{"title":"Bodywork accessories","description":"\u003cp\u003ePuig bodywork accessories — screen mounting kits, deflectors, hand guards, headlight protectors and the supporting parts around windshields and fairings.\u003c\/p\u003e\u003cp\u003eThe right bracket kit or deflector finishes a screen installation properly and adds function road bikes appreciate: wind relief for the hands, stone protection for expensive headlights. Model-year fitment on every part.\u003c\/p\u003e","products":[{"product_id":"feel-racing-quick-change-front-mudguard-bracket-kit-ducati-panigale-v2","title":"Feel Racing Quick-Change Front Mudguard Bracket Kit Ducati Panigale V2 955 (2020-2024) FR.01.KIT","description":"\u003cp\u003eEngineered for the demands of WorldSSP-inspired racing preparation, the Feel Racing FR.01.KIT Quick-Change Front Mudguard Bracket Kit brings genuine pit-lane efficiency to the Ducati Panigale V2 955. Designed to replace the standard fork-mounted supports, this kit reimagines the front end as a service-friendly assembly that honours the racing heritage it was built around.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDramatically reduces front wheel change times during trackdays and race meetings\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the OEM Showa D43 mm fork fitted to the Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eReplaces the standard OEM mudguard brackets with a cleaner, race-oriented mounting solution\u003c\/li\u003e\n\u003cli\u003eIncludes left and right brackets plus all mounting hardware — everything needed to fit\u003c\/li\u003e\n\u003cli\u003eIdeal as the foundation of a complete Quick-Change front-end setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFeel Racing has deep roots in WorldSSP paddock preparation, and the FR.01.KIT reflects that lineage in every detail. The bracket geometry is derived from race-service experience — where every second in the wheel-change bay matters. The clean lines and purposeful construction replace the bulk of the factory supports with a solution that looks at home on a race-prepped Panigale as much as it performs on one.\u003c\/p\u003e\u003cp\u003eUnlike generic aftermarket alternatives, this kit is purpose-designed around the Showa fork's 43 mm tube diameter, ensuring a precise, rattle-free fit that maintains the chassis geometry the Panigale V2 was developed with.\u003c\/p\u003e\u003ch2\u003eTrack Use and Service Logic\u003c\/h2\u003e\u003cp\u003eAt a busy trackday, front tyre changes and wheel swaps eat into limited session windows. The FR.01.KIT streamlines that process by creating an optimised front-mudguard mounting interface — reducing the steps required to drop and refit the front wheel without compromising structural integrity or road-legal mudguard retention.\u003c\/p\u003e\u003cp\u003eInstallation requires removing the original OEM fork brackets, which this kit is designed to replace. Once fitted, the system integrates seamlessly with the matching Feel Racing front mudguard (COD. FR.564.111.C) and Quick-Change front axle kit (COD. FR.02.KIT) for a complete, cohesive race-service solution.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eDucati Panigale V2 955, model years 2020 to 2024, fitted with the original Showa fork, tube diameter 43 mm (D43 mm).\u003c\/p\u003e\u003cp\u003eNote: fitting requires removal of the original OEM mudguard supports from the fork legs. This kit is a direct replacement, not an add-on.\u003c\/p\u003e\u003ch2\u003eCompatible and Recommended Components\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront mudguard — COD. FR.564.111.C\u003c\/li\u003e\n\u003cli\u003eFront wheel axle kit — COD. FR.02.KIT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFR.01.KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eQuick-Change front mudguard bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFork compatibility\u003c\/td\u003e\n\u003ctd\u003eShowa, Ø 43 mm (D43 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTrack \/ race service \/ quick-change wheel changes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation note\u003c\/td\u003e\n\u003ctd\u003eOEM fork brackets must be removed prior to fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169037738250,"sku":"FR.01.KIT","price":714.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FrontMudgQuickChange.png?v=1780819936"},{"product_id":"feel-racing-electronics-side-fairing-bracket-kit-ducati-panigale-v2-955-fr","title":"Feel Racing Electronics \u0026 Side Fairing Bracket Kit for Ducati Panigale V2 955 (2020-2024) FR.03.KIT","description":"\u003cp\u003eConverting a Panigale V2 for track use throws up one immediate challenge: finding a clean, logical home for every piece of electronics. The Feel Racing FR.03.KIT solves that problem in a single install, combining dedicated electronics mounting hardware with DZUS quick-release side fairing brackets so your build stays tidy, serviceable, and ready for a fast pit-lane turnaround.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectronics mounting hardware engineered to make the most of the available space around the ECU, data logger, sensors, and wiring harness\u003c\/li\u003e\n\u003cli\u003eDZUS quick-release side fairing brackets allow rapid panel removal and refitting — ideal for trackdays, box checks, and mid-session adjustments\u003c\/li\u003e\n\u003cli\u003eAn essential addition when running an aluminium racing tank (COD. 58613271A), where correct component layout and side-panel fitment become critical\u003c\/li\u003e\n\u003cli\u003eDesigned for repeatable, consistent mounting points that teams and mechanics can rely on across multiple build sessions\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included in the kit — no additional fixings to source separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability on Track\u003c\/h2\u003e\u003cp\u003eThe real value of the FR.03.KIT shows up not on lap-time sheets but in the time saved every time the fairing comes off. A straightforward DZUS quarter-turn is all it takes to free a side panel, giving immediate access to the electronics bay without disturbing cables or connectors. For riders who compete regularly, that ease of access translates directly into lower stress, faster pre-session checks, and more time focused on setup rather than spannering.\u003c\/p\u003e\u003cp\u003eThe electronics brackets themselves bring discipline to what can otherwise become a tangle of components zip-tied wherever space permits. By giving each item — ECU, logger, sensors, loom — a defined home, the kit makes fault-finding quicker and re-assembly after a service completely straightforward. It is the kind of detail that distinguishes a professional racing conversion from a hurried track hack.\u003c\/p\u003e\u003ch2\u003eCompatible Components\u003c\/h2\u003e\u003cp\u003eThe FR.03.KIT is designed for setups that include the following Feel Racing and OEM components:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRacing tank (aluminium) — COD. 58613271A\u003c\/li\u003e\n\u003cli\u003eCentral wiring harness — COD. FR.163.125\u003c\/li\u003e\n\u003cli\u003eVoltage regulator — COD. 54040301B\u003c\/li\u003e\n\u003cli\u003eCoils — COD. 38040221B\u003c\/li\u003e\n\u003cli\u003eControl unit (ECU) — COD. SW_WSS6_AD2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDucati Panigale V2 955 (2020–2024)\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProduct: Electronics \u0026amp; Side Fairing Bracket Kit V01\u003c\/li\u003e\n\u003cli\u003eBrand: Feel Racing\u003c\/li\u003e\n\u003cli\u003ePart number: FR.03.KIT\u003c\/li\u003e\n\u003cli\u003eFunction: Electronics bay organisation and mounting for ECU, data logger, sensors, and wiring loom\u003c\/li\u003e\n\u003cli\u003eAdditional feature: Side fairing brackets with DZUS quick-release fasteners\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020–2024)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ trackday \/ racing conversion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038000394,"sku":"FR.03.KIT","price":518.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ElectronicSideFairingSupport.png?v=1780819943"},{"product_id":"feel-racing-front-battery-holder-worldssp","title":"Feel Racing Front Battery Holder WorldSSP – Ducati Panigale V2 955 (2020-2024) FR.07.KIT","description":"\u003cp\u003eEngineered for WorldSSP-inspired track conversions, the Feel Racing Front Battery Support (FR.07.KIT) is a precision-crafted battery basket support that relocates the battery housing forward — a purposeful design decision rooted in racing's relentless pursuit of weight distribution and packaging efficiency. Designed specifically for the Ducati Panigale V2 955, this component carries the hallmarks of Feel Racing's competition heritage: clean lines, thoughtful integration, and a fitment that works in concert with the rest of their WorldSSP fairing system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront battery relocation positions the battery housing forward, over the air duct snorkel and mounted to the front subframe for improved weight balance\u003c\/li\u003e\n\u003cli\u003eSupports optimised centre-of-gravity management — a measurable advantage on track where setup balance is critical\u003c\/li\u003e\n\u003cli\u003eMultiple integrated cable guides bundle and route the front wiring harness cleanly, reducing clutter and improving serviceability at the circuit\u003c\/li\u003e\n\u003cli\u003eDesigned to integrate directly with the Feel Racing carbon front subframe COD. FR.495.112.C as part of a complete WorldSSP conversion\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware as standard — ready to fit straight from the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFeel Racing have built their reputation supplying components to WorldSSP paddocks, and the FR.07.KIT reflects that background. Every detail of this battery holder — from its mounting geometry to the placement of each cable guide — has been conceived as part of a wider system rather than an afterthought. The result is a component that looks at home beneath a full race fairing, where tidy wiring and purposeful part placement are as important as outright lap time.\u003c\/p\u003e\u003cp\u003eThe front subframe mounting position is not arbitrary: locating the battery forward and high, over the air duct snorkel, allows the builder to reclaim packaging space elsewhere and centralise mass in line with the chassis. For trackday machines and full race builds alike, this kind of considered repositioning can meaningfully influence corner entry balance and front-end feel.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe FR.07.KIT is designed exclusively for the Ducati Panigale V2 955, covering model years 2020 through 2024. It is designed to pair with the Feel Racing carbon front subframe (COD. FR.495.112.C), and is recommended as part of a complete front-end WorldSSP conversion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible model: Ducati Panigale V2 955 (2020, 2021, 2022, 2023, 2024)\u003c\/li\u003e\n\u003cli\u003ePairs with: Feel Racing Carbon Front Subframe – COD. FR.495.112.C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number \/ SKU\u003c\/td\u003e\n\u003ctd\u003eFR.07.KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eFront Battery Support (battery basket support)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eBattery housing relocation to front subframe + front wiring cable management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eFR.495.112.C – Carbon Front Subframe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038098698,"sku":"FR.07.KIT","price":297.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BatterieholderV2.png?v=1780819946"},{"product_id":"feel-racing-pressure-lambda-sensor-bracket","title":"Feel Racing Pressure \u0026 Lambda Sensor Bracket – Ducati Panigale V2 955 (2020-2024) FR.829.181","description":"\u003cp\u003eKeeping your Ducati Panigale V2 955 tidy and troubleshoot-ready on track days starts with getting the ancillary sensor hardware mounted properly. The Feel Racing Pressure \/ Lambda Sensor Bracket (FR.829.181) gives every critical sensor a dedicated, stable home — so wiring stays organised, access stays quick, and your setup stays repeatable from session to session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated mounting points for the engine pressure sensor, module\/control box, and lambda sensor in a single compact bracket\u003c\/li\u003e\n\u003cli\u003eDefined, rigid fixing positions eliminate sensor movement under vibration and hard braking\u003c\/li\u003e\n\u003cli\u003eCleaner wiring routing cuts diagnostic time when chasing electrical gremlins between sessions\u003c\/li\u003e\n\u003cli\u003eDesigned to work directly with the Aviorace pressure sensor (COD. SP10) and the Feel Racing main wiring harness (COD. FR.163.125)\u003c\/li\u003e\n\u003cli\u003eSupplied with all necessary mounting hardware — ready to fit straight out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability on Track and at Home\u003c\/h2\u003e\u003cp\u003eFor riders who attend regular track days and want a professional, repeatable setup without spending hours untangling cables in the paddock, this bracket delivers genuine everyday value. Sensor positions are fixed and consistent every time the fairing comes off, making pre-session checks and post-session servicing noticeably faster. The bracket supports three key components — engine pressure sensor, module, and lambda sensor — and keeps the entire electrical area in the motor bay looking purposeful rather than makeshift.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Integration\u003c\/h2\u003e\u003cp\u003eFeel Racing components are engineered specifically for competition use on WorldSSP-class machinery, and this bracket is no different. Compact dimensions mean it slots cleanly into the Panigale V2 955's existing layout without fighting for space, while the included mounting hardware ensures a solid, rattle-free installation. When combined with the FR.163.125 main wiring harness, the whole sensor assembly integrates into a cohesive, race-quality electrical package.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 (2020, 2021, 2022, 2023, 2024)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCompatible ancillary components:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAviorace pressure sensor – COD. SP10\u003c\/li\u003e\n\u003cli\u003eFeel Racing main wiring harness – COD. FR.163.125\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFR.829.181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMounting bracket for engine pressure sensor, module, and lambda sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible sensors\u003c\/th\u003e\n\u003ctd\u003eAviorace SP10, Feel Racing main wiring FR.163.125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack day, racing, clean sensor setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003ePressure \/ lambda sensor bracket including mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038328074,"sku":"FR.829.181","price":132.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PressurLambdaBracketV2.png?v=1780819959"},{"product_id":"feel-racing-starter-relay-bracket-ducati-panigale-v2-955","title":"Feel Racing Starter Relay Bracket for Ducati Panigale V2 955 (2020-2024) – FR.829.171","description":"\u003cp\u003eWhen building a clean, service-friendly Ducati Panigale V2 955 for road or track use, it is the practical details that pay off every time the fairing comes off. The Feel Racing Contactor Support Bracket FR.829.171 replaces the factory starter relay mounting with a simplified stainless steel solution — less bulk in the electrical bay, easier access during servicing, and a noticeably tidier result without compromising reliability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStainless steel construction offers excellent corrosion resistance and long-term durability in a demanding electrical environment\u003c\/li\u003e\n\u003cli\u003eSimplified design reduces weight compared to the OEM bracket through a leaner, purpose-built construction\u003c\/li\u003e\n\u003cli\u003eCleaner packaging in the electrical area makes wiring runs neater and routine maintenance faster\u003c\/li\u003e\n\u003cli\u003eIdeal for trackday preparation and race conversions where orderly, accessible build quality matters\u003c\/li\u003e\n\u003cli\u003eCompatible with Ducati starter relay \/ contactor part number 39740081B\u003c\/li\u003e\n\u003cli\u003eSupplied complete with all necessary mounting hardware — ready to fit straight from the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eNot every upgrade has to be dramatic to make a real difference. On any Panigale V2 955 used regularly — whether for weekend trackdays, race weekends or as a well-maintained road bike that sees the fairing removed for servicing — a tidy electrical bay saves time and reduces frustration. The FR.829.171 is the sort of detail-oriented part that rewards every time you work on the bike: the relay sits correctly, the hardware is on hand, and the area around it stays organised. Feel Racing have engineered this bracket specifically for the 2020-2024 Panigale V2 955, so fitment is precise and no adaptation is required.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eStainless steel was the right material choice here. It will not corrode, it will not flex under vibration, and it presents a professional finish in an area of the bike that is usually hidden but always reflects the builder's attention to detail. The simplified construction relative to the factory part is not a compromise — it is a deliberate reduction of unnecessary complexity, delivering a bracket that does exactly what is needed without excess material or weight.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is designed and manufactured exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023 and 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCompatible starter relay \/ contactor: COD. 39740081B\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eStarter relay \/ contactor support bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFR.829.171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSimplified, lighter replacement for the OEM starter relay bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible relay\u003c\/td\u003e\n\u003ctd\u003e39740081B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eBracket and all mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038393610,"sku":"FR.829.171","price":89.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ContactorSupportBracket.png?v=1780819960"},{"product_id":"feel-racing-map-pick-up-staubli-sensor-bracket","title":"Feel Racing MAP \/ Pick-up \/ Stäubli Sensor Bracket – Side Mount for Ducati Panigale V2 955 (2020-2024) FR.829.132","description":"\u003cp\u003eWhen you strip a Ducati Panigale V2 955 down to race specification, every cubic centimetre of available space demands a considered solution. The Feel Racing sensor bracket FR.829.132 is a precision-engineered side-mount carrier that installs in place of the battery, converting otherwise unused real estate into a clean, structured mounting surface for your MAP\/BAP sensor, pick-up sensor and Stäubli sensor simultaneously.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered specifically for the Ducati Panigale V2 955 in WorldSSP and track configurations, ensuring exact fitment with no improvised fixings.\u003c\/li\u003e\n\u003cli\u003eSide-mount design occupies the factory battery position, freeing adjacent space for other racing components and reducing overall packaging complexity.\u003c\/li\u003e\n\u003cli\u003eAccommodates MAP\/BAP sensor (intake manifold pressure sensor), pick-up sensor and Stäubli sensor in a single, organised assembly.\u003c\/li\u003e\n\u003cli\u003eProvides defined, repeatable mounting points that eliminate improvised cable routing and reduce vibration-induced wear on sensor connectors.\u003c\/li\u003e\n\u003cli\u003eShips complete with all necessary mounting hardware so the bracket is ready to install straight from the box.