Accossato footpegs FT102 for Ducati Hyperstrada 939 (2016-2017)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeTouring footpegs, CNC-machined aluminium
Part numberFT102
VersionsFront footpegs, Rear footpegs
FitmentDucati Hyperstrada 939 (2016–2017)
Road approvalNone documented, track use only
InstallationWorkshop fitting recommended; adjust linkages and check the brake light
DescriptionThe whole story▼

The Ducati Hyperstrada 939 turns Ducati's supermoto-styled road bike towards touring, and it is made for covering distance whatever the weather. Its footpegs take a beating from that kind of use: road spray, salt, mud and the constant rub of boots. How long such parts keep looking good depends partly on how they are made and partly on how they are cleaned. Accossato's FT102 touring footpegs for the Hyperstrada 939 of 2016 to 2017 are CNC-machined aluminium with black anodising and a red insert, and a notch in the peg gives boots more grip.

Key Features

  • Touring footpegs for the Ducati Hyperstrada 939, 2016–2017
  • Aluminium, shaped by CNC machining
  • Black anodised surface with a red insert
  • Notch for extra boot grip
  • Front or rear footpegs, sold separately
  • Replace the original footpegs
  • No German ABE on record; for track use

Construction and Material Quality

Aluminium does not form red rust the way steel does, but bare aluminium can oxidise and pit when salt and moisture sit on it for long. Anodising protects against most of that: the process converts the surface into a hard, dense oxide layer, and on the FT102 that layer is dyed black. A red insert breaks up the black. Accossato shapes the pegs on CNC machines and adds a notch that helps the sole of a boot stay in place, whether you ride with dry or soaked boots.

Looking After Anodised Pegs

Anodised surfaces are tough, but they have one weakness: strongly alkaline or acidic cleaners can dull the finish or bleach the colour, and many wheel cleaners and heavy-duty degreasers fall into that category. When the Hyperstrada 939 comes home covered in road dirt, rinse the pegs with plenty of fresh water first, then clean them with a mild motorcycle shampoo and a soft brush that reaches into the notch. Rinse again and dry. In winter, when salt is on the roads, do this sooner rather than later, as salt left to sit can mark the surface over time. Keep a pressure washer at a respectful distance so it does not drive water and grit into the mountings. Scuffs from boots are normal on any footpeg and do not affect how the notch works. If the black wears through at one spot after many seasons, that is simply the metal showing where your feet have rested most.

Fitment and Compatibility

Accossato lists the FT102 for the Hyperstrada 939 of 2016 and 2017: the standard bike and the US version of 2016, and a Thai version that continues into 2017. Ask a workshop to fit the pegs, with fasteners tightened to Ducati's specified values and thread locker applied where the manual says so, and check afterwards that the gear lever and brake pedal suit your boots on the Hyperstrada 939.

Road Approval

For the FT102 there is no German ABE or Teilegutachten we could document. We sell the footpegs for track use; for road riding in Germany the original pegs remain fitted.

Scope of Delivery

One FT102 touring footpeg set by Accossato for the Hyperstrada 939, front or rear as ordered.

Specifications

  • Type: Touring footpegs, CNC-machined aluminium
  • Part number: FT102
  • Versions: Front footpegs, Rear footpegs
  • Fitment: Ducati Hyperstrada 939 (2016–2017)
  • Road approval: None documented, track use only
  • Installation: Workshop fitting recommended; adjust linkages and check the brake light
What's includedEverything in the box▼
  • 1x Accossato footpeg set
FitmentWhich bikes this fits▼
  • Ducati Hyperstrada 939 (2016–2017)
  • Ducati HYPERMOTARD 821 (2013–2016)
  • Ducati HYPERMOTARD 939 (2016–2019)
  • Ducati HYPERMOTARD 950 (2019)
  • Ducati HYPERMOTARD 950 SP (2019)
  • Ducati Hyperstrada 821 (2013–2017)
  • Ducati MULTISTRADA 1200 (2011–2018)
  • Ducati MULTISTRADA 1200 ENDURO (2016–2019)
  • Ducati MULTISTRADA 1200 S (2011–2018)
  • Ducati MULTISTRADA 1260 (2018–2020)
  • Ducati MULTISTRADA 1260 ENDURO (2019–2020)
  • Ducati MULTISTRADA 1260 S (2018–2020)
  • Ducati MULTISTRADA 1260 S D AIR (2018–2020)
  • Ducati MULTISTRADA 950 (2017–2020)
  • Ducati SCRAMBLER 1100 (2018–2019)
  • Ducati SCRAMBLER 1100 SPECIAL (2018–2019)
  • Ducati SCRAMBLER 1100 SPORT (2018–2019)
  • KTM 690 DUKE (2012–2019)
  • KTM 690 DUKE R (2013–2017)
  • KTM 790 DUKE (2018–2022)
  • KTM 890 DUKE (2021–2023)
  • KTM 890 DUKE L (2021)
  • KTM 890 DUKE R (2020–2023)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.