{"product_id":"ohlins-shock-spring-44-n-mm-150-mm-57-mm-01093-06","title":"Öhlins Shock Spring 44 N\/mm \/ 150 mm \/ Ø 57 mm – 01093-06","description":"\u003cp\u003eÖhlins part number 01093-06 is a shock absorber spring rated at 44 N\/mm, 150 mm long with a 57 mm inner diameter. Adding a pillion or luggage changes the load enough that the standard rate stops working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 44 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01093-06\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003e90 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eFree length 150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eRates are offered in defined steps, so a change can be made in one direction at a time. Öhlins machines its own critical components instead of buying them in, and the tolerances are where the money goes. Production has stayed in Sweden since the company was founded in 1976.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eAt 150 mm free length and 57 mm inner diameter, this spring is dimensionally interchangeable with anything of the same size — the rate is what makes it a different part.\u003c\/p\u003e\u003ch2\u003eChoosing 44 N\/mm\u003c\/h2\u003e\u003cp\u003eThis is the middle of Öhlins' range — the rate most riders of average weight end up on once sag is set properly. If you are unsure and close to average weight in full kit, this is the sensible starting point. This is where most riders of average weight land once static sag has been set to specification. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eÖhlins supplies most of its shocks without a spring precisely so the rate can be matched to the rider rather than averaged. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eIf you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. Rather than a model list, use the measurements: a fork that accepts this diameter and length is a candidate, and the rate follows from rider weight. This spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003ePreload spacers usually need shortening or lengthening so the installed length stays correct. Spring preload spacers may need adjusting to keep the installed length correct. Fork oil should be replaced at the same time — it is already out of the leg.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: none is issued for springs as such — they replace an existing component of the same function. Any model-specific approval is listed under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01093-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 44 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 90 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645336609034,"sku":"01093-06","price":12282.0,"currency_code":"ETB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_fa680534-eced-4bc7-b84e-7d49c919cfaa.png?v=1788866651","url":"https:\/\/inter-pace.com\/en-et\/products\/ohlins-shock-spring-44-n-mm-150-mm-57-mm-01093-06","provider":"Inter-Pace","version":"1.0","type":"link"}