\u003c\/li\u003e\n\u003cli\u003eDesigned to pair directly with the Feel Racing main wiring loom FR.163.125 for a fully integrated electronics package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eFeel Racing produces this bracket to the exacting standards expected in WorldSSP competition. The mounting points are machined to precise tolerances, ensuring sensors seat correctly and remain secure under the sustained vibration of track use. The included mounting hardware is matched to the bracket's geometry, removing any guesswork during assembly. The result is a component that looks as deliberate as it functions — no zip-ties, no improvised brackets, no wasted movement in the loom.\u003c\/p\u003e\u003ch2\u003ePerformance and Packaging Benefits\u003c\/h2\u003e\u003cp\u003eIn a serious track build, sensor management is as important as the sensors themselves. By consolidating the MAP\/BAP sensor, pick-up sensor and Stäubli sensor onto a single bracket at the battery position, FR.829.132 dramatically improves cable routing discipline. Leads run a predictable, repeatable path; technicians can locate and inspect sensors quickly between sessions; and the space elsewhere in the fairing envelope remains available for data loggers, quick-release couplings or additional electronics. This is the kind of detail that separates a professional race preparation from a hurried conversion.\u003c\/p\u003e\u003ch2\u003eCompatible Sensors and Related Parts\u003c\/h2\u003e\u003cp\u003eThe bracket is designed to work with the following sensors and loom, available separately:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMAP Sensor – COD. 55243731C\u003c\/li\u003e\n\u003cli\u003ePick-Up Sensor – COD. 55241321C\u003c\/li\u003e\n\u003cli\u003eMain Wiring loom – COD. FR.163.125\u003c\/li\u003e\n\u003cli\u003eStäubli Sensor (compatibility depends on individual Stäubli setup)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is developed exclusively for the following application:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V2 955 – model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eWorldSSP and track\/race configurations (side-mount installation at battery position)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFR.829.132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSensor bracket – side mount (MAP\/BAP, pick-up, Stäubli)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eBattery location (in place of battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTrackday \/ Racing \/ electronics packaging and cable management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Sensors\u003c\/td\u003e\n\u003ctd\u003e55243731C, 55241321C, Stäubli Sensor (setup-dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038459146,"sku":"FR.829.132","price":82.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HalterPickUPMapStabuli.png?v=1780819962"},{"product_id":"feel-racing-electronics-side-fairing-bracket-kit-ducati-panigale-v2-955-fr-04","title":"Feel Racing Electronics \u0026 Side Fairing Bracket Kit for Ducati Panigale V2 955 (2020-2024) FR.04.KIT","description":"\u003cp\u003eWhen building a Ducati Panigale V2 955 for track use, the quality of the build is measured not just in lap times but in how cleanly and intelligently everything is assembled. The Feel Racing FR.04.KIT brings the kind of purposeful, race-shop craftsmanship to your fairing and electronics layout that separates a professional build from a rushed one — combining an electronics bracket with DZUS quick-release side fairing brackets in a single, cohesive kit designed around the demands of the paddock.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated electronics bracket for a structured, space-efficient installation of electronics and wiring harness routing\u003c\/li\u003e\n\u003cli\u003eSide fairing brackets with DZUS quick-release clips for tool-free removal and refitting of side fairings in seconds\u003c\/li\u003e\n\u003cli\u003eEssential when running an aluminium racing tank — provides the correct mounting and clip interface so the side fairing sits flush and is fully serviceable\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware for a complete, ready-to-fit installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured by Feel Racing, a specialist in race-focused fairing and chassis hardware for Ducati machinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFeel Racing has built its reputation on components that look as precise as they perform. The FR.04.KIT reflects that philosophy: every bracket is engineered with clean lines and a purposeful form that suits the stripped-back aesthetic of a Panigale V2 955 prepared for circuit use. The kit carries the considered design language Feel Racing applies across its race fairing range — nothing superfluous, everything functional.\u003c\/p\u003e\u003cp\u003eThe DZUS quick-release system used on the side fairing brackets is a proven motorsport standard, familiar to anyone who has worked in a professional pit lane. It removes the need for a screwdriver marathon during tyre changes, data checks or rapid repairs, allowing the side fairing to be pulled and refitted without losing a second in the box.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eTrackday and race use demands that every component earns its place. The electronics bracket in this kit gives you a clean, defined location for your electronics package, keeping cabling organised and reducing the risk of chafing or vibration damage over a race weekend. The side fairing bracket system completes the picture: with DZUS clips, any mechanic can access the airbox or electronics bay between sessions without tools, maintaining pit-lane pace throughout the day.\u003c\/p\u003e\u003cp\u003eWhen an aluminium racing tank (COD. 58613271A) is fitted, this kit is essential rather than optional. The standard fairing mounting points are no longer compatible with the Alu-tank configuration, and the FR.04.KIT provides the correct bracket and clip solution to ensure the side fairing fits cleanly and remains serviceable for the duration of the event.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned specifically for the Ducati Panigale V2 955, model years 2020 to 2024. Particularly important when running the aluminium racing tank COD. 58613271A, where the side fairing bracket system becomes a prerequisite for correct fitment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V2 955 — 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eCompatible with Racing Tank (aluminium racing tank) COD. 58613271A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFR.04.KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eElectronics bracket and side fairing bracket kit with DZUS quick-release clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eTrackday, racing, service-focused conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecial Feature\u003c\/th\u003e\n\u003ctd\u003eSide fairing brackets with DZUS quick-release clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Tank\u003c\/th\u003e\n\u003ctd\u003eRacing Tank COD. 58613271A (essential with aluminium racing tank)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038622986,"sku":"FR.04.KIT","price":471.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ElectronisFR04Kit.png?v=1780819973"},{"product_id":"feel-racing-side-wiring-harness-support","title":"Feel Racing Side Wiring Harness Support – Left Frame, Ducati Panigale V2 955 (2020–2024) FR.827.181","description":"\u003cp\u003eIn a serious track or racing conversion, neat cable management is not cosmetic — it determines reliability, serviceability and how quickly your mechanics can work under pressure. The Feel Racing Side Wiring Harness Support (FR.827.181) is a dedicated adhesive-mount bracket plate designed to route and retain the central wiring harness cleanly on the left side of the Ducati Panigale V2 955 frame, exactly where a professional racing build demands it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdhesive bracket plate bonds directly to the left-hand side of the frame for a permanent, vibration-resistant mount\u003c\/li\u003e\n\u003cli\u003eSecures the central wiring harness with cable ties, eliminating harness movement and chafing during high-intensity track use\u003c\/li\u003e\n\u003cli\u003eReduces the risk of wiring faults caused by harness migration or abrasion — critical in a race environment\u003c\/li\u003e\n\u003cli\u003eDramatically improves serviceability: the harness is immediately visible, accessible and clearly routed for rapid pit-lane checks\u003c\/li\u003e\n\u003cli\u003eDesigned to work in combination with the Feel Racing Central Wiring (FR.163.125) for a fully integrated racing wiring solution\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eWhen you strip a Panigale V2 955 back to a genuine race machine, every bracket and routing solution needs to earn its place. The FR.827.181 replaces ad-hoc cable management with a purpose-engineered mounting point. The harness is fixed neatly to the plate using standard cable ties — simple, robust and far more disciplined than improvised solutions. The result is a clean left-frame run with minimal slack, no unwanted harness movement and a build that looks and behaves like factory race-team preparation.\u003c\/p\u003e\u003ch2\u003eServiceability Advantage\u003c\/h2\u003e\u003cp\u003eAt trackdays and race meetings, time in the pits matters. Because the central harness is fixed in a defined position on the left frame rail, any technician can immediately identify routing, locate connectors and carry out checks without tracing cables through a tangled loom. Combined with the Feel Racing Central Wiring FR.163.125, this bracket completes a coherent, professional-grade wiring architecture for the Panigale V2 racing conversion.\u003c\/p\u003e\u003ch2\u003eCompatible Accessory\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eCentral wiring \/ central wiring harness — part number FR.163.125\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned and engineered specifically for the Ducati Panigale V2 955, model years 2020, 2021, 2022, 2023 and 2024. Adhesive mount to the left side of the main frame.\u003c\/p\u003e\u003ch2\u003eInstallation Note\u003c\/h2\u003e\u003cp\u003eFor a reliable and lasting bond, the frame surface must be thoroughly degreased and correctly prepared before application. Allow full cure time in accordance with the adhesive manufacturer's or workshop specifications before subjecting the bracket to load or vibration.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eSide Wiring Harness Support — left frame bracket plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFR.827.181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting method\u003c\/td\u003e\n\u003ctd\u003eAdhesive bond to frame, harness retained with cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eRouting and securing the central wiring harness on the left frame side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eFR.163.125 (Central wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038819594,"sku":"FR.827.181","price":86.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Kabelbaum-HalterRahmen.png?v=1780819984"},{"product_id":"feel-racing-worldssp-tail-support-bracket-ducati-panigale-v2-955","title":"Feel Racing WorldSSP Tail Support Bracket Ducati Panigale V2 955 (2020-2024) 8301C091A","description":"\u003cp\u003eCrafted for race-specification builds where finish and fitment are everything, the Feel Racing Racing Tail Support (8301C091A) brings WorldSSP-derived engineering to the Ducati Panigale V2 955. Designed to bridge the subframe and rear tail section with precision, this bracket is the defining detail that separates a purposeful race conversion from a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated mounting bracket connecting the racing subframe to the rear tail section for a clean, rattle-free installation\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for WorldSSP-specification rear end conversions on the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003eCompatible with Feel Racing racing rear subframe (47112031B) and rear tail kit (FR.495.113) for a complete, cohesive build\u003c\/li\u003e\n\u003cli\u003eOptimised for track day and full racing use, where consistent fitment and swift servicing matter\u003c\/li\u003e\n\u003cli\u003ePrecise part number 8301C091A ensures exact replacement or first-fit confidence when ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFeel Racing has built its reputation supplying fairing systems and structural components to WorldSSP competitors, and every piece in the range carries that lineage. The 8301C091A tail support bracket reflects the same attention to dimensional accuracy and surface quality that you would find on a fully prepared race machine in the pit lane. Where a standard tail section can flex or sit imprecisely when a subframe swap is involved, this bracket establishes a defined, stable connection that holds its position under the stresses of hard track use.\u003c\/p\u003e\u003cp\u003eThe bracket mounts between the racing rear subframe and the rear bumper or tail section, creating a secure interface that keeps the rear bodywork seated correctly lap after lap. For builds that will see regular removal and refitting at the circuit, that repeatable location is an operational advantage as much as an aesthetic one.\u003c\/p\u003e\u003ch2\u003eTrack and Race Application\u003c\/h2\u003e\u003cp\u003eWhether the Panigale V2 955 is being prepared for WorldSSP-class competition or a serious trackday programme, the rear end assembly demands the same rigour as any other safety-critical area. This support bracket is the component that ties the rear conversion together, ensuring the tail section does not shift, vibrate, or require adjustment between sessions. Its inclusion is particularly relevant when the Feel Racing rear tail kit (FR.495.113) is fitted in conjunction with the racing subframe (47112031B), as the three components are designed as a matched system.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe 8301C091A is designed for the following application:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eFor use with Feel Racing racing rear subframe – part number: 47112031B\u003c\/li\u003e\n\u003cli\u003eFor use with Feel Racing rear tail kit – part number: FR.495.113\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number \/ SKU\u003c\/td\u003e\n\u003ctd\u003e8301C091A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent type\u003c\/td\u003e\n\u003ctd\u003eRacing tail support bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting position\u003c\/td\u003e\n\u003ctd\u003eBetween racing subframe and rear tail section \/ rear bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRacing, track day, rear end conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible subframe\u003c\/td\u003e\n\u003ctd\u003e47112031B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible tail kit\u003c\/td\u003e\n\u003ctd\u003eFR.495.113\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169038983434,"sku":"8301C091A","price":94.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Foto09-05-25_135702.webp?v=1780819986"},{"product_id":"ducabike-wing-cover-caps-ducati-streetfighter-v2-955-2022-2024-tca01","title":"Ducabike Wing Cover Caps Ducati Streetfighter V2 955 (2022-2024) – TCA01","description":"\u003cp\u003eListed here is the Wing Cover Caps, Ducabike part TCA01, for 2022-2024 production of the Ducati Streetfighter V2 955. The aim of this page is simple: to show whether TCA01 is the right Ducabike item for your Streetfighter V2 955. Material, scope of delivery and fitting notes for TCA01 follow, all with the Streetfighter V2 955 in mind.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eAnodised finish in gold, red and silver\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eKit of 4 pieces\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original winglets\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter V2 955 (2022-2024)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eTaken from Ducabike's catalogue: TCA01 matches the 2022-2024 Ducati Streetfighter V2 955. Fitment refers to the Ducati Streetfighter V2 955 as delivered by the factory; earlier modifications can change the situation. Ducabike's fitment for TCA01 is limited to the Ducati Streetfighter V2 955; do not assume it fits related models. If you are shopping for Ducati Streetfighter V4, Ducati Streetfighter V4 S, please use the TCA01 page for that motorcycle. A fitment question about TCA01 costs you nothing and avoids an unnecessary return.\u003c\/p\u003e\u003ch2\u003eEveryday Care\u003c\/h2\u003e\u003cp\u003ePat TCA01 dry instead of rubbing, especially on visible surfaces. A regular wash of the whole motorcycle is an easy way to keep TCA01 looking good. Keep a record of when you last checked TCA01, alongside the motorcycle's service history.\u003c\/p\u003e\u003ch2\u003ePurpose and Function\u003c\/h2\u003e\u003cp\u003eRiders who take off the factory wings can fit TCA01 in their place to change the appearance. Ducabike describes TCA01 as plug and play, so it can be fitted without altering any part of the bike.\u003c\/p\u003e\u003ch2\u003eBefore You Fit It\u003c\/h2\u003e\u003cp\u003eAt the winglet mounts of the fairing, TCA01 replaces the original winglets as specified by Ducabike. To change over, remove the original winglets at the winglet mounts of the fairing and install TCA01. Quantity supplied with TCA01: one set consisting of several parts. Keep removed original parts and screws in a safe place in case you need them later. Ducabike provides a PDF with fitting instructions for TCA01; you will find it under the Downloads tab.\u003c\/p\u003e\u003ch2\u003eColour Matching\u003c\/h2\u003e\u003cp\u003eTo match TCA01 with other parts on your motorcycle, compare its colour (gold, red and silver) with them.\u003c\/p\u003e\u003ch2\u003eMaterials Used\u003c\/h2\u003e\u003cp\u003eMetal parts on a motorcycle face rain, road dirt and vibration; the aluminium of TCA01 is suited to those conditions. Aluminium has a fraction of the density of steel, which makes TCA01 pleasant to handle during fitting. Ducabike takes the properties of aluminium into account when designing TCA01.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003eApproval documents such as ABE or parts certificate cannot be obtained for TCA01 from Ducabike. Make sure the use of TCA01 complies with your local road traffic regulations. Whether TCA01 may be used on public roads depends on the law of your country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCA01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Gold, red and silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V2 955 (2022-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Gold","offer_id":54110349820170,"sku":"TCA01B","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54110349852938,"sku":"TCA01A","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Silver","offer_id":54110349885706,"sku":"TCA01E","price":220.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tca01a_1.png?v=1794441918"},{"product_id":"ducabike-wing-cover-caps-ducati-streetfighter-v4-2020-2024-tca01","title":"Ducabike Wing Cover Caps Ducati Streetfighter V4 (2020-2024) – TCA01","description":"\u003cp\u003eThe Ducabike catalogue matches number TCA01, the Wing Cover Caps, to the Ducati Streetfighter V4 (2020-2024). Nothing in this description goes beyond what Ducabike states about TCA01 and the Ducati Streetfighter V4. What sets this listing apart is its focus: one part, TCA01, and one motorcycle, the Streetfighter V4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in gold, red and silver\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eKit of 4 pieces\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eReplaces the original winglets, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare Guide\u003c\/h2\u003e\u003cp\u003ePressure washers can force water into gaps, so keep the nozzle well away from TCA01. Damage from a fall is not always obvious, so look at TCA01 closely after any tip-over. Hot weather or cold, the basic care routine for TCA01 stays the same.