TGP MotoRacing Hyperdiscs aluminium clutch drive plates for Yamaha YZF-R6⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandTGP MotoRacing
Product nameHyperdiscs
MaterialAluminium (coated)
Clutch typeWet / oil-bath clutch (OEM)
Quantity supplied8 aluminium drive plates
Disc configuration6 × 2.0 mm + 2 × 3.0 mm
Total clutch pack thickness16.0 mm
Spline tooth count27 teeth
Outer diameterØ 132.8 mm
Inner diameterØ 119.8 / 109.9 mm
DescriptionThe whole story▼

The Yamaha YZF-R6 is one of the most demanding supersport machines ever built, and its wet clutch is a critical interface between rider intent and rear-wheel traction. TGP MotoRacing's Hyperdiscs replace the factory steel friction drive plates with precision-coated aluminium discs, reducing rotating mass in the clutch pack significantly — the result is a clutch that responds with greater immediacy, runs cooler under sustained hard use, and delivers a more consistent bite point whether you are chasing lap records or threading through traffic.

Key Features

  • Aluminium construction replaces OEM steel drive plates — measurably lower rotating mass for reduced inertia throughout the drivetrain
  • Improved heat dissipation compared to steel — maintains a consistent clutch feel across multiple hard braking zones and extended track sessions
  • Precise 16.0 mm total pack thickness (6 × 2.0 mm + 2 × 3.0 mm configuration) engineered to exact OEM stack dimensions for clean disengagement and a reliable engagement point
  • 27-tooth spline profile with outer diameter Ø 132.8 mm and inner diameters Ø 119.8 / 109.9 mm — drop-in fitment, no machining required
  • Exclusive compatibility with the original Yamaha wet/oil-bath clutch assembly — ensures correct clamping load and clutch basket clearance are maintained
  • Suitable for both road and track use — an accessible performance upgrade for club-level racers and serious road riders alike

Why Reduced Rotating Mass Matters on the R6

At the stratospheric rev ceiling the YZF-R6 operates at, every gram of rotating mass in the clutch pack costs measurable engine response. Replacing steel with aluminium in the drive plate stack cuts rotational inertia where it counts most. On the road and on the circuit, this translates into a suite of felt improvements that become apparent immediately after fitting.

  • Faster engine rev response — the motor spins up with noticeably less resistance
  • More direct throttle pickup at corner exit — reduced inertia means the power arrives sooner and more cleanly
  • A calmer rear end under hard trail braking — less clutch-pack drag during deceleration
  • Reduced snatching tendency on aggressive downshifts — the lighter stack decelerates more freely during blipped changes
  • More consistent clutch feel in extended sessions — improved thermal management keeps the engagement point stable

Fitment & Engineering Precision

TGP MotoRacing engineered the Hyperdiscs specifically for the R6's OEM clutch basket. The 16.0 mm total pack thickness mirrors the factory specification precisely, ensuring the pressure plate seats correctly and the clutch spring pre-load remains within the designed range. There is no guesswork, no shimming, and no modification to the basket or pressure plate required.

For best results and the most consistent engagement point, TGP MotoRacing recommends fitting new or near-new friction (cork) plates alongside the Hyperdiscs. Running fresh friction plates with the aluminium drive plates produces a clutch pack that is both highly responsive and durable — the ideal combination for track-day regulars and competitive club racing.

Important: these discs are compatible exclusively with the original, unmodified Yamaha clutch assembly. They are not suitable for aftermarket clutch baskets or modified clutch systems of any kind.

Fitment & Compatibility

  • Yamaha YZF-R6 RJ11 (2006–2007)
  • Yamaha YZF-R6 RJ15 (2008–2009)
  • Yamaha YZF-R6 RJ27 (2017–2026)
  • Model years covered: 2006–2026

Specifications

Property Detail
Brand TGP MotoRacing
Product name Hyperdiscs
Material Aluminium (coated)
Clutch type Wet / oil-bath clutch (OEM)
Quantity supplied 8 aluminium drive plates
Disc configuration 6 × 2.0 mm + 2 × 3.0 mm
Total clutch pack thickness 16.0 mm
Spline tooth count 27 teeth
Outer diameter Ø 132.8 mm
Inner diameter Ø 119.8 / 109.9 mm
Fitment Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006–2026)
What's includedEverything in the box▼
  • 8x aluminium drive plates (Hyperdiscs)
FitmentWhich bikes this fits▼
  • Yamaha YZF-R6 RJ11, RJ15 & RJ27 (2006–2026)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.