{"product_id":"ohlins-shock-spring-80-n-mm-150-mm-51-mm-21041-24","title":"Öhlins Shock Spring 80 N\/mm \/ 150 mm \/ Ø 51 mm – 21041-24","description":"\u003cp\u003eÖhlins part number 21041-24 is a shock absorber spring rated at 80 N\/mm, 150 mm long with a 51 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 80 N\/mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eFree length 150 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 21041-24\u003c\/li\u003e\n\u003cli\u003eInner diameter 51 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003e77 mm of usable stroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eProduction has stayed in Sweden since the company was founded in 1976. Anodising is hard-coat rather than decorative, which matters on a component exposed to road salt and stone chips. Rates are offered in defined steps, so a change can be made in one direction at a time.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eFree length 150 mm, inner diameter 51 mm, rate 80 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eThis end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. Firm rates also suit machines carrying luggage as a matter of course. Heavier riders, two-up use and track days all push the choice towards this end. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eA shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. Adding a pillion or luggage changes the rear load enough that the standard rate stops working properly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eRate is the variable that depends on the rider, not on the machine. Two people on the same bike may well want two different numbers. This spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. This is a service part in the proper sense — it wears, it settles, and replacing it restores what the suspension was designed to do.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eA spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag. Spring preload spacers may need adjusting to keep the installed length correct. Set static sag after fitting; the rate is only right if the sag figure lands where Öhlins specifies.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 21041-24\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 80 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 51 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 77 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645405815050,"sku":"21041-24","price":291.0,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_df9ed2e8-b042-4783-bbc4-6efb9dc10565.png?v=1788866853","url":"https:\/\/inter-pace.com\/en-il\/products\/ohlins-shock-spring-80-n-mm-150-mm-51-mm-21041-24","provider":"Inter-Pace","version":"1.0","type":"link"}