\u003c\/p\u003e\u003ch2\u003eMatching Motorcycle\u003c\/h2\u003e\u003cp\u003eDucabike's application data assign TCA01 to the 2020-2024 Ducati Streetfighter V4. Look for the type designation in your documents if you are unsure that you own the Ducati Streetfighter V4. Check before ordering that your Streetfighter V4 corresponds to the version named in the title. For Ducati Streetfighter V2 955, Ducati Streetfighter V4 S, the same TCA01 has its own listing in the Inter-Pace shop. Already own other Ducabike parts? Their numbers and TCA01 can be compared on the Ducabike website.\u003c\/p\u003e\u003ch2\u003ePick a Colour\u003c\/h2\u003e\u003cp\u003ePersonalising a motorcycle with colour is easy with TCA01 in gold, red and silver.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eTCA01 replaces the standard winglets for riders who want to remove them and change the look of the bike. Ducabike describes TCA01 as plug and play, so it can be fitted without altering any part of the bike.\u003c\/p\u003e\u003ch2\u003eInstallation and Safety\u003c\/h2\u003e\u003cp\u003eDucabike has engineered TCA01 to take over from the original winglets at the winglet mounts of the fairing. At the winglet mounts of the fairing, the work consists of taking off the original winglets and putting TCA01 on. Your package of TCA01 contains a kit with several pieces. Do not use impact drivers on the fixings of TCA01; a hand tool gives better control. If a step in fitting TCA01 is unclear, look it up in the Ducabike document first.\u003c\/p\u003e\u003ch2\u003eWhat Goes Into It\u003c\/h2\u003e\u003cp\u003eAluminium responds well to surface treatments, so the finish of TCA01 can be applied evenly. Ducabike processes the aluminium for TCA01 into its final shape before the surface is finished. Choosing aluminium for TCA01 was a technical decision first and a visual one second.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eDucabike delivers TCA01 without any ABE or similar paperwork. For road use, the decisive question is whether TCA01 meets the requirements of your national law. National regulations, insurance terms and inspection practice all play a role when TCA01 is used on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCA01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Gold, red and silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Gold","offer_id":54110349918474,"sku":"TCA01B","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54110349951242,"sku":"TCA01A","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Silver","offer_id":54110349984010,"sku":"TCA01E","price":220.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tca01a_1.png?v=1794441918"},{"product_id":"ducabike-wing-cover-caps-ducati-streetfighter-v4-s-2020-2024-tca01","title":"Ducabike Wing Cover Caps Ducati Streetfighter V4 S (2020-2024) – TCA01","description":"\u003cp\u003eThe Ducati Streetfighter V4 S (2020-2024) gets its own Ducabike listing here: the Wing Cover Caps, number TCA01. There is a reason this page names a single motorcycle: Ducabike links TCA01 to the Streetfighter V4 S through its compatibility data. If your Streetfighter V4 S already carries other Ducabike items, TCA01 comes from the same Italian manufacturer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eKit of 4 pieces\u003c\/li\u003e\n\u003cli\u003eAnodised finish in gold, red and silver\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eReplaces the original winglets, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003ePDF fitting instructions in the Downloads tab\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare Guide\u003c\/h2\u003e\u003cp\u003eDo not let cleaning foam dry on TCA01; rinse it off while it is still wet. Garages with fertiliser, salt or chemicals stored nearby are not ideal for TCA01. A brief look at TCA01 from time to time takes seconds and shows whether everything is in order.\u003c\/p\u003e\u003ch2\u003eRole and Purpose\u003c\/h2\u003e\u003cp\u003eTCA01 replaces the standard winglets for riders who want to remove them and change the look of the bike. Ducabike describes TCA01 as plug and play, so it can be fitted without altering any part of the bike.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eA thin natural oxide layer shields aluminium from corrosion, one reason Ducabike uses it for TCA01. Aluminium copes well with heat, rain and vibration, the everyday conditions TCA01 has to face. Small details on TCA01 show how carefully Ducabike works with aluminium.\u003c\/p\u003e\u003ch2\u003eBefore You Order\u003c\/h2\u003e\u003cp\u003eThe fitment of TCA01 covers the Ducati Streetfighter V4 S (2020-2024) according to the Italian manufacturer. Your Streetfighter V4 S should match the listing in both name and year before you order. Special editions of the Streetfighter V4 S may differ, so compare their details with Ducabike's fitment before ordering. Ducabike gives Ducati Streetfighter V2 955, Ducati Streetfighter V4 as further motorcycles for TCA01. Compare TCA01 with any Ducabike instructions or invoices you may already have.\u003c\/p\u003e\u003ch2\u003eColour and Variant\u003c\/h2\u003e\u003cp\u003eThink about the colours already on your motorcycle before choosing TCA01 in gold, red and silver.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eStart by taking off the original winglets at the winglet mounts of the fairing; TCA01 then goes into the free position. With the original winglets set aside, TCA01 is mounted at the winglet mounts of the fairing. Inside the package is the full set that makes up TCA01. Fit TCA01 in a dry place, out of wind and dust. Instructions in PDF form for TCA01 are available in the Downloads section.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003eWithout approval documents from the manufacturer, TCA01 is supplied as it is. Outside Germany, other inspection bodies and rules apply to TCA01. Approval rules for accessories are set nationally, so check them for TCA01.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCA01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Gold, red and silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Gold","offer_id":54110350049546,"sku":"TCA01B","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54110350082314,"sku":"TCA01A","price":220.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Silver","offer_id":54110350115082,"sku":"TCA01E","price":220.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tca01a_1.png?v=1794441918"},{"product_id":"ducabike-mirror-hole-cover-kit-aprilia-rs-660-2020-2026-tcs02","title":"Ducabike Mirror Hole Cover Kit Aprilia RS 660 (2020-2026) – TCS02","description":"\u003cp\u003eItem TCS02 in the Ducabike range is the Mirror Hole Cover Kit made for the 2020-2026 RS 660. On the following lines you will find the facts Ducabike provides about TCS02, put into context for the RS 660. As a rider of the RS 660, you will find the key facts about TCS02 grouped by topic below.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eKeeps dirt, dust and rain out\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eCloses the mirror holes when mirrors are removed\u003c\/li\u003e\n\u003cli\u003eHardware and rubber gasket included\u003c\/li\u003e\n\u003cli\u003eFits the original fairing precisely\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit\u003c\/li\u003e\n\u003cli\u003eMade to fit the Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and Scope of Delivery\u003c\/h2\u003e\u003cp\u003eNothing has to come off for good: TCS02 simply joins the existing parts in the mirror holes of the fairing. The mounting position of TCS02 is in the mirror holes of the fairing; there is no original part it takes over from. The TCS02 set is delivered complete, as compiled by Ducabike. Magnetic trays or small boxes keep screws sorted while TCS02 goes on. A printout of the Downloads PDF next to you makes fitting TCS02 easier to follow.\u003c\/p\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eThe light metal of TCS02 feels solid in the hand and still keeps the weight on the motorcycle low. Aluminium alloy was selected by Ducabike for TCS02, since the metal can be worked into fine shapes without becoming heavy. Each surface of TCS02 has been given the attention that a visible motorcycle part deserves.\u003c\/p\u003e\u003ch2\u003eDesigned Purpose\u003c\/h2\u003e\u003cp\u003eTCS02 removes the open-hole effect that remains in the fairing once the stock mirrors come off. Dirt, dust and rainwater are kept out of the fairing holes by TCS02.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eCleaning TCS02 regularly is easier than removing old, baked-on dirt. If road salt reaches TCS02, rinse it off with clean water as soon as possible. Check TCS02 after transport by van or trailer, as straps and movement can cause rubbing.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eDucabike's application data assign TCS02 to the 2020-2026 Aprilia RS 660. Orders for a motorcycle other than the Aprilia RS 660 cannot be covered by this fitment. No other motorcycle than the Aprilia RS 660 (2020-2026) is covered here, however similar it may look. In addition to this page, TCS02 can be ordered for Aprilia RS 660 Factory, Aprilia RSV4 1100, Aprilia RSV4 1100 Factory. Using TCS02 as a search term on the Ducabike website brings up the original product entry. TCS02 is only needed if the original mirrors have been removed, for example for aftermarket mirrors or track use.\u003c\/p\u003e\u003ch2\u003eColour Overview\u003c\/h2\u003e\u003cp\u003eScreens show colours differently, so TCS02 in black and red may look slightly different in reality.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eApproval documents for TCS02 are not part of the delivery, as Ducabike does not issue them. The legal assessment of TCS02 is up to the authorities and testing bodies in your country. Find out before fitting TCS02 what your national regulations require.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCS02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112948289802,"sku":"TCS02D","price":82.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112948322570,"sku":"TCS02A","price":82.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tcs02d_1.png?v=1794464672"},{"product_id":"ducabike-mirror-hole-cover-kit-aprilia-rs-660-factory-2025-2026-tcs02","title":"Ducabike Mirror Hole Cover Kit Aprilia RS 660 Factory (2025-2026) – TCS02","description":"\u003cp\u003eYour Aprilia RS 660 Factory (2025-2026) is the motorcycle behind this listing of the Ducabike Mirror Hole Cover Kit TCS02. Whether you are restoring standard details or personalising your RS 660 Factory, the information here helps you judge TCS02. Inter-Pace sells TCS02 as an individual product per motorcycle, so this page belongs to the RS 660 Factory alone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eHardware and rubber gasket included\u003c\/li\u003e\n\u003cli\u003eKeeps dirt, dust and rain out\u003c\/li\u003e\n\u003cli\u003eCloses the mirror holes when mirrors are removed\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFits the original fairing precisely\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Aprilia RS 660 Factory (2025-2026)\u003c\/li\u003e\n\u003cli\u003ePDF fitting instructions in the Downloads tab\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eIn the mirror holes of the fairing, TCS02 adds a part that was not there before. There is no stock counterpart to TCS02; it is fitted in the mirror holes of the fairing as an extra. Everything that belongs to the TCS02 kit is in the same delivery. Clean your hands before handling TCS02, so that no oil ends up on visible surfaces. With the Downloads PDF from Ducabike, your workshop has the manufacturer's instructions for TCS02.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eTo match TCS02 with other parts on your motorcycle, compare its colour (black and red) with them.\u003c\/p\u003e\u003ch2\u003eCare Guide\u003c\/h2\u003e\u003cp\u003eDry TCS02 gently after washing so that no water marks remain. Covering the motorcycle loosely allows moisture to escape, which is good for TCS02. Riding through mud or gravel? Rinse TCS02 afterwards before the dirt hardens.\u003c\/p\u003e\u003ch2\u003ePractical Details\u003c\/h2\u003e\u003cp\u003eTCS02 removes the open-hole effect that remains in the fairing once the stock mirrors come off. TCS02 also stops dirt, dust and rain from getting into the mirror holes.\u003c\/p\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\u003cp\u003eDucabike names TCS02 as suitable for the Aprilia RS 660 Factory from 2025-2026. No other motorcycle than the Aprilia RS 660 Factory (2025-2026) is covered here, however similar it may look. If your RS 660 Factory was built outside 2025-2026, this listing does not apply to it. Identical part, different motorcycle: TCS02 is also offered for Aprilia RS 660, Aprilia RSV4 1100, Aprilia RSV4 1100 Factory. Unusual versions or conversions are worth a question about TCS02 to Inter-Pace. TCS02 is only needed if the original mirrors have been removed, for example for aftermarket mirrors or track use.\u003c\/p\u003e\u003ch2\u003eMaterial and Finish\u003c\/h2\u003e\u003cp\u003eOn TCS02, the aluminium base allows sharp edges, clean faces and accurate holes. Aluminium alloy forms the structure of TCS02, chosen for its favourable strength-to-weight ratio. Ducabike designs TCS02 around the strengths of aluminium rather than forcing a shape onto it.\u003c\/p\u003e\u003ch2\u003eRegistration and Approval\u003c\/h2\u003e\u003cp\u003eNeither an ABE nor an expert opinion is available from Ducabike for TCS02. Depending on where you live, fitting TCS02 may require an inspection or an entry in the papers. Insurance cover can also depend on modifications; check with your insurer if needed.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCS02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia RS 660 Factory (2025-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112948683018,"sku":"TCS02D","price":82.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112948715786,"sku":"TCS02A","price":82.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tcs02d_1.png?v=1794464672"},{"product_id":"ducabike-mirror-hole-cover-kit-aprilia-rsv4-1100-2025-2026-tcs02","title":"Ducabike Mirror Hole Cover Kit Aprilia RSV4 1100 (2025-2026) – TCS02","description":"\u003cp\u003eAccording to Ducabike, the Aprilia RSV4 1100 built 2025-2026 is a match for reference TCS02, called the Mirror Hole Cover Kit. Inter-Pace keeps the RSV4 1100 listing for TCS02 separate from other motorcycles, which makes the fitment check easier. On the following lines you will find the facts Ducabike provides about TCS02, put into context for the RSV4 1100.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eHardware and rubber gasket included\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eKeeps dirt, dust and rain out\u003c\/li\u003e\n\u003cli\u003eCloses the mirror holes when mirrors are removed\u003c\/li\u003e\n\u003cli\u003eFits the original fairing precisely\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Aprilia RSV4 1100, 2025-2026\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade From\u003c\/h2\u003e\u003cp\u003eAluminium can be machined to close tolerances, which helps TCS02 line up with its mounting points. Aluminium alloy forms the structure of TCS02, chosen for its favourable strength-to-weight ratio. Surface treatment gives the aluminium of TCS02 a consistent look across the whole part.\u003c\/p\u003e\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\u003cp\u003eRather than exchanging anything, you mount TCS02 in the mirror holes of the fairing. No original part has to be given up, because TCS02 is added in the mirror holes of the fairing. Ordering TCS02 gets you the complete Ducabike set in one go. After fitting TCS02, move all nearby controls through their full range and check for contact. Under Downloads you can save the installation PDF for TCS02 to your phone or computer.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eDried-on dirt comes off TCS02 more easily if you soften it with water first. Do not use TCS02 as a step, handle or support unless it is designed for that. Seasonal checks are a good moment to look closely at TCS02.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eTCS02 removes the open-hole effect that remains in the fairing once the stock mirrors come off. TCS02 also stops dirt, dust and rain from getting into the mirror holes.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eDucabike states fitment of TCS02 for the 2025-2026 Aprilia RSV4 1100. Comparing your bike with the photos is no substitute for checking that it is the Aprilia RSV4 1100 (2025-2026). When the year of your RSV4 1100 sits at the edge of 2025-2026, take an extra moment to confirm it. Ducabike confirms TCS02 for Aprilia RS 660, Aprilia RS 660 Factory, Aprilia RSV4 1100 Factory as well as for the motorcycle on this page. A fitment question about TCS02 costs you nothing and avoids an unnecessary return. TCS02 is only needed if the original mirrors have been removed, for example for aftermarket mirrors or track use.\u003c\/p\u003e\u003ch2\u003eChoosing a Colour\u003c\/h2\u003e\u003cp\u003eMatching TCS02 to the wheels or the frame is easy when you choose from black and red.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eDucabike delivers TCS02 without any ABE or similar paperwork. Track use and road use are treated differently by law; check which rules apply to TCS02 in your case. Inter-Pace cannot assess the approval situation in every country, so please check locally for TCS02.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCS02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia RSV4 1100 (2025-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112949141770,"sku":"TCS02D","price":82.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112949174538,"sku":"TCS02A","price":82.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tcs02d_1.png?v=1794464672"},{"product_id":"ducabike-mirror-hole-cover-kit-aprilia-rsv4-1100-factory-2025-2026-tcs02","title":"Ducabike Mirror Hole Cover Kit Aprilia RSV4 1100 Factory (2025-2026) – TCS02","description":"\u003cp\u003eThis listing joins the Ducabike Mirror Hole Cover Kit TCS02 with exactly one motorcycle, the Aprilia RSV4 1100 Factory (2025-2026). Ducabike gives every accessory its own number, and TCS02 is the one recorded for the RSV4 1100 Factory application. Ducabike builds parts for a wide range of Italian and other European motorcycles; for the RSV4 1100 Factory this page deals with TCS02.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eCloses the mirror holes when mirrors are removed\u003c\/li\u003e\n\u003cli\u003ePlug and play fitting\u003c\/li\u003e\n\u003cli\u003eHardware and rubber gasket included\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eKeeps dirt, dust and rain out\u003c\/li\u003e\n\u003cli\u003eFits the original fairing precisely\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eMade to fit the Aprilia RSV4 1100 Factory (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eOffered in black and red, TCS02 may match a factory livery or contrast with it.\u003c\/p\u003e\u003ch2\u003eInstallation and Safety\u003c\/h2\u003e\u003cp\u003eInstalling TCS02 in the mirror holes of the fairing enlarges the motorcycle's equipment instead of replacing it. Ducabike offers TCS02 as an extra in the mirror holes of the fairing, something the factory does not fit. One order of TCS02 brings the complete set of parts. Brake cleaner or a degreaser on a cloth removes oil from contact faces before TCS02 goes on. Along with this page, Ducabike's PDF instructions for TCS02 are provided under Downloads.\u003c\/p\u003e\u003ch2\u003eWill It Fit Your Bike?