Accossato front axle sliders PF05 for Ducati MULTISTRADA PIKES PEAK 1200 (2016-2017)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFront axle sliders (fork protection)
Part numberPF05
MaterialAluminium and plastic
Pieces2 (one per side)
Fitting kitSpacers, screws and all fitting parts included (Accossato)
ColourBlack
FitmentDucati MULTISTRADA PIKES PEAK 1200 (2016–2017)
Road approvalNone documented, track use only
CheckCompare with the application list before ordering
DescriptionThe whole story▼

Ducati named the Multistrada 1200 Pikes Peak after the famous race up a Colorado mountain, and some owners take the idea literally. Across Europe, clubs run hill climbs on closed mountain roads, and a sporty adventure bike with good suspension and an upright position is not out of place among the entries. It is racing, though, with timing, kerbs, straw bales and a paddock on a slope. For the Multistrada 1200 Pikes Peak of 2016 and 2017, Accossato lists the PF05 front axle sliders.

Key Features

  • Front axle sliders for the Ducati Multistrada 1200 Pikes Peak, 2016 and 2017
  • Accossato PF05 front fork protection
  • Two black protectors
  • Aluminium and plastic
  • Accossato packs spacers, screws and all further mounting parts
  • Also listed for this bike: PP069 rear axle sliders
  • No German ABE on file; intended for racing and competition

Construction and Material Quality

Accossato's PF05 consists of two black protectors, made from aluminium and plastic, one for each side of the front. The kit, according to Accossato, contains the spacers, the screws and all the other parts needed to mount it. For competition, that simplicity is welcome. If the Multistrada 1200 Pikes Peak slides or falls, the sliders are intended to meet the ground before the fork, which can reduce the damage at the front. Once a slider is worn or cracked it is replaced, and a spare pair in the van is never wasted at a race meeting.

Entering a Hill Climb

Hill climbs are among the most accessible forms of motorsport for road riders, but they come with rules. The organiser sets the technical requirements, from lights and mirrors that must be taped or removed to the clothing allowed, and a scrutineer checks every bike before practice. Read the regulations early, because some events ask for a licence from the national federation and proof of insurance. On the day, walk or ride the course at road speed first to learn its bumps, cambers and drains, and note where the run-off is short. Runs are brief, so the tyres rarely reach full temperature; treat the first corners of each one with respect. A paddock on a mountain road is often sloping and gravelly, so park the Multistrada 1200 Pikes Peak with care between runs, facing uphill with a gear engaged. And accept that the aim is a clean run, not a spectacular one.

Fitment and Compatibility

Accossato gives the PF05 for the Multistrada 1200 Pikes Peak of 2016 and 2017, and we have linked it to those years. For the rear of the same bike, the PP069 axle sliders are listed with identical years. The PF05 also appears in our shop for the Multistrada 1200 Enduro and the Monster 1200 R. Before an event, check what the organiser's technical rules say about protection parts, and after fitting, turn the bars of your Multistrada 1200 Pikes Peak through their full range with the front wheel spinning freely.

Road Approval

For the PF05 there is no German ABE or test mark available to us, so we sell the sliders for racing and competition use.

Scope of Delivery

A pair of black PF05 front axle sliders with the spacers, screws and other mounting parts that Accossato supplies.

Specifications

  • Type: Front axle sliders (fork protection)
  • Part number: PF05
  • Material: Aluminium and plastic
  • Pieces: 2 (one per side)
  • Fitting kit: Spacers, screws and all fitting parts included (Accossato)
  • Colour: Black
  • Fitment: Ducati MULTISTRADA PIKES PEAK 1200 (2016–2017)
  • Road approval: None documented, track use only
  • Check: Compare with the application list before ordering
What's includedEverything in the box▼
  • 2x Accossato front axle slider
FitmentWhich bikes this fits▼
  • Ducati MULTISTRADA PIKES PEAK 1200 (2016–2017)
  • Ducati HYPERMOTARD 939 (2016–2018)
  • Ducati Hyperstrada 821 (2013–2015)
  • Ducati MONSTER 1200 (2014–2018)
  • Ducati MONSTER 1200 R (2016–2018)
  • Ducati MONSTER 1200 S (2014–2018)
  • Ducati MULTISTRADA 1200 ENDURO (2016–2018)
  • Ducati MULTISTRADA 1260 (2018)
  • Ducati MULTISTRADA 1260 PIKES PEAK (2018)
  • Ducati MULTISTRADA 1260 S (2018)
  • Ducati MULTISTRADA 1260 S D AIR (2018)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.