Accossato clutch lever ESD037 with black blade and black hub for Moto Guzzi V7 III SPECIAL (2017-2020)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC clutch lever for the original mounting
Part numberESD037
FunctionClutch lever, left hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentMoto Guzzi V7 III SPECIAL (2017–2020)
Road approvalNone documented, track use only
DescriptionThe whole story▼

Look at the drivetrain of a Moto Guzzi V7 III Special and it resembles a small car more than a typical motorcycle. The crankshaft runs lengthwise, a single dry clutch plate sits behind it, the gearbox follows, and a shaft takes the drive to the rear wheel. That layout has been a Guzzi signature for decades, and it gives the clutch a feel of its own. Accossato's ESD037 is a clutch lever for the V7 III Special of 2017 to 2020, CNC-machined from aluminium, adjustable for reach and made in short, standard and long versions.

Key Features

  • Replaces the clutch lever of the V7 III Special, 2017 to 2020
  • Mounts at the original clutch mounting
  • Adjustable reach
  • Three blade lengths, the standard one approximately 138 mm
  • Long blade in blue, gold, green and orange for a lighter pull
  • Black anodised hub, blade in one of seven colours
  • Fixed lever, no folding mechanism
  • Delivered in an Accossato box

Construction and Material Quality

A clutch lever is pulled against spring pressure thousands of times a year, so stiffness and a close fit at the pivot matter more than looks. The ESD037 is milled from aluminium rather than cast, which gives it a dense, even section, and it is fixed along its whole length, without the hinge a folding lever needs. After machining it is anodised: the hub, with the pivot bore and the adjuster, always in black, the blade in black, blue, red, orange, gold, silver or green. There is no paint to wear through where the fingers rest.

One Dry Plate

Most motorcycle clutches are a stack of plates running in engine oil. The V7 III Special uses a single dry plate instead, and without an oil bath the take-up tends to feel direct. The usual technique is short and deliberate: find the point where the plate begins to grip, hold it only as long as the bike needs to start rolling, then let out the rest of the travel. Long spells of slipping at walking pace are something a dry clutch is better spared, so the more precisely your fingers can place the lever, the less time the plate spends in that zone. This is where the adjustable reach earns its keep. With the ESD037 set so that the take-up point falls where your fingers are relaxed rather than stretched, the release becomes a small, repeatable movement. On the V7 III Special, the standard blade feels closest to the original; the long one adds leverage for riders who prefer a lighter pull, and the short one suits two-finger use.

Fitment and Compatibility

Accossato lists the ESD037 for the V7 III Special from 2017 to 2020, with the model entered as V7 750 Special. The lever replaces the original at the factory clutch mounting. On the right side of the bar, the EDF016 brake lever is listed for the same years and in the same range of colours.

Road Approval

Without a documented German ABE, the ESD037 is sold by us for track use.

Scope of Delivery

You receive one clutch lever for the V7 III Special, boxed by Accossato, in the colour and blade length of your order.

Specifications

  • Part number: ESD037
  • Type: fixed clutch lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Moto Guzzi V7 III SPECIAL, 2017 to 2020
What's includedEverything in the box▼
  • 1x Accossato CNC clutch lever in its own box
FitmentWhich bikes this fits▼
  • Moto Guzzi V7 III SPECIAL (2017–2020)
  • Benelli BN251 (2016–2017)
  • Benelli BN302 (2015–2017)
  • Benelli BN600 GT (2015–2016)
  • Benelli BN600 R (2014–2016)
  • Benelli LEONCINO 500 (2017)
  • Benelli LEONCINO 500 TRAIL (2018)
  • Benelli TRK 502 (2017–2018)
  • Moto Guzzi V7 II Racer ABS 750 (2015–2016)
  • Moto Guzzi V7 II SPECIAL (2015–2016)
  • Moto Guzzi V7 II STONE (2015–2016)
  • Moto Guzzi V7 III Milano 750 (2018–2020)
  • Moto Guzzi V7 III Racer 750 (2017–2020)
  • Moto Guzzi V7 III STONE 750 (2017–2020)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.