\u003c\/h2\u003e\u003cp\u003eThe compatibility entry for TCS02 reads Aprilia RSV4 1100 Factory (2025-2026) in the Ducabike catalogue. Have your registration certificate at hand and compare its entries with the Aprilia RSV4 1100 Factory and 2025-2026. Your RSV4 1100 Factory should match the listing in both name and year before you order. With Aprilia RS 660, Aprilia RS 660 Factory, Aprilia RSV4 1100 in its compatibility list, TCS02 is sold on more than one Inter-Pace page. Please contact Inter-Pace with TCS02 if the fitting area on your motorcycle looks different from the photos. TCS02 is only needed if the original mirrors have been removed, for example for aftermarket mirrors or track use.\u003c\/p\u003e\u003ch2\u003eFunction in Detail\u003c\/h2\u003e\u003cp\u003eIf the original mirrors are removed, TCS02 closes the open holes in the fairing for a finished look. Dirt, dust and rainwater are kept out of the fairing holes by TCS02.\u003c\/p\u003e\u003ch2\u003eMaintenance\u003c\/h2\u003e\u003cp\u003eA mild, pH-neutral cleaner suits the aluminium of TCS02. Transport the motorcycle with straps placed well away from TCS02. Covering the motorcycle loosely allows moisture to escape, which is good for TCS02.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cp\u003eRiders who value low weight will appreciate that TCS02 is made of aluminium. As an aluminium part, TCS02 cannot rust the way untreated steel does. Material and workmanship together decide how TCS02 ages, and Ducabike pays attention to both.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003eFor TCS02, the manufacturer has no German ABE and no parts report. Before riding with TCS02 in traffic, find out what your national road traffic law says. Local rules determine if an entry in the papers is needed once TCS02 is fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TCS02\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia RSV4 1100 Factory (2025-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54112949469450,"sku":"TCS02D","price":82.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54112949502218,"sku":"TCS02A","price":82.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-tcs02d_1.png?v=1794464672"},{"product_id":"ducabike-vertical-air-intake-cover-ducati-xdiavel-2016-2024-cav01","title":"Ducabike Vertical Air Intake Cover Ducati XDiavel (2016-2024) – CAV01","description":"\u003cp\u003eWith reference CAV01, Ducabike supplies its Vertical Air Intake Cover for the Ducati XDiavel, built 2016-2024. Read on for material, delivery contents, fitment and approval notes on CAV01 for the XDiavel. The following overview of CAV01 is written for XDiavel riders who want to know exactly what they are ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMulti-material construction\u003c\/li\u003e\n\u003cli\u003ePlug and play\u003c\/li\u003e\n\u003cli\u003eFitted with a mesh insert\u003c\/li\u003e\n\u003cli\u003eSupplied as shown in the photos\u003c\/li\u003e\n\u003cli\u003eAvailable in black and red\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original plastic air intake\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati XDiavel (2016-2024)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat Goes Into It\u003c\/h2\u003e\u003cp\u003eThe construction of CAV01 brings together materials with complementary properties. More than one material goes into CAV01, and each one has a defined task. Consistent production quality means each piece of CAV01 leaves Ducabike in the same condition.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eKeep high-pressure water jets at a distance from CAV01. Chain spray and other lubricants should not reach CAV01; wipe off any overspray at once. Temperature changes are normal for motorcycle parts; simply keep CAV01 clean and dry.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eDucabike specifies the 2016-2024 Ducati XDiavel as the motorcycle for CAV01. Fitment refers to the Ducati XDiavel as delivered by the factory; earlier modifications can change the situation. Make sure your motorcycle is identical to the Ducati XDiavel listed here before you place the order. Ducabike confirms CAV01 for Ducati XDiavel Dark as well as for the motorcycle on this page. Already own other Ducabike parts? Their numbers and CAV01 can be compared on the Ducabike website.\u003c\/p\u003e\u003ch2\u003eColour Variants\u003c\/h2\u003e\u003cp\u003eColour is chosen with the variant: CAV01 comes in black and red.\u003c\/p\u003e\u003ch2\u003eThe Part in Use\u003c\/h2\u003e\u003cp\u003eCAV01 takes the place of the original plastic air intake cover. With its mesh insert, CAV01 covers the intake while letting the air flow through it.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eDucabike offers CAV01 as an alternative to the original plastic air intake on the vertical air intake. Taking over the role of the original plastic air intake, CAV01 is fitted on the vertical air intake. Contents of CAV01: please go by the pictures on this page. Hold parts in position by hand before tightening anything, to make sure everything lines up. A printout of the Downloads PDF next to you makes fitting CAV01 easier to follow.\u003c\/p\u003e\u003ch2\u003eLegal Situation\u003c\/h2\u003e\u003cp\u003eDucabike delivers CAV01 without any ABE or similar paperwork. Before riding with CAV01 in traffic, find out what your national road traffic law says. Legal advice on CAV01 is outside what Inter-Pace can offer; a local authority or testing body can help.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e CAV01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Mixed materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e As pictured\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati XDiavel (2016-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54116598317322,"sku":"DBK-CAV01D","price":103.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54116598350090,"sku":"DBK-CAV01A","price":103.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-cav01d_1.png?v=1794482606"},{"product_id":"ducabike-vertical-air-intake-cover-ducati-xdiavel-dark-2021-2024-cav01","title":"Ducabike Vertical Air Intake Cover Ducati XDiavel Dark (2021-2024) – CAV01","description":"\u003cp\u003eYour Ducati XDiavel Dark (2021-2024) is the motorcycle behind this listing of the Ducabike Vertical Air Intake Cover CAV01. Ducabike supplies CAV01 through specialist dealers such as Inter-Pace, here specifically for the XDiavel Dark. The XDiavel Dark has its own entry in the Ducabike list for CAV01, which is why the part is offered here.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade from several materials\u003c\/li\u003e\n\u003cli\u003ePlug and play\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eFitted with a mesh insert\u003c\/li\u003e\n\u003cli\u003eSupplied as shown in the photos\u003c\/li\u003e\n\u003cli\u003eReplaces the original plastic air intake, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati XDiavel Dark (2021-2024)\u003c\/li\u003e\n\u003cli\u003eDucabike fitting guide available as PDF download\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGetting It Fitted\u003c\/h2\u003e\u003cp\u003eAfter removing the original plastic air intake on the vertical air intake, fit CAV01 using the same mounting points. Mounting CAV01 on the vertical air intake means saying goodbye to the original plastic air intake. Scroll through the images to check the contents of CAV01 before ordering. A small mirror and a torch help you see hidden screws around CAV01. If you are unsure about a step, the Ducabike PDF under Downloads shows the intended way to fit CAV01.\u003c\/p\u003e\u003ch2\u003eColour Variants\u003c\/h2\u003e\u003cp\u003ePick CAV01 in black and red to repeat a colour that already appears on your motorcycle.\u003c\/p\u003e\u003ch2\u003eFunction and Details\u003c\/h2\u003e\u003cp\u003eThe stock plastic part on the air intake is replaced by CAV01. With its mesh insert, CAV01 covers the intake while letting the air flow through it.\u003c\/p\u003e\u003ch2\u003eMaterial and Construction\u003c\/h2\u003e\u003cp\u003eUsing a combination of materials, Ducabike gives CAV01 the right properties in each area. Material combinations are common in modern motorcycle parts, and CAV01 is built that way. Next to original equipment, CAV01 holds its own thanks to the materials and the way it is finished.\u003c\/p\u003e\u003ch2\u003eCompatibility Check\u003c\/h2\u003e\u003cp\u003eThe motorcycle named for CAV01 on this page is the Ducati XDiavel Dark (2021-2024), following Ducabike. No other motorcycle than the Ducati XDiavel Dark (2021-2024) is covered here, however similar it may look. Variants of the XDiavel Dark can differ in detail, so check the exact version against this listing. Riding Ducati XDiavel instead? Inter-Pace offers CAV01 on separate pages by motorcycle. The reference CAV01 in the product title is the same one Ducabike uses.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eA mild, pH-neutral cleaner suits the materials of CAV01. Keep a record of when you last checked CAV01, alongside the motorcycle's service history. A charger cable or tie-down strap resting on CAV01 can leave marks over time.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eNeither an ABE nor an expert opinion is available from Ducabike for CAV01. Inform yourself about the legal situation in your country before CAV01 is used on public roads. Ask an approved inspector before your next roadworthiness test whether CAV01 raises any questions.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e CAV01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Mixed materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e As pictured\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati XDiavel Dark (2021-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54116598645002,"sku":"DBK-CAV01D","price":103.73,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54116598677770,"sku":"DBK-CAV01A","price":103.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-cav01d_1.png?v=1794482606"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-aprilia-caponord-1200-2013-2016-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Aprilia Caponord 1200 (2013-2016) – MRA12","description":"\u003cp\u003eCNC Racing supplies its Mirror Blanking Plug M10 Left-Hand Thread as MRA12 for the Aprilia Caponord 1200 (2013-2016). Inter-Pace lists MRA12 separately for each motorcycle, and this page is the one for the Caponord 1200. The following sections cover material, fitting, care and legal points for MRA12 on the Caponord 1200.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eMade to fit the Aprilia Caponord 1200 (2013-2016)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFunction Explained\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eMaterial Overview\u003c\/h2\u003e\u003cp\u003eCNC Racing chose aluminium for MRA12, combining low weight with sufficient strength. Light alloy is what CNC Racing has chosen for MRA12. A clean finish completes MRA12 after the shaping process.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eAs an extra part, MRA12 is mounted in the mirror mounting hole of the handlebar. The installation of MRA12 in the mirror mounting hole of the handlebar leaves all original parts in place. Inside the box there is a single MRA12. If you lack the tools or experience for MRA12, leave the job to a workshop. Do not force MRA12 into position; if it does not fit, check the cause.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003eLeave out aggressive chemicals when cleaning MRA12. Check MRA12 again after the first rides to see that it is still firmly in place. Note any change in how MRA12 sits or works and have it checked.\u003c\/p\u003e\u003ch2\u003eMatching Your Bike\u003c\/h2\u003e\u003cp\u003eWhen it comes to MRA12, CNC Racing counts the Aprilia Caponord 1200 (2013-2016) as a fitting model. Please make sure your Caponord 1200 has not been fitted with parts that change the mounting area of MRA12. Owners should verify that their Caponord 1200 is in standard form where MRA12 is mounted. Look for MRA12 under your model name if your motorcycle is listed here: Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, BMW F 800 GS Adventure. For a reliable answer on MRA12, give us the exact model designation from your papers. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003eThe colour range of MRA12 covers black and red.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eWithout ABE or parts certificate from CNC Racing, MRA12 is sold as an accessory part. If you plan to ride on public roads with MRA12, check the legal requirements first. Find out about the requirements for MRA12 in your country before road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia Caponord 1200 (2013-2016)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157160218890,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157160251658,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-aprilia-dorsoduro-1200-2010-2015-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Aprilia Dorsoduro 1200 (2010-2015) – MRA12","description":"\u003cp\u003eCNC Racing has assigned item MRA12 (Mirror Blanking Plug M10 Left-Hand Thread) to its fitment list for the Aprilia Dorsoduro 1200, produced 2010-2015. Everything relevant to MRA12 on the Dorsoduro 1200 is summarised further down: material, scope of delivery and road use. CNC Racing works with model-specific data, which is why the Dorsoduro 1200 has its own listing for MRA12.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Aprilia Dorsoduro 1200, 2010-2015\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eMaterial Profile\u003c\/h2\u003e\u003cp\u003eCNC Racing shapes MRA12 out of aluminium by CNC machining. The aluminium construction of MRA12 keeps the added weight small. For MRA12, material selection and manufacturing go hand in hand.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eAs an extra part, MRA12 is mounted in the mirror mounting hole of the handlebar. MRA12 is added in the mirror mounting hole of the handlebar without removing any original part. Every order of MRA12 includes one part. Thread locker may be needed on some fixings of MRA12; check the manufacturer's recommendations. Photos taken before dismantling help you when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eRemove insects and tar from MRA12 with a product meant for motorcycles. Spare a minute for MRA12 during each service interval. Have a look at MRA12 whenever you check tyre pressure or chain.\u003c\/p\u003e\u003ch2\u003eWhich Bike It Suits\u003c\/h2\u003e\u003cp\u003eThe CNC Racing fitment for MRA12 names the Aprilia Dorsoduro 1200 (2010-2015). A quick look at the type designation on your papers shows whether the Aprilia Dorsoduro 1200 entry applies to you. Look at the year of manufacture of your Dorsoduro 1200 and check it against 2010-2015. Besides this bike, MRA12 suits Aprilia Caponord 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, BMW F 800 GS Adventure, each shown on its own page. Fitment information for MRA12 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eMRA12 is listed with this colour range: black and red.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eInter-Pace cannot hand over an ABE for MRA12: CNC Racing simply has none. Before road use, find out whether MRA12 has to be registered in your country. Whether an individual inspection of MRA12 is possible depends on the testing body.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia Dorsoduro 1200 (2010-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157162053898,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157162086666,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-aprilia-tuono-v4-1100-factory-2015-2020-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Aprilia Tuono V4 1100 Factory (2015-2020) – MRA12","description":"\u003cp\u003eIdentified by MRA12, the CNC Racing item described as Mirror Blanking Plug M10 Left-Hand Thread can be ordered here for the Aprilia Tuono V4 1100 Factory (2015-2020). Frequent queries on MRA12 and the Tuono V4 1100 Factory get their answers further down. A clear overview of MRA12 for the Tuono V4 1100 Factory follows: construction, scope, fitting and care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eMade to fit the Aprilia Tuono V4 1100 Factory (2015-2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eSoft cloths and neutral cleaners are all MRA12 needs for routine care. Keep an eye on MRA12 after any tip-over in the garage. Have a look at MRA12 whenever you check tyre pressure or chain.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eMRA12 is available in black and red; select your version with the colour option.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eFor MRA12, CNC Racing works with aluminium, which machines cleanly and holds tight tolerances. CNC Racing shapes MRA12 out of aluminium by CNC machining. CNC Racing finishes MRA12 so that edges and surfaces are smooth.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eIn the CNC Racing application chart, MRA12 is linked to the Aprilia Tuono V4 1100 Factory (2015-2020). Race-converted examples of the Tuono V4 1100 Factory may no longer have the parts MRA12 is designed around. Our advice: take a photo of the mounting area on your Tuono V4 1100 Factory and compare it with the images of MRA12. Look for MRA12 under your model name if your motorcycle is listed here: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 RR, BMW F 800 GS Adventure. Inter-Pace is happy to answer fitment questions about MRA12. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eContents and Fitting\u003c\/h2\u003e\u003cp\u003eMRA12 complements the motorcycle in the mirror mounting hole of the handlebar. CNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. MRA12 is sold individually. Handle MRA12 carefully before fitting to avoid scratches. Fitting MRA12 calls for basic mechanical skills and suitable tools.\u003c\/p\u003e\u003ch2\u003eTechnical Function\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eFor MRA12, no ABE or Teilegutachten is available from the maker CNC Racing. Inter-Pace cannot give legal advice on MRA12; your authority or testing body can. In Germany, an inspection by an approved testing body may allow MRA12 to be entered in the vehicle papers.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia Tuono V4 1100 Factory (2015-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157163561226,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157163593994,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-aprilia-tuono-v4-1100-rr-2015-2020-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Aprilia Tuono V4 1100 RR (2015-2020) – MRA12","description":"\u003cp\u003eFeatured here: MRA12, the Mirror Blanking Plug M10 Left-Hand Thread that CNC Racing lists against the Aprilia Tuono V4 1100 RR (2015-2020). Further down you can read which material CNC Racing chose for MRA12 and how it goes on the Tuono V4 1100 RR. Everything relevant to MRA12 on the Tuono V4 1100 RR is summarised further down: material, scope of delivery and road use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Aprilia Tuono V4 1100 RR (2015-2020)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003eMRA12 can be ordered in black and red.\u003c\/p\u003e\u003ch2\u003eFitment at a Glance\u003c\/h2\u003e\u003cp\u003eThe fitment check for MRA12 leads to the Aprilia Tuono V4 1100 RR (2015-2020) in CNC Racing's data. If your Tuono V4 1100 RR has been modified, check that the area where MRA12 sits is still in original condition. Have a look at the build date of your Tuono V4 1100 RR; it should fall inside 2015-2020. Further fitments of MRA12 according to CNC Racing include Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, BMW F 800 GS Adventure. For a reliable answer on MRA12, give us the exact model designation from your papers. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFunction Explained\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eAluminium, the material of MRA12, can be machined to fine detail. CNC Racing trusts aluminium for MRA12, a metal that keeps its shape under load. Production of MRA12 follows a consistent process at CNC Racing.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eCNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. MRA12 complements the motorcycle in the mirror mounting hole of the handlebar. Every order of MRA12 includes one part. Protect painted surfaces near MRA12 with tape or a cloth during fitting. Use a torque wrench so that every fixing of MRA12 ends up equally tight.