Accossato clutch lever ESK390 with black blade and black hub for Husqvarna VITPILEN 401 (2018-2020)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC clutch lever for the original mounting
Part numberESK390
FunctionClutch lever, left hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentHusqvarna VITPILEN 401 (2018–2020)
Road approvalNone documented, track use only
DescriptionThe whole story▼

A café racer is designed for the open road, but many Vitpilen 401s spend a good part of their lives in town, where the left hand works harder than anywhere else. With the Vitpilen's low handlebar, the left wrist is angled forward, and holding a clutch lever at the friction point for minutes at a time can become uncomfortable. The Accossato ESK390 is a clutch lever for the Husqvarna Vitpilen 401 of 2018 to 2020, machined from aluminium, fitted at the original clutch mounting and adjustable in reach.

Key Features

  • Clutch lever for the Husqvarna Vitpilen 401, 2018 to 2020
  • Fits the original clutch mounting
  • Adjustable distance to the grip
  • Standard blade about 138 mm; short and long in selected colours
  • Milled from solid aluminium and anodised
  • Black hub, blade in one of seven colours
  • Fixed blade without a folding joint
  • No German ABE documented; sold for track use

Construction and Material Quality

The surfaces of the ESK390 are cut, not moulded. Accossato shapes the lever from a solid aluminium blank on CNC machines, which leaves sharp, even contours on the blade and precise features in the hub, namely the pivot bore and the seat of the reach adjuster. Anodising then adds the colour, black on the hub and your choice on the blade. As a fixed lever, the ESK390 has no hinge, and its blade is a single rigid piece that transmits every movement of your fingers directly to the clutch.

A Café Racer in Everyday Traffic

In stop-and-go traffic, the clutch hand repeats the same cycle over and over: pull in, hold, let out to the friction point, creep, pull in again. On an upright bike the wrist stays straight through all of it. On the Vitpilen 401, the low bar angles the wrist forward, and the fingers pull from a less comfortable position. Two small changes make a real difference. First, set the reach so that the blade sits close enough for the fingers not to stretch forward, which would bend the wrist even further. Second, use two fingers instead of four for the creeping part, so that the palm and thumb keep a relaxed hold on the grip. When the queue stops for more than a few seconds, select neutral and let the hand rest. The same lever setting that helps in traffic also makes quick downshifts on a winding road easier.

Fitment and Compatibility

The ESK390 appears in Accossato's catalogue for the Vitpilen 401 across 2018, 2019 and 2020 and goes onto the clutch mounting Husqvarna fitted, in place of the stock lever. For the right hand, the EDF039 brake lever is listed for the same model years and comes in the same colours, so the café racer's cockpit can be finished as a pair.

Road Approval

Road approval in Germany: none documented for this lever. We sell it for closed-circuit use.

Scope of Delivery

Delivered as one ESK390 clutch lever in its own box, colour and length as selected.

Specifications

  • Part number: ESK390
  • Type: fixed clutch lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Husqvarna VITPILEN 401, 2018 to 2020
What's includedEverything in the box▼
  • 1x Accossato CNC clutch lever in its own box
FitmentWhich bikes this fits▼
  • Husqvarna VITPILEN 401 (2018–2020)
  • Husqvarna SVARTPILEN 401 (2018–2020)
  • KTM 125 DUKE (2014–2021)
  • KTM 200 DUKE (2014–2016, 2021)
  • KTM 390 DUKE (2013–2019)
  • KTM RC 125 (2014–2018)
  • KTM RC 390 (2014–2019)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.