{"product_id":"ls2-ff901-advant-x-carbon-future-ii-red-helmet","title":"LS2 FF901 Advant X Carbon Future II Red – Flip-Up Touring Helmet ECE 22.06 P\/J","description":"\u003cp\u003eThe same faceted Future II geometry, this time in red laid straight onto the bare weave with no white to soften it. Two materials, two states: gloss red where the panels fall, exposed 6K carbon everywhere else. It is the most graphic of the three Future II helmets and the one that reads fastest from a distance.\u003c\/p\u003e\n\n\u003ch3\u003eThe chin bar that folds out of the airstream\u003c\/h3\u003e\n\u003cp\u003eAlmost every flip-up helmet parks its chin bar on top of the head. The Advant X does not: the bar swings back through a full 180 degrees and comes to rest against the back of the shell, low and flat, behind your ears. Watch someone do it once and the reason is obvious — a chin bar sitting up on the crown is a slab of plastic in clean air, and at 100 km\/h it lifts, drums and tugs at your neck.\u003c\/p\u003e\n\u003cp\u003eFolded away at the rear it sits in the shell's own wake, where the air is already disturbed. That is what makes riding with the helmet open a genuine option here rather than a car-park convenience: you can leave it open through a town, up a mountain pass, in a queue at a border, and close it again with one gloved hand when the road opens up. The bar is carbon like the rest of the shell, so the mass being swung is small, and the pivot is damped rather than sprung — it travels where you put it instead of slamming.\u003c\/p\u003e\n\n\u003ch3\u003eP and J: one helmet, two homologations\u003c\/h3\u003e\n\u003cp\u003eECE 22.06 P\/J is printed on the strap label, and it is worth understanding what you are buying. Modular helmets can be approved in two ways. \"P\" alone certifies the helmet as protective with the chin bar closed and says nothing about riding it open. \"P\/J\" certifies it twice: once as a full-face with the bar down, once as a jet helmet with the bar rotated back. This helmet holds both.\u003c\/p\u003e\n\u003cp\u003eThat has a legal consequence and an engineering one. Legally, riding with the chin bar open is within the approval across the EU rather than a grey area. From an engineering standpoint, the chin bar had to survive the standard's impact and locking tests to earn the P — so the mechanism holding it shut is a certified structure, not a convenience catch.\u003c\/p\u003e\n\n\u003ch3\u003eAbout the Future II Red finish\u003c\/h3\u003e\n\u003cp\u003eDropping the white changes the whole balance. Without a light base the carbon becomes the field and the red becomes the figure, so the twill is visible across most of the shell instead of between panels — this is the Future II for people who bought a carbon helmet and want it to look like one. The red itself is a saturated gloss, not a metallic, which keeps the facet edges hard against the dark weave and stops the pattern turning muddy in overcast light. On a red or black motorcycle it is close to a factory match; on anything else it is a deliberate contrast rather than an accident. Two things worth knowing: red is the single most-picked helmet colour in this shop, so resale interest is strong, and a predominantly dark shell benefits from the reflective stickers supplied in the box more than a white one does. Apply them.\u003c\/p\u003e\n\n\u003ch3\u003eCarbon 6K — chin bar included\u003c\/h3\u003e\n\u003cp\u003eUnder the lacquer is 6K carbon twill, and it goes all the way round: crown, sides, rear, and the chin bar. The weave you can see through the clear coat is structural, not a cosmetic layer over fibreglass — a distinction worth making, because \"carbon look\" helmets exist and this is not one of them.\u003c\/p\u003e\n\u003cp\u003eThe engineering case for carbon on a flip-up is stronger than on a full-face. Every modular helmet carries a weight penalty it cannot design away: hinges, a latch, a drop-down sun visor and its housing, and a chin bar that must be stiff enough to certify. Carbon is how you claw that penalty back, and 1550 grams for a P\/J flip-up is the evidence that it worked.\u003c\/p\u003e\n\n\u003ch3\u003eWhat SHARP found, and why we are not claiming it\u003c\/h3\u003e\n\u003cp\u003eWorth knowing before you compare this helmet with others: it has no independent safety rating of its own. SHARP lists an \"ADVANT X\" at four stars from a July 2024 test under ECE 22.06 — perfect fives at every zone at 6.0 and 7.5 m\/s, threes at left and right at 8.5 m\/s, and the chin bar fully locked in 63 % of impacts — but the helmet on that rig was composite fibre at 1.6 kg.\u003c\/p\u003e\n\u003cp\u003eThis one is carbon 6K at 1550 g. Same model name, different shell, and shell construction is precisely the variable SHARP is measuring. Copying the stars across would tell you something we do not actually know. So: certified to ECE 22.06 P\/J, no independent star rating, and the composite version's result linked for context. Anyone selling you the carbon Advant X with four SHARP stars attached has not checked. \u003cstrong\u003eWe stock that helmet:\u003c\/strong\u003e it is the LS2 FF901 Advant X in HPFC composite, same chin bar, same P\/J approval, 50 g heavier and 70 € cheaper — and it is the one carrying the stars.