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eMRA12 is easy to clean with a soft sponge and a gentle cleaning product. In storage, keep MRA12 away from direct heat sources. Clean MRA12 before storing the motorcycle for longer periods.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eApproval papers, whether ABE or parts certificate, are not provided by CNC Racing for MRA12. In some countries MRA12 can be used without further paperwork, in others it cannot. Riders outside Germany should check national rules for MRA12 as well.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Aprilia Tuono V4 1100 RR (2015-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157164904714,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157164937482,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-bmw-f-800-gs-adventure-2008-2015-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread BMW F 800 GS Adventure (2008-2015) – MRA12","description":"\u003cp\u003eCNC Racing supplies its Mirror Blanking Plug M10 Left-Hand Thread as MRA12 for the BMW F 800 GS Adventure (2008-2015). Inter-Pace has gathered the key points on MRA12 for the F 800 GS Adventure so that you can order with confidence. Read on for what MRA12 is made of and what to look out for when fitting it to the F 800 GS Adventure.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: BMW F 800 GS Adventure (2008-2015)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eThe base material of MRA12 is aluminium, chosen for its balance of low mass and rigidity. Made from aluminium, MRA12 puts hardly any extra weight on the motorcycle. Material and workmanship of MRA12 have been aligned with one another.\u003c\/p\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003eFits according to CNC Racing: BMW F 800 GS Adventure, production period 2008-2015. The year of manufacture matters: MRA12 is assigned to the BMW F 800 GS Adventure built 2008-2015. Every detail counts: name, variant and build year of your BMW F 800 GS Adventure should all match. The same part MRA12 is available for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, and every one of them has its own page. Before ordering MRA12, it helps to have the vehicle identification number to hand. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFunction Overview\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eA damp microfibre cloth and a little mild soap are enough to keep MRA12 clean. Check MRA12 again after the first rides to see that it is still firmly in place. Note any change in how MRA12 sits or works and have it checked.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eCNC Racing conceived MRA12 as an extra in the mirror mounting hole of the handlebar. Installed in the mirror mounting hole of the handlebar, MRA12 works alongside the original components. CNC Racing delivers MRA12 as one piece. Gloves protect both your hands and the surface of MRA12 during fitting. Inter-Pace recommends fitting MRA12 in a workshop if you are unsure.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eColour options for MRA12: black and red.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eThe CNC Racing delivery of MRA12 comes without approval documents. The legal situation for MRA12 differs from country to country. On closed circuits, road approval rules generally do not apply to MRA12.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e BMW F 800 GS Adventure (2008-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157166870794,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157166903562,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-bmw-f-800-r-2009-2015-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread BMW F 800 R (2009-2015) – MRA12","description":"\u003cp\u003eThe subject of this page is MRA12: CNC Racing's Mirror Blanking Plug M10 Left-Hand Thread for the BMW F 800 R (2009-2015). Everything relevant to MRA12 on the F 800 R is summarised further down: material, scope of delivery and road use. Below, Inter-Pace sums up what CNC Racing says about MRA12 and what it means for the F 800 R.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: BMW F 800 R, 2009-2015\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOn to the Bike\u003c\/h2\u003e\u003cp\u003eNothing has to be removed: MRA12 joins the standard parts in the mirror mounting hole of the handlebar. Attach MRA12 in the mirror mounting hole of the handlebar; the original parts remain where they are. CNC Racing packs MRA12 as a single component. Choose tools that match the screw heads exactly, so that MRA12 is not marked during fitting. If you lack the tools or experience for MRA12, leave the job to a workshop.\u003c\/p\u003e\u003ch2\u003eCleaning Advice\u003c\/h2\u003e\u003cp\u003eLeave out aggressive chemicals when cleaning MRA12. A careful look at MRA12 after off-road or track use is advisable. Clean MRA12 before storing the motorcycle for longer periods.\u003c\/p\u003e\u003ch2\u003eVehicle Match\u003c\/h2\u003e\u003cp\u003eThe manufacturer has paired MRA12 with the BMW F 800 R, production 2009-2015. Look at the year of manufacture of your F 800 R and check it against 2009-2015. We recommend checking the frame number or type code of your F 800 R against the manufacturer data. The part number MRA12 is shared with listings for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. With the part number MRA12, any CNC Racing dealer can confirm the fitment as well. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Line-Up\u003c\/h2\u003e\u003cp\u003eYou can choose MRA12 in black and red using the selector above.\u003c\/p\u003e\u003ch2\u003eFunction Overview\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eMaterial Profile\u003c\/h2\u003e\u003cp\u003eLight alloy is what CNC Racing has chosen for MRA12. The metal used for MRA12 is aluminium, valued in motorsport for its low density. Each detail of MRA12 is finished with care.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eAs far as approval is concerned, CNC Racing offers no ABE or parts certificate for MRA12. Whether an individual inspection of MRA12 is possible depends on the testing body. An expert inspection can clarify if MRA12 is acceptable on your motorcycle in road traffic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e BMW F 800 R (2009-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157168443658,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157168476426,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-bmw-r-1200-r-2015-2018-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread BMW R 1200 R (2015-2018) – MRA12","description":"\u003cp\u003eWith MRA12, CNC Racing supplies its Mirror Blanking Plug M10 Left-Hand Thread to riders of the BMW R 1200 R built 2015-2018. A clear overview of MRA12 for the R 1200 R follows: construction, scope, fitting and care. Starting with the material, this page walks through MRA12 for the R 1200 R point by point.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: BMW R 1200 R, 2015-2018\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eYour motorcycle keeps its original parts, and MRA12 is added in the mirror mounting hole of the handlebar. MRA12 does not replace anything; it is attached in the mirror mounting hole of the handlebar. This listing is for one piece of MRA12. Handle MRA12 carefully before fitting to avoid scratches. Clean threads make it easier to fit MRA12 correctly.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eCNC Racing's colour programme for MRA12 includes black and red.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eWarm water and a soft sponge reach the edges of MRA12. Check the screws of MRA12 once in a while and retighten them if needed. Have a look at MRA12 whenever you check tyre pressure or chain.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eThis page lists MRA12 for one motorcycle only: the BMW R 1200 R (2015-2018). Have a look at the build date of your R 1200 R; it should fall inside 2015-2018. Production outside 2015-2018 means the part may not fit your R 1200 R; please ask us. Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR: further entries in the CNC Racing data for MRA12. Note MRA12 when you contact us; it avoids mix-ups between similar parts. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eHow It Is Built\u003c\/h2\u003e\u003cp\u003eThe aluminium construction of MRA12 keeps the added weight small. Aluminium alloy is what MRA12 is made of. Precise shaping and careful finishing are part of every MRA12.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eCNC Racing documentation for MRA12 contains no ABE. Your local registration authority can tell you whether MRA12 is allowed on the road. Rules for accessories like MRA12 vary across Europe.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e BMW R 1200 R (2015-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157172408586,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157172441354,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-bmw-s-1000-r-2014-2019-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread BMW S 1000 R (2014-2019) – MRA12","description":"\u003cp\u003eThe maker's code MRA12 belongs to a CNC Racing part listed for the BMW S 1000 R (2014-2019): Mirror Blanking Plug M10 Left-Hand Thread. Starting with the material, this page walks through MRA12 for the S 1000 R point by point. CNC Racing documents MRA12 per motorcycle, and the following sections apply to the S 1000 R.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: BMW S 1000 R, 2014-2019\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAbout Construction\u003c\/h2\u003e\u003cp\u003eAluminium makes up MRA12, a material that does not rust. Aluminium gives MRA12 a low weight compared with steel parts of similar size. Step by step, CNC Racing turns raw aluminium into MRA12.\u003c\/p\u003e\u003ch2\u003eCare Information\u003c\/h2\u003e\u003cp\u003eRinse MRA12 with clean water if it has been exposed to road salt. Have MRA12 checked by a workshop if you notice any damage. Damage from stones or debris on MRA12 should be inspected promptly.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eAs specified by CNC Racing, MRA12 fits the BMW S 1000 R (2014-2019). Owners should verify that their S 1000 R is in standard form where MRA12 is mounted. The production period of the BMW S 1000 R named here is 2014-2019; check that yours falls within it. The same part MRA12 is available for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, and every one of them has its own page. If you have questions on fitment, Inter-Pace will check MRA12 against your motorcycle before you order. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eHow It Helps\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eTo match other parts, MRA12 is offered in black and red.\u003c\/p\u003e\u003ch2\u003eGetting It Mounted\u003c\/h2\u003e\u003cp\u003eCNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. MRA12 is added in the mirror mounting hole of the handlebar without removing any original part. The scope of delivery of MRA12 is one part. Proper fitting of MRA12 requires clean and undamaged mounting points. Make sure no cables or hoses are trapped when mounting MRA12.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eNo expert report or ABE: CNC Racing does not issue these for MRA12. Approval rules for MRA12 are set nationally, not by the manufacturer. Ask your inspection centre whether MRA12 needs an individual assessment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e BMW S 1000 R (2014-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157174112522,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157174145290,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-bmw-s-1000-rr-2009-2018-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread BMW S 1000 RR (2009-2018) – MRA12","description":"\u003cp\u003eRiding the BMW S 1000 RR (2009-2018)? Then MRA12, the Mirror Blanking Plug M10 Left-Hand Thread from CNC Racing, is matched to your motorcycle. Rather than general promises, this page gives you concrete facts about MRA12 and the S 1000 RR. CNC Racing describes MRA12 as a part for the S 1000 RR; our notes below add fitting and care advice.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: BMW S 1000 RR (2009-2018)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDoes It Suit Your Motorcycle?\u003c\/h2\u003e\u003cp\u003eCNC Racing places the BMW S 1000 RR (2009-2018) on the fitment list for MRA12. Imported bikes can differ from the European S 1000 RR; compare the type code if in doubt. Special editions of the S 1000 RR occasionally use different parts; check the exact version before ordering. Look for MRA12 under your model name if your motorcycle is listed here: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Fitment information for MRA12 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eMaterial Notes\u003c\/h2\u003e\u003cp\u003eMRA12 is produced in aluminium, a metal that resists corrosion well when finished properly. Aluminium gives MRA12 a low weight compared with steel parts of similar size. Precise shaping and careful finishing are part of every MRA12.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003eRinse MRA12 with clean water if it has been exposed to road salt. After washing, check that no water remains trapped around MRA12. In storage, keep MRA12 away from direct heat sources.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eIn the variant menu, MRA12 is listed in black and red.\u003c\/p\u003e\u003ch2\u003eFeatures in Use\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eMRA12 does not replace anything; it is attached in the mirror mounting hole of the handlebar. The installation of MRA12 in the mirror mounting hole of the handlebar leaves all original parts in place. Per unit, MRA12 is one individual part. Where MRA12 has several fixings, tighten them crosswise and in stages. Work slowly and without force when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eRoad Approval Notes\u003c\/h2\u003e\u003cp\u003ePlease note: CNC Racing does not provide approval documents for MRA12. National laws decide whether MRA12 may be fitted for road use. Using MRA12 on public roads is your responsibility, so clarify the legal position first.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e BMW S 1000 RR (2009-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157174898954,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157174931722,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-698-mono-2024-2026-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard 698 Mono (2024-2026) – MRA12","description":"\u003cp\u003eFor owners of the Ducati Hypermotard 698 Mono (2024-2026), CNC Racing offers the Mirror Blanking Plug M10 Left-Hand Thread under number MRA12. What makes MRA12 relevant for the Hypermotard 698 Mono is explained under the headings below. Material, contents and installation of MRA12 are the topics below, all with reference to the Hypermotard 698 Mono.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hypermotard 698 Mono (2024-2026)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eClean MRA12 only when it has cooled down after a ride. Every few thousand kilometres, take a closer look at MRA12. Damage from stones or debris on MRA12 should be inspected promptly.\u003c\/p\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003eThe Ducati Hypermotard 698 Mono (2024-2026) is the motorcycle this MRA12 listing refers to. You can find model and type details for your Hypermotard 698 Mono in the registration document. Doubts about your Hypermotard 698 Mono? A short message to Inter-Pace saves time and returns. Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR: further entries in the CNC Racing data for MRA12. Inter-Pace can confirm MRA12 for your motorcycle using the frame number. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFitting Safely\u003c\/h2\u003e\u003cp\u003eMRA12 finds its place in the mirror mounting hole of the handlebar as an extra component. The installation of MRA12 in the mirror mounting hole of the handlebar leaves all original parts in place. MRA12 comes as a single item. Grease or thread locker? Follow the guidance of your workshop manual for MRA12. Where MRA12 has several fixings, tighten them crosswise and in stages.\u003c\/p\u003e\u003ch2\u003eHow It Is Built\u003c\/h2\u003e\u003cp\u003eMRA12 is an aluminium part, lighter than a comparable steel component. Aluminium forms the body of MRA12 and keeps the weight low. Consistent production quality defines MRA12.\u003c\/p\u003e\u003ch2\u003eFeatures in Use\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eThe finish of MRA12 is offered in black and red.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eAs far as approval is concerned, CNC Racing offers no ABE or parts certificate for MRA12. Clarify the approval of MRA12 with the responsible office in your country. Check whether MRA12 must be entered in your vehicle documents.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 698 Mono (2024-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157175030026,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157175062794,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-821-2013-2015-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard 821 (2013-2015) – MRA12","description":"\u003cp\u003eIn the CNC Racing catalogue, MRA12 appears under the name Mirror Blanking Plug M10 Left-Hand Thread, with the Ducati Hypermotard 821 (2013-2015) as fitment. This text helps you decide whether MRA12 meets your plans for the Hypermotard 821. On the Hypermotard 821, MRA12 takes a defined place; the paragraphs below explain where and how.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hypermotard 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Notes\u003c\/h2\u003e\u003cp\u003eMRA12 is available in black and red; select your version with the colour option.\u003c\/p\u003e\u003ch2\u003eInstalling It\u003c\/h2\u003e\u003cp\u003eCNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. Fitting MRA12 in the mirror mounting hole of the handlebar adds to the motorcycle without taking anything away. The delivery includes exactly one MRA12. A workshop manual for your motorcycle is useful when fitting MRA12. Choose tools that match the screw heads exactly, so that MRA12 is not marked during fitting.\u003c\/p\u003e\u003ch2\u003eMaterial Profile\u003c\/h2\u003e\u003cp\u003eChoosing aluminium for MRA12 allows CNC Racing to keep the part light. Aluminium was selected for MRA12 as a light and corrosion-resistant metal. From design to finish, MRA12 is produced with consistency.\u003c\/p\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eThe Ducati Hypermotard 821 (2013-2015) is the motorcycle this MRA12 listing refers to. Different markets sometimes received different versions of the Hypermotard 821; the type code helps to tell them apart. A quick look at the type designation on your papers shows whether the Ducati Hypermotard 821 entry applies to you. Should you own another listed model (Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR), the same MRA12 is on a separate page. Inter-Pace can confirm MRA12 for your motorcycle using the frame number. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFunction Explained\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eWhen cleaning MRA12, work from top to bottom with a soft sponge. Damage from stones or debris on MRA12 should be inspected promptly. Inspect MRA12 as part of your seasonal check.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eNo certificate for road registration is included with MRA12, and CNC Racing does not publish one. Please make sure that riding with MRA12 is permitted where you live. Approval rules for MRA12 are set nationally, not by the manufacturer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157175914762,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157175947530,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-939-2016-2018-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard 939 (2016-2018) – MRA12","description":"\u003cp\u003eThe maker's code MRA12 belongs to a CNC Racing part listed for the Ducati Hypermotard 939 (2016-2018): Mirror Blanking Plug M10 Left-Hand Thread. CNC Racing documents MRA12 per motorcycle, and the following sections apply to the Hypermotard 939. Every section below takes up one aspect of MRA12, always with the Hypermotard 939 in view.