{"product_id":"zcoo-ex-front-brake-pads-honda-vt1300-stateline","title":"ZCOO EX Race Front Brake Pads Honda VT1300 STATELINE (2011-2016) - Z-N007-EX","description":"\u003cp\u003eBraking hard on the Honda VT1300 STATELINE is a whole-body activity. The reference is the N007 - 39.0 mm of friction height over 101.5 mm of length, on the Nissin fitment the VT1300 STATELINE uses. The compound is EX Race, which on the Honda VT1300 STATELINE builds force with the lever instead of ahead of it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNo proprietary tooling needed: the N007 drops into the Nissin caliper the VT1300 STATELINE already has\u003c\/li\u003e\n\u003cli\u003eCeramic sintering rather than a resin binder, so there is nothing in the N007 to cook out at the top of the range\u003c\/li\u003e\n\u003cli\u003eHolds its friction level through the heat cycles a VT1300 STATELINE front end goes through in a single hard ride\u003c\/li\u003e\n\u003cli\u003eA pack holds two differently shaped pads - ZRM-N007ZM_A + ZRM-N007ZM_B at 101.5 by 39.0 mm and ZRM-N007ZM_B at 101.5 by 39.0 mm - matched to the two sides of the caliper\u003c\/li\u003e\n\u003cli\u003eThe N007 is one of 16 shapes ZCOO builds; this is the one your Nissin caliper takes\u003c\/li\u003e\n\u003cli\u003eLever feel on the VT1300 STATELINE stays linear from the first millimetre of travel to full pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eEvery ZCOO reference, the N007 among them, is built around one idea: keep the friction face flat. The friction layer of the N007 is bonded by a joining process Okada Corporation developed against the failure that ends most sintered pads. It is also why ZCOO can quote fade resistance beyond 600 degrees for the N007 without qualifying it.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eOn a VT1300 STATELINE the second half of a session is where EX Race earns its price. Across 6 model years of the VT1300 STATELINE the behaviour is the same, because the compound is. With no fairing to lean into, the VT1300 STATELINE rider needs the N007 to be predictable above all.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eFor the VT1300 STATELINE of 2011 to 2016 the N007 is the shape ZCOO lists. The same N007 shape covers 70 further machines in the 2026 catalogue. Front axle only. Before ordering, check that your caliper takes a pad of 101.5 mm length and 39.0 mm height.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-N007-EX (EAN 4950545750105)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-N007ZM_A + ZRM-N007ZM_B\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: ZRM-N007ZM_A + ZRM-N007ZM_B 101.5 x 39.0 x 8.0 mm and ZRM-N007ZM_B 101.5 x 39.0 x 8.0 mm\u003c\/li\u003e\n\u003cli\u003eCaliper family: Nissin\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: Honda VT1300 STATELINE, 2011-2016\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53637910921482,"sku":"Z-N007-EX","price":1424000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/N007-produkt_45b5ccd6-842b-45d8-8aeb-e24696f0ca63.png?v=1788777209","url":"https:\/\/inter-pace.com\/en-id\/products\/zcoo-ex-front-brake-pads-honda-vt1300-stateline","provider":"Inter-Pace","version":"1.0","type":"link"}