Sitta 202M aluminium rear sprocket for Yamaha YZF-R1/M RN32/RN49 RN65 2015-2026, 520 pitch⟲ 360° — drag me
350 g
02 · Data & docs

The facts.

Technical data
BrandSitta
Part number202M
MaterialAluminium
Weightapprox. 350 g (45-tooth)
Chain pitch520
Available teeth37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47
Sprocket carrier112/138 — 5-bolt
Available coloursSilver, Black, Hard-anodised, Blue, Red, Gold, Green, Orange
FitmentYamaha YZF-R1/M RN32/RN49/RN65 (2015-2026)
DescriptionThe whole story▼

Sitta's 202M rear sprocket brings race-proven aluminium engineering and a striking eight-colour palette to the Yamaha YZF-R1 and YZF-R1M, covering every RN32, RN49 and RN65 chassis from 2015 through 2026. Weighing just 350 g in 45-tooth trim, it is the kind of component that earns its place on a World Superbike-derived machine — lightweight where it matters, precise in its fit, and available in a tooth range wide enough to transform the character of the bike entirely.

Key Features

  • Ultra-light aluminium construction — only 350 g (45-tooth size), reducing unsprung and rotating mass for sharper throttle response
  • Eight anodised finishes available: silver, black, hard-anodised, blue, red, gold, green and orange — hard-anodised option outlasts standard anodising for extended service life
  • Full tooth range from 37 to 47 teeth in 520 pitch, allowing precise gearing adjustment for road or track use
  • Sprocket carrier spec 112/138 — 5-bolt mount for accurate, rattle-free installation on RN32, RN49 and RN65 frames
  • Engineered for low wear under sustained high load, suitable for race-track duty and spirited road riding alike
  • Part number 202M — a catalogued Sitta reference for straightforward ordering and reordering

Finish, Design and Heritage

Sitta has supplied drivetrain components to the racing paddock for decades, and the 202M reflects that lineage in every detail. The anodised surface does more than look the part: it hardens the aluminium against the constant abrasion of chain contact and the thermal cycling that comes with track sessions. The hard-anodised variant goes a step further, producing a surface harder than standard anodising and significantly more resistant to wear — an important consideration when you are running a lightweight 520-pitch setup at sustained high revs.

The colour range — silver, black, hard-anodised, blue, red, gold, green and orange — means the 202M sits naturally alongside aftermarket wheels, caliper finishes and frame details without looking like an afterthought. Each finish is applied with the same dimensional precision, so whichever colour you select, the sprocket runs true on the 112/138 five-bolt carrier.

Gearing Strategy

The 520-pitch chain standard is the natural choice for a performance-oriented R1 build, offering a meaningful weight saving over the stock 530 pitch while maintaining the tensile strength needed for track use. Within that pitch, the 202M gives you eleven tooth options to dial in exactly the gearing character you want.

  • Smaller sprockets (37-42 teeth): shorter overall gearing, raising top speed potential and reducing engine revs on fast, open circuits or motorway stretches
  • Larger sprockets (43-47 teeth): taller overall gearing, sharpening acceleration out of slow corners and making the power more accessible in technical, stop-start sections

The right choice depends on your circuit, riding style and whether the bike also sees road use — but the range covered by the 202M means you can fine-tune without compromise.

Fitment & Compatibility

  • Yamaha YZF-R1 RN32 / RN49 / RN65 (2015-2026)
  • Yamaha YZF-R1M RN32 / RN49 / RN65 (2015-2026)
  • Compatible with 520 pitch chain only
  • Sprocket carrier: 112/138 — 5-bolt

Specifications

Attribute Detail
Brand Sitta
Part number 202M
Material Aluminium
Weight approx. 350 g (45-tooth)
Chain pitch 520
Available teeth 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47
Sprocket carrier 112/138 — 5-bolt
Available colours Silver, Black, Hard-anodised, Blue, Red, Gold, Green, Orange
Fitment Yamaha YZF-R1/M RN32/RN49/RN65 (2015-2026)
FitmentWhich bikes this fits▼
  • Yamaha YZF-R1/M RN32/RN49 & RN65 (2015–2026)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.