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hypermotard 939 (2016-2018)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore Fitting\u003c\/h2\u003e\u003cp\u003eAttach MRA12 in the mirror mounting hole of the handlebar; the original parts remain where they are. You fit MRA12 in the mirror mounting hole of the handlebar on top of the existing equipment. Inside the box there is a single MRA12. After fitting, check that moving parts near MRA12 can move freely. Do not force MRA12 into position; if it does not fit, check the cause.\u003c\/p\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eCNC Racing supplies MRA12 in black and red to match the look of your motorcycle.\u003c\/p\u003e\u003ch2\u003eModel Compatibility\u003c\/h2\u003e\u003cp\u003eAs specified by CNC Racing, MRA12 fits the Ducati Hypermotard 939 (2016-2018). Unsure whether your bike counts as Ducati Hypermotard 939? Send us the vehicle identification number and we will check. Model updates during production can change details, so compare your Hypermotard 939 with the CNC Racing listing. Further fitments of MRA12 according to CNC Racing include Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. The CNC Racing website lists the applications of MRA12 as well, should you want a second source. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eBehind the Material\u003c\/h2\u003e\u003cp\u003eThe base material of MRA12 is aluminium, chosen for its balance of low mass and rigidity. For MRA12, CNC Racing works with aluminium, which machines cleanly and holds tight tolerances. Precise shaping and careful finishing are part of every MRA12.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eClean MRA12 only when it has cooled down after a ride. Check the screws of MRA12 once in a while and retighten them if needed. Have a look at MRA12 whenever you check tyre pressure or chain.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eCNC Racing has not issued type approval documents for MRA12. The legal situation for MRA12 differs from country to country. In some countries MRA12 can be used without further paperwork, in others it cannot.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 939 (2016-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157176701194,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157176733962,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-950-2019-2025-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard 950 (2019-2025) – MRA12","description":"\u003cp\u003eOur shop presents CNC Racing's Mirror Blanking Plug M10 Left-Hand Thread MRA12 for the Ducati Hypermotard 950 of 2019-2025. Before you order for your Hypermotard 950, the notes below help you check fitment, contents and approval of MRA12. Further information about MRA12 and its use on the Hypermotard 950 is given below, topic by topic.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Hypermotard 950, 2019-2025\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eLook up MRA12 in the CNC Racing data and you will find the Ducati Hypermotard 950 (2019-2025) listed. Ordering for a friend's Hypermotard 950? Ask for the year of manufacture first. Special editions of the Hypermotard 950 occasionally use different parts; check the exact version before ordering. In our shop, MRA12 for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR is listed on a separate product page. Our customer service can look up MRA12 for you if the fitment is not clear. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eThe colour range of MRA12 covers black and red.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eSoft cloths and neutral cleaners are all MRA12 needs for routine care. A motorcycle cover helps protect MRA12 when parked outside. Have a look at MRA12 whenever you check tyre pressure or chain.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eYour motorcycle keeps its original parts, and MRA12 is added in the mirror mounting hole of the handlebar. MRA12 does not replace anything; it is attached in the mirror mounting hole of the handlebar. Inside the box there is a single MRA12. Allow enough time for MRA12: careful fitting pays off in a clean result. Put small parts of MRA12 into a bowl while working, so none of them disappear.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eIn MRA12, CNC Racing uses aluminium, a metal that handles everyday loads on a motorcycle well. CNC Racing chose aluminium for MRA12, combining low weight with sufficient strength. CNC Racing picked aluminium for MRA12 to suit its purpose.\u003c\/p\u003e\u003ch2\u003eRole and Purpose\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eCNC Racing makes no approval document available for MRA12. Inter-Pace cannot give legal advice on MRA12; your authority or testing body can. Check with a testing centre before you ride on the road with MRA12.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 950 (2019-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157177979146,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157178011914,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-950-sp-2019-2025-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard 950 SP (2019-2025) – MRA12","description":"\u003cp\u003eHere you will find MRA12 from CNC Racing, described as Mirror Blanking Plug M10 Left-Hand Thread; the Ducati Hypermotard 950 SP (2019-2025) is its listed fitment. Starting with the material, this page walks through MRA12 for the Hypermotard 950 SP point by point. Our description of MRA12 for the Hypermotard 950 SP is based on the information CNC Racing publishes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hypermotard 950 SP (2019-2025)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTask on the Bike\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eLook up MRA12 in the CNC Racing data and you will find the Ducati Hypermotard 950 SP (2019-2025) listed. Where your Hypermotard 950 SP already carries aftermarket parts nearby, make sure MRA12 can still be fitted. We recommend checking the frame number or type code of your Hypermotard 950 SP against the manufacturer data. Look for MRA12 under your model name if your motorcycle is listed here: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. CNC Racing updates its application lists, and Inter-Pace follows these changes for MRA12. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Overview\u003c\/h2\u003e\u003cp\u003eColour variants of MRA12 on this page: black and red.\u003c\/p\u003e\u003ch2\u003eWorkshop Notes\u003c\/h2\u003e\u003cp\u003eThe installation of MRA12 in the mirror mounting hole of the handlebar leaves all original parts in place. Installed in the mirror mounting hole of the handlebar, MRA12 works alongside the original components. Delivery of MRA12 consists of one piece. Inter-Pace recommends fitting MRA12 in a workshop if you are unsure. Protect painted surfaces near MRA12 with tape or a cloth during fitting.\u003c\/p\u003e\u003ch2\u003eBehind the Material\u003c\/h2\u003e\u003cp\u003eAluminium was selected for MRA12 as a light and corrosion-resistant metal. Aluminium alloy is what MRA12 is made of. Consistent production quality defines MRA12.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eA cleaning product for aluminium helps keep MRA12 in good shape. A careful look at MRA12 after off-road or track use is advisable. Check MRA12 for firm fit from time to time, especially after long rides.\u003c\/p\u003e\u003ch2\u003ePaperwork and Approval\u003c\/h2\u003e\u003cp\u003eWith MRA12, CNC Racing supplies the part only, without approval documents. A testing organisation can assess MRA12 individually if your country requires it. In some countries MRA12 can be used without further paperwork, in others it cannot.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 950 SP (2019-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157179617546,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157179650314,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-v2-890-2026-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard V2 890 (2026) – MRA12","description":"\u003cp\u003eItem MRA12 is the Mirror Blanking Plug M10 Left-Hand Thread by CNC Racing, offered here for the Ducati Hypermotard V2 890 (2026). The headings below lead you through MRA12 for the Hypermotard V2 890, from construction to care. A clear overview of MRA12 for the Hypermotard V2 890 follows: construction, scope, fitting and care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hypermotard V2 890 (2026)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCleaning and Inspection\u003c\/h2\u003e\u003cp\u003ePlain water with a drop of neutral cleaner removes everyday dirt from MRA12. Lay tools down carefully so they do not scratch MRA12. Inspect MRA12 as part of your seasonal check.\u003c\/p\u003e\u003ch2\u003eFunction Notes\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eDoes It Suit Your Motorcycle?\u003c\/h2\u003e\u003cp\u003eCNC Racing places the Ducati Hypermotard V2 890 (2026) on the fitment list for MRA12. If several versions of the Hypermotard V2 890 exist, the version stated in your papers is the one that counts. Your registration papers confirm whether your motorcycle is listed as Ducati Hypermotard V2 890 and built 2026. Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR: further entries in the CNC Racing data for MRA12. The details on this page for MRA12 are as complete as CNC Racing's data allows. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eMRA12 is supplied in black and red.\u003c\/p\u003e\u003ch2\u003eContents and Fitting\u003c\/h2\u003e\u003cp\u003eMRA12 finds its place in the mirror mounting hole of the handlebar as an extra component. MRA12 extends the equipment of your motorcycle in the mirror mounting hole of the handlebar. MRA12 comes as a single item. Fitting MRA12 is easier with a second pair of hands. Photos taken before dismantling help you when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eMaterial Facts\u003c\/h2\u003e\u003cp\u003eMRA12 owes its low weight to aluminium as the base material. Choosing aluminium for MRA12 allows CNC Racing to keep the part light. MRA12 is the result of careful work with aluminium.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eThere is no approval document for MRA12 from CNC Racing. Track use and road use of MRA12 can be treated differently by law. If you plan to ride on public roads with MRA12, check the legal requirements first.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard V2 890 (2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157180829962,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157180862730,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hypermotard-v2-890-sp-2026-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hypermotard V2 890 SP (2026) – MRA12","description":"\u003cp\u003eNumber MRA12 in the CNC Racing programme stands for Mirror Blanking Plug M10 Left-Hand Thread, built for the Ducati Hypermotard V2 890 SP (2026). The sections that follow keep to facts: what MRA12 is, how it fits the Hypermotard V2 890 SP and how to look after it. Below, Inter-Pace sums up what CNC Racing says about MRA12 and what it means for the Hypermotard V2 890 SP.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Hypermotard V2 890 SP, 2026\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWorking Principle\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eDepending on stock, MRA12 is available in black and red.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eMRA12 is an add-on, and its place is in the mirror mounting hole of the handlebar. MRA12 does not replace anything; it is attached in the mirror mounting hole of the handlebar. Every order of MRA12 includes one part. Some experience with motorcycle mechanics is useful for installing MRA12. Protect painted surfaces near MRA12 with tape or a cloth during fitting.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eHigh-pressure cleaners should not be aimed directly at MRA12. Check MRA12 again after the first rides to see that it is still firmly in place. A dry, covered parking space protects MRA12 as well as the rest of the motorcycle.\u003c\/p\u003e\u003ch2\u003eMatching Your Bike\u003c\/h2\u003e\u003cp\u003eBy manufacturer data, MRA12 belongs on the Ducati Hypermotard V2 890 SP (2026). To be on the safe side, compare model, version and year of your Hypermotard V2 890 SP with this page. Your Hypermotard V2 890 SP should match both the model name and 2026 for this listing to apply. CNC Racing names MRA12 for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR too, with a separate page at Inter-Pace for each. Do you need help with the choice? Inter-Pace advises on MRA12 and related CNC Racing parts. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eMRA12 is an aluminium part, lighter than a comparable steel component. Aluminium is the material of choice for MRA12 because it is light and dimensionally stable. Production of MRA12 follows a consistent process at CNC Racing.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eCNC Racing makes no approval document available for MRA12. Modifications such as MRA12 may need to be reported, depending on the country. For road use of MRA12, the laws of the country of registration apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard V2 890 SP (2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157182468362,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157182501130,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hyperstrada-821-2013-2015-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hyperstrada 821 (2013-2015) – MRA12","description":"\u003cp\u003eOur shop presents CNC Racing's Mirror Blanking Plug M10 Left-Hand Thread MRA12 for the Ducati Hyperstrada 821 of 2013-2015. The sections that follow keep to facts: what MRA12 is, how it fits the Hyperstrada 821 and how to look after it. CNC Racing builds its range around specific models, the Hyperstrada 821 included, and MRA12 is one result.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hyperstrada 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Bike It Suits\u003c\/h2\u003e\u003cp\u003eInter-Pace lists MRA12 for the Ducati Hyperstrada 821 (2013-2015) exactly as CNC Racing specifies. Look at the year of manufacture of your Hyperstrada 821 and check it against 2013-2015. Your Hyperstrada 821 should match both the model name and 2013-2015 for this listing to apply. We present MRA12 separately for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR so that every page shows the right fitment. The reference MRA12 identifies this part clearly in any enquiry. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eShades on Offer\u003c\/h2\u003e\u003cp\u003eOur shop lists MRA12 in black and red.\u003c\/p\u003e\u003ch2\u003eMaterial Used\u003c\/h2\u003e\u003cp\u003eAluminium is the material of choice for MRA12 because it is light and dimensionally stable. CNC Racing produces MRA12 in aluminium, a light metal with good strength for its weight. Clean workmanship gives MRA12 a high-quality appearance.\u003c\/p\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eMounting Notes\u003c\/h2\u003e\u003cp\u003eFitting MRA12 in the mirror mounting hole of the handlebar adds to the motorcycle without taking anything away. In the mirror mounting hole of the handlebar, MRA12 is added as an accessory. Every order of MRA12 includes one part. Fitting MRA12 calls for basic mechanical skills and suitable tools. If MRA12 needs adjusting, do so before final tightening.\u003c\/p\u003e\u003ch2\u003eMaintenance Tips\u003c\/h2\u003e\u003cp\u003eAvoid aggressive solvents near MRA12; they can attack the surface. Regular inspection of MRA12 is part of responsible motorcycle care. Keep an eye on MRA12 after any tip-over in the garage.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eCNC Racing provides MRA12 with no German approval paperwork. Whether MRA12 is permitted on public roads is a matter for the rules of your country. We recommend clarifying the use of MRA12 with a recognised inspection body.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hyperstrada 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157183353098,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157183385866,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-hyperstrada-939-2016-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Hyperstrada 939 (2016) – MRA12","description":"\u003cp\u003eThe Mirror Blanking Plug M10 Left-Hand Thread with code MRA12 comes from CNC Racing and is listed for the Ducati Hyperstrada 939 (2016). CNC Racing works with model-specific data, which is why the Hyperstrada 939 has its own listing for MRA12. Before you order for your Hyperstrada 939, the notes below help you check fitment, contents and approval of MRA12.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hyperstrada 939 (2016)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting Information\u003c\/h2\u003e\u003cp\u003eMRA12 complements the motorcycle in the mirror mounting hole of the handlebar. CNC Racing conceived MRA12 as an extra in the mirror mounting hole of the handlebar. The delivery includes exactly one MRA12. Gloves protect both your hands and the surface of MRA12 during fitting. Do not overtighten the fixings of MRA12, especially in aluminium threads.\u003c\/p\u003e\u003ch2\u003eCleaning Advice\u003c\/h2\u003e\u003cp\u003eDry MRA12 with a soft cloth after washing to avoid water marks. Cracks, deformation or loose screws on MRA12 are a reason to stop and check. Look over MRA12 at every service and replace it if damaged.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eColours for MRA12, as specified by the maker: black and red.\u003c\/p\u003e\u003ch2\u003eFunction Overview\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eModel and Year\u003c\/h2\u003e\u003cp\u003ePer CNC Racing, MRA12 has been engineered around the Ducati Hyperstrada 939 (2016). Bikes registered later than they were built can confuse matters; what counts for your Hyperstrada 939 is the production date. Check carefully: the CNC Racing data refers to the Ducati Hyperstrada 939 only within 2016. MRA12 fits more than this motorcycle: CNC Racing also names Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Any uncertainty about MRA12? A short enquiry costs nothing and saves time. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eUsing aluminium, CNC Racing gives MRA12 low weight and a precise shape. CNC Racing chose aluminium for MRA12, combining low weight with sufficient strength. CNC Racing applies the same production standard to MRA12 as to its other parts.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eCNC Racing does not supply an ABE or a parts certificate for MRA12. We recommend clarifying the use of MRA12 with a recognised inspection body. Whether an individual inspection of MRA12 is possible depends on the testing body.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hyperstrada 939 (2016)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157184499978,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157184532746,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-monster-1200-2014-2021-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Monster 1200 (2014-2021) – MRA12","description":"\u003cp\u003eManufacturer CNC Racing names the Ducati Monster 1200 (2014-2021) as a target model for MRA12, the Mirror Blanking Plug M10 Left-Hand Thread. CNC Racing provides the technical background, and Inter-Pace adds the points that matter for the Monster 1200. This text helps you decide whether MRA12 meets your plans for the Monster 1200.