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the ECE 22.06 plaque actually means\u003c\/h3\u003e\n\u003cp\u003eEvery helmet on this page carries ECE 22.06, and it is worth knowing what that plaque now costs a manufacturer. The standard it replaced, 22.05, struck the shell at five fixed points and measured only how hard the head was stopped. 22.06 strikes up to eighteen points, at more than one speed, and adds a test that did not exist before: the helmet is dropped onto an angled anvil faced with abrasive paper, so the laboratory can measure how far the head is \u003cem\u003espun\u003c\/em\u003e as well as how hard it is stopped.\u003c\/p\u003e\n\u003cp\u003eThat matters because rotational acceleration is what tears the bridging veins between brain and skull, and until 2021 no European standard measured it at all. 22.06 also tests the visor, and any accessory fitted to the helmet is tested in place rather than removed for the exam. Since January 2024 a new helmet cannot legally be sold in the EU without it.\u003c\/p\u003e\n\n\u003ch3\u003eGetting the helmet off a fallen rider\u003c\/h3\u003e\n\u003cp\u003eThe chin strap closes with a micrometric metal buckle: a toothed tongue that clicks into a sprung catch, adjustable in millimetre increments, releasable with one gloved finger. It is the fastener touring riders ask for, because a helmet that comes on and off twenty times a day should not need a double-D knot each time — and metal rather than plastic is what keeps the adjustment honest over years.\u003c\/p\u003e\n\u003cp\u003eBehind the cheek pads sits the emergency release. Pull tabs let the pads be extracted from the sides while the helmet is still on your head, which is how a trained responder removes a helmet from an unconscious rider with the least movement of the cervical spine. On a modular helmet it is doubly useful — the chin bar can be rotated clear first, and then the pads come out. You will never operate it yourself. That is rather the point.\u003c\/p\u003e\n\n\u003ch3\u003eThree screens, one shell\u003c\/h3\u003e\n\u003cp\u003eVision is where this helmet spends a surprising amount of its budget. The outer screen is scratch-resistant, UV-resistant, wide-aperture and tool-free to change. Behind it is an integrated tinted sun visor that drops with a slider — the part that makes a touring helmet usable when you ride east in the morning and west in the evening. And a fully tinted second outer visor is supplied in the box for days when a drop-down shade is not enough.\u003c\/p\u003e\n\u003cp\u003eThe anti-fog insert is a Pinlock 120 MaxVision XLT, supplied rather than offered. It is worth knowing which one, because Pinlock lenses are not interchangeable: this is the XLT cut, part DKS433, and it is listed in the accessories below if you ever need a second. A fogged visor on a modular helmet is a particular nuisance — you can flip the chin bar, but then you are riding open in the rain.\u003c\/p\u003e\n\n\u003ch3\u003eIn at two ends, out at the back\u003c\/h3\u003e\n\u003cp\u003eThe vents are the practical half of this helmet's touring case. Chin intake for the visor and face, crown intake feeding channels moulded into the multi-density EPS, exhaust port at the rear to pull the air through, breath deflector to keep your own breath off the screen. All of it is adjustable and all of it is operable with winter gloves, which is not a given.\u003c\/p\u003e\n\u003cp\u003eThe reason the EPS channelling is worth mentioning is that plenty of helmets have vents that lead nowhere. Air enters the shell, meets the polystyrene, and stops. Cutting ducts through the liner foam is the difference between a vent you can feel on your scalp and one you can only see from the outside.\u003c\/p\u003e\n\n\u003ch3\u003eFit, and the honest word on two shells\u003c\/h3\u003e\n\u003cp\u003eTwo shell sizes cover seven helmet sizes: XS–L share one shell, XL–3XL the other. That is fewer than the three shells we list on the FF808, FF817 and FF820, and it has a real consequence — a size XS is built on a shell tooled around an L, so it carries more polystyrene than the size needs and looks a little larger on the head than a three-shell helmet would.\u003c\/p\u003e\n\u003cp\u003eThe reason is structural rather than cost-cutting. A modular shell has the chin-bar pivot, its locking mechanism and the sun-visor housing moulded into it, so every extra shell size means a substantially more complex and expensive tool. Two shells is the norm right across premium flip-ups. Where it matters is at the extremes: if you take an XS or an S and proportion is important to you, a three- or six-shell full-face will sit closer. Through the middle of the range — M, L and XL, where most riders sit — the difference is academic.