{"product_id":"ohlins-shock-spring-290-n-mm-130-mm-57-mm-01104-94","title":"Öhlins Shock Spring 290 N\/mm \/ 130 mm \/ Ø 57 mm – 01104-94","description":"\u003cp\u003eÖhlins part number 01104-94 is a shock absorber spring rated at 290 N\/mm, 130 mm long with a 57 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e47 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eFree length 130 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 290 N\/mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01104-94\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins winds, heat-sets and then measures every spring individually — the rate on the label is the rate you get. Öhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. Öhlins machines its own critical components instead of buying them in, and the tolerances are where the money goes.\u003c\/p\u003e\u003ch2\u003eThe Numbers That Matter\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 130 mm and the inner diameter at 57 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eFirm rates also suit machines carrying luggage as a matter of course. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. This end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eÖhlins sells rear springs separately precisely because rider weight varies more than machine weight does. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it. A shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. Sag figures, not feel, decide whether a rate is right. Öhlins publishes the targets for its own units. A workshop will pick this spring from its dimensions and the rider's weight, not from a fitment table.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eThe job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level. Any suspension workshop can fit these; the fork does not need to leave the bike for long. A spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01104-94\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 290 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 47 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645350797578,"sku":"01104-94","price":288000.0,"currency_code":"CDF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_7373ba61-f8bc-49bb-becb-ed901f88f962.png?v=1788866725","url":"https:\/\/inter-pace.com\/en-cd\/products\/ohlins-shock-spring-290-n-mm-130-mm-57-mm-01104-94","provider":"Inter-Pace","version":"1.0","type":"link"}