{"product_id":"zcoo-ex-front-brake-pads-triumph-speed-triple-1050-94r","title":"ZCOO EX Race Front Brake Pads Triumph SPEED TRIPLE 1050 94R (2015-2016) - Z-B005-EX","description":"\u003cp\u003eBraking hard on the Triumph SPEED TRIPLE 1050 94R is a whole-body activity. The pad is the B005, cut at 102.2 by 42.0 mm to sit square in the Brembo caliper of the SPEED TRIPLE 1050 94R. The B005 carries EX Race, the control-oriented of ZCOO's two ceramic mixtures.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCeramic sintering rather than a resin binder, so there is nothing in the B005 to cook out at the top of the range\u003c\/li\u003e\n\u003cli\u003eHolds its friction level through the heat cycles an SPEED TRIPLE 1050 94R front end goes through in a single hard ride\u003c\/li\u003e\n\u003cli\u003eNo bedding-in ritual: the B005 reaches its working friction level within the first few stops\u003c\/li\u003e\n\u003cli\u003eEX Race is the softer of ZCOO's two ceramic mixtures, chosen for feel on a machine like the SPEED TRIPLE 1050 94R rather than outright initial aggression\u003c\/li\u003e\n\u003cli\u003e102.2 by 42.0 mm friction face at 8.05 mm total thickness, cut for the Brembo caliper of the Triumph SPEED TRIPLE 1050 94R\u003c\/li\u003e\n\u003cli\u003eForms a thin ceramic film on the rotor in use, so disc wear on the Triumph SPEED TRIPLE 1050 94R stays far below what a conventional sintered race pad causes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eThe B005 is built on the same platform as ZCOO's endurance-racing references. Expansion gaps between the friction blocks let the B005 material grow into the gaps when hot instead of building stress against itself. The effect is a B005 that presents the same geometry to the disc near the wear limit as it did new.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eThe defining property of the EX Race mixture in the B005 is a flat friction curve. The compound lays a thin ceramic film on the rotor as it beds, which is why the Triumph SPEED TRIPLE 1050 94R sees far less disc wear than a conventional sinter would cause. Which matters most on an SPEED TRIPLE 1050 94R, where the rider's own weight is part of the braking load.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eListed by ZCOO for the Triumph SPEED TRIPLE 1050 94R, model years 2015 to 2016, on the Brembo caliper. The same B005 shape covers 117 further machines in the 2026 catalogue. Front axle only. Before ordering, check that your caliper takes a pad of 102.2 mm length and 42.0 mm height.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-B005-EX (EAN 4950545767882)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-B005C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 102.2 x 42.0 x 8.05 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Brembo\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph SPEED TRIPLE 1050 94R, 2015-2016\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53638635782410,"sku":"Z-B005-EX","price":59.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/B005-produkt_2621070a-45dc-477e-9b86-528b1f82d51c.png?v=1788780065","url":"https:\/\/inter-pace.com\/en-gi\/products\/zcoo-ex-front-brake-pads-triumph-speed-triple-1050-94r","provider":"Inter-Pace","version":"1.0","type":"link"}