Accossato off-road folding clutch lever C7127 with black blade for Kawasaki KLX 150 D-TRACKER (2016)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeCNC folding off-road clutch lever for the original clutch mount
Part numberC7127
FunctionClutch lever, left hand
MaterialMachined from solid Ergal 7075 aluminium alloy
Blade coloursBlack, green
Lever designLonger lever for four fingers
FoldingHinged blade tips forward in a fall (anti-break design)
FitmentKawasaki KLX 150 D-TRACKER (2016)
Road approvalNone documented, off-road use only
DescriptionThe whole story▼

Slow riding is harder than fast riding, and a small supermoto like the Kawasaki KLX 150 D-Tracker is a good tool for practising it. Set out a few cones on a closed piece of tarmac or hard ground, ride tight figure-eights at walking pace, and within minutes you discover how much of the work falls to the clutch. For this bike Accossato lists the C7127, a folding clutch lever for the 2016 model year. It is CNC-machined in Italy from Ergal 7075 and has a long blade for four fingers.

Key Features

  • Folding clutch lever for the Kawasaki KLX 150 D-Tracker, model year 2016
  • Replaces the stock lever at the original clutch mount
  • Long blade shaped for four fingers
  • Anti-break joint lets the blade fold forward when the bike tips over
  • Machined from solid Ergal 7075 in Italy
  • Black or green blade on a dark base
  • No German ABE documented; for closed-ground and off-road use

Construction and Material Quality

The C7127 is made the way Accossato makes its off-road levers: CNC-machined in Italy from a solid piece of Ergal 7075, a high-strength aluminium alloy chosen for strength, low weight and reliability. The lever divides into a dark base, which sits on the pivot of the clutch mount and carries the joint, and a blade in black or green. When the blade is struck, the joint lets it fold forward. On the clutch side the blade is long, with space for four fingers, which leaves plenty of room to work the friction zone with whichever grip you prefer.

Figure-Eights at Walking Pace

The exercise is simple to set up and hard to master. Two cones a few bike lengths apart, a figure-eight around them, the bars at or near full lock. Keep the revs slightly raised and steady, control the speed with the clutch in its friction zone and a light touch of rear brake, and leave the front brake alone, because at full lock it tips the bike into the turn. Look across to the next cone rather than down at the front wheel, and let the bike lean while your body stays upright. On a KLX 150 D-Tracker the low speed and small size make each mistake cheap and each improvement easy to feel.

Cheap, but not free. Sooner or later the clutch goes out too far, the bike lurches, or it stalls at full lock and falls to the inside of the turn. In the left-hand loop of the figure-eight, that puts the clutch lever on the ground with the whole bike leaning on it. The C7127's joint gives the blade the chance of folding forward instead of snapping, so a tip-over at walking pace need not end the session. Riders who practise this way for a few evenings usually find it pays off everywhere else, from tight turns on a track to manoeuvring the KLX 150 D-Tracker through a crowded paddock.

Fitment and Compatibility

Accossato lists the C7127 for the Kawasaki KLX 150 D-Tracker for a single model year, 2016, and fits it at the original clutch mount. For this bike the range has no matching off-road brake lever, so the C7127 is offered on its own, in black or green.

Road Approval

There is no documented German ABE for the C7127. On a KLX 150 D-Tracker registered for the road, the lever is therefore not approved for public roads; use it on closed ground and off-road.

Scope of Delivery

The C7127 clutch lever on its own, blade in black or green.

Specifications

  • Part number: C7127
  • Type: CNC folding off-road clutch lever for the original clutch mount
  • Material: machined from solid Ergal 7075 aluminium alloy, made in Italy
  • Blade colours: black, green
  • Lever design: longer lever for four fingers
  • Folding: hinged blade that can tip forward in a fall (anti-break design)
  • Road approval: none documented, off-road use only
  • Fitment: Kawasaki KLX 150 D-TRACKER (2016)
What's includedEverything in the box▼
  • 1x Accossato CNC off-road clutch lever
FitmentWhich bikes this fits▼
  • Kawasaki KLX 150 D-TRACKER (2016)
  • Kawasaki KLX 125 (2010–2016)
  • Kawasaki KLX 125 D-TRACKER (2010–2016)
  • Kawasaki KLX 250 (2009–2017)
  • Kawasaki KLX 250 D-TRACKER (2008–2016)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.