{"product_id":"ohlins-shock-spring-95-n-mm-190-mm-57-mm-01096-31","title":"Öhlins Shock Spring 95 N\/mm \/ 190 mm \/ Ø 57 mm – 01096-31","description":"\u003cp\u003eÖhlins part number 01096-31 is a shock absorber spring rated at 95 N\/mm, 190 mm long with a 57 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 95 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01096-31\u003c\/li\u003e\n\u003cli\u003e90 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eThe wire is progressively wound where the application calls for it and straight where it does not. Each spring is set before it is measured, so it will not settle and lose rate in service. Production is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement.\u003c\/p\u003e\u003ch2\u003eThe Numbers That Matter\u003c\/h2\u003e\u003cp\u003eThe 57 mm bore and 190 mm length are the two figures that decide whether it physically fits; 95 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eThis end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. If the suspension bottoms out or the geometry collapses under load, this is the direction to go. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eA spring that has settled in service sits shorter than new, which quietly lowers the bike and steepens the steering. Progressive springs change rate through the stroke, which suits machines with little travel and a lot of load. Rear spring rates run in the tens or hundreds of N\/mm because the spring sits at the short end of that lever, not at the wheel.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eIf you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. Öhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider?\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eOil level is measured from the top of the tube with the fork compressed and the spring removed. Note the original oil level before draining — it is a useful reference even when Öhlins specifies its own. Work on both legs in one session so the fork stays symmetrical.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01096-31\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 95 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 90 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645347291402,"sku":"01096-31","price":75.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_ed5c455a-dac8-4657-a30e-915c5347d3d2.png?v=1788866698","url":"https:\/\/inter-pace.com\/en-ec\/products\/ohlins-shock-spring-95-n-mm-190-mm-57-mm-01096-31","provider":"Inter-Pace","version":"1.0","type":"link"}