Spider Racing Handlebar Offset 25 – Ducati Panigale V2 890 (2025-2026)

Engineered in Italy and precision-machined from high-strength aluminium alloy, the Spider Racing Handlebar Offset 25 is the measured, safety-conscious upgrade for Ducati Panigale V2 890 riders who demand greater front-end feedback and cornering confidence without overhauling their bike's geometry. Designed expressly for the 2025-2026 model years, this clip-on offset delivers a meaningful ergonomic shift that keeps you safe, stable and in control at every speed.

Key Features

• 25 mm offset with 6.5° inclination for a more committed riding position and sharper initial turn-in — geometry that keeps you planted and in command
• CNC-machined from high-tensile aluminium alloy: maximum structural rigidity with minimal weight penalty
• Ø53 mm clamp diameter — direct, plug-and-play fitment to the Ducati Panigale V2 890 (2025-2026) without modification
• Improves front-wheel feedback and line accuracy, reducing the guesswork that contributes to rider error at speed
• Balanced offset angle suits both road sport riding and trackday use — not so aggressive that it compromises safety on the street
• Made in Italy: Spider Racing's uncompromising quality standards from raw material to finished part

Ergonomics, Control and Safety

The 25 mm offset positions the clip-ons in a way that places more of the rider's weight over the front axle, directly improving feel and predictability through corners. The 6.5° inclination angle is a carefully chosen figure: aggressive enough to sharpen handling and reduce lap times on track, yet measured enough to avoid the wrist fatigue or instability that comes with extreme forward-lean setups. For Panigale V2 890 riders who want more confidence rather than a radical transformation, this is the correct offset to specify.

Compared with higher-offset alternatives in Spider Racing's range, the Offset 25 prioritises balanced, safe ergonomics. You gain:

• More precise turn-in behaviour
• Improved front-end feel and feedback
• Greater cornering control and line consistency
• Stable handling at speed without putting undue load on the upper body

Construction and Build Quality

Spider Racing manufactures this handlebar offset using high-tensile aluminium alloy processed on multi-axis CNC milling equipment. The result is a component with tight dimensional tolerances, a clean surface finish and the structural stiffness to cope with the stresses of repeated hard braking and high-speed direction changes. The lightweight construction also avoids adding unnecessary unsprung or reciprocating mass to the steering assembly — a consideration that matters both for handling and for long-term safety margin.

Fitment and Installation

The Ø53 mm clamp bore matches the Ducati Panigale V2 890 fork tube diameter directly. No adaptor sleeves, machining or additional hardware is required. Mount, torque to the manufacturer's specification and ride. The set ships as a matched pair — left and right — so both sides of your setup change identically, preserving the symmetric handling balance that safe, predictable steering depends upon.

Fitment & Compatibility

• Ducati Panigale V2 890 — model years 2025 and 2026

Specifications