{"product_id":"zcoo-exr-front-brake-pads-mv-agusta-dragster-rr-scs-800-2023-2025","title":"ZCOO EXR Front Brake Pads MV Agusta Dragster RR SCS 800 (2023-2025) - Z-B007-EXR","description":"\u003cp\u003eEvery tenth on a Dragster RR SCS 800 is bought between the brake light and the apex. The pad is the B007, cut at 85.0 by 51.0 mm to sit square in the Brembo caliper of the Dragster RR SCS 800. On the MV Agusta Dragster RR SCS 800 the B007 is now available in EXR, the compound that carries ZCOO's endurance programme.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe B007 shape also serves 111 further machines in the ZCOO 2026 catalogue, so availability stays good\u003c\/li\u003e\n\u003cli\u003eThe ceramic layer is sintered to the plate rather than pressed against it, which is what keeps the B007 together at the top of its temperature range\u003c\/li\u003e\n\u003cli\u003eLow noise and low rotor scoring, which on a Dragster RR SCS 800 means the discs outlast several sets of pads\u003c\/li\u003e\n\u003cli\u003eHolds its friction level through the heat cycles a Dragster RR SCS 800 front end goes through in a single hard ride\u003c\/li\u003e\n\u003cli\u003eIdentical B007 geometry to the EX Race version, so switching compounds on the Dragster RR SCS 800 changes nothing about fitting\u003c\/li\u003e\n\u003cli\u003eThe B007 is one of 16 shapes ZCOO builds; this is the one your Brembo caliper takes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eLook behind the friction face of the B007 and the engineering is all about stiffness. Expansion gaps between the friction blocks let the B007 material grow into the gaps when hot instead of building stress against itself. For the rider of a Dragster RR SCS 800 the whole of that engineering shows up as one thing: a lever that means the same on the last stop as on the first.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eThere are two ways to make a pad stronger, and on the B007 ZCOO used both. It is rated at or above the EXC Endurance compound it succeeds, and EXC already outlasted EX Race by roughly a factor of two. On a machine ridden as hard as the Dragster RR SCS 800, a pad whose behaviour does not drift is worth more than one that is briefly stronger.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eZCOO catalogues the B007 for the Dragster RR SCS 800 of 2023 to 2025. Front axle only; the B007 has no rear counterpart in the ZCOO programme. The same B007 shape covers 111 further machines in the 2026 catalogue. Before ordering, check that your caliper takes a pad of 85.0 mm length and 51.0 mm height.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-B007-EXR (EAN 4950545771780)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-B007C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EXR - ceramic-sintered, successor to EXC Endurance\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 85.0 x 51.0 x 8.0 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Brembo\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: MV Agusta Dragster RR SCS 800, 2023-2025\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53638470992138,"sku":"Z-B007-EXR","price":126.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/B007-produkt_a7d27eb8-0361-4a71-8983-45bb9890b7a7.png?v=1788778656","url":"https:\/\/inter-pace.com\/en-ge\/products\/zcoo-exr-front-brake-pads-mv-agusta-dragster-rr-scs-800-2023-2025","provider":"Inter-Pace","version":"1.0","type":"link"}