{"product_id":"ohlins-o-ring-2-0x1-3-nbr-70-00338-95","title":"Öhlins O-ring 2.0x1.3 NBR-70 – 00338-95","description":"\u003cp\u003eO-ring 2.0x1.3 NBR-70, Öhlins part number 00338-95. The groove does half the work: the ring only seals if the groove is clean and undamaged.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCross Section 1.3 mm\u003c\/li\u003e\n\u003cli\u003eInner Diameter 2.0 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00338-95\u003c\/li\u003e\n\u003cli\u003eMaterial NBR 70\u003c\/li\u003e\n\u003cli\u003eOriginal Öhlins service part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere It Sits\u003c\/h2\u003e\u003cp\u003eÖhlins gives it as 2.0 mm, 1.3 mm, NBR 70; nothing about that is approximate. Replacing seals at service intervals is far cheaper than replacing what a failed seal damages. Nitrile, Viton and PTFE behave differently with temperature, and Öhlins picks per position. Öhlins uses seals with a spring-loaded lip so they follow the shaft as it wears.\u003c\/p\u003e\u003ch2\u003eWhy the Original\u003c\/h2\u003e\u003cp\u003eÖhlins supports units that are decades old, which is why the spare parts list runs to thousands of numbers. Rebuilding to specification only works if the parts are to specification — that starts here. Öhlins numbers do not follow a logic you can guess — always read them from the documentation. The Öhlins exploded view names the number for each position; we can look it up if you do not have it.\u003c\/p\u003e\u003ch2\u003eHow to Be Sure It Fits\u003c\/h2\u003e\u003cp\u003e00338-95 is the Öhlins number for this position — the same one printed in the service documentation. The published dimensions are inner diameter 2.0 mm, cross section 1.3 mm, material NBR 70 — measure the old part against them if you are unsure. Replacing seals at service intervals is far cheaper than replacing what a failed seal damages. O-ring sizes are given as inner diameter and cross-section, and both have to match — a close size is not a match.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its units are serviced by an authorised centre. We are one: rebuild, revalve and setup all happen in our own workshop.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00338-95\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCategory:\u003c\/em\u003e O-Rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCross Section:\u003c\/em\u003e 1.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e NBR 70\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53646888665354,"sku":"00338-95","price":9.61,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/00338-95_4e24246c-dbab-4006-8732-405479fedee8.png?v=1788869234","url":"https:\/\/inter-pace.com\/en-dk\/products\/ohlins-o-ring-2-0x1-3-nbr-70-00338-95","provider":"Inter-Pace","version":"1.0","type":"link"}