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 1200 (2014-2021)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eFits according to CNC Racing: Ducati Monster 1200, production period 2014-2021. Ordering for a friend's Monster 1200? Ask for the year of manufacture first. Doubts about your Monster 1200? A short message to Inter-Pace saves time and returns. Look for MRA12 under your model name if your motorcycle is listed here: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Unclear details about MRA12 can be resolved quickly with a short message to us. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eWhen cleaning MRA12, work from top to bottom with a soft sponge. Keep chemicals away from MRA12 when using cleaning products on other parts. Should MRA12 come loose, stop and secure it before riding further.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eInter-Pace offers MRA12 in black and red.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eMRA12 extends the equipment of your motorcycle in the mirror mounting hole of the handlebar. Nothing has to be removed: MRA12 joins the standard parts in the mirror mounting hole of the handlebar. Delivery of MRA12 consists of one piece. Clean threads make it easier to fit MRA12 correctly. Work slowly and without force when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eMade from aluminium, MRA12 puts hardly any extra weight on the motorcycle. MRA12 is an aluminium part, lighter than a comparable steel component. Suitable aluminium and exact workmanship come together in MRA12.\u003c\/p\u003e\u003ch2\u003eWorking Principle\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eCNC Racing holds no ABE for MRA12. National laws decide whether MRA12 may be fitted for road use. Track use and road use of MRA12 can be treated differently by law.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 (2014-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157186466058,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157186498826,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-monster-1200-r-2016-2019-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Monster 1200 R (2016-2019) – MRA12","description":"\u003cp\u003eLooking for the Mirror Blanking Plug M10 Left-Hand Thread by CNC Racing for the Ducati Monster 1200 R (2016-2019)? Its number is MRA12. Please read the notes on MRA12 below; they refer specifically to the Monster 1200 R. In the next sections you can check how MRA12 is supplied and what fitting it to the Monster 1200 R involves.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Monster 1200 R, 2016-2019\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCleaning Advice\u003c\/h2\u003e\u003cp\u003eRemove road dirt from MRA12 with water and a pH-neutral cleaner. A motorcycle cover helps protect MRA12 when parked outside. Damage from stones or debris on MRA12 should be inspected promptly.\u003c\/p\u003e\u003ch2\u003eHow It Is Built\u003c\/h2\u003e\u003cp\u003eUsing aluminium, CNC Racing gives MRA12 low weight and a precise shape. Choosing aluminium for MRA12 allows CNC Racing to keep the part light. A clean finish completes MRA12 after the shaping process.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eMRA12 goes on the Ducati Monster 1200 R (2016-2019), as confirmed by CNC Racing's application data. Bikes registered later than they were built can confuse matters; what counts for your Monster 1200 R is the production date. Unsure whether your bike counts as Ducati Monster 1200 R? Send us the vehicle identification number and we will check. More fitments for MRA12 per CNC Racing: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Note MRA12 when you contact us; it avoids mix-ups between similar parts. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Versions\u003c\/h2\u003e\u003cp\u003eThe version of MRA12 in black and red can be selected above.\u003c\/p\u003e\u003ch2\u003eFunction Notes\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eFitting Safely\u003c\/h2\u003e\u003cp\u003eMRA12 complements the motorcycle in the mirror mounting hole of the handlebar. As an extra part, MRA12 is mounted in the mirror mounting hole of the handlebar. One part, number MRA12, is what you receive. If MRA12 needs adjusting, do so before final tightening. Mechanical care during installation protects MRA12 and the motorcycle.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eWithout ABE or parts certificate from CNC Racing, MRA12 is sold as an accessory part. Please make sure that riding with MRA12 is permitted where you live. A testing organisation can assess MRA12 individually if your country requires it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 R (2016-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157187383562,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157187416330,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-monster-1200-s-2014-2021-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Monster 1200 S (2014-2021) – MRA12","description":"\u003cp\u003eOffered for the Ducati Monster 1200 S (2014-2021), the CNC Racing Mirror Blanking Plug M10 Left-Hand Thread carries the number MRA12. How MRA12 relates to the Monster 1200 S, and what you get in the box, is explained step by step below. Inter-Pace has gathered the key points on MRA12 for the Monster 1200 S so that you can order with confidence.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Monster 1200 S, 2014-2021\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTask on the Bike\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eCNC Racing produces MRA12 in black and red.\u003c\/p\u003e\u003ch2\u003eMounting Advice\u003c\/h2\u003e\u003cp\u003eMRA12 complements the motorcycle in the mirror mounting hole of the handlebar. You fit MRA12 in the mirror mounting hole of the handlebar on top of the existing equipment. MRA12 reaches you as one individual part. After fitting, check that moving parts near MRA12 can move freely. Before fitting MRA12, compare it with the part it goes next to or replaces.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eIn the CNC Racing application chart, MRA12 is linked to the Ducati Monster 1200 S (2014-2021). Your Monster 1200 S should match both the model name and 2014-2021 for this listing to apply. Race-converted examples of the Monster 1200 S may no longer have the parts MRA12 is designed around. The search function leads you to MRA12 for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, too. The reference MRA12 identifies this part clearly in any enquiry. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eRemove road dirt from MRA12 with water and a pH-neutral cleaner. A dry, covered parking space protects MRA12 as well as the rest of the motorcycle. Damage to MRA12 after a crash should be assessed by a specialist.\u003c\/p\u003e\u003ch2\u003eMaterial Notes\u003c\/h2\u003e\u003cp\u003eAluminium is a proven material for machined parts such as MRA12. The metal used for MRA12 is aluminium, valued in motorsport for its low density. Basic properties of MRA12 come from the aluminium, and the finish does the rest.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eNo expert report or ABE: CNC Racing does not issue these for MRA12. Your local registration authority can tell you whether MRA12 is allowed on the road. Ask your inspection centre whether MRA12 needs an individual assessment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 S (2014-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157190529290,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157190562058,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-monster-821-2014-2017-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Monster 821 (2014-2017) – MRA12","description":"\u003cp\u003eThe maker's code MRA12 belongs to a CNC Racing part listed for the Ducati Monster 821 (2014-2017): Mirror Blanking Plug M10 Left-Hand Thread. In the next sections you can check how MRA12 is supplied and what fitting it to the Monster 821 involves. From material to approval, this overview of MRA12 has been put together for the Monster 821.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 821 (2014-2017)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eContents and Fitting\u003c\/h2\u003e\u003cp\u003eFitting MRA12 in the mirror mounting hole of the handlebar adds to the motorcycle without taking anything away. Attach MRA12 in the mirror mounting hole of the handlebar; the original parts remain where they are. One single component makes up the delivery of MRA12. Hex keys and sockets in good condition make fitting MRA12 easier. Photos taken before dismantling help you when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eFeatures in Use\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eInspection and Care\u003c\/h2\u003e\u003cp\u003eWarm water and a soft sponge reach the edges of MRA12. Inspect the fixings of MRA12 during routine maintenance. Inspect MRA12 as part of your seasonal check.\u003c\/p\u003e\u003ch2\u003eWhat It Is Made From\u003c\/h2\u003e\u003cp\u003eAluminium makes up MRA12, a material that does not rust. Made from aluminium, MRA12 puts hardly any extra weight on the motorcycle. The way MRA12 is finished matches the quality of its aluminium.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eMRA12 has been made to suit the Ducati Monster 821 (2014-2017), as stated by CNC Racing. Bikes registered later than they were built can confuse matters; what counts for your Monster 821 is the production date. Your dealer or registration document can confirm the exact version of your Ducati Monster 821. Apart from the bike named here, MRA12 is also listed for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Send model and year, and Inter-Pace will look at MRA12 for your bike. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eMatching your bike's colour scheme is possible with MRA12 in black and red.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eThe manufacturer CNC Racing provides no approval certificate for MRA12. If you plan to ride on public roads with MRA12, check the legal requirements first. Local regulations on modifications also apply to MRA12.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 821 (2014-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157192331530,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157192364298,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1200-2010-2017-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1200 (2010-2017) – MRA12","description":"\u003cp\u003eCNC Racing catalogue entry MRA12 covers its mirror blanking plug m10 left-hand thread, made to suit the Ducati Multistrada 1200 (2010-2017). In the next sections you can check how MRA12 is supplied and what fitting it to the Multistrada 1200 involves. CNC Racing provides the technical background, and Inter-Pace adds the points that matter for the Multistrada 1200.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1200 (2010-2017)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Build\u003c\/h2\u003e\u003cp\u003eCNC Racing trusts aluminium for MRA12, a metal that keeps its shape under load. MRA12 is an aluminium part, lighter than a comparable steel component. MRA12 is finished to CNC Racing's production standard.\u003c\/p\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003eMRA12 carries a CNC Racing fitment entry for the Ducati Multistrada 1200 (2010-2017). Your Multistrada 1200 should match both the model name and 2010-2017 for this listing to apply. Check carefully: the CNC Racing data refers to the Ducati Multistrada 1200 only within 2010-2017. In our shop, MRA12 for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR is listed on a separate product page. We are glad to compare MRA12 with the parts currently fitted to your motorcycle. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eYour options for the colour of MRA12: black and red.\u003c\/p\u003e\u003ch2\u003eLooking After the Part\u003c\/h2\u003e\u003cp\u003ePat MRA12 dry after cleaning rather than letting water dry on the surface. Replace MRA12 if it is bent or cracked rather than straightening it. Leaving the motorcycle in direct sun for long periods can fade surfaces, including MRA12.\u003c\/p\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eFitting Information\u003c\/h2\u003e\u003cp\u003eMRA12 finds its place in the mirror mounting hole of the handlebar as an extra component. In addition to the original parts, MRA12 goes in the mirror mounting hole of the handlebar. MRA12 reaches you as one individual part. Gloves protect both your hands and the surface of MRA12 during fitting. Clean the contact surfaces before MRA12 is mounted.\u003c\/p\u003e\u003ch2\u003eApproval Information\u003c\/h2\u003e\u003cp\u003eCNC Racing supplies MRA12 without approval paperwork. Whether an individual inspection of MRA12 is possible depends on the testing body. Please make sure that riding with MRA12 is permitted where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 (2010-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157194526986,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157194559754,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1200-enduro-2016-2018-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1200 Enduro (2016-2018) – MRA12","description":"\u003cp\u003eCNC Racing developed the Mirror Blanking Plug M10 Left-Hand Thread MRA12, and this page covers it for the Ducati Multistrada 1200 Enduro (2016-2018). Delivery contents, fitting notes and approval status of MRA12 on the Multistrada 1200 Enduro are covered below. In the next sections you can check how MRA12 is supplied and what fitting it to the Multistrada 1200 Enduro involves.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1200 Enduro (2016-2018)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWorkshop Notes\u003c\/h2\u003e\u003cp\u003eAs an extra part, MRA12 is mounted in the mirror mounting hole of the handlebar. You fit MRA12 in the mirror mounting hole of the handlebar on top of the existing equipment. MRA12 is sold individually. Retaining the correct orientation of MRA12 is important; compare it with the photos. Put small parts of MRA12 into a bowl while working, so none of them disappear.\u003c\/p\u003e\u003ch2\u003eFitment Overview\u003c\/h2\u003e\u003cp\u003eCNC Racing gives the Ducati Multistrada 1200 Enduro (2016-2018) as the fitment for this version of MRA12. Look at the year of manufacture of your Multistrada 1200 Enduro and check it against 2016-2018. Your registration papers confirm whether your motorcycle is listed as Ducati Multistrada 1200 Enduro and built 2016-2018. Also compatible per CNC Racing: Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, each with its own MRA12 page. Fitment information for MRA12 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eOur shop lists MRA12 in black and red.\u003c\/p\u003e\u003ch2\u003eCare Routine\u003c\/h2\u003e\u003cp\u003eA soft cloth is all it takes to wipe fingerprints off MRA12. Regular inspection of MRA12 is part of responsible motorcycle care. Check MRA12 again after the first rides to see that it is still firmly in place.\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eProduction and Material\u003c\/h2\u003e\u003cp\u003eUsing aluminium, CNC Racing gives MRA12 low weight and a precise shape. Aluminium was selected for MRA12 as a light and corrosion-resistant metal. For MRA12, material selection and manufacturing go hand in hand.\u003c\/p\u003e\u003ch2\u003eApproval Situation\u003c\/h2\u003e\u003cp\u003eNo ABE accompanies MRA12, as CNC Racing does not issue one. Please check the regulations that apply where you ride before using MRA12 on the road. Inter-Pace cannot give legal advice on MRA12; your authority or testing body can.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 Enduro (2016-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157195542794,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157195575562,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1200-s-2010-2017-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1200 S (2010-2017) – MRA12","description":"\u003cp\u003eThe maker's code MRA12 belongs to a CNC Racing part listed for the Ducati Multistrada 1200 S (2010-2017): Mirror Blanking Plug M10 Left-Hand Thread. Rather than general promises, this page gives you concrete facts about MRA12 and the Multistrada 1200 S. CNC Racing documents MRA12 per motorcycle, and the following sections apply to the Multistrada 1200 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Multistrada 1200 S, 2010-2017\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eCNC Racing specifies MRA12 for the Ducati Multistrada 1200 S with build dates 2010-2017. Please hold the production year of your Multistrada 1200 S against 2010-2017 before you place the order. Your dealer or registration document can confirm the exact version of your Ducati Multistrada 1200 S. Riders of Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR will find MRA12 in our shop under their own model. Any uncertainty about MRA12? A short enquiry costs nothing and saves time. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003ePick black and red for MRA12 from the variant menu.\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eCNC Racing chose aluminium for MRA12, combining low weight with sufficient strength. The metal used for MRA12 is aluminium, valued in motorsport for its low density. Good material alone is not enough, so CNC Racing also takes care over how MRA12 is finished.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eScouring agents and hard brushes can mark MRA12, so leave them aside. Note any change in how MRA12 sits or works and have it checked. Spare a minute for MRA12 during each service interval.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eFitting MRA12 in the mirror mounting hole of the handlebar adds to the motorcycle without taking anything away. No standard part is lost when MRA12 is attached in the mirror mounting hole of the handlebar. One order of MRA12 brings you one piece. If you lack the tools or experience for MRA12, leave the job to a workshop. If MRA12 replaces something, keep the original part in case you want to go back to standard.\u003c\/p\u003e\u003ch2\u003eRegistration Notes\u003c\/h2\u003e\u003cp\u003eWe receive no ABE for MRA12 from CNC Racing. Track use and road use of MRA12 can be treated differently by law. An expert inspection can clarify if MRA12 is acceptable on your motorcycle in road traffic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 S (2010-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157197541642,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157197574410,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1260-2018-2020-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1260 (2018-2020) – MRA12","description":"\u003cp\u003eThe subject of this page is MRA12: CNC Racing's Mirror Blanking Plug M10 Left-Hand Thread for the Ducati Multistrada 1260 (2018-2020). Before you order for your Multistrada 1260, the notes below help you check fitment, contents and approval of MRA12. The following sections cover material, fitting, care and legal points for MRA12 on the Multistrada 1260.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium, machined on CNC centres\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Multistrada 1260, 2018-2020\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures in Use\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eFitting Advice\u003c\/h2\u003e\u003cp\u003eCNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. MRA12 does not replace anything; it is attached in the mirror mounting hole of the handlebar. MRA12 comes as a single item. Avoid using impact drivers on MRA12. A little assembly paste on the threads can make later removal of MRA12 easier.\u003c\/p\u003e\u003ch2\u003eMaterial Overview\u003c\/h2\u003e\u003cp\u003eAluminium makes up MRA12, a material that does not rust. CNC Racing chose aluminium for MRA12, combining low weight with sufficient strength. Fine finishing gives MRA12 its final appearance.\u003c\/p\u003e\u003ch2\u003eColour Programme\u003c\/h2\u003e\u003cp\u003eThe colour range of MRA12 covers black and red.