure. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eWe are an authorised Öhlins service centre, so you do not have to source the tools and the nitrogen: send us the damper and we rebuild it with the correct parts and the correct setting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-88\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 185.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647297052938,"sku":"00566-88","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-88_e6cee6c3-7737-4f59-ac2f-495117adc3d5.png?v=1788869787"},{"product_id":"ohlins-adjuster-shaft-212-6-4-3-00566-91","title":"Öhlins Adjuster shaft 212.6\/4.3 – 00566-91","description":"\u003cp\u003eAdjuster shaft 212.6\/4.3, Öhlins part number 00566-91. The adjuster shaft runs inside the damper shaft and carries the adjustment to the piston.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-91\u003c\/li\u003e\n\u003cli\u003eDimension A 212.6 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThis one measures 212.6 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Preload adjusters carry the full spring force and are built accordingly. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eThe part number is the contract: it defines material, dimension and finish together. Öhlins numbers every position so a workshop can order precisely what it needs, not a whole assembly. Send us the model and serial number of your unit and we will confirm the position before you order. For a full rebuild, the seal kit plus the wear parts is usually the sensible order.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003ePart number 00566-91 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Öhlins states dimension a 212.6 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. A worn adjuster loses its clicks, and with them any chance of a methodical setup. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-91\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 212.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647310782730,"sku":"00566-91","price":8.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-91_c5c2ace2-c285-4614-9beb-361a8d5d2fb0.png?v=1788869790"},{"product_id":"ohlins-adjuster-shaft-88-6-4-3-00566-94","title":"Öhlins Adjuster shaft 88.6\/4.3 – 00566-94","description":"\u003cp\u003eAdjuster shaft 88.6\/4.3, Öhlins part number 00566-94. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-94\u003c\/li\u003e\n\u003cli\u003eDimension A 88.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003e88.6 mm, 4.3 mm: that is the whole specification, and it has to match what came out. Compression and rebound adjusters are not interchangeable even when they look similar. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eÖhlins is one of the few suspension makers that still supplies every position in the exploded view as a single part. Öhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. If you are between two sizes, send us the measurement and we will check it against the catalogue. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 00566-94 in this case. Check dimension a 88.6 mm, dimension b 4.3 mm against what you have removed; a close size is not the same part. A preload adjuster carries the full spring load and is built as a structural part. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-94\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 88.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647311307018,"sku":"00566-94","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-94_f4822143-efc7-4524-9532-12c7a95d4e33.png?v=1788869792"},{"product_id":"ohlins-adjuster-shaft-163-8-4-3-00566-97","title":"Öhlins Adjuster shaft 163.8\/4.3 – 00566-97","description":"\u003cp\u003eAdjuster shaft 163.8\/4.3, Öhlins part number 00566-97. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 4.3 mm\u003c\/li\u003e\n\u003cli\u003eDimension A 163.8 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00566-97\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThis one measures 163.8 mm, 4.3 mm, and those figures are what separate it from the neighbouring numbers. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eBuying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. A damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. If you are between two sizes, send us the measurement and we will check it against the catalogue. Send us the model and serial number of your unit and we will confirm the position before you order.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00566-97 in the exploded view for the unit it belongs to. Öhlins states dimension a 163.8 mm, dimension b 4.3 mm for this number, and those figures are the deciding ones. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00566-97\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjuster Shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 163.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647326642442,"sku":"00566-97","price":7.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00566-97_2431bc23-e885-40df-b6de-6366d1ee71a8.png?v=1788869799"},{"product_id":"ohlins-needle-26-comp-valve-00647-01","title":"Öhlins Needle 26 comp.valve – 00647-01","description":"\u003cp\u003eNeedle 26 comp.valve, Öhlins part number 00647-01. Compression and rebound adjusters are not interchangeable even when they look similar.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00647-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThere is no measurement to check here — the number and the exploded view identify it. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. Buying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. Öhlins parts are unit-specific: a close dimension is not a substitute. Order by part number. The dimensions below are the ones Öhlins publishes for it.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eÖhlins identifies this position by the number 00647-01 in the exploded view for the unit it belongs to. This position has no published dimension, so the part number is the only reliable identifier. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Öhlins publishes the click count for each unit, and a rebuilt adjuster should return it.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00647-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjustment Needles\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647814754570,"sku":"00647-01","price":21.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00647-01_abd423ec-d829-4e98-8339-048db7281f78.png?v=1788870131"},{"product_id":"ohlins-knob-compression-adjuster-00820-02","title":"Öhlins Knob compression adjuster – 00820-02","description":"\u003cp\u003eKnob compression adjuster, Öhlins part number 00820-02. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00820-02\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eThis position is identified by its number rather than by a dimension. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Buying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. Order by part number — descriptions repeat across sizes, numbers do not. Service parts are ordered per piece unless stated otherwise.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eOrder under 00820-02. Where several sizes share a description, only the number separates them. Öhlins does not publish a dimension here — go by the number and the exploded view. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00820-02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjusters\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53647865086218,"sku":"00820-02","price":4.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00820-02_dd5166df-530d-4031-8608-92ae2e1989bd.png?v=1788870176"},{"product_id":"ohlins-thrust-needle-bearing-axk0821-01023-01","title":"Öhlins Thrust needle bearing AXK0821 – 01023-01","description":"\u003cp\u003eThrust needle bearing AXK0821, Öhlins part number 01023-01. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 01023-01\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eThere is no measurement to check here — the number and the exploded view identify it. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Compression and rebound adjusters are not interchangeable even when they look similar. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins supports its suspension with individual service parts, which is why a fifteen-year-old damper can still be rebuilt to specification. The alternative to a service part is usually a new damper, which is why this catalogue exists. The exploded drawing for your unit names the number; if you do not have it, we do. Order by part number. The dimensions below are the ones Öhlins publishes for it.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003e01023-01 is the Öhlins number for this position — the same one printed in the service documentation. This position has no published dimension, so the part number is the only reliable identifier. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable. Needle and seat wear together — replacing one without the other rarely helps.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01023-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjustment Needles\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648072638730,"sku":"01023-01","price":8.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01023-01_b159c9f5-66a0-4ac4-b737-e12a4be3c025.png?v=1788870340"},{"product_id":"ohlins-adjustment-screw-12-54-5-01039-01","title":"Öhlins Adjustment screw 12\/54.5 – 01039-01","description":"\u003cp\u003eAdjustment screw 12\/54.5, Öhlins part number 01039-01. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDimension B 54.5 mm\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 12 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01039-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 12 mm, 54.5 mm; nothing about that is approximate. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eThis is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. A damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Service parts are ordered per piece unless stated otherwise. Order by part number — descriptions repeat across sizes, numbers do not.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 01039-01 in this case. Öhlins states dimension a 12 mm, dimension b 54.5 mm for this number, and those figures are the deciding ones. Öhlins specifies a defined number of clicks per adjuster so a setting is a number, not an impression. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting service parts means opening a pressurised unit. As an authorised Öhlins service centre we do that here, with the right tools and a dyno check afterwards — just ask.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01039-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjustment Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 54.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648169271562,"sku":"01039-01","price":51.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01039-01_f6c91bcf-8f4c-4aa8-801d-4904e479820f.png?v=1788870421"},{"product_id":"ohlins-adjustment-needle-dia-4-0x31-5-01055-03","title":"Öhlins Adjustment needle dia. 4.0x31,5 – 01055-03","description":"\u003cp\u003eAdjustment needle dia. 4.0x31,5, Öhlins part number 01055-03. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01055-03\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. A rounded tip means the first clicks stop doing anything. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eÖhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Öhlins numbers every position so a workshop can order precisely what it needs, not a whole assembly. Order by part number. The dimensions below are the ones Öhlins publishes for it. Service parts are ordered per piece unless stated otherwise.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003eThe reliable route is the exploded drawing: find the position, read the number, order it — 01055-03 in this case. Öhlins does not publish a dimension here — go by the number and the exploded view. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. The needle meters the bleed flow, and its taper shapes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01055-03\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjustment Needles\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648321511690,"sku":"01055-03","price":6.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01055-03_306db9b8-2469-4b99-ae35-edcfc625ec52.png?v=1788870568"},{"product_id":"ohlins-bracket-hydraulic-preload-adjust-01082-02","title":"Öhlins Bracket hydraulic preload adjust. – 01082-02","description":"\u003cp\u003eBracket hydraulic preload adjust., Öhlins part number 01082-02. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01082-02\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. Detent balls and springs are separate parts because they wear before the housing does. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eParts remain available years after a unit leaves the current price list, which is unusual in this trade. Buying the individual part rather than a complete assembly is what makes servicing an Öhlins unit worthwhile. Öhlins numbers do not follow a logic you can guess — always read them from the documentation. Service parts are ordered per piece unless stated otherwise.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003e01082-02 is the Öhlins number for this position — the same one printed in the service documentation. Öhlins does not publish a dimension here — go by the number and the exploded view. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01082-02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Preload Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648358211850,"sku":"01082-02","price":37.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01082-02_fed86d2a-439d-4b8e-84bd-368ba366de50.png?v=1788870653"},{"product_id":"ohlins-bracket-hydraulic-preload-adjust-01084-01","title":"Öhlins Bracket hydraulic preload adjust. – 01084-01","description":"\u003cp\u003eBracket hydraulic preload adjust., Öhlins part number 01084-01. An adjuster that turns without resistance has lost its detent; the setting is then guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01084-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction\u003c\/h2\u003e\u003cp\u003eThis position is identified by its number rather than by a dimension. Click adjusters work through a needle in a seat; the detent spring gives the clicks their feel. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins is one of the few suspension makers that still supplies every position in the exploded view as a single part. Öhlins lists this part under its own number in the service catalogue so a workshop can order exactly what it needs. Tell us the damper's model designation and year and we will match the number for you. The exploded drawing for your unit names the number; if you do not have it, we do.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003e01084-01 is the Öhlins number for this position — the same one printed in the service documentation. Where no measurement is given, the drawing position is what identifies the part. Electronically controlled adjusters replace the needle with a solenoid but keep the same hydraulics. Preload adjusters carry the full spring force and are built accordingly.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eAsk us about a full service: as an authorised Öhlins centre we strip, inspect, replace what is worn and set the unit back to its specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01084-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Preload Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648366141706,"sku":"01084-01","price":43.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01084-01_d760f675-04f9-4164-a216-590388269ab1.png?v=1788870671"},{"product_id":"ohlins-adjustment-knob-25-33-1-01128-01","title":"Öhlins Adjustment knob 25\/33.1 – 01128-01","description":"\u003cp\u003eAdjustment knob 25\/33.1, Öhlins part number 01128-01. The adjuster is the part a rider actually touches, and its detents are what make a setting repeatable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eDimension A 25 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01128-01\u003c\/li\u003e\n\u003cli\u003eDimension B 33.1 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003e25 mm, 33.1 mm: that is the whole specification, and it has to match what came out. The needle tip is the wear part: once rounded, the first few clicks stop doing anything. An adjuster that turns without resistance has lost its detent; the setting is then guesswork. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eA damper that can be rebuilt is a damper that stays on the bike; that is the whole argument for original service parts. Every part in this catalogue is one Öhlins fits itself during assembly and service. The exploded drawing for your unit names the number; if you do not have it, we do. If you are between two sizes, send us the measurement and we will check it against the catalogue.\u003c\/p\u003e\u003ch2\u003eIdentifying the Right Part\u003c\/h2\u003e\u003cp\u003ePart number 01128-01 is unambiguous; the description alone is not, because Öhlins uses similar wording across sizes. Öhlins states dimension a 25 mm, dimension b 33.1 mm for this number, and those figures are the deciding ones. Preload adjusters carry the full spring force and are built accordingly. A worn adjuster loses its clicks, and with them any chance of a methodical setup.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01128-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Adjusters\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension A:\u003c\/em\u003e 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eDimension B:\u003c\/em\u003e 33.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648395731210,"sku":"01128-01","price":6.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01128-01_b9d75049-ad71-45b7-929e-c5c83d3890a4.png?v=1788870756"},{"product_id":"ohlins-bracket-hydraulic-preload-adjust-01164-01","title":"Öhlins Bracket hydraulic preload adjust. – 01164-01","description":"\u003cp\u003eBracket hydraulic preload adjust., Öhlins part number 01164-01. A preload adjuster carries the full spring load and is built as a structural part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01164-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. Detent balls and springs are separate parts because they wear before the housing does. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function. Hydraulic preload adjusters are sealed and pressurised; they are replaced as a unit.\u003c\/p\u003e\u003ch2\u003eGenuine Service Part\u003c\/h2\u003e\u003cp\u003eThis is an original Öhlins part, not an aftermarket equivalent — the tolerances are the ones the unit was assembled to. Rebuilding to specification only works if the parts are to specification — that starts here. Service parts are ordered per piece unless stated otherwise. Öhlins parts are unit-specific: a close dimension is not a substitute.\u003c\/p\u003e\u003ch2\u003eGetting the Number Right\u003c\/h2\u003e\u003cp\u003eOrder under 01164-01. Where several sizes share a description, only the number separates them. Öhlins does not publish a dimension here — go by the number and the exploded view. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range. The adjuster knob is what the rider touches, and Öhlins colour-codes it by function.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01164-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Preload Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648407003402,"sku":"01164-01","price":30.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01164-01_4116d61d-059e-44a0-b871-8e9c6d6a6b3f.png?v=1788870791"},{"product_id":"ohlins-bracket-hydraulic-preload-adjust-01165-01","title":"Öhlins Bracket hydraulic preload adjust. – 01165-01","description":"\u003cp\u003eBracket hydraulic preload adjust., Öhlins part number 01165-01. Detent balls and springs are separate parts because they wear before the housing does.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01165-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Is\u003c\/h2\u003e\u003cp\u003eÖhlins publishes no separate dimension for this position, so the part number carries the identity. Adjuster housings carry seals, and a leak there empties the damper as surely as a shaft seal. A worn adjuster loses its clicks, and with them any chance of a methodical setup. Needle and seat together meter the bleed flow; damage to either changes the whole adjustment range.\u003c\/p\u003e\u003ch2\u003eOriginal Öhlins Part\u003c\/h2\u003e\u003cp\u003eRebuilding to specification only works if the parts are to specification — that starts here. The part is identical to what Öhlins fits in production — same supplier, same specification. Order by part number. The dimensions below are the ones Öhlins publishes for it. The exploded drawing for your unit names the number; if you do not have it, we do.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003eOrder under 01165-01. Where several sizes share a description, only the number separates them. Where no measurement is given, the drawing position is what identifies the part. Öhlins builds click adjusters with defined detents so a setting can be written down and returned to. Hydraulic preload adjusters are sealed units and are replaced rather than opened.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eIf you would rather not open the damper yourself, we can do it — we are an authorised Öhlins service centre and rebuild these units as a matter of routine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01165-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e Preload Parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53648408805642,"sku":"01165-01","price":48.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/01165-01_20607d6e-572f-4153-b90e-c76c28aa4e1d.png?v=1788870793"}],"url":"https:\/\/inter-pace.com\/en-in\/collections\/suspension-adjusters.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}