The facts.
| Brand | LighTech |
|---|---|
| Part number | OBT008 |
| Type | Reservoir bracket, front |
| Height | 60.6 mm |
| Projection | 90.3 mm |
| Material | Anodised aluminium |
| Finish | Black only |
| Fits reservoirs | OBT001, OBT006, OBT007 |
| Weight | 10 g |
| Fitment | Honda CB1000R (2008 to 2026) |
DescriptionThe whole story▼
A naked CB1000R shows the mount as clearly as it shows the tank. The OBT008 is the front bracket: 60.6 mm by 90.3 mm, black anodised, 10 g. There is no colour choice here — the OBT008 is black. The 999 cc CB1000R takes it with the standard fittings.
Key Features
- Reversible — the original part goes back on the CB1000R any time
- Decides where the reservoir ends up on the CB1000R
- Steel-free so nothing corrodes into the CB1000R fitting
- It is the smallest line on the order
- Made in Italy
- The OBT008 is machined from solid, not cast or pressed
Maintenance
Check the bracket fasteners on the CB1000R at the same interval as the bar clamps. Nothing else about the OBT008 wears in normal use.
Why the Bracket Matters
Position decides whether the hose runs clean or kinks on a CB1000R. The OBT008 sets the reservoir at 60.6 mm height with 90.3 mm of projection. One bracket per reservoir — the CB1000R needs the tank ordered alongside.
Fitment and Compatibility
The listing is for the CB1000R and the years 2008 to 2026. LighTech lists it as adaptable rather than model-specific, so check the position on the CB1000R first.
In the Workshop
The OBT008 replaces an existing part on the CB1000R rather than adding one. Mount it so the reservoir sits above the master cylinder on the CB1000R, never below. Nothing on the CB1000R is drilled or cut.
What Is in the Box
The OBT008 is supplied as a single bracket with its fasteners. The part number is all you need to quote for a repeat order on the CB1000R.
What You Also Need
LighTech sells this mount on its own. It carries the LighTech reservoirs OBT001, OBT006 and OBT007, which are ordered separately. A complete installation on the CB1000R is one tank plus one bracket.
Regulations and the Hydraulic Circuit
On a CB1000R this component carries brake or clutch fluid under pressure. LighTech does not certify the OBT008 for road use, and neither do we. If the CB1000R is used on public roads, treat this as a brake-system modification: inspection body first, workshop check after.
Specifications
- Brand: LighTech
- Part number: OBT008
- Type: Reservoir bracket, front
- Height: 60.6 mm
- Projection: 90.3 mm
- Material: Anodised aluminium
- Finish: Black only
- Fits reservoirs: OBT001, OBT006, OBT007
- Weight: 10 g
- Fitment: Honda CB1000R (2008 to 2026)
FitmentWhich bikes this fits▼
- Honda CB1000R (2008 to 2026)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.