{"product_id":"ohlins-shock-spring-170-n-mm-295-mm-46-mm-60180-01","title":"Öhlins Shock Spring 170 N\/mm \/ 295 mm \/ Ø 46 mm – 60180-01","description":"\u003cp\u003eÖhlins part number 60180-01 is a shock absorber spring rated at 170 N\/mm, 295 mm long with a 46 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e170 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 295 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 170 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 60180-01\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eÖhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. Two units carrying the same part number behave the same way out of the box, which is the whole point of testing each one. Anodising is hard-coat rather than decorative, which matters on a component exposed to road salt and stone chips.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eThe 46 mm bore and 295 mm length are the two figures that decide whether it physically fits; 170 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eSupport under braking improves; small-bump comfort gives a little back. Heavier riders, two-up use and track days all push the choice towards this end. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eÖhlins sells rear springs separately precisely because rider weight varies more than machine weight does. Progressive springs change rate through the stroke, which suits machines with little travel and a lot of load. A rear spring is the cheapest part of the suspension and the one that decides the most.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider? If you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eSpring preload spacers may need adjusting to keep the installed length correct. Öhlins supplies a setting sheet with the springs; the numbers on it assume the specified oil. Öhlins states the oil and the air-gap for this application — both are part of the setting, not a detail.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: no separate certificate. The spring changes the rate, not the construction of the fork, and is treated as a service part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting matters as much as the part. We are an authorised Öhlins service centre and carry out installation, servicing and setup ourselves — get in touch and we will arrange it alongside your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 60180-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 170 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 170 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645417185546,"sku":"60180-01","price":606.09,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_5165bfb0-5fba-4a64-a0bc-441de114e76d.png?v=1788866918","url":"https:\/\/inter-pace.com\/en-fo\/products\/ohlins-shock-spring-170-n-mm-295-mm-46-mm-60180-01","provider":"Inter-Pace","version":"1.0","type":"link"}