TK Dischi Freno SBK 6.0 brake disc kit for BMW S1000RR K67 with anodised inner carrier⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandTK Dischi Freno
SeriesSBK 6.0
Disc diameter320 mm (330 mm available on request)
Disc thickness6.0 mm
Friction ring width30 mm
FitmentBMW S1000RR K67 (2019–2026)
Scope of delivery2 brake discs (left and right)
Inner carrier finishHard-anodised, black, red, or blue anodised aluminium
DescriptionThe whole story▼

When stopping distances and rider safety are non-negotiable, the TK Dischi Freno SBK 6.0 brake disc kit delivers race-validated confidence for the BMW S1000RR K67. Developed and tested in MotoGP and World Superbike competition, these discs bring genuine motorsport safety standards to every rider — on track or on road.

Key Features

  • Race-tested safety credentials: engineered and proven under MotoGP and WSBK conditions, guaranteeing consistent, fade-resistant braking power.
  • Up to 20% lower operating temperatures: angled drilling channels heat away from the friction surface, reducing brake fade risk and improving wet-weather performance.
  • Reduced rotating mass: lighter rotational inertia sharpens steering response and eases braking effort, lowering rider fatigue on long sessions.
  • Extended brake pad life: the optimised disc surface maintains full stopping power without accelerating pad wear.
  • Choice of anodised inner carrier: hard-anodised, black, red, or blue — functional protection with a distinctive finish.
  • Complete axle set: supplied as a matched left and right pair for consistent braking balance.

Safety, Certification and Build Quality

TK Dischi Freno built the SBK 6.0 series to the exacting demands of international racing regulations, where brake reliability is a matter of rider safety, not merely performance. The 6.0 mm disc thickness is precisely controlled to deliver the stiffness required under maximum deceleration, while the angled through-holes are positioned to evacuate heat, water, and debris efficiently without compromising structural integrity. The inner carrier is hard-anodised or colour-anodised aluminium, resisting corrosion and thermal stress over an extended service life. Because the discs are 6.0 mm thick, it is essential to confirm that your brake calipers have sufficient clearance for this specification before fitting.

Performance on Road and Track

The SBK 6.0 kit is engineered to give S1000RR riders measurable gains in braking confidence. Reduced brake-lever effort under hard deceleration is especially noticeable in wet conditions, where the drilled pattern clears water from the friction ring rapidly. The 320 mm diameter is the standard fitment; a 330 mm option is available on request for riders seeking additional braking leverage on circuit. Whichever diameter is chosen, the geometry is developed specifically around the BMW S1000RR K67 caliper and wheel carrier dimensions.

Fitment and Compatibility

This brake disc kit is designed exclusively for the following:

  • BMW S1000RR K67 (2019–2026)

Always verify caliper compatibility with 6.0 mm disc thickness before installation. Note that red and blue inner carrier finishes may carry extended lead times.

Part Numbers by Finish

  • Hard-anodised: B08EL_B08ER_SBK6_ha
  • Black: B08EL_B08ER_SBK6_b
  • Red: B08EL_B08ER_SBK6_r
  • Blue: B08EL_B08ER_SBK6_bl

Specifications

Attribute Detail
Disc diameter 320 mm (330 mm available on request)
Disc thickness 6.0 mm
Friction ring width 30 mm
Fitment BMW S1000RR K67 (2019–2026)
Scope of delivery 2 brake discs (left and right)
Inner carrier finish options Hard-anodised, black, red, blue
What's includedEverything in the box▼
  • 2x TK Dischi Freno SBK 6.0 brake discs (left and right)
FitmentWhich bikes this fits▼
  • BMW S1000RR K67 (2019–2026)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.