{"product_id":"ohlins-shock-spring-130-n-mm-180-mm-57-mm-01095-49","title":"Öhlins Shock Spring 130 N\/mm \/ 180 mm \/ Ø 57 mm – 01095-49","description":"\u003cp\u003eÖhlins part number 01095-49 is a shock absorber spring rated at 130 N\/mm, 180 mm long with a 57 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 130 N\/mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eFree length 180 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003e88 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01095-49\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins manufactures in Upplands Väsby, north of Stockholm, and assembles and tests every unit there before it ships. Shafts are hardened and surface-treated so the seal has a consistent surface to run against. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly.\u003c\/p\u003e\u003ch2\u003eThe Numbers That Matter\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 180 mm and the inner diameter at 57 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eChoosing 130 N\/mm\u003c\/h2\u003e\u003cp\u003eThis end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. Support under braking improves; small-bump comfort gives a little back. A firm rate holds the chassis attitude when the front or rear is loaded hard. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eProgressive springs change rate through the stroke, which suits machines with little travel and a lot of load. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it. A shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eRather than a model list, use the measurements: a fork that accepts this diameter and length is a candidate, and the rate follows from rider weight. Öhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it. Selection is by measurement. If the diameter and free length match your fork, the remaining question is the rate.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eIf the fork has not been serviced recently, bushes and seals are worth replacing while it is apart. Öhlins states an air gap for this application, and that figure is part of the setting rather than a detail. The springs come powder-coated and need no preparation before they go in.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: a spring is a like-for-like replacement of a wear part and carries no separate type approval. Where Öhlins states an approval for a particular motorcycle, it is named under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting matters as much as the part. We are an authorised Öhlins service centre and carry out installation, servicing and setup ourselves — get in touch and we will arrange it alongside your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01095-49\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 130 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 88 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645343817994,"sku":"01095-49","price":56.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_d552056a-796f-41c8-9e30-1be35294cb8f.png?v=1788866678","url":"https:\/\/inter-pace.com\/en-gi\/products\/ohlins-shock-spring-130-n-mm-180-mm-57-mm-01095-49","provider":"Inter-Pace","version":"1.0","type":"link"}