Accossato off-road folding brake lever B8207 with black blade for Honda CRF250R (2007-2022)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeCNC folding off-road brake lever for the original master cylinder
Part numberB8207
FunctionFront brake lever, right hand
MaterialMachined from solid Ergal 7075 aluminium alloy
Blade coloursBlack, red
Lever designShorter lever for three fingers
FoldingHinged blade tips forward in a fall (anti-break design)
FitmentHonda CRF250R (2007–2022)
Road approvalNone documented, off-road use only
DescriptionThe whole story▼

A practice day at the motocross track is mostly repetition: lap after lap on a Honda CRF250R, trying a different line into the same corner and braking a little later each time until something goes wrong. Most of those somethings are small, and many end with the bike on its side. Accossato's B8207 is a folding front brake lever for the CRF250R from 2007 to 2022, milled from Ergal 7075 in Italy. When the bike goes down, its joint can let the blade fold forward instead of taking the knock at its tip.

Key Features

  • Folding front brake lever for the Honda CRF250R, 2007 to 2022
  • Fits the original master cylinder in place of the stock lever
  • Anti-break joint between the dark base and the coloured blade
  • Short, three-finger blade
  • CNC-machined from a solid block of Ergal 7075 in Italy
  • Available with a black or red blade
  • No German ABE documented; for motocross and off-road use

Construction and Material Quality

A brake lever is a small part that handles large forces. Every squeeze of the fingers is multiplied by the lever before it reaches the master cylinder piston, and every crash loads the blade from an unexpected direction. That is why Accossato mills the B8207 from solid Ergal 7075, a high-strength aluminium alloy, on CNC machines in Italy, aiming for a lever that is strong, light and reliable. It is built in two parts, a dark base on the master cylinder pivot and a black or red blade joined to it by the folding joint. It is the shorter of Accossato's off-road levers, made for three fingers.

A Practice Day of Small Mistakes

Practice is where riders find their limits, and finding a limit means occasionally stepping over it. On a practice day a CRF250R rider might try to carry more speed into a rutted turn, brake later for a tight left or hold a tighter line round a berm. When the front washes out or a boot catches a rut, the bike slides to a halt on its side. Nobody is hurt, the engine is restarted and the lap continues. By the end of the day, a lever may have hit the ground several times.

A conventional lever tends to bend a little further each time or snap outright, and a bent brake lever changes the feel of the brake, which is the last thing you want while learning to brake later. The B8207's joint can let the blade fold forward on impact, after which it is swung back into place by hand, so the lever you finish the session with has a fair chance of being the one you started with. It will not survive every hit. It can reduce how many levers a season of learning costs, and for a young rider or a club racer on a tight budget, that counts.

Fitment and Compatibility

Accossato lists the B8207 for the Honda CRF250R from 2007 to 2022 and fits it to the original front brake master cylinder. For the clutch side there is the C7210, listed for the CRF250R from 2004 to 2022 and also offered in black or red. Owners of a 2004 to 2006 CRF250R will find only the clutch lever for their bike in this range.

Road Approval

The B8207 has no documented German ABE. Like the CRF250R itself, it belongs on motocross tracks and closed off-road ground.

Scope of Delivery

One B8207 brake lever, black or red blade.

Specifications

  • Part number: B8207
  • Type: CNC folding off-road brake lever for the original master cylinder
  • Material: machined from solid Ergal 7075 aluminium alloy, made in Italy
  • Blade colours: black, red
  • Lever design: shorter lever for three fingers
  • Folding: hinged blade that can tip forward in a fall (anti-break design)
  • Road approval: none documented, off-road use only
  • Fitment: Honda CRF250R (2007–2022)
What's includedEverything in the box▼
  • 1x Accossato CNC off-road brake lever
FitmentWhich bikes this fits▼
  • Honda CRF250R (2007–2022)
  • Honda CRF250RX (2019–2022)
  • Honda CRF450R (2007–2022)
  • Honda CRF450RX (2017–2020)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.