Accossato rear axle sliders PP001 for BMW S1000 XR (2015-2018)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeRear axle sliders (swingarm protection)
Part numberPP001
MaterialAluminium and plastic
Pieces2 (one per side)
Fitting kitSpacers, screws and all fitting parts included (Accossato)
ColourBlack
FitmentBMW S1000 XR (2015–2018)
Road approvalNone documented, track use only
CheckCompare with the application list before ordering
DescriptionThe whole story▼

Not every S 1000 XR tour begins at the owner's front door. Plenty of riders load the bike into a van or onto a trailer, drive to the foot of the Alps or to a circuit, and only then start the engine. Getting a tall, heavy motorcycle up and down a narrow ramp is a moment when things can go wrong, and the rear end is often the part that gets away. For the S 1000 XR of 2015 to 2018, Accossato has the PP001 rear axle sliders: two black protectors in aluminium and plastic, meant for the swingarm and rear axle.

Key Features

  • Rear axle sliders for the BMW S 1000 XR, 2015 to 2018
  • Accossato Rear Fork Protection, code PP001
  • Aluminium and plastic, finished in black
  • Two protectors per pack, one for each side of the swingarm
  • Spacers, screws and all other fitting parts included, as Accossato states
  • Intended to touch down first and help limit damage at the swingarm and rear axle
  • Matches the PF057 front sliders and TP083 crash pads listed for this bike
  • For track and competition use; no German ABE

Construction and Material Quality

Rear Fork Protection is Accossato's own name for this item, and it refers to protectors for the swingarm and rear axle, not for the front fork. The PP001 is built of aluminium and plastic, comes in black and is packed in pairs. Spacers, screws and the remaining parts for mounting travel in the same box, the maker says. Its description stops short of saying how the protectors are positioned on the S 1000 XR, and so do we; the application list is what decides whether the part is right for your bike.

Ramps, Straps and Trailers

The trickiest part of transporting a motorcycle is getting it in and out. A ramp that is too steep or too narrow, a damp surface or a helper who lets go at the wrong moment can all end with the bike on its side next to the van. With the S 1000 XR, its height makes it harder to see where the rear wheel is heading. Push it up with the engine off and a second person steadying the rear, or ride it up slowly in first gear only if the ramp is wide and secure. Once inside, strap it down at front and rear, pulling the suspension down a little so that it cannot rock on bends. Unloading is the more dangerous half: go slowly, keep a hand on the front brake and never stand below the bike on the ramp. Rear sliders are for the moment when a wheel slips off the edge or the bike topples in the load space. When you arrive, check that they and their screws are still tight before the first ride.

Fitment and Compatibility

Accossato lists the PP001 for the S 1000 XR from 2015 to 2018, one year fewer than the PF057 front axle sliders for the same bike, which run to 2019; the TP083 crash pads complete the set for the XR. At Inter-Pace the PP001 is also listed for the S 1000 R, the S 1000 RR and the Aprilia RSV4. Once it is fitted, turn the rear wheel by hand: the protectors must not touch the chain, the brake caliper or the silencer. Tighten the screws as the workshop manual specifies and look at them again after the first ride.

Road Approval

We do not hold a German ABE or test documentation for the PP001. It is available for racing and competition.

Scope of Delivery

PP001 in black: a rear protector for each side of the XR, together with the spacers, screws and remaining fitting parts.

Specifications

  • Type: Rear axle sliders (swingarm protection)
  • Part number: PP001
  • Material: Aluminium and plastic
  • Pieces: 2 (one per side)
  • Fitting kit: Spacers, screws and all fitting parts included (Accossato)
  • Colour: Black
  • Fitment: BMW S1000 XR (2015–2018)
  • Road approval: None documented, track use only
  • Check: Compare with the application list before ordering
What's includedEverything in the box▼
  • 2x Accossato rear axle slider
FitmentWhich bikes this fits▼
  • BMW S1000 XR (2015–2018)
  • Aprilia RSV4 (2009–2015)
  • BMW S1000R (2014–2018)
  • BMW S1000RR (2015–2018)
  • Suzuki GSX-R 1000 (2009–2016)
  • Suzuki GSX-R 750 (2006–2017)
  • Yamaha R6 (2001–2015)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.