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eA gentle cleaning routine keeps the surface of MRA12 in good condition. Note any change in how MRA12 sits or works and have it checked. A careful look at MRA12 after off-road or track use is advisable.\u003c\/p\u003e\u003ch2\u003eFitment Information\u003c\/h2\u003e\u003cp\u003eFitment as stated by the maker: MRA12 on the Ducati Multistrada 1260, 2018-2020. Every detail counts: name, variant and build year of your Ducati Multistrada 1260 should all match. Fitment applies to the Ducati Multistrada 1260 as listed; other versions need checking. Owners of Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR can use the same MRA12, listed on its own page. Note MRA12 when you contact us; it avoids mix-ups between similar parts. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eRoad Use Rules\u003c\/h2\u003e\u003cp\u003eA parts certificate (Teilegutachten) for MRA12 is not available from CNC Racing. Check whether MRA12 must be entered in your vehicle documents. Insurance cover can be affected if MRA12 is not permitted where you ride.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157199540490,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157199573258,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1260-enduro-2019-2021-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1260 Enduro (2019-2021) – MRA12","description":"\u003cp\u003eManufacturer CNC Racing names the Ducati Multistrada 1260 Enduro (2019-2021) as a target model for MRA12, the Mirror Blanking Plug M10 Left-Hand Thread. Inter-Pace lists MRA12 separately for each motorcycle, and this page is the one for the Multistrada 1260 Enduro. Inter-Pace has gathered the key points on MRA12 for the Multistrada 1260 Enduro so that you can order with confidence.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1260 Enduro (2019-2021)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel Compatibility\u003c\/h2\u003e\u003cp\u003eThis MRA12 listing is tied to one motorcycle, the Ducati Multistrada 1260 Enduro (2019-2021). Compare your Multistrada 1260 Enduro with the product photos of MRA12 if you want extra certainty. You can find model and type details for your Multistrada 1260 Enduro in the registration document. The search function leads you to MRA12 for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, too. Fitment information for MRA12 comes from the manufacturer and is updated by Inter-Pace when CNC Racing changes it. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eColour and Look\u003c\/h2\u003e\u003cp\u003eColour choice for MRA12 at Inter-Pace: black and red.\u003c\/p\u003e\u003ch2\u003eCare Information\u003c\/h2\u003e\u003cp\u003ePlain water with a drop of neutral cleaner removes everyday dirt from MRA12. Keep an eye on MRA12 after any tip-over in the garage. Salt from winter roads should be rinsed off MRA12 promptly.\u003c\/p\u003e\u003ch2\u003eWorkshop Notes\u003c\/h2\u003e\u003cp\u003eCNC Racing conceived MRA12 as an extra in the mirror mounting hole of the handlebar. Your motorcycle keeps its original parts, and MRA12 is added in the mirror mounting hole of the handlebar. You get one MRA12 per order unit. Clean the contact surfaces before MRA12 is mounted. A workshop manual for your motorcycle is useful when fitting MRA12.\u003c\/p\u003e\u003ch2\u003eRaw Material\u003c\/h2\u003e\u003cp\u003eThe aluminium of MRA12 is light and stiff, which suits a motorcycle part well. Aluminium makes up MRA12, a material that does not rust. Basic properties of MRA12 come from the aluminium, and the finish does the rest.\u003c\/p\u003e\u003ch2\u003eWorking Principle\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eWith MRA12, CNC Racing supplies the part only, without approval documents. For road use of MRA12, the laws of the country of registration apply. The rider is responsible for ensuring that MRA12 complies with local law.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 Enduro (2019-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157201670410,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157201703178,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1260-pikes-peak-2018-2020-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1260 Pikes Peak (2018-2020) – MRA12","description":"\u003cp\u003eCNC Racing uses part number MRA12 for its Mirror Blanking Plug M10 Left-Hand Thread, intended for the Ducati Multistrada 1260 Pikes Peak (2018-2020). On the Multistrada 1260 Pikes Peak, MRA12 takes a defined place; the paragraphs below explain where and how. The data on this page comes from CNC Racing and has been checked by Inter-Pace for the Multistrada 1260 Pikes Peak.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1260 Pikes Peak (2018-2020)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShades on Offer\u003c\/h2\u003e\u003cp\u003eThe colour range of MRA12 covers black and red.\u003c\/p\u003e\u003ch2\u003eInstallation Advice\u003c\/h2\u003e\u003cp\u003eNothing has to be removed: MRA12 joins the standard parts in the mirror mounting hole of the handlebar. CNC Racing supplies MRA12 as an add-on for installation in the mirror mounting hole of the handlebar. Your parcel contains MRA12 as one part. Proper fitting of MRA12 requires clean and undamaged mounting points. Allow enough time for MRA12: careful fitting pays off in a clean result.\u003c\/p\u003e\u003ch2\u003eVehicle Match\u003c\/h2\u003e\u003cp\u003eInter-Pace offers MRA12 on this page for the Ducati Multistrada 1260 Pikes Peak (2018-2020), following the CNC Racing fitment. If the build year of your Multistrada 1260 Pikes Peak sits right on the border of 2018-2020, ask us to double-check. Race-converted examples of the Multistrada 1260 Pikes Peak may no longer have the parts MRA12 is designed around. Separate listings exist for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, all with the same reference MRA12. Advice from us about MRA12 costs nothing and comes with no obligation to buy. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eMaterial at a Glance\u003c\/h2\u003e\u003cp\u003eMRA12 is an aluminium part, lighter than a comparable steel component. The base material of MRA12 is aluminium, chosen for its balance of low mass and rigidity. In MRA12, CNC Racing works the aluminium with precision.\u003c\/p\u003e\u003ch2\u003eCare Routine\u003c\/h2\u003e\u003cp\u003eTo clean MRA12, use a soft cloth rather than brushes or abrasive pads. Lay tools down carefully so they do not scratch MRA12. Every few thousand kilometres, take a closer look at MRA12.\u003c\/p\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003ePublic Roads\u003c\/h2\u003e\u003cp\u003eCNC Racing issues no German approval documents for MRA12. Track use and road use of MRA12 can be treated differently by law. Please make sure that riding with MRA12 is permitted where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 Pikes Peak (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157203013898,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157203046666,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1260-s-2018-2020-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1260 S (2018-2020) – MRA12","description":"\u003cp\u003eFeatured here: MRA12, the Mirror Blanking Plug M10 Left-Hand Thread that CNC Racing lists against the Ducati Multistrada 1260 S (2018-2020). From material to approval, this overview of MRA12 has been put together for the Multistrada 1260 S. Take a moment to read the details on MRA12 before planning the work on your Multistrada 1260 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1260 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. The thread of MRA12 is M10 with 1.25 mm pitch, left-handed, so it is tightened counter-clockwise.\u003c\/p\u003e\u003ch2\u003eAvailable Finishes\u003c\/h2\u003e\u003cp\u003eDepending on stock, MRA12 is available in black and red.\u003c\/p\u003e\u003ch2\u003eKeeping It in Shape\u003c\/h2\u003e\u003cp\u003eRegular cleaning prevents dirt from settling into the details of MRA12. Keep chemicals away from MRA12 when using cleaning products on other parts. Clean MRA12 before storing the motorcycle for longer periods.\u003c\/p\u003e\u003ch2\u003eFitting Tips\u003c\/h2\u003e\u003cp\u003eAll standard parts stay on when MRA12 is fitted in the mirror mounting hole of the handlebar. As an accessory, MRA12 is attached in the mirror mounting hole of the handlebar. Supplied quantity of MRA12: one piece. Hex keys and sockets in good condition make fitting MRA12 easier. If MRA12 replaces something, keep the original part in case you want to go back to standard.\u003c\/p\u003e\u003ch2\u003eProduction and Material\u003c\/h2\u003e\u003cp\u003eThe aluminium construction of MRA12 keeps the added weight small. CNC Racing trusts aluminium for MRA12, a metal that keeps its shape under load. Shaping and finishing of the aluminium in MRA12 happen in several steps.\u003c\/p\u003e\u003ch2\u003eFit Check\u003c\/h2\u003e\u003cp\u003eFitment as stated by the maker: MRA12 on the Ducati Multistrada 1260 S, 2018-2020. Individual Multistrada 1260 S variants may vary in small details, so compare model code and year with the listing. Our advice: take a photo of the mounting area on your Multistrada 1260 S and compare it with the images of MRA12. Further fitments of MRA12 according to CNC Racing include Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. The details on this page for MRA12 are as complete as CNC Racing's data allows. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eApproval Situation\u003c\/h2\u003e\u003cp\u003eCNC Racing has no registration papers for MRA12. National laws decide whether MRA12 may be fitted for road use. The legal situation for MRA12 differs from country to country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157204816138,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157204848906,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-950-2017-2021-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 950 (2017-2021) – MRA12","description":"\u003cp\u003eMRA12 by CNC Racing: the Mirror Blanking Plug M10 Left-Hand Thread, listed for the Ducati Multistrada 950 (2017-2021). Details about how MRA12 is built and how it goes onto the Multistrada 950 are listed further down. Inter-Pace describes MRA12 here so that you can judge whether it suits your Multistrada 950.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Multistrada 950, 2017-2021\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUsing It\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eMaterial Overview\u003c\/h2\u003e\u003cp\u003eFor MRA12, CNC Racing works with aluminium, which machines cleanly and holds tight tolerances. The aluminium construction of MRA12 keeps the added weight small. The choice of aluminium and the production method complement each other in MRA12.\u003c\/p\u003e\u003ch2\u003eLasting Condition\u003c\/h2\u003e\u003cp\u003eDry MRA12 with a soft cloth after washing to avoid water marks. Protect MRA12 from contact with sharp tools during other work on the motorcycle. Long periods outdoors in sun and rain can age the surface of MRA12.\u003c\/p\u003e\u003ch2\u003eShades on Offer\u003c\/h2\u003e\u003cp\u003eMRA12 is listed with this colour range: black and red.\u003c\/p\u003e\u003ch2\u003eWorkshop Notes\u003c\/h2\u003e\u003cp\u003eWith MRA12, the motorcycle gains an additional part in the mirror mounting hole of the handlebar. CNC Racing's MRA12 is an additional part mounted in the mirror mounting hole of the handlebar. The scope of delivery of MRA12 is one part. After fitting, check that moving parts near MRA12 can move freely. Make sure no cables or hoses are trapped when mounting MRA12.\u003c\/p\u003e\u003ch2\u003eChecking Your Model\u003c\/h2\u003e\u003cp\u003eManufacturer fitment for MRA12: Ducati Multistrada 950 (2017-2021). If the build year of your Multistrada 950 sits right on the border of 2017-2021, ask us to double-check. Some Multistrada 950 versions share a name but differ technically, so check the type code. Inter-Pace splits MRA12 into one page per motorcycle, including Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR. Parts with the same name can differ by motorcycle, which is why MRA12 is listed per model. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eLegal Position\u003c\/h2\u003e\u003cp\u003eAs far as approval is concerned, CNC Racing offers no ABE or parts certificate for MRA12. Local regulations on modifications also apply to MRA12. Ask your inspection centre whether MRA12 needs an individual assessment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 950 (2017-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157205995786,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157206028554,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-1200-pikes-peak-2013-2017-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada 1200 Pikes Peak (2013-2017) – MRA12","description":"\u003cp\u003eItem MRA12 is the Mirror Blanking Plug M10 Left-Hand Thread by CNC Racing, offered here for the Ducati Multistrada 1200 Pikes Peak (2013-2017). Details about how MRA12 is built and how it goes onto the Multistrada 1200 Pikes Peak are listed further down. Owners of the Multistrada 1200 Pikes Peak will find the practical information on MRA12 grouped by topic further down.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in black and red\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eFitment per CNC Racing: Ducati Multistrada 1200 Pikes Peak, 2013-2017\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacturing\u003c\/h2\u003e\u003cp\u003eMRA12 owes its low weight to aluminium as the base material. MRA12 consists of aluminium, a material long established in motorcycle accessories. Clean workmanship gives MRA12 a high-quality appearance.\u003c\/p\u003e\u003ch2\u003eHow It Helps\u003c\/h2\u003e\u003cp\u003eAfter the switch to a bar end mirror, MRA12 closes the mirror hole left on the handlebar. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eCleaning and Inspection\u003c\/h2\u003e\u003cp\u003eBrake cleaner and thinners do not belong on MRA12. Inspect the fixings of MRA12 during routine maintenance. Check MRA12 again after the first rides to see that it is still firmly in place.\u003c\/p\u003e\u003ch2\u003eFinish and Colour\u003c\/h2\u003e\u003cp\u003eMRA12 is available in black and red; select your version with the colour option.\u003c\/p\u003e\u003ch2\u003eInstalling It\u003c\/h2\u003e\u003cp\u003eMRA12 is an add-on, and its place is in the mirror mounting hole of the handlebar. The mounting point for MRA12 is in the mirror mounting hole of the handlebar; no original part is removed. Your parcel contains MRA12 as one part. Where MRA12 has several fixings, tighten them crosswise and in stages. Check for correct seating of MRA12 before you tighten everything.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eMRA12 matches the Ducati Multistrada 1200 Pikes Peak (2013-2017) according to its manufacturer. Your dealer or registration document can confirm the exact version of your Ducati Multistrada 1200 Pikes Peak. Special editions of the Multistrada 1200 Pikes Peak occasionally use different parts; check the exact version before ordering. We present MRA12 separately for Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR so that every page shows the right fitment. Keep the order number and MRA12 at hand if you contact us about fitment. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eLegal Points\u003c\/h2\u003e\u003cp\u003eYou will not receive an ABE with MRA12; CNC Racing does not offer one. In some countries MRA12 can be used without further paperwork, in others it cannot. Your local registration authority can tell you whether MRA12 is allowed on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 Pikes Peak (2013-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157206978826,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157207011594,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"},{"product_id":"cnc-racing-mirror-blanking-plug-m10-left-hand-thread-ducati-multistrada-v2-2022-2024-mra12","title":"CNC Racing Mirror Blanking Plug M10 Left-Hand Thread Ducati Multistrada V2 (2022-2024) – MRA12","description":"\u003cp\u003eRiding the Ducati Multistrada V2 (2022-2024)? Then MRA12, the Mirror Blanking Plug M10 Left-Hand Thread from CNC Racing, is matched to your motorcycle. Each section below answers one question about MRA12 and the Multistrada V2, from material to approval. Before you order for your Multistrada V2, the notes below help you check fitment, contents and approval of MRA12.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread, counter-clockwise, M10\u003c\/li\u003e\n\u003cli\u003eCloses the hole left by a handlebar-mounted mirror\u003c\/li\u003e\n\u003cli\u003eFor the change to bar end mirrors\u003c\/li\u003e\n\u003cli\u003eThread pitch 1.25 mm\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eKit consists of 1 plug\u003c\/li\u003e\n\u003cli\u003eColour choice: black and red\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Multistrada V2 (2022-2024)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by CNC Racing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Notes\u003c\/h2\u003e\u003cp\u003eMRA12 is an aluminium part, lighter than a comparable steel component. Aluminium, the material of MRA12, can be machined to fine detail. Each detail of MRA12 is finished with care.\u003c\/p\u003e\u003ch2\u003eBike and Build Year\u003c\/h2\u003e\u003cp\u003eMRA12 is meant for the Ducati Multistrada V2 manufactured 2022-2024. Every detail counts: name, variant and build year of your Ducati Multistrada V2 should all match. Please make sure your Multistrada V2 has not been fitted with parts that change the mounting area of MRA12. Besides this bike, MRA12 suits Aprilia Caponord 1200, Aprilia Dorsoduro 1200, Aprilia Tuono V4 1100 Factory, Aprilia Tuono V4 1100 RR, each shown on its own page. Send model and year, and Inter-Pace will look at MRA12 for your bike. MRA12 fits only mirror holes with a left-hand M10 thread and a pitch of 1.25 mm.\u003c\/p\u003e\u003ch2\u003eFeatures in Use\u003c\/h2\u003e\u003cp\u003eMRA12 covers the hole that remains when a handlebar-mounted mirror is replaced by a bar end mirror. MRA12 has a left-handed M10 thread with a pitch of 1.25 mm and turns counter-clockwise.\u003c\/p\u003e\u003ch2\u003eContents and Fitting\u003c\/h2\u003e\u003cp\u003eInstalled in the mirror mounting hole of the handlebar, MRA12 works alongside the original components. CNC Racing supplies MRA12 as an add-on for installation in the mirror mounting hole of the handlebar. The delivery includes exactly one MRA12. A workshop manual for your motorcycle is useful when fitting MRA12. Hand-tighten the fixings of MRA12 first, then tighten to the specified value.\u003c\/p\u003e\u003ch2\u003eCleaning and Inspection\u003c\/h2\u003e\u003cp\u003eWipe MRA12 down regularly so that dirt does not build up. Lay tools down carefully so they do not scratch MRA12. Keep an eye on MRA12 after any tip-over in the garage.\u003c\/p\u003e\u003ch2\u003eWhich Colour?\u003c\/h2\u003e\u003cp\u003eColour variants of MRA12 on this page: black and red.\u003c\/p\u003e\u003ch2\u003eApproval and Law\u003c\/h2\u003e\u003cp\u003eThe CNC Racing delivery of MRA12 comes without approval documents. Rules for accessories like MRA12 vary across Europe. Modifications such as MRA12 may need to be reported, depending on the country.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e CNC Racing\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e MRA12\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, CNC-machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V2 (2022-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of origin:\u003c\/em\u003e Italy\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":54157207765258,"sku":"MRA12B","price":13.39,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54157207798026,"sku":"MRA12R","price":13.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/cnc-racing-v-mra12b.png?v=1794930671"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/3813N.png?v=1785223281","url":"https:\/\/inter-pace.com\/en-fi\/collections\/bodywork-accessories.oembed?page=2","provider":"Inter-Pace","version":"1.0","type":"link"}