Accossato rear axle sliders PP019 for Yamaha R1, black
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeRear axle sliders (swingarm protection)
Part numberPP019
MaterialAluminium and plastic
Pieces2 (one per side)
Fitting kitSpacers, screws and all fitting parts included (Accossato)
ColourBlack
FitmentYamaha R1 (2015–2018)
Road approvalNone documented, track use only
CheckCompare with the application list before ordering
DescriptionThe whole story▼

Behind the R1's cross-plane engine sits a chassis built to put power down out of slow corners, and that same ability to spin the rear tyre under hard acceleration can catch an overconfident rider on a damp or cold track surface. A rear-end slide that starts as a small step out of the seat can escalate quickly if the throttle stays open a moment too long, ending with the bike sliding away from underneath its rider rather than simply running wide. Accossato lists the PP019 rear axle sliders for the R1 of 2015 to 2018.

Key Features

  • Rear axle sliders for the Yamaha R1, 2015 to 2018
  • Accossato PP019, a left and a right protector
  • Aluminium and plastic construction, black
  • Spacers, screws and remaining mounting parts in the kit, as stated by Accossato
  • PF046 front sliders and TP018/TP025 crash pads also listed for this bike
  • Sacrificial parts, renewed after a heavy impact
  • Same pair listed for the MT-10, MT-10 SP and R1M
  • No German ABE documented; offered for racing

Construction and Material Quality

Both PP019 protectors share the same aluminium-and-plastic build in black, sized for the left and right side at the rear of the R1. According to Accossato, the box also holds the spacers, screws and whatever else mounting calls for. Should a rear-end step under hard acceleration turn into a genuine slide, these sliders are positioned to reach the ground ahead of the swingarm and the rear axle area, taking some of what those parts would otherwise suffer. Once a slider has clearly done that job, swap it for a new one rather than trusting it a second time.

A Rear-End Step That Goes Too Far

Modern electronics help manage wheelspin on the R1, but they cannot remove the fundamental fact that a cross-plane engine delivers its power in a way that can overwhelm the rear tyre's grip on a cold or damp track, particularly out of slower corners where the throttle opens hardest. A small step from the rear is often recoverable, and experienced riders use it deliberately, but a step that continues past a certain point becomes a genuine slide, and the bike can go down before the rider has time to shut the throttle fully. The sliders at the rear exist for that outcome, taking the first contact so the swingarm and the rear axle area are spared some of it. After such a fall, a careful check of the chain, the sliders and the swingarm is needed before the R1 returns to the track.

Fitment and Compatibility

The years behind the PP019 on an R1 run from 2015 to 2018 by Accossato's own account, and we have kept to that span. The PF046 sliders take care of the front, and the fairing itself can be fitted with either the TP018 or the newer TP025 pads depending on the bike's age. This rear slider is also catalogued in our shop for the MT-10, the MT-10 SP and the R1M. Ask us to check your R1 before ordering if the years do not clearly match.

Road Approval

No ABE or test mark has been supplied to us for the PP019, so we list it for racing and competition purposes.

Scope of Delivery

Two black PP019 rear axle sliders, one per side, together with the spacers, screws and remaining mounting parts Accossato includes.

Specifications

  • Type: Rear axle sliders (swingarm protection)
  • Part number: PP019
  • Material: Aluminium and plastic
  • Pieces: 2 (one per side)
  • Fitting kit: Spacers, screws and all fitting parts included (Accossato)
  • Colour: Black
  • Fitment: Yamaha R1 (2015–2018)
  • Road approval: None documented, track use only
  • Check: Compare with the application list before ordering
What's includedEverything in the box▼
  • 2x Accossato rear axle slider
FitmentWhich bikes this fits▼
  • Yamaha R1 (2015–2018)
  • Yamaha MT-10 (2016–2018)
  • Yamaha MT-10 SP (2017–2018)
  • Yamaha R1M (2015–2018)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.