\u003c\/p\u003e\n\n\u003ch3\u003eX-Static silver, and laser-cut foam\u003c\/h3\u003e\n\u003cp\u003eThe liner is finished with X-Static — a fabric with pure silver bonded to the fibre surface. Silver is naturally antimicrobial, so the treatment works on the bacteria that turn a helmet interior sour rather than masking the result, and because the silver is part of the fibre rather than a coating it survives washing. The whole interior is removable and machine-washable, hypoallergenic and breathable.\u003c\/p\u003e\n\u003cp\u003eThe cheek pads use laser-cut foam. Cutting with a laser rather than a die lets LS2 vary the density and contour within a single pad, which is how a pad can be firm enough to hold the helmet steady at the jaw and soft enough not to press on the cheekbone. If it ever needs adjusting, cheek pads are available in different thicknesses — the cheapest way to fine-tune a helmet that is otherwise the right size.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you buy an intercom\u003c\/h3\u003e\n\u003cp\u003eIntercom compatibility, stated honestly: this helmet works with the current LS2 communication system, and the base plate attaches with adhesive rather than a clamp. There is no bracket slot between shell and lining. If you have moved a clamp-mounted unit between helmets before, that habit does not transfer here.\u003c\/p\u003e\n\u003cp\u003eIt is worth understanding why rather than treating it as a limitation. Clamp mounts require a machined gap between the shell edge and the cheek pad; on a carbon laminate, cutting that gap introduces a discontinuity in the fibre. LS2's answer was to keep the shell intact and mount on the surface. Speaker recesses and a cable channel are built into the EPS, so the installation itself is tidy — just plan the position of the control unit before you press it down.\u003c\/p\u003e\n\n\u003ch3\u003eOn noise\u003c\/h3\u003e\n\u003cp\u003eNobody publishes a decibel figure for this helmet and we are not going to invent one. What can be said is where the noise comes from: turbulence at the base of the shell, air entering under the chin bar, and open vents. A chin curtain is fitted as standard, and it is the single most effective piece of quiet in the box — provided it stays in the helmet after you clean it. The chin bar rotating fully to the rear helps here: a modular bar parked on the crown sits in clean air and drums, while one lying behind the head does not.\u003c\/p\u003e\n\u003cp\u003eThe rest is not the helmet's doing. A tall screen that pushes dirty air straight at your head will make any lid loud, and a naked bike at 130 km\/h will beat the best-sealed helmet on the market. Earplugs remain the cheapest upgrade in motorcycling.\u003c\/p\u003e\n\n\u003ch3\u003e1550 grams on a flip-up\u003c\/h3\u003e\n\u003cp\u003eThe scales say 1550 g (±50 g). What makes that figure interesting is the type of helmet it belongs to. Flip-ups pay a structural tax — a hinge mechanism, a locking system, a drop-down sun visor and its housing, and a chin bar stiff enough to be certified as protective. All of it is mass, and most of it is mounted forward of your ears where a lever arm makes it feel heavier than it is.\u003c\/p\u003e\n\u003cp\u003eCarbon 6K in both the shell and the chin bar is how the tax gets paid. The result puts this helmet below most composite full-face touring lids and well below the flip-ups it competes with. Over a day it shows up as neck fatigue you do not have, which is a difficult thing to demonstrate in a shop and an obvious one at the end of a long ride.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it sits in our LS2 range\u003c\/h3\u003e\n\u003cp\u003eThis is the only flip-up in our LS2 line-up, so the comparison below is deliberately cross-type: it shows what the same money buys as a full-face, and what the folding chin bar costs in weight and price. Set against the FF811 Vector II Carbon — same carbon 6K, same manufacturer, 150 grams lighter — the Advant X asks 90 euros more for a chin bar that moves and a second homologation.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eShell\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eRRP\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFF817 Challenger II\u003c\/td\u003e\n\u003ctd\u003eFull-face\u003c\/td\u003e\n\u003ctd\u003eHPFC\u003c\/td\u003e\n\u003ctd\u003e1500 g\u003c\/td\u003e\n\u003ctd\u003efrom 329 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFF811 Vector II Carbon\u003c\/td\u003e\n\u003ctd\u003eFull-face\u003c\/td\u003e\n\u003ctd\u003eCarbon 6K\u003c\/td\u003e\n\u003ctd\u003e1400 g\u003c\/td\u003e\n\u003ctd\u003efrom 379 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFF901 Advant X (HPFC)\u003c\/td\u003e\n\u003ctd\u003eFlip-up (P\/J)\u003c\/td\u003e\n\u003ctd\u003eHPFC\u003c\/td\u003e\n\u003ctd\u003e1600 g\u003c\/td\u003e\n\u003ctd\u003efrom 399 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"is-this\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFF901 Advant X Carbon\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFlip-up (P\/J)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon 6K\u003c\/td\u003e\n\u003ctd\u003e1550 g\u003c\/td\u003e\n\u003ctd\u003efrom 469 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFF807 Dragon\u003c\/td\u003e\n\u003ctd\u003eFull-face\u003c\/td\u003e\n\u003ctd\u003eCarbon 6K\u003c\/td\u003e\n\u003ctd\u003e1450 g\u003c\/td\u003e\n\u003ctd\u003efrom 479 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFF805 Thunder\u003c\/td\u003e\n\u003ctd\u003eFull-face\u003c\/td\u003e\n\u003ctd\u003eCarbon\u003c\/td\u003e\n\u003ctd\u003e1280 g\u003c\/td\u003e\n\u003ctd\u003efrom 599 €\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhen something wears out\u003c\/h3\u003e\n\u003cp\u003eA helmet is not a sealed unit and the parts that wear are not the shell. Interiors compress, visors scratch, vent covers snap off in a car park. We stock the Advant X liner in every size, cheek pads in several thicknesses, six replacement visors from clear through to iridium gold, the tinted sun visor and its mechanism, plus the carbon chin curtain, complete replacement chin bars in every colourway, the chin-bar ratchet system, pins, plates and chin, top and rear vents in matt or gloss black.\u003c\/p\u003e\n\u003cp\u003eThat matters for how long the helmet lasts you. A liner that has taken a summer of sweat is the usual reason a helmet that once fitted starts to move on your head — and replacing it costs a fraction of replacing the helmet. The full parts list is in the FF901 Advant X Kit.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLS2 FF901 Advant X Carbon helmet — Future II Red\u003c\/li\u003e\n\u003cli\u003eCarrying backpack\u003c\/li\u003e\n\u003cli\u003eTinted visor\u003c\/li\u003e\n\u003cli\u003ePinlock® 120 MaxVision™ XLT anti-fog insert (DKS433)\u003c\/li\u003e\n\u003cli\u003eReflective stickers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eModel\u003c\/em\u003e — LS2 FF901 Advant X Carbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e — 569015632\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColour\u003c\/em\u003e — Future II Red — Future II graphic, gloss red over carbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eHomologation\u003c\/em\u003e — ECE 22.06, dual P\/J (protective and jet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eHelmet type\u003c\/em\u003e — Flip-up \/ modular, chin bar rotating 180° to the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eShell\u003c\/em\u003e — Carbon 6K, chin bar in carbon as well, two shell sizes (XS–L \/ XL–3XL)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e — 1550 g (±50 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSizes\u003c\/em\u003e — XS to 3XL (seven sizes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eVisor\u003c\/em\u003e — Twin Visor System, scratch-resistant, UV-stable, quick-release; tinted second visor supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eAnti-fog\u003c\/em\u003e — Pinlock® 120 MaxVision™ XLT (DKS433) supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSun visor\u003c\/em\u003e — integrated, tinted, drop-down\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eImpact liner\u003c\/em\u003e — multi-density EPS with moulded ventilation channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRetention\u003c\/em\u003e — micrometric metal buckle, reinforced chin strap, emergency release system\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eVentilation\u003c\/em\u003e — chin intake, top intake, rear exhaust port, breath deflector\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eLiner\u003c\/em\u003e — X-Static© silver antibacterial, laser-cut foam, hypoallergenic, breathable, removable and washable\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIntercom\u003c\/em\u003e — prepared for the LS2 intercom — adhesive mount only, no clamp slot\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LS2","offers":[{"title":"XS \/ Future II – Gloss Red","offer_id":53577215639818,"sku":"569015632_XS","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"S \/ Future II – Gloss Red","offer_id":53577215672586,"sku":"569015632_S","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"M \/ Future II – Gloss Red","offer_id":53577215705354,"sku":"569015632_M","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"L \/ Future II – Gloss Red","offer_id":53577215738122,"sku":"569015632_L","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"XL \/ Future II – Gloss Red","offer_id":53577215770890,"sku":"569015632_XL","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"XXL \/ Future II – Gloss Red","offer_id":53577215803658,"sku":"569015632_XXL","price":2847.0,"currency_code":"CNY","in_stock":true},{"title":"XXXL \/ Future II – Gloss Red","offer_id":53577215836426,"sku":"569015632_XXXL","price":2847.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/569015632_01.png?v=1787836838","url":"https:\/\/inter-pace.com\/en-cn\/products\/ls2-ff901-advant-x-carbon-future-ii-red-helmet","provider":"Inter-Pace","version":"1.0","type":"link"}