⟲ 360° — drag meThe facts.
| Brand | SC-Project |
|---|---|
| Part number | D26C-LT41T |
| System type | Half-system (2-1 header + slip-on silencer) |
| Material | Titanium (body and collector), carbon (end cap) |
| Outlet diameter | 70 mm |
| System weight | 1.7 kg (stock: 5.7 kg, saving: 4.0 kg) |
| Power gain | +14.2 hp at 13,750 rpm |
| Torque gain | +12.5 Nm at 6,500 rpm |
| Intended use | Racing use only — not road legal |
DescriptionThe whole story▼
Born from seasons of WSBK Championship development, the SC-Project S1 half-system for the Ducati Panigale V4/S (2021) is a masterclass in titanium craft and racing heritage. Part number D26C-LT41T pairs a full titanium collector and silencer body with a carbon end cap finish that is as visually arresting as it is thermally precise — the kind of exhaust that defines a race-prepared Panigale before a wheel has turned.
Key Features
- Titanium 2-1 half-system construction: dramatically lighter than the stock unit at just 1.7 kg versus 5.7 kg stock, a saving of 4.0 kg
- Measured gains of +14.2 hp at 13,750 rpm and +12.5 Nm torque at 6,500 rpm over the standard exhaust
- 70 mm outlet diameter for unrestricted exhaust flow and the full, raw SC-Project racing note without a dB killer
- Carbon end cap delivers a purposeful, race-pit aesthetic alongside outstanding heat resistance
- T.I.G.-welded joints and CNC-machined titanium sleeves ensure precision fitment and long-term structural integrity
- Titanium collector with welded segment bends optimises exhaust scavenging and throttle response throughout the rev range
Design, Finish and Heritage
SC-Project's racing pedigree runs deep, and the S1 half-system wears it openly. The raw titanium finish — developed through years of WSBK pit-lane refinement — has an understated, industrial beauty that no powder-coated steel exhaust can replicate. The carbon end cap adds a deliberate contrast: dark, woven texture against the warm silver of the titanium body, a combination that reads as thoroughly professional rather than merely decorative.
Every weld on the collector is placed by T.I.G. process for a clean, consistent bead that holds under sustained high-temperature cycling. CNC-machined titanium sleeves at the joints eliminate any tolerance stack-up, so the system sits flush and square against the Panigale's under-tail architecture from the first fitting. This is the kind of build quality you notice when you remove the factory exhaust and place the two side by side.
Performance and Engineering
The 2-1 configuration consolidates the V4's four exhaust pulses into a single optimised flow path before they reach the 70 mm outlet. The result is improved exhaust scavenging across the mid-range and a notably more aggressive throttle pickup from 6,500 rpm upward — exactly where the Panigale V4/S wants to be exploited on track. The weight saving of 4.0 kg sits low and central, contributing measurably to mass centralisation and changes-of-direction feel.
The 70 mm end outlet runs without a dB killer, producing the full unfiltered SC-Project racing sound that has become one of the most recognisable exhaust signatures in World Superbike. Deep, layered and entirely uncompromised.
Important Notice
This exhaust system is developed exclusively for racing use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads. For racing use only.
Fitment and Compatibility
- Ducati Panigale V4 (2021)
- Ducati Panigale V4 S (2021)
Specifications
| Attribute | Detail |
|---|---|
| Brand | SC-Project |
| Part number | D26C-LT41T |
| System type | Half-system (2-1 header + slip-on silencer) |
| Material | Titanium (body and collector), carbon (end cap) |
| Outlet diameter | 70 mm |
| System weight | 1.7 kg (stock: 5.7 kg, saving: 4.0 kg) |
| Power gain | +14.2 hp at 13,750 rpm |
| Torque gain | +12.5 Nm at 6,500 rpm |
| Intended use | Racing use only — not road legal |
What's includedEverything in the box▼
- SC-Project S1 slip-on silencer (titanium with carbon end cap)
- Titanium collector with welded segment bends
- Mounting springs and bolts
- SC-Project sticker
- 24-month official SC-Project warranty
FitmentWhich bikes this fits▼
- Ducati Panigale V4/S (2021)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.