{"product_id":"spark-exhaust-bent-tube-90-degrees-28mm","title":"Spark Exhaust Bent Tube 90° Ø 28 × 1.5 mm Stainless Steel Universal G9119","description":"\u003cp\u003eA right angle at twenty-eight millimetres. The smallest hard corner Spark forms, in the one small diameter it builds with a heavy wall.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMandrel-formed 90° bend, AISI 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003eØ 28 mm outside, 1.5 mm wall thickness.\u003c\/li\u003e\n\u003cli\u003eStraight tangents at both ends for cutting and welding.\u003c\/li\u003e\n\u003cli\u003eMatches Spark's 28 mm straight tube, article G9010.\u003c\/li\u003e\n\u003cli\u003eSpark part number G9119, made in Mantova, Italy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhen Only a Right Angle Fits\u003c\/h2\u003e\u003cp\u003eA ninety costs more flow than any other bend, and it is bought anyway because the alternative does not fit. In the confined spaces small-bore work lives in — between a crankcase and a frame rail, behind a cylinder, under a gearbox — there is often no room for two forty-fives and a straight.\u003c\/p\u003e\u003cp\u003eWhere there is room, use the pair. Where there is not, this is the article.\u003c\/p\u003e\u003ch2\u003eCrossing Two Pipes\u003c\/h2\u003e\u003cp\u003eA balance pipe between two headers usually has to leave one pipe, cross, and enter the other at right angles. Two of these and a short straight is the whole assembly, and at this diameter the parts are small enough to work between the cylinders of a twin.\u003c\/p\u003e\u003ch2\u003eThe Heavy Wall Again\u003c\/h2\u003e\u003cp\u003eA millimetre and a half rather than one. At twenty-eight millimetres the thinner wall would fold on the inner heel of a bend this sharp — the ratio of diameter to wall is what governs collapse, and a right angle is where it is tested hardest.\u003c\/p\u003e\u003ch2\u003eWeld Access in a Corner\u003c\/h2\u003e\u003cp\u003eA right angle welded close to another component leaves nowhere to put a torch. Plan the sequence before assembling: weld the joints that will become inaccessible first, and leave the open ones until last.\u003c\/p\u003e\u003cp\u003eIt is the single most common reason a fabricated system has one bad-looking bead in it.\u003c\/p\u003e\u003ch2\u003eCutting It Into Two Forty-Fives\u003c\/h2\u003e\u003cp\u003eA 90° bend cut in half at the apex gives two 45s, each with one straight tangent. Whether that is useful depends on the build, but it is worth knowing before ordering three separate articles for a job that needs one.\u003c\/p\u003e\u003ch2\u003eChecking It Against a Square\u003c\/h2\u003e\u003cp\u003eStand the bend on a flat surface with one tangent down and hold an engineer's square against the other. A formed ninety is generally within a degree of true; a hand-bent one rarely is, and the error only becomes visible once it has been welded into a run.\u003c\/p\u003e\u003ch2\u003eOrdering\u003c\/h2\u003e\u003cp\u003eOne bend per article. Spark builds 30°, 45° and 90° at this diameter.\u003c\/p\u003e","brand":"Spark Exhaust","offers":[{"title":"Default Title","offer_id":53618246779146,"sku":"G9119","price":289.73,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/6087b8e459e06_2b2add92-bc64-40ee-b2b0-e8f3eaad20a6.png?v=1788348494","url":"https:\/\/inter-pace.com\/en-dk\/products\/spark-exhaust-bent-tube-90-degrees-28mm","provider":"Inter-Pace","version":"1.0","type":"link"}