{"product_id":"ohlins-shock-spring-95-n-mm-150-mm-57-mm-01093-31","title":"Öhlins Shock Spring 95 N\/mm \/ 150 mm \/ Ø 57 mm – 01093-31","description":"\u003cp\u003eÖhlins part number 01093-31 is a shock absorber spring rated at 95 N\/mm, 150 mm long with a 57 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 95 N\/mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003e76 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eFree length 150 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01093-31\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eService parts stay available for years after a part number leaves the current price list. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. Öhlins machines its own critical components instead of buying them in, and the tolerances are where the money goes.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 57 mm bore and 150 mm length are the two figures that decide whether it physically fits; 95 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eSupport under braking improves; small-bump comfort gives a little back. Firm rates also suit machines carrying luggage as a matter of course. If the suspension bottoms out or the geometry collapses under load, this is the direction to go. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eProgressive springs change rate through the stroke, which suits machines with little travel and a lot of load. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. Rear spring rates run in the tens or hundreds of N\/mm because the spring sits at the short end of that lever, not at the wheel.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it. Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. Rather than a model list, use the measurements: a fork that accepts this diameter and length is a candidate, and the rate follows from rider weight.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eCheck the free length against the old springs before fitting — a sagged original often measures short. The job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level. The springs come powder-coated and need no preparation before they go in.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01093-31\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 95 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645339132170,"sku":"01093-31","price":10200.0,"currency_code":"DZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_b4e12e6c-7825-40e2-8c71-be8f1d7c21d5.png?v=1788866661","url":"https:\/\/inter-pace.com\/en-dz\/products\/ohlins-shock-spring-95-n-mm-150-mm-57-mm-01093-31","provider":"Inter-Pace","version":"1.0","type":"link"}