
The facts.
| Brand | JetPrime |
|---|---|
| Part number | JP ES 009 |
| Function | Disables the rear brake light switch |
| Type | Rear Brake Light Switch Eliminator |
| Installation | Plug-and-play, no modification to the original wiring |
| Fitment | Aprilia Tuono V4 1100 (2017–2026) / Aprilia Tuono V4 1100 Factory (2019–2026) / Aprilia Tuono V4 1100 RF (2017–2020) / Aprilia Tuono V4 1100 RR (2017–2020) |
| Road approval | None — closed-circuit and race use only |
DescriptionThe whole story▼
Fit a Brembo radial master cylinder to a Tuono V4 and you gain feel, adjustment and a part that has no rear brake light switch. The dashboard reads the missing switch as a fault. JP ES 009 disables that circuit cleanly, so the braking upgrade does not come with a permanent warning attached.
Key Features
- For the Tuono V4 1100 and 1100 Factory, 2017 through 2026
- Disables the rear brake light switch circuit
- Makes an aftermarket Brembo braking system usable without a switch
- Removes the associated dashboard error
- Plug-and-play, no wiring changes
- Reversible if the standard system goes back on
The Upgrade Nobody Warns You About
Braking hardware is the most common upgrade on a Tuono, and the rear master cylinder is where the switch lives. Aftermarket units are built for race use, where a brake light is irrelevant, so they simply do not carry the switch. The result is a bike that brakes better and complains about it every time the ignition is turned on. This eliminator is the missing half of that upgrade.
Fitment and Compatibility
- Aprilia Tuono V4 1100 (2017–2026)
- Aprilia Tuono V4 1100 Factory (2019–2026)
Road Approval
None. A motorcycle whose brake light does not operate is not road legal. Closed-circuit and competition use only.
Fitting It
The rear brake light switch on the Tuono is a pressure or plunger switch at the rear master cylinder. Unplug it, fit the eliminator to the loom connector, and route it up under the tail. No calibration, no bleeding required beyond whatever the brake work itself needs.
Front and Rear Are Separate
This eliminator covers the rear circuit. The front brake light switch is a different component on a different connector, and swapping the front master cylinder raises the same problem again. Check which end of the bike your upgrade actually affects before ordering — the two are not interchangeable.
Specifications
- Brand: JetPrime
- Part number: JP ES 009
- Type: Rear brake light switch eliminator
- Function: disables the rear brake light switch circuit
- Installation: plug-and-play, no modification to the original wiring
- Fitment: Aprilia Tuono V4 1100 / Factory (2017–2026)
- Road approval: none — closed-circuit and race use only
FitmentWhich bikes this fits▼
- Aprilia Tuono V4 1100 (2017–2026)
- Aprilia Tuono V4 1100 Factory (2019–2026)
- Aprilia Tuono V4 1100 RF (2017–2020)
- Aprilia Tuono V4 1100 RR (2017–2020)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.