{"product_id":"zcoo-ex-front-brake-pads-yamaha-xt1200z-super-tenere","title":"ZCOO EX Race Front Brake Pads Yamaha XT1200Z SUPER TENERE (2014-2019) - Z-S001-EX","description":"\u003cp\u003eOn the Yamaha XT1200Z SUPER TENERE braking is something the rider does constantly and rarely dramatically. ZCOO lists the S001 here, cut to 69.5 by 50.5 mm for the Sumitomo caliper carried by the Yamaha XT1200Z SUPER TENERE. On the XT1200Z SUPER TENERE that shape comes in EX Race, the mixture ZCOO sells for road, trackday and club racing rather than for sprint distance alone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe S001 is dimensionally stable under the clamping load a Sumitomo caliper generates\u003c\/li\u003e\n\u003cli\u003eShipped in ZCOO's own packaging with the ZRM-S001C code printed on it, so a repeat order needs no guesswork\u003c\/li\u003e\n\u003cli\u003eHolds its friction level through the heat cycles an XT1200Z SUPER TENERE front end goes through in a single hard ride\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the standard Sumitomo pad on the Yamaha XT1200Z SUPER TENERE - no shims, no spacers, no modification\u003c\/li\u003e\n\u003cli\u003eThe S001 shape also serves 27 further machines in the ZCOO 2026 catalogue, so availability stays good\u003c\/li\u003e\n\u003cli\u003e69.5 by 50.5 mm friction face at 8.8 mm total thickness, cut for the Sumitomo caliper of the Yamaha XT1200Z SUPER TENERE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eZCOO builds the S001 the same way whether it ends up on an XT1200Z SUPER TENERE or on a race bike. Because the S001 is sintered rather than resin-bonded, there is no binder to cook out at the top of the range. On the XT1200Z SUPER TENERE that translates into a lever position which does not creep as the pad thins.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eThe initial bite of the S001 in EX Race is measured rather than sharp. The compound lays a thin ceramic film on the rotor as it beds, which is why the Yamaha XT1200Z SUPER TENERE sees far less disc wear than a conventional sinter would cause. With a passenger aboard the Yamaha XT1200Z SUPER TENERE, predictable is worth more than powerful.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eListed by ZCOO for the Yamaha XT1200Z SUPER TENERE, model years 2014 to 2019, on the Sumitomo caliper. Front axle only; the S001 has no rear counterpart in the ZCOO programme. The same S001 shape covers 27 further machines in the 2026 catalogue. Before ordering, check that your caliper takes a pad of 69.5 mm length and 50.5 mm height.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-S001-EX (EAN 4950545750129)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-S001C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 69.5 x 50.5 x 8.8 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Sumitomo (Yamaha)\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha XT1200Z SUPER TENERE, 2014-2019\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53638698729738,"sku":"Z-S001-EX","price":80.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/S001-produkt_a7a85a35-d7e2-4bc9-8d06-dc61070bbb91.png?v=1788781265","url":"https:\/\/inter-pace.com\/en-co\/products\/zcoo-ex-front-brake-pads-yamaha-xt1200z-super-tenere","provider":"Inter-Pace","version":"1.0","type":"link"}