Accossato clutch lever ESK750 with black blade and black hub for Kawasaki Z1000R (2017-2019)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC clutch lever for the original mounting
Part numberESK750
FunctionClutch lever, left hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentKawasaki Z1000R (2017–2019)
Road approvalNone documented, track use only
DescriptionThe whole story▼

Early starts are part of riding: the Sunday run that begins before breakfast, the trip that leaves at first light to beat the traffic. On a Z1000 R, a litre-class four, a quiet departure from a sleeping street depends mostly on the left hand, because the bike has to roll away at low revs without a stall and without a burst of throttle. The Accossato ESK750 is a clutch lever for the Z1000 R of 2017 to 2019, milled from aluminium and anodised. It goes on the original clutch mounting, and its span can be set to suit your fingers.

Key Features

  • Clutch lever for the Kawasaki Z1000 R, model years 2017 to 2019
  • Mounts at the original clutch mounting
  • Span adjustable by an adjuster beside the pivot
  • Short, standard (about 138 mm) or long blade, depending on the colour
  • Seven blade colours on a black anodised hub
  • Milled aluminium, one rigid piece
  • Supplied in its own Accossato box
  • No German ABE documented, sold for the track

Construction and Material Quality

Anodising is an electrochemical treatment rather than a coating. On the ESK750 it converts the aluminium's surface into a hard oxide that takes up the colour, which is why the finish neither peels nor chips the way paint can. A deep gouge will still reach bare metal, but the daily rubbing of gloves leaves little trace. Before that step the lever for the Z1000 R is CNC-machined. Its hub, with the pivot and span adjuster, always comes out black, and the blade carries the colour. No hinge interrupts the blade, so the lever moves as one solid part.

Leaving Quietly at Dawn

A quiet getaway is a matter of doing little, slowly. Let the engine settle at idle for a moment, select first gently, then ease the clutch out until the bike begins to creep, with the throttle barely open or not at all. Hold that creep to the end of the street before letting the Z1000 R rev. It sounds simple, but it asks for fine control over the first part of the clutch engagement, and that is where lever position matters. Set the ESK750 so the take-up arrives with your fingers slightly curled; there they have the most feel, and the release can be spread over a longer, calmer movement. The long blade helps further, because with the fingers further from the pivot the same clutch movement is spread over more finger travel. It is made in blue, gold, green and orange, while black and red come as standard levers only.

Fitment and Compatibility

Model years in Accossato's list: 2017 to 2019, under the name Z 1000 R. The ESK750 replaces the stock lever at the Z1000 R's original clutch mounting. The brake side is covered by the EDF088, which is listed for the same motorcycle over a longer span, 2017 to 2023; for the later bikes, Accossato lists the ESK828 clutch lever under the Z1000 R Edition name, also up to 2023. Both levers share the black hub and the colour range if you want a matched pair.

Road Approval

No German ABE has been documented for the ESK750; the lever is therefore sold for circuit use.

Scope of Delivery

In the box: the ESK750 clutch lever for the Z1000 R, in the colour and blade length of your order.

Specifications

  • Part number: ESK750
  • Type: fixed clutch lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Kawasaki Z1000R, 2017 to 2019
What's includedEverything in the box▼
  • 1x Accossato CNC clutch lever in its own box
FitmentWhich bikes this fits▼
  • Kawasaki Z1000R (2017–2019)
  • Kawasaki ER-6 F (2006–2016)
  • Kawasaki ER-6N (2006–2016)
  • Kawasaki NINJA 650 (2017–2020)
  • Kawasaki VERSYS 1000 (2015–2018)
  • Kawasaki VERSYS 650 (2006–2020)
  • Kawasaki VULCAN S (2015–2020)
  • Kawasaki VULCAN S CAFE (2017–2019)
  • Kawasaki W800 (2012–2016)
  • Kawasaki Z1000SX (2017–2019)
  • Kawasaki Z650 (2017–2020)
  • Kawasaki Z900 (2017–2020)
  • Kawasaki Z900RS (2018–2020)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.