TK Dischi Freno SSP 5.5 Brake Disc Kit for MV Agusta F3 675/800 (2012–2026)

Born from MotoGP and WSBK development, the TK Dischi Freno SSP 5.5 brake disc kit transforms the stopping power of your MV Agusta F3 675 or F3 800 with race-grade precision engineering — delivering consistent, fade-resistant braking whether you are chasing lap times on the circuit or threading through mountain passes on the road.

Key Features

• Race-derived technology directly inspired by MotoGP and WSBK programmes, engineered to perform under sustained high-temperature braking loads.
• Precision-drilled ventilation holes reduce operating temperature by up to 20%, keeping braking performance consistent across long stints on track.
• Reduced rotating mass lowers unsprung weight at the front axle, sharpening steering response and improving overall chassis control through corners.
• Innovative material combination extends brake pad life, reducing both running costs and service intervals for riders who cover high mileage or frequent track days.
• Colour-matched inner carrier available in hard-anodised, black, red, or blue to complement the F3's striking bodywork.
• Sold as a complete matched pair — left and right disc — for a balanced, symmetrical braking setup straight from the box.

Track Performance & Build Quality

The SSP 5.5 designation reflects the disc's 5.5 mm friction ring thickness — a specification chosen to strike the optimum balance between thermal mass, stiffness, and weight saving on a high-revving inline-three like the MV Agusta F3. The 320 mm diameter maximises lever at the caliper without compromising ground clearance, while the 34 mm friction ring width provides ample pad contact area for strong initial bite and progressive modulation. Each disc is manufactured using advanced production technology that has been validated on race circuits and rolling-road dynos, ensuring reliability that meets the demands of the most committed riders.

Road & Track Versatility

Although the SSP 5.5 kit traces its lineage to the racetrack, it is equally at home on the road. The drilled ventilation pattern sheds heat on back-to-back braking zones and simultaneously clears water and debris in wet conditions, maintaining dependable stopping distances all year round. The choice of inner carrier colour — hard-anodised natural, gloss black, red, or blue — means you can integrate the upgrade cleanly with the F3's existing colour scheme or create a deliberate contrast.

Important Notes

Before fitting, verify that your existing brake calipers are compatible with a 5.5 mm disc thickness. Please be aware that red and blue colour options may carry an extended lead time — contact Inter-Pace prior to ordering if your schedule is time-critical.

Fitment & Compatibility

• MV Agusta F3 675 (2012–2026)
• MV Agusta F3 800 (2012–2026)

Part Numbers by Colour

• Hard-anodised: M02EL_M02ER_SSP_ha
• Black: M02EL_M02ER_SSP_b
• Red: M02EL_M02ER_SSP_r
• Blue: M02EL_M02ER_SSP_bl

Specifications