I2M ABS Eliminator for Yamaha YZF-R1/M RN32 RN49 (2015-2019) – Track-Ready ABS Delete

Stripping a Yamaha YZF-R1 or R1M down to its racing essentials demands electronics solutions that match the bike's own precision. The I2M ABS Eliminator lets you remove the ABS control unit from your RN32 or RN49 cleanly and completely, with no error codes, no warning lights, and no compromise to the rest of the electronic suite — exactly what a serious trackday or race-built R1 requires.

Key Features

• Fits Yamaha YZF-R1 and R1M RN32 / RN49 (2015–2019) — purpose-engineered for these specific chassis generations
• Plug-and-play installation: no cutting, no soldering, no wiring harness modifications required
• Emulates the original wheel-speed sensor signals so traction control, launch control and other dependent systems continue to operate correctly after ABS removal
• Suppresses fault codes and dashboard warning messages that would otherwise be triggered by the missing ABS unit
• Extremely compact and lightweight construction — ideal for weight-saving track conversions
• Designed exclusively for closed-circuit racing and trackday use

Engineered for the R1 Track Conversion

The Yamaha YZF-R1 and R1M in RN32 and RN49 guise are among the most capable factory superbikes ever built for circuit work. When building one of these machines into a dedicated trackbike, every unnecessary component becomes a liability — weight, complexity, and potential failure points all count against you on the stopwatch. Removing the ABS unit is a logical step, but doing it carelessly on a bike with this level of electronic integration invites a cascade of ECU faults.

The I2M ABS Eliminator solves this problem at the source. Rather than simply disconnecting the ABS module and accepting the consequences, it replicates the relevant sensor signals that the rest of the R1's electronics expect to see. The result is a clean, professional deletion that leaves the bike's other systems — including the YZF-R1's sophisticated traction and launch control — functioning as intended.

Plug-and-Play Installation, No Harness Compromise

On a bike as electronically dense as the R1/M, the quality of any wiring modification matters enormously. The I2M Eliminator connects directly to the existing connectors in place of the removed ABS unit. There is no need to cut wires, crimp new terminals, or solder any joints. The original harness remains untouched, which preserves reliability and keeps future changes straightforward. For riders who demand a technically correct build rather than a workaround, this is the only acceptable approach.

Who This Product Is For

The I2M ABS Eliminator is the right choice if you are:

• Building a Yamaha YZF-R1 or R1M specifically for track and circuit use
• Looking for a clean, no-compromise ABS delete without improvised wiring solutions
• Committed to plug-and-play installation that leaves the original harness intact
• Wanting to retain correct operation of the remaining electronics after removing the ABS unit
• Optimising weight and reducing complexity for race-focused R1 conversions

Important Notice

This product is intended exclusively for closed-circuit racing and trackday use. It is not approved for use on public roads.

Fitment & Compatibility

The I2M ABS Eliminator is developed specifically for the following models:

• Yamaha YZF-R1 RN32 (2015–2019)
• Yamaha YZF-R1M RN49 (2015